[OS] nvOC easy-to-use Linux Nvidia Mining

[grunoff]

Another problem.
ZM didn`t start auto.
EWBF starts automatically, but ZM don`t.

Where could be an issue?

Thanks.

[grunoff]

I didn`t set the REMOTE option.
I tried but nothing workred, it says no such screen.

If I will set REMOTE option - will I still be able to connect through TeamViewer and look at miner screen direct?

Thanks.

try login via ssh  and
tail -f screenlog.0
[/quote]

tail: cannot open 'screenlog.0' for reading: No such file or directory
tail: no files remaining

[Temporel]

I have installed nv-OC 1.3.
Connected to it via putty.
I can`t find the miner screen via putty.

Can i somehow find it?

I`m new to Ubuntu.

you tried screen -r miner ?

You set the option to REMOTE in 1bash ?

If I will set REMOTE option - will I still be able to connect through TeamViewer and look at miner screen direct?

yes, using the other terminal.

[grunoff]

I have installed nv-OC 1.3.
Connected to it via putty.
I can`t find the miner screen via putty.

Can i somehow find it?

I`m new to Ubuntu.

you tried screen -r miner ?

You set the option to REMOTE in 1bash ?

If I will set REMOTE option - will I still be able to connect through TeamViewer and look at miner screen direct?

yes, using the other terminal.

Thanks.
Do you know why ZM miner do not start automatically?
EWBF starts ok, but ZM not.

Thank you in advance.

[Temporel]

I have installed nv-OC 1.3.
Connected to it via putty.
I can`t find the miner screen via putty.

Can i somehow find it?

I`m new to Ubuntu.

you tried screen -r miner ?

You set the option to REMOTE in 1bash ?

If I will set REMOTE option - will I still be able to connect through TeamViewer and look at miner screen direct?

yes, using the other terminal.

Thanks.
Do you know why ZM miner do not start automatically?
EWBF starts ok, but ZM not.

Thank you in advance.

Never had this problem but the only time I tested it was with v19.002 and I went back to V19 the same week because I had too much problems with other coins. ZM miner was fine though.

[fearherbs1]

Hey guys  is there any way to access the status web pages from outside the miner's network?

Also the papampi alert telegram type does not send me telegram messages. The BaliMiner one does though. Is there any way to fix this?

You should forward port 80 to your rig ip.
If you have many rigs you can forward different ports for each rig
for example in your router forward port 10180 to port 80 for 192.168.1.101
and forward port 10280 to port 80 for 192.168.1.102

Then open them by : http://YOUR_EXTERNAL_IP:10180/cgi-bin/minerinfo

For telegram
Please set it to papampi then execute a telegram by

Code:

bash telegram

see if it gives any errors

Thanks for the port forwarding info.

Unfortunately when I try to run telegram manual I get this error:

m1@m1-desktop:~$ sudo bash telegram
error: process ID list syntax error



This is on NVocv v0019-1.3

Then you get no message at all, or some info are empty ?
Also sudo not needed to send telegram message

Open and edit telegram file
In papampi section
Change MINER_UP_TIME to :

Code:

MINER_UP_TIME=$(ps -p `pgrep  miner` -o etime | grep -v ELAPSED)

I just changed that line in the telegram file. Now when I type

Code:

bash telegram

There is no error but there is no output to the console at all.

There should be no output in console,
You should just get your telegram message, if you set it right

Thanks for the fast reply, I double checked my settings in 1bash and everything seems good. I do not receive the alert though. I don't know if this has anything to do with it, but the webpage is missing some info: https://imgur.com/a/R5468

Oh, I remembered
There is an argument missing in 3main screen commands
Open 3main with gedit and replace all

Code:

screen -dmS 

with:

Code:

screen -dmSL 

After this change you can see miner, wdog and temp logs with this command too :

Code:

tail -f screenlog.0

Ok I replaced

Code:

screen -dmS 

with:

Code:

screen -dmSL 

and most of the info now shows up on the webpage as seen here: https://imgur.com/a/zLleL

The telegram alerts are still not working though. The weird thing is I checked guake after a
boot and this error was under the telegram terminal tab: https://imgur.com/a/49U3l
but when I run it manually I do not get the error but still do not receive the telegram message: https://imgur.com/a/lYwiw

[papampi]

Hey guys  is there any way to access the status web pages from outside the miner's network?

Also the papampi alert telegram type does not send me telegram messages. The BaliMiner one does though. Is there any way to fix this?

You should forward port 80 to your rig ip.
If you have many rigs you can forward different ports for each rig
for example in your router forward port 10180 to port 80 for 192.168.1.101
and forward port 10280 to port 80 for 192.168.1.102

Then open them by : http://YOUR_EXTERNAL_IP:10180/cgi-bin/minerinfo

For telegram
Please set it to papampi then execute a telegram by

Code:

bash telegram

see if it gives any errors

Thanks for the port forwarding info.

