PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[Semtex72]

what is the best settings mining on RX 5700 ?

Thats to broad of a question.  Each 5700 is different and can handle more or less OC/UV.  So what brand and model do you have?

Question to you would be are these stock 5700 or 5700xt?

Have you flashed the xt bios onto a 5700 if it is base model?

Have you modded the bios (copied 1500 straps on down)?

None modded 5700 is usually good at 1175 core, 750 v, 1800 memory, 850 v

modded 5700xt is usually good at 1300 core, 775 v, 1800-1820memory, 850 v


That will give you a starting point, u can make adjustments based on if you card can handle those settings without crashing or a bunch of stale shares.

What Mobo are you using?

[1714777352]

1714777352

[1714777352]

1714777352

[1714777352]

1714777352

[MireNS]

I can't fix Inccorect ETH share from GPU and geting around 50% stales on my RX 5700(not XT) in Phoenixminer 4.9c. I got stability and GPU temp around 60 C but this is anoing rly
Here is my setup file:
-pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555
-wal
-worker test1
-tt 62
-cvddc 750
-cclock 13000
-fanmin 0
-mclock 910
-amd
-acm
-mi 12
-gt 126
-mode 1
-clKernel 1
-clNew 1
-clf 0
-lidag 1
-openclLocalWork 128
-openclGlobalMultiplier 4096
pause

Pls some1 help me or I will kill this GPU
My print scr: https://ibb.co/SxkmtYf

[UnclWish]

I can't fix Inccorect ETH share from GPU and geting around 50% stales on my RX 5700(not XT) in Phoenixminer 4.9c. I got stability and GPU temp around 60 C but this is anoing rly
Here is my setup file:
-pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555
-wal
-worker test1
-tt 62
-cvddc 750
-cclock 13000
-fanmin 0
-mclock 910
-amd
-acm
-mi 12
-gt 126
-mode 1
-clKernel 1
-clNew 1
-clf 0
-lidag 1
-openclLocalWork 128
-openclGlobalMultiplier 4096
pause

Pls some1 help me or I will kill this GPU
My print scr: https://ibb.co/SxkmtYf

What drivers? 20.4.1? Install 20.3.1

[MireNS]

20.3.1 for now,tested one befor and had same problem

[UnclWish]

20.3.1 for now,tested one befor and had same problem

Try to remove options
-openclLocalWork 128
-openclGlobalMultiplier 4096

[MireNS]

kk testing now will see. ty wm

[br2459]

20.3.1 for now,tested one befor and had same problem

Try to remove options
-openclLocalWork 128
-openclGlobalMultiplier 4096

I use -openclLocalWork 32 and don't get incorrect shares. I have been down this path and no matter what you do, you will always get incorrect shares with the value higher than 32.

[Binary100100]

20.3.1 for now,tested one befor and had same problem

Try to remove options
-openclLocalWork 128
-openclGlobalMultiplier 4096

I use -openclLocalWork 32 and don't get incorrect shares. I have been down this path and no matter what you do, you will always get incorrect shares with the value higher than 32.

I don't see any difference at all when using -openclLocalWork 32.

[bategojko74]

20.3.1 for now,tested one befor and had same problem

Try to remove options
-openclLocalWork 128
-openclGlobalMultiplier 4096

I use -openclLocalWork 32 and don't get incorrect shares. I have been down this path and no matter what you do, you will always get incorrect shares with the value higher than 32.

I don't see any difference at all when using -openclLocalWork 32.

For the older cards (RX470/480/570/580) the default openclLocalWork is 64 and you will get incorrect shares for higher than the default 64 value. For the NAVI cards like RX5700(XT) the default openclLocalWork is 32 and you will get incorrect shares for higher than the default 32 value.

[MireNS]

20.3.1 for now,tested one befor and had same problem

Try to remove options
-openclLocalWork 128
-openclGlobalMultiplier 4096

did like Uncl sad remove that 2 lines and dont get any errors and got stabil speed of 50Mhs at power of 114w for now,time to play now whit setings:)

[commandera]

i have error
i just added new gpu and reinstalled driver

gpu6: cEnqueueWriteBuffer (-4)

gpu7: cEnqueueWriteBuffer (-4)

threads not responding, restarting


what happen ?

[UnclWish]

i have error
i just added new gpu and reinstalled driver

gpu6: cEnqueueWriteBuffer (-4)

gpu7: cEnqueueWriteBuffer (-4)

threads not responding, restarting


what happen ?

Increase size of pagefile. Add to it's current size summary amount of videomemory size of new gpus.

[Dowper_]

We need miner update for newest drivers!

[Semtex72]

We need miner update for newest drivers!

Yes, hoping for it. I can only make 5x rx 5700 cards run properly for the moment.

[Binary100100]

I can't fix Inccorect ETH share from GPU and geting around 50% stales on my RX 5700(not XT) in Phoenixminer 4.9c. I got stability and GPU temp around 60 C but this is anoing rly
Here is my setup file:
-pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555
-wal
-worker test1
-tt 62
-cvddc 750
-cclock 13000
-fanmin 0
-mclock 910
-amd
-acm
-mi 12
-gt 126
-mode 1
-clKernel 1
-clNew 1
-clf 0
-lidag 1
-openclLocalWork 128
-openclGlobalMultiplier 4096
pause

Pls some1 help me or I will kill this GPU
My print scr: https://ibb.co/SxkmtYf

Ummm... confirm your -cclock again?
I'm no expert but 13000 seems a little high. Maybe 1300 would be better.

And as the other said, ditch -openclLocalWork 128 -openclGlobalMultiplier 4096

[UnclWish]

We need miner update for newest drivers!

Unfortunately, looks like project dropped. Author didn't appeared here from 22 january 2020.

[Nightworker88]

Hello, would need some help mining Quarkchain QKC

PhoenixMiner working well for me for a long time and this is not my problem.

i took from binance a QKC address, write in miner, mining on qkc.ontopool.com. all was working without issues for hours.

So now the problem: qkc address from binance - and never had issues when i took for testing one address from them - looks like "xyz" 


BUT ontopool "makes" from it "xyz000000" - all other mining adresses there also look like this! - so i have coins on "xyz00000" but cannot take them, ok its maybe 2$, so not worth


but what i make wrong?


THX

[zeezoo]

Hello, would need some help mining Quarkchain QKC

PhoenixMiner working well for me for a long time and this is not my problem.

i took from binance a QKC address, write in miner, mining on qkc.ontopool.com. all was working without issues for hours.

So now the problem: qkc address from binance - and never had issues when i took for testing one address from them - looks like "xyz" 


BUT ontopool "makes" from it "xyz000000" - all other mining adresses there also look like this! - so i have coins on "xyz00000" but cannot take them, ok its maybe 2$, so not worth


but what i make wrong?


THX

Don't mine QKC on Binance. They're not using QKC mainchain, hence you can't get access the coins you're mining until Binance changes the protocol. At least that's what they told me few months back. Now the coins I've mined are "in the air".

[sergioheadache]

i cant reach 34.1 mhs with PM ... well , with cm i have 34 and 34.1 on all my rx 580 series ... anyone has a solution for this ?

seriously 34
how are you doing that?
can you share the settings?

[Dowper_]

We need miner update for newest drivers!

Unfortunately, looks like project dropped. Author didn't appeared here from 22 january 2020.

This is not good...