philipma1957
Legendary
Offline
Activity: 4242
Merit: 8468
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 29, 2017, 01:34:06 PM |
|
This is a short version of first post with links to the nv0019 download. I have yet to download nv0019 will do so today.
|
|
|
|
MATHReX
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 29, 2017, 01:34:44 PM |
|
Hi all, Hopefully this is not too off-topic, but in trying to get the latest ethminer working in nvOC (at the speeds expected for my GTX 1060 6gb cards), I had also been posting on their Github page. I am trying to figure out a few things, and would love to hear what you all have to say: - Someone on that thread suggested that with Linux-based mining, the overclock settings for memory people throw around (which, most things I read are for Windows) need to be doubled. As in, people usually say Samsung memory can get around an 850 memory OC, so they were saying for Ubuntu I would go with 1700? This felt wrong given the 1bash defaults, but I'd love verification
- Is there any way anyone knows, without doing a Windows install, to learn what kind of memory my cards have? I'd rather not install Windows, and I have 26 cards I'd like to verify without changing their order or disconnecting if possible. I have not been successful in finding a Linux utility, but feel I may benefit from indvidual clock tuning
- Has anyone gotten the 24-25 Mh/s the latest ethminer supposedly gets while using in nvOC? If so, what settings are you using?
I appreciate the input, as well as the fact that this build even exists, so any help here would be amazing. Hi JudoFlash, - You are totally right for memory in linux, cause in linux u dont OC MemClock technically you OC MemoryTransferRate. MemClock = MemoryTransferRate % 2
- Unfortunately on linux we don't have software that allow you to get memory brand version, easy way to do this is to boot your rig on a single windows card per card
![Wink](https://bitcointalk.org/Smileys/default/wink.gif) - For this last one i dont have 1060, but i bet with nice OC u can grab this one. Remember to negative your CoreClock when u mine ETH
![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
Don't hesitate to ask more ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Well, Thank you for that explanation. I was trying to figure out on how the actual OC works on Linux but your post made it clear.
|
|
|
|
damNmad
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 378
Merit: 104
nvOC forever
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 29, 2017, 02:14:08 PM |
|
Is it normal that every time upPASTE reload config it start a new instance of 1bash ? m1@m1-desktop-102:~$ ps aux | grep 1bash m1 2201 0.0 0.0 13320 3876 pts/16 S+ 11:43 0:00 bash /home/m1/1bash m1 4482 0.0 0.0 13328 3840 pts/23 S+ 12:14 0:00 bash /home/m1/1bash m1 18432 0.0 0.0 13328 3836 pts/24 S+ 16:18 0:00 bash /home/m1/1bash
m1@m1-desktop-101:~$ ps aux | grep 1bash m1 13545 0.0 0.0 13324 3888 pts/17 S+ 16:23 0:00 bash /home/m1/1bash m1 13546 0.0 0.0 13332 3820 pts/23 S+ 16:23 0:00 bash /home/m1/1bash m1 13547 0.0 0.0 13328 3892 pts/21 S+ 16:23 0:00 bash /home/m1/1bash
Problem is some times it create multiple miners : m1@m1-desktop-101:~$ screen -r miner There are several suitable screens on: 14358.miner (08/29/17 16:23:44) (Detached) 14348.miner (08/29/17 16:23:44) (Detached) Type "screen [-d] -r [pid.]tty.host" to resume one of them.
and multiple temp too m1@m1-desktop-101:~$ screen -r temp There are several suitable screens on: 13837.temp (08/29/17 16:23:36) (Detached) 13830.temp (08/29/17 16:23:36) (Detached) 13823.temp (08/29/17 16:23:36) (Detached) Type "screen [-d] -r [pid.]tty.host" to resume one of them.
