PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[cscheat]

Hello PhoenixMiner

I am trying bench mode on ETC to test my RX580 4G, but RAM size seams still too low

My bat command :

Code:

PhoenixMiner.exe -bench 400 -coin ETC

Log shows :

Code:

2020.11.27:11:33:06.056: GPU2 GPU2: DAG size limited from 4223 MB to 4023 MB
2020.11.27:11:33:06.981: GPU2 GPU2: Free VRAM: 3.951 GB; used: 0.049 GB
2020.11.27:11:33:06.981: GPU2 GPU2: DAG size limited from 4223 MB to 4023 MB
2020.11.27:11:33:06.981: GPU2 GPU2: Disabling DAG pre-allocation (not enough VRAM)
2020.11.27:11:33:06.981: GPU2 GPU2: Allocating DAG for epoch #400 (3.93) GB
2020.11.27:11:33:07.002: GPU2 GPU2: Generating DAG for epoch #400

And I only get 1MH/s

Is my command wrong ?

Thanks

you should bench on the ETC test net

[1714728436]

1714728436

[1714728436]

1714728436

[laineux]

Ok, I tried :

Code:

PhoenixMiner.exe -bench 400 -coin ETC -pool mordor.pool.fault.dev:8008  -wal 0x008c26f3a2Ca8bdC11e5891e0278c9436B6F5d1E.Rig001 

But connexion to pool is rejected.

Nobody is using this pool now. I supposed, it is broken...

[batsonxl]

Hello PhoenixMiner

I am trying bench mode on ETC to test my RX580 4G, but RAM size seams still too low

My bat command :

Code:

PhoenixMiner.exe -bench 400 -coin ETC

Log shows :

Code:

2020.11.27:11:33:06.056: GPU2 GPU2: DAG size limited from 4223 MB to 4023 MB
2020.11.27:11:33:06.981: GPU2 GPU2: Free VRAM: 3.951 GB; used: 0.049 GB
2020.11.27:11:33:06.981: GPU2 GPU2: DAG size limited from 4223 MB to 4023 MB
2020.11.27:11:33:06.981: GPU2 GPU2: Disabling DAG pre-allocation (not enough VRAM)
2020.11.27:11:33:06.981: GPU2 GPU2: Allocating DAG for epoch #400 (3.93) GB
2020.11.27:11:33:07.002: GPU2 GPU2: Generating DAG for epoch #400

And I only get 1MH/s

Is my command wrong ?

Thanks

Dude 400epoch wrong after fork it will be 195

@Phoenix thanks for update. waiting for next update with srtraps for polaris cards.

[cscheat]

Hello PhoenixMiner

I am trying bench mode on ETC to test my RX580 4G, but RAM size seams still too low

My bat command :

Code:

PhoenixMiner.exe -bench 400 -coin ETC

Log shows :

Code:

2020.11.27:11:33:06.056: GPU2 GPU2: DAG size limited from 4223 MB to 4023 MB
2020.11.27:11:33:06.981: GPU2 GPU2: Free VRAM: 3.951 GB; used: 0.049 GB
2020.11.27:11:33:06.981: GPU2 GPU2: DAG size limited from 4223 MB to 4023 MB
2020.11.27:11:33:06.981: GPU2 GPU2: Disabling DAG pre-allocation (not enough VRAM)
2020.11.27:11:33:06.981: GPU2 GPU2: Allocating DAG for epoch #400 (3.93) GB
2020.11.27:11:33:07.002: GPU2 GPU2: Generating DAG for epoch #400

And I only get 1MH/s

Is my command wrong ?

Thanks

Dude 400epoch wrong after fork it will be 195

@Phoenix thanks for update. waiting for next update with srtraps for polaris cards.

STRAP coming niceeeee

[R30]

Does 5.2e is ready for ETC Thanos hardfork?

[alizali]

even with 5.3b no more ETH mining is available on 4GB card right now
yes?
am i right or something wrong with my rigs?
we have to wait for ETC update or is there any better way?

[Lukke]

even with 5.3b no more ETH mining is available on 4GB card right now
yes?
am i right or something wrong with my rigs?
we have to wait for ETC update or is there any better way?

I will be still possible for more than a month using Linux.

[batsonxl]

even with 5.3b no more ETH mining is available on 4GB card right now
yes?
am i right or something wrong with my rigs?
we have to wait for ETC update or is there any better way?

Just wait 1 more day then will be mining etc with 4g cards like old good days again, im again exited thanks etc. Finally someone figured out that big dag size not good. hope ASICs stay away and profit will be the same  

[alizali]

even with 5.3b no more ETH mining is available on 4GB card right now
yes?
am i right or something wrong with my rigs?
we have to wait for ETC update or is there any better way?

I will be still possible for more than a month using Linux.

i use hiveos
but got wrong hashrate (59M for each card 470) and a lot of invalid shares

[bit-sokol]

Every of my RX 580 8Gb drop in hashrate by ~3 Mh on epochs over ~380 on 5.1c.

[miner1987]

Hello,
My R570 4GB are working now under Phoenix but my R9 290 4GB not. Any advice ?
Thank you !!

[oklickmanworld]

Every of my RX 580 8Gb drop in hashrate by ~3 Mh on epochs over ~380 on 5.1c.

install the latest version.

[lgregori]

Hello,
My R570 4GB are working now under Phoenix but my R9 290 4GB not. Any advice ?
Thank you !!

4 GB cards can no longer mine ETH. Mine ETC. The coin is now mined with 3 GB cards

[PepsiCoin88]

Hi! Can I mine ETC on RX470 (4GB)?

[Complivit91]

Friends, help me, I'm new to mining.
 I want to buy AMD 5700 XT for ETH mining.
This is a good investment for mining: Phoenix Miner / 5700 XT ?

[FloppyPurpleGherkin]

Friends, help me, I'm new to mining.
 I want to buy AMD 5700 XT for ETH mining.
This is a good investment for mining: Phoenix Miner / 5700 XT ?

Good for 55-58 mh at 80-120w 

[Complivit91]

Friends, help me, I'm new to mining.
 I want to buy AMD 5700 XT for ETH mining.
This is a good investment for mining: Phoenix Miner / 5700 XT ?

Good for 55-58 mh at 80-120w 

Thanks 

[oklickmanworld]

Hi! Can I mine ETC on RX470 (4GB)?

Yes, on the new algorithm!

[lgregori]

Friends, help me, I'm new to mining.
 I want to buy AMD 5700 XT for ETH mining.
This is a good investment for mining: Phoenix Miner / 5700 XT ?

Yes, this is a very good card for ETH mining. But it will pay off faster - 5600 XT

[DemonDL]

Ok, I tried :

Code:

PhoenixMiner.exe -bench 400 -coin ETC -pool mordor.pool.fault.dev:8008  -wal 0x008c26f3a2Ca8bdC11e5891e0278c9436B6F5d1E.Rig001 

But connexion to pool is rejected.

Nobody is using this pool now. I supposed, it is broken...

Use this wal: PhoenixMiner.exe -pool mordor.pool.fault.dev:8008 -wal 0xda904bc07fd95e39661941b3f6daded1b8a38c71 -coin etc