Unfortunately when I try to run telegram manual I get this error:

m1@m1-desktop:~$ sudo bash telegram
error: process ID list syntax error



This is on NVocv v0019-1.3

Then you get no message at all, or some info are empty ?
Also sudo not needed to send telegram message

Open and edit telegram file
In papampi section
Change MINER_UP_TIME to :

Code:

MINER_UP_TIME=$(ps -p `pgrep  miner` -o etime | grep -v ELAPSED)

I just changed that line in the telegram file. Now when I type

Code:

bash telegram

There is no error but there is no output to the console at all.

There should be no output in console,
You should just get your telegram message, if you set it right

Thanks for the fast reply, I double checked my settings in 1bash and everything seems good. I do not receive the alert though. I don't know if this has anything to do with it, but the webpage is missing some info:

Oh, I remembered
There is an argument missing in 3main screen commands
Open 3main with gedit and replace all

Code:

screen -dmS 

with:

Code:

screen -dmSL 

After this change you can see miner, wdog and temp logs with this command too :

Code:

tail -f screenlog.0

Ok I replaced

Code:

screen -dmS 

with:

Code:

screen -dmSL 

and most of the info now shows up on the webpage as seen here: https://imgur.com/a/zLleL

The telegram alerts are still not working though. The weird thing is I checked guake after a
boot and this error was under the telegram terminal tab: https://imgur.com/a/49U3l
but when I run it manually I do not get the error but still do not receive the telegram message: https://imgur.com/a/lYwiw

Did you edit this line in telegram

Code:

MINER_UP_TIME=$(ps -p `pgrep  miner` -o etime | grep -v ELAPSED)

[papampi]

I think you should set local or remote to remote in 1bash to get all the info for web and telegram.
I fixed all the bugs for telegram and web for 1.4 , waiting for fullzero to implement and release new version.

[fearherbs1]

Hey guys  is there any way to access the status web pages from outside the miner's network?

Also the papampi alert telegram type does not send me telegram messages. The BaliMiner one does though. Is there any way to fix this?

You should forward port 80 to your rig ip.
If you have many rigs you can forward different ports for each rig
for example in your router forward port 10180 to port 80 for 192.168.1.101
and forward port 10280 to port 80 for 192.168.1.102

Then open them by : http://YOUR_EXTERNAL_IP:10180/cgi-bin/minerinfo

For telegram
Please set it to papampi then execute a telegram by

Code:

bash telegram

see if it gives any errors

Thanks for the port forwarding info.

Unfortunately when I try to run telegram manual I get this error:

m1@m1-desktop:~$ sudo bash telegram
error: process ID list syntax error



This is on NVocv v0019-1.3

Then you get no message at all, or some info are empty ?
Also sudo not needed to send telegram message

Open and edit telegram file
In papampi section
Change MINER_UP_TIME to :

Code:

MINER_UP_TIME=$(ps -p `pgrep  miner` -o etime | grep -v ELAPSED)

I just changed that line in the telegram file. Now when I type

Code:

bash telegram

There is no error but there is no output to the console at all.

There should be no output in console,
You should just get your telegram message, if you set it right

Thanks for the fast reply, I double checked my settings in 1bash and everything seems good. I do not receive the alert though. I don't know if this has anything to do with it, but the webpage is missing some info: https://imgur.com/a/R5468

Oh, I remembered
There is an argument missing in 3main screen commands
Open 3main with gedit and replace all

Code:

screen -dmS 

with:

Code:

screen -dmSL 

After this change you can see miner, wdog and temp logs with this command too :

Code:

tail -f screenlog.0

Ok I replaced

Code:

screen -dmS 

with:

Code:

screen -dmSL 

and most of the info now shows up on the webpage as seen here: https://imgur.com/a/zLleL

The telegram alerts are still not working though. The weird thing is I checked guake after a
boot and this error was under the telegram terminal tab: https://imgur.com/a/49U3l
but when I run it manually I do not get the error but still do not receive the telegram message: https://imgur.com/a/lYwiw

Did you edit this line in telegram

Code:

MINER_UP_TIME=$(ps -p `pgrep  miner` -o etime | grep -v ELAPSED)

Yep. This is what that part of the telegram file looks like for me:

Code:

SYSTEM_BOOT_TIME=$(uptime -s)
SYSTEM_UP_TIME=$(uptime -p)
GPU_COUNT=$(nvidia-smi -L | tail -n 1| cut -c 5 |awk '{ SUM += $1+1}  ; { print SUM }')
REBOOT_REQUIRED=$([ -f /var/run/reboot-required ] && echo "Yes!!!" || echo "No")
MINER_UP_TIME=$(ps -p `pgrep  miner` -o etime | grep -v ELAPSED)
GPU_UTILIZATIONS=$(tail -n 5 5_restartlog | grep 'GPU UTILIZATION' | awk '{gsub(/GPU UTILIZATION:  /,"")}1' | tail -n 1)

Also I do have the remote/local setting configured to remote in my 1bash. (the rig is off site)

[papampi]

Are u on 19-1.3 ?