The multiple miners only happens on one of my rigs, the other one dont have this issue. Both has multiple 1bash running but one make multiple miners. Sorry if I misunderstand. In v19 you need to run 3main instead of 1bash or run 2unix to refresh the whole no you don't, you just run 1bash as normal, 1bash has been split into 2 parts (1bash and 3main), where 1bash is a config file and 3main holds all the back end (for people who are not interested in editing it)
|
|
|
|
papampi
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 29, 2017, 03:40:19 PM |
|
Is it normal that every time upPASTE reload config it start a new instance of 1bash ? m1@m1-desktop-102:~$ ps aux | grep 1bash m1 2201 0.0 0.0 13320 3876 pts/16 S+ 11:43 0:00 bash /home/m1/1bash m1 4482 0.0 0.0 13328 3840 pts/23 S+ 12:14 0:00 bash /home/m1/1bash m1 18432 0.0 0.0 13328 3836 pts/24 S+ 16:18 0:00 bash /home/m1/1bash
m1@m1-desktop-101:~$ ps aux | grep 1bash m1 13545 0.0 0.0 13324 3888 pts/17 S+ 16:23 0:00 bash /home/m1/1bash m1 13546 0.0 0.0 13332 3820 pts/23 S+ 16:23 0:00 bash /home/m1/1bash m1 13547 0.0 0.0 13328 3892 pts/21 S+ 16:23 0:00 bash /home/m1/1bash
Problem is some times it create multiple miners : m1@m1-desktop-101:~$ screen -r miner There are several suitable screens on: 14358.miner (08/29/17 16:23:44) (Detached) 14348.miner (08/29/17 16:23:44) (Detached) Type "screen [-d] -r [pid.]tty.host" to resume one of them.
and multiple temp too m1@m1-desktop-101:~$ screen -r temp There are several suitable screens on: 13837.temp (08/29/17 16:23:36) (Detached) 13830.temp (08/29/17 16:23:36) (Detached) 13823.temp (08/29/17 16:23:36) (Detached) Type "screen [-d] -r [pid.]tty.host" to resume one of them.
The multiple miners only happens on one of my rigs, the other one dont have this issue. Both has multiple 1bash running but one make multiple miners. Sorry if I misunderstand. In v19 you need to run 3main instead of 1bash or run 2unix to refresh the whole no you don't, you just run 1bash as normal, 1bash has been split into 2 parts (1bash and 3main), where 1bash is a config file and 3main holds all the back end (for people who are not interested in editing it) this is on v0018, not migrating to 19 yet.
|
|
|
|
helpme85
Newbie
Offline
Activity: 31
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 29, 2017, 04:23:29 PM |
|
Is it normal that every time upPASTE reload config it start a new instance of 1bash ? m1@m1-desktop-102:~$ ps aux | grep 1bash m1 2201 0.0 0.0 13320 3876 pts/16 S+ 11:43 0:00 bash /home/m1/1bash m1 4482 0.0 0.0 13328 3840 pts/23 S+ 12:14 0:00 bash /home/m1/1bash m1 18432 0.0 0.0 13328 3836 pts/24 S+ 16:18 0:00 bash /home/m1/1bash
m1@m1-desktop-101:~$ ps aux | grep 1bash m1 13545 0.0 0.0 13324 3888 pts/17 S+ 16:23 0:00 bash /home/m1/1bash m1 13546 0.0 0.0 13332 3820 pts/23 S+ 16:23 0:00 bash /home/m1/1bash m1 13547 0.0 0.0 13328 3892 pts/21 S+ 16:23 0:00 bash /home/m1/1bash
Problem is some times it create multiple miners : m1@m1-desktop-101:~$ screen -r miner There are several suitable screens on: 14358.miner (08/29/17 16:23:44) (Detached) 14348.miner (08/29/17 16:23:44) (Detached) Type "screen [-d] -r [pid.]tty.host" to resume one of them.
and multiple temp too m1@m1-desktop-101:~$ screen -r temp There are several suitable screens on: 13837.temp (08/29/17 16:23:36) (Detached) 13830.temp (08/29/17 16:23:36) (Detached) 13823.temp (08/29/17 16:23:36) (Detached) Type "screen [-d] -r [pid.]tty.host" to resume one of them.
