ste0024
|
|
February 10, 2014, 04:48:28 PM |
|
|
|
|
|
izod
Newbie
Offline
Activity: 25
Merit: 0
|
|
February 10, 2014, 05:55:38 PM |
|
The ribbon cable on the right... Mine is colored.. It just looks like a IDE cable. Is that what it is?
|
|
|
|
ste0024
|
|
February 10, 2014, 06:13:46 PM |
|
this cable come from 4 modules avalon 110ghs Gen 1. i receive this with a new module buy from avalon. never used.
|
|
|
|
pepo
Member
Offline
Activity: 86
Merit: 10
|
|
February 10, 2014, 10:13:33 PM |
|
Hello , someone have the latestes avalon 230 gh/s firmwarr , i have 2 theyre both at 0.0 mhs and connected to the pools.
|
|
|
|
ionutrai
Newbie
Offline
Activity: 21
Merit: 0
|
|
February 17, 2014, 02:39:06 PM |
|
I have to units with Avalon modules that I am connecting to two Raspberry Pi. I've made the exact same configurations of the two Raspberry Pi but on one of them I get the error below when I am trying to run cgminer like this: cgminer --config /root/cgminer/cgminer/cgminer.conf --lowmem --avalon-options 115200:16:10:12:1400:55 --avalon-cutoff 60 --avalon-autohttp://i.stack.imgur.com/ue3Ze.png
|
|
|
|
|
dogie
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
|
February 22, 2014, 01:34:47 AM |
|
Hello all. Avalon2 setup guide will be up soon.
Is there any demand for an Avalon1 setup? I guess a lot of units (including mine) will be moving to new owners to retire now that difficulty is 2049105903billion.
|
|
|
|
ManeBjorn
Legendary
Offline
Activity: 1288
Merit: 1004
|
|
February 22, 2014, 02:00:00 AM |
|
Hard to say. I have a 74 gh/s Aalon1 that runs great. I would love to get another one just to mine altcoins. My problem is my money is limited. Which one do you have? Hello all. Avalon2 setup guide will be up soon.
Is there any demand for an Avalon1 setup? I guess a lot of units (including mine) will be moving to new owners to retire now that difficulty is 2049105903billion.
|
|
|
|
gjpminingco
|
|
February 22, 2014, 07:23:41 PM |
|
Hey is there any way to make an AVALON Mini respond to the Config page over Wifi connection??? I have it in another room and it is connected over wifi but it will only allow me to config it if i am connedted via lan, and Since this is being moved to another location in a few days i want to be able to remote access to this device ( API ) once it is in the new location ( all the way across town )
|
|
|
|
ManeBjorn
Legendary
Offline
Activity: 1288
Merit: 1004
|
|
February 22, 2014, 07:32:55 PM |
|
It might be that it has a new IP Address. Go into your router and check the clients list and once you find it type that into your browser to get to the login screen. That should allow you back in with no issues. I hope that helps you. Hey is there any way to make an AVALON Mini respond to the Config page over Wifi connection??? I have it in another room and it is connected over wifi but it will only allow me to config it if i am connedted via lan, and Since this is being moved to another location in a few days i want to be able to remote access to this device ( API ) once it is in the new location ( all the way across town )
|
|
|
|
gjpminingco
|
|
February 22, 2014, 07:49:44 PM |
|
nope i have tried that, it seems like the page can only be accessed on the IP that is assigned to the lan connection.
No matter what i have done i cant get it to work right
|
|
|
|
ManeBjorn
Legendary
Offline
Activity: 1288
Merit: 1004
|
|
February 22, 2014, 09:21:02 PM |
|
That is weird. You might have to use the hardware reset button if it has one inside like some do. That will get you back to default and you can go in. If the IP address is showing in the router though you should still be able to get to it unless there is a firewall block on your computers end though. I wish I could help more. nope i have tried that, it seems like the page can only be accessed on the IP that is assigned to the lan connection.
No matter what i have done i cant get it to work right
|
|
|
|
gjpminingco
|
|
February 22, 2014, 09:52:30 PM |
|
ok if anyone has the know how to config a Avalon Mini ( 60ghs model ) to connect to wifi and start mining and allow the access to the config page via the wifi connection and if someone can help me do this i have like 0.0008 btc i can send ya for the help since i am very tight on funds after buying this thing
|
|
|
|
ste0024
|
|
February 24, 2014, 12:41:07 AM |
|
ok if anyone has the know how to config a Avalon Mini ( 60ghs model ) to connect to wifi and start mining and allow the access to the config page via the wifi connection and if someone can help me do this i have like 0.0008 btc i can send ya for the help since i am very tight on funds after buying this thing
easy i use all my 4 mini in wifi and i can check in wifi. i can do with teamweiver
|
|
|
|
gjpminingco
|
|
February 24, 2014, 03:16:12 AM |
|
hey all I got it setup
I had to disable the Lan connectionand once i did that it started accepting connections via the wifi
Thanks for all the PMs and Help everyone
|
|
|
|
ManeBjorn
Legendary
Offline
Activity: 1288
Merit: 1004
|
|
February 24, 2014, 03:21:12 AM |
|
Very cool. I had never done that on my Avalon they are both still on now. LOL I might turn it off too. hey all I got it setup
I had to disable the Lan connectionand once i did that it started accepting connections via the wifi
Thanks for all the PMs and Help everyone
|
|
|
|
smoothrunnings
|
|
February 24, 2014, 06:36:38 PM |
|
Avalon issues. My B1 is having issues, I suspect the PSU is on it's last legs. This morning I noticed my light stopped blinking on my Avalon, when I checked my P2Pool the hashrate was very low, but higher more than my 60 + 12GH running. So I powered it down for a couple of minutes then powered it up and it started hashing normally again. I just checked now remotely and notice my P2Pool shows I am doing 160GH/s out of the 180+, I checked the Avalon and noticed that all cards are working but the error rate is at 2.4 (yikes), I did a soft reboot. I suspect my AX860i is going because when the power goes off and on (I rarely have power brown outs or power loss but when I do I notice this) the PSU doesn't come back on properly and the Avy show's a red light forcing me to power it off and waiting a few seconds then powering it back on. Does this sound right?
|
|
|
|
gjpminingco
|
|
February 27, 2014, 01:54:49 AM |
|
Hey I would thought i would let everyone know that i am working on a update for the Avalon Mini's to allow you to update to cgminer 4.0.0 from 3.9.0
I will keep you all up to date on my progress
|
|
|
|
gjpminingco
|
|
February 27, 2014, 06:20:23 AM |
|
WOOOOOT
it works and I am getting better speed also
|
|
|
|
ManeBjorn
Legendary
Offline
Activity: 1288
Merit: 1004
|
|
February 27, 2014, 06:23:28 AM |
|
Nice! I wonder if they will ever put out an update like that for my Gen 1 Avalon 70 gh/s unit? Good luck and keep us up to date on your progress. WOOOOOT
it works and I am getting better speed also
|
|
|
|
|