[papampi]

I will try to write and post a full fix for telegram and web tomorrow

[fearherbs1]

Are u on 19-1.3 ?

Yes.

I will try to write and post a full fix for telegram and web tomorrow

Thanks, I appreciate the help. 

[papampi]

Any one mining dual ETH
Please send me 10-20 lines of miner output to fix web info before post latest tomorrow

Also need Genoil ethminer output if any one mining with it.

[akokkon]

As you can see my papampi telegram does not work as it supposed!

What I have to do about that?
------------------------

Worker: nv074
Boot Time: 2017-10-19 21:05:30
System Up Time: up 2 hours, 51 minutes
Miner Uptime:    02:50:55
Currently Mining: "ZEC"
Reboot Required: No
GPU Count: 6
GPU Utilization:
100 100 100 100 100 99
Temp, Fan, Power:

[mikespax]

Is there a simple command to update xorg? I think this is the solution to my driver/temp control problems.

[leenoox]

Did you edit this line in telegram

Code:

MINER_UP_TIME=$(ps -p `pgrep  miner` -o etime | grep -v ELAPSED)

Yep. This is what that part of the telegram file looks like for me:

Code:

SYSTEM_BOOT_TIME=$(uptime -s)
SYSTEM_UP_TIME=$(uptime -p)
GPU_COUNT=$(nvidia-smi -L | tail -n 1| cut -c 5 |awk '{ SUM += $1+1}  ; { print SUM }')
REBOOT_REQUIRED=$([ -f /var/run/reboot-required ] && echo "Yes!!!" || echo "No")
MINER_UP_TIME=$(ps -p `pgrep  miner` -o etime | grep -v ELAPSED)
GPU_UTILIZATIONS=$(tail -n 5 5_restartlog | grep 'GPU UTILIZATION' | awk '{gsub(/GPU UTILIZATION:  /,"")}1' | tail -n 1)

Also I do have the remote/local setting configured to remote in my 1bash. (the rig is off site)

You are using wrong apostrophe. Try this:

Code:

MINER_UP_TIME=$(ps -p 'pgrep  miner' -o etime | grep -v ELAPSED)

[CryptAtomeTrader44]

Any one mining dual ETH
Please send me 10-20 lines of miner output to fix web info before post latest tomorrow

Also need Genoil ethminer output if any one mining with it.

Yes I am minning with claymore 10 on nvOC v0019. I am mining with MPH-Switch modified, and et this time i write this message my miner system is mining ZClassic ...

But i will send you in private the logs of claymore minning ETH + LBC ASAP.

[HyPyk]

Hi all,

looking for a motherboard to build 6GPU rig on nvOC, what's the best choice of Mobo+CPU based on price/quality/performance/nvOC19 compatability/etc, what would be your choice. Source is Amazon.com

Thanks for your opinion

you can PM me

[papampi]

Did you edit this line in telegram

Code:

MINER_UP_TIME=$(ps -p `pgrep  miner` -o etime | grep -v ELAPSED)

Yep. This is what that part of the telegram file looks like for me:

Code:

SYSTEM_BOOT_TIME=$(uptime -s)
SYSTEM_UP_TIME=$(uptime -p)
GPU_COUNT=$(nvidia-smi -L | tail -n 1| cut -c 5 |awk '{ SUM += $1+1}  ; { print SUM }')
REBOOT_REQUIRED=$([ -f /var/run/reboot-required ] && echo "Yes!!!" || echo "No")
MINER_UP_TIME=$(ps -p `pgrep  miner` -o etime | grep -v ELAPSED)
GPU_UTILIZATIONS=$(tail -n 5 5_restartlog | grep 'GPU UTILIZATION' | awk '{gsub(/GPU UTILIZATION:  /,"")}1' | tail -n 1)

Also I do have the remote/local setting configured to remote in my 1bash. (the rig is off site)

You are using wrong apostrophe. Try this:

Code:

MINER_UP_TIME=$(ps -p 'pgrep  miner' -o etime | grep -v ELAPSED)

No Leenoox,
Its. backticks below Tilde " `"  not apostrophe.
Text between backticks will be executed and replaced by the output of the command

[papampi]

Any one mining dual ETH
Please send me 10-20 lines of miner output to fix web info before post latest tomorrow

Also need Genoil ethminer output if any one mining with it.

Yes I am minning with claymore 10 on nvOC v0019. I am mining with MPH-Switch modified, and et this time i write this message my miner system is mining ZClassic ...

But i will send you in private the logs of claymore minning ETH + LBC ASAP.

Thanks Mate.