The multiple miners only happens on one of my rigs, the other one dont have this issue. Both has multiple 1bash running but one make multiple miners. Sorry if I misunderstand. In v19 you need to run 3main instead of 1bash or run 2unix to refresh the whole no you don't, you just run 1bash as normal, 1bash has been split into 2 parts (1bash and 3main), where 1bash is a config file and 3main holds all the back end (for people who are not interested in editing it) At v19 1bash is only a configuration file, there is absolutely no command to run the application in it: D
|
|
|
|
JudoFlash
Newbie
Offline
Activity: 28
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 29, 2017, 08:44:33 PM |
|
Hello again, Once more, I am unsure if this is quite nvOC on-topic or not, but with so many variables to a mining rig, and as helpful as everyone has been, I am giving it a shot. I currently have two ASRock H110 BTC+ Pro boards, each running 13 GTX 1060 6GB GPU's. It took me a while to get there, but after checking connections, settings, etc. I have one of these that has been mining ETH rock-solid for over a week now on ethminer (it isn't getting the nice boost I expected, but c'est la vie). The second setup, however, I cannot seem to get to stay running. I swapped out the risers and get 13 GPU's showing every time now, switched to v0019, and generally can boot, mine for a few hours, then freeze. Of course when I am frozen there is not a lot I can do from a diagnostic perspective to figure out what might have gone wrong. I had thought given the fact that I would get a couple of hours might mean a temperature issue, but I don't know really. I just took a picture of the crashed rig (while it might look fine, it is frozen): https://s26.postimg.org/4ybqdi7s9/2017-08-29_16.02.08.jpgI am not close to maxing out my PSU's, I am using powered risers that I believe are all getting power (no more than 2 per cable), and I have tried swapping out risers, My OC is not aggressive, with the core being underclocked by 200, and memory OC at only 500. Temperature was dialed back to 70c max, with the power max at 75w per card. Does anyone have any idea what I might try next for a stable system. I had reset the machine when I took that screenshot 40 minutes ago, and the rig just froze again. Any suggestions would be amazing. Thanks!
|
|
|
|
VoskCoin
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 29, 2017, 08:57:02 PM |
|
What is the process of remoting in w/ nvoc19
|
|
|
|
papampi
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 29, 2017, 09:14:27 PM |
|
Hello again, Once more, I am unsure if this is quite nvOC on-topic or not, but with so many variables to a mining rig, and as helpful as everyone has been, I am giving it a shot. I currently have two ASRock H110 BTC+ Pro boards, each running 13 GTX 1060 6GB GPU's. It took me a while to get there, but after checking connections, settings, etc. I have one of these that has been mining ETH rock-solid for over a week now on ethminer (it isn't getting the nice boost I expected, but c'est la vie). The second setup, however, I cannot seem to get to stay running. I swapped out the risers and get 13 GPU's showing every time now, switched to v0019, and generally can boot, mine for a few hours, then freeze. Of course when I am frozen there is not a lot I can do from a diagnostic perspective to figure out what might have gone wrong. I had thought given the fact that I would get a couple of hours might mean a temperature issue, but I don't know really. I just took a picture of the crashed rig (while it might look fine, it is frozen): ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fs26.postimg.org%2F4ybqdi7s9%2F2017-08-29_16.02.08.jpg&t=665&c=cT3VVscM9A4nDw) I am not close to maxing out my PSU's, I am using powered risers that I believe are all getting power (no more than 2 per cable), and I have tried swapping out risers, My OC is not aggressive, with the core being underclocked by 200, and memory OC at only 500. Temperature was dialed back to 70c max, with the power max at 75w per card. Does anyone have any idea what I might try next for a stable system. I had reset the machine when I took that screenshot 40 minutes ago, and the rig just froze again. Any suggestions would be amazing. Thanks! Disable teamviewer and check. Its linux, better use ssh when u need to do anything.
|
|
|
|
JudoFlash
Newbie
Offline
Activity: 28
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 29, 2017, 09:21:53 PM |
|
Interesting. Thank you - I will try that.
I guess I will need to learn how to SSH.
|
|
|
|
slackert
Newbie
Offline
Activity: 53
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 29, 2017, 09:36:24 PM |
|
v0019 working solid so far. I jumped from v0017 so I missed some of the v0018 features.
I turned on Watchdog but I'm not sure if I need to tweak any settings. Is it as simple as just selecting "YES" in the one bash or do I need to change the settings in the IAmNotAJeep_and_Maxximus007_WATCHDOG file?
|
|
|
|
damNmad
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 378
Merit: 104
nvOC forever
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 29, 2017, 09:39:59 PM |
|
v0019 working solid so far. I jumped from v0017 so I missed some of the v0018 features.
I turned on Watchdog but I'm not sure if I need to tweak any settings. Is it as simple as just selecting "YES" in the one bash or do I need to change the settings in the IAmNotAJeep_and_Maxximus007_WATCHDOG file?
Its fine, no need to change settings.
|
|
|
|
Bibi187
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 420
Merit: 106
https://steemit.com/@bibi187
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 29, 2017, 09:52:29 PM |
|
So far nvOC0019 seems working good, i notice something weird, i actually lost 4 mh/s on my 8 x 1070 Asus compared to nvOC0018 on skunk algo, i use same miner as u input inside i assume, ccminer2.2 by tpruvot.
|
|
|
|
damNmad
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 378
Merit: 104
nvOC forever
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 29, 2017, 10:14:52 PM |
|
So far nvOC0019 seems working good, i notice something weird, i actually lost 4 mh/s on my 8 x 1070 Asus compared to nvOC0018 on skunk algo, i use same miner as u input inside i assume, ccminer2.2 by tpruvot.
have you checked intensity??
|
|
|
|
Bibi187
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 420
Merit: 106
https://steemit.com/@bibi187
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 29, 2017, 10:21:52 PM |
|
So far nvOC0019 seems working good, i notice something weird, i actually lost 4 mh/s on my 8 x 1070 Asus compared to nvOC0018 on skunk algo, i use same miner as u input inside i assume, ccminer2.2 by tpruvot.
have you checked intensity?? Yeap i use -i 25 as usual i am between 29.5-30 before i was on 30-30.5
|
|
|
|
car1999
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 30, 2017, 12:50:05 AM |
|
I'm running 0019 on a 4 GPUs rig, looks great.
|
|
|
|
fullzero (OP)
Legendary
Offline
Activity: 1260
Merit: 1009
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 30, 2017, 03:13:06 AM |
|
THANK YOU GUYS!!! I successfully change it! I apologizing for my stupidity that's why so many questions ![Embarrassed](https://bitcointalk.org/Smileys/default/embarrassed.gif) Asking for something u dont know is never stupid ... If people laugh about it, they prolly dont know much thing Sorry was away seems u get helped! You are welcome, every question is a learning step, good luck ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) In US culture the idea that one should not admit to not knowing anything is prevalent. This is absolute nonsense. It is absolutely impossible for any human to know even 1% of the current extent of human knowledge.
|
|
|
|
fullzero (OP)
Legendary
Offline
Activity: 1260
Merit: 1009
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 30, 2017, 03:15:02 AM |
|
Hi fullzero, Not sure you have already fixed/added these things in v19, but would like get these things to your notice. * Would like to mine coins based on x11gost, is that possible with 18 Version or in v19? when I tried to mine SIB (x11Gost) using the below command it failed to mine, i guess I can't mine it with ccminer!? /home/m1/TPccminer/ccminer -a x11gost -o stratum+tcp://sib.suprnova.cc:3458 -u xxx.xxxx -p x -i 25 * When i tried to mine pascal(lite) or decred alone using the 1bash or below cmd /home/m1/pasc/sgminer -k pascal -o stratum+tcp://mine.pasl.fairpool.xyz:4009 -u xxxxx-xx..xxxxxxx -p x -p x -I 21 -w 64 -g2 failed with the following error [14:07:24] Started sgminer 5.5.0-nicehash [14:07:24] * using Jansson 2.7 [14:07:24] WARNING: GPU_MAX_ALLOC_PERCENT is not specified! [14:07:24] WARNING: GPU_USE_SYNC_OBJECTS is not specified!Killed * I think you are going to add cryptonight algo to mine coins like XMR with GPU in v19 right? I'm looking to mine the following coins KRB, BCN, XDN using cryptonight algo Hope they are already noticed and added in the upcoming release, if not would eagerly wait for the release with the above fixes ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Thanks You should be able to use stak for cryptonight algos, SIB I will need to try. I compiled the newest TP 2.2 for v0019 which I am not sure it needs to be compiled differently to support SIB; or if another client is better to use. Thanks for the prompt reply, really appreciate it; can you also please look into this when you got some free time, Thanks. * When i tried to mine pascal(lite) or decred alone using the 1bash or below cmd /home/m1/pasc/sgminer -k pascal -o stratum+tcp://mine.pasl.fairpool.xyz:4009 -u xxxxx-xx..xxxxxxx -p x -p x -I 21 -w 64 -g2 failed with the following error [14:07:24] Started sgminer 5.5.0-nicehash [14:07:24] * using Jansson 2.7 [14:07:24] WARNING: GPU_MAX_ALLOC_PERCENT is not specified! [14:07:24] WARNING: GPU_USE_SYNC_OBJECTS is not specified!Killed This sgminer is rather dated now. I will add trying a newer one and trying pascal lite with it. to the list.
|
|
|
|
fullzero (OP)
Legendary
Offline
Activity: 1260
Merit: 1009
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 30, 2017, 03:15:44 AM |
|
Is there any way to mine ubiq with this software? Add the following details to your 1bash : Update your own address, pool and worker : UBQ_WORKER="$IP_AS_WORKER" UBQ_ADDRESS="xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx" UBQ_POOL="stratum+tcp://eu.ubiqpool.io:8008" UBQ_EXTENTION_ARGUMENTS="" Add this in the right place in the bottom code if [ $COIN == "UBQ" ] then
if [ $CLAYMORE_VERSION == "9_7" ] then HCD='/home/m1/eth/9_7/ethdcrminer64' fi
if [ $CLAYMORE_VERSION == "9_5" ] then HCD='/home/m1/eth/9_5/ethdcrminer64' fi
if [ $CLAYMORE_VERSION == "9_4" ] then HCD='/home/m1/eth/9_4/ethdcrminer64' fi
if [ $CLAYMORE_VERSION == "8_0" ] then HCD='/home/m1/eth/8_0/ethdcrminer64' fi
UBQADDR="$UBQ_ADDRESS/$UBQ_WORKER"
screen -dmS miner $HCD -epool $UBQ_POOL -ewal $UBQADDR -epsw x -mode 1 -allpools 1 -dbg -1 $UBQ_EXTENTION_ARGUMENTS
if [ $LOCALorREMOTE == "LOCAL" ] then screen -r miner fi
BITCOIN="theGROUND"
while [ $BITCOIN == "theGROUND" ] do sleep 60 done fi Thanks for making adding this easy. ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
|
|
|
fullzero (OP)
Legendary
Offline
Activity: 1260
Merit: 1009
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 30, 2017, 03:18:49 AM |
|
papampi I added a link to the op for your swap guide yesterday; however the OP is a mess and there are too many links; I probably need to reorganize the OP.
Not noticing the swap from initial install in fstab was a major fail on my part; which makes this fix a huge improvement. I want to make sure members give osnwt the credit.
fullzero, I dont need any credits. All credits are to your awesome work. keep up the good work, I have been in love with Linux since ubuntu 8.0, and I'm just here to help anyway I can. It's not all me; its the community. I always try to properly acknowledge members contributions. I strongly dislike how there are mining OSes that are sold. I would like to do away with that entirely. Hopefully the community is with me on that. ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
|
fullzero (OP)
Legendary
Offline
Activity: 1260
Merit: 1009
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 30, 2017, 03:21:41 AM |
|
Try setting DNS nameservers, adding a line at the end I use static address and have it working with the nameservers. (8.8.8.8 is Google nameserver, "always" works). it work, thank you so much ! Good to know; I will try this myself with my mifi failover (which has had nameserver issues). Thanks V1d4r. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
|