Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Claymore]

- fixed issue with rejected shares when "-esm 3" option is used.

Doesn't seem like it's going well... Got a report from one of our users, DevFee mining is working now, but he's getting rejected shares right after DevFee.
But this occurs much less often.

You are correct. The reason is that you send same jobid and jobheader for both main and devfee connections, the only difference is extranonce and I don't handle this case properly.
I will upload an update within a couple of hours.

[1714899608]

1714899608

[1714899608]

1714899608

[1714899608]

1714899608

[Claymore]

I re-uploaded v11.7 with these changes:

- fixed issue with "-esm 3" (again).
- fixed issue with Nvidia fan control (Windows only)

Please re-download v11.7 if you have any of these issues, it must write "b583" to the log at the beginning.

[haliy-2017]

start.bat---6*1060 gaming X 6gb  11.7???(Nvidia cards in Windows: "-tt", "-powlim", "-cclock", "-mclock", "-tt", "-fanmax", "-fanmin" )

[Balthazar]

You are correct. The reason is that you send same jobid and jobheader for both main and devfee connections, the only difference is extranonce

Yes, you are right. Job is global and the same for every miner who works on it within its own nonce space. This guarantees unique mining results for every session. The only event when job id changes is getting new block from the network. Another thing is that server remembers the content of last 6 job packages and corresponding results are accepted as well, though with lower reward.

[big_daddy]

DO NOT USE MEW (MYETHERWALLET ONLINE)

https://www.reddit.com/r/MyEtherWallet/comments/8ek0jj/think_i_got_scammedphishedhacked/

GOOGLE DNS IS HACKED!

[Sam123]

DO NOT USE MEW (MYETHERWALLET ONLINE)

https://www.reddit.com/r/MyEtherWallet/comments/8ek0jj/think_i_got_scammedphishedhacked/

GOOGLE DNS IS HACKED!

Thanks for the update and letting everybody know. Did they steal a lot of ethereum coin? When the hack start?
I'm going to read the article on Reddit now.

[cabri]

 if the rig is MIXED, miner does not extend available memory of 1060 3GB version on Windows10 (2xAMD and 2x1060 3GB). Then it gives an dag size error. However, if the rig is full of 1060 3GB version,there is no problem. Can you fix this?
https://imgur.com/uifs4om
https://imgur.com/h8kYUb7

[Serpent6877]

I re-uploaded v11.7 with these changes:

- fixed issue with "-esm 3" (again).
- fixed issue with Nvidia fan control (Windows only)

Please re-download v11.7 if you have any of these issues, it must write "b583" to the log at the beginning.

Windows defender is decting a Trojan in this release:

Threat ID 2147723652
  Threat Name Trojan:Win32/Fuerboos.A!cl
  Severity ID 5
  Severity Name Severe
  Category ID 8
  Category Name Trojan
  FWLink https://go.microsoft.com/fwlink/?linkid=37020&name=Trojan:Win32/Fuerboos.A!cl&threatid=2147723652&enterprise=0

[jeremyismer]

I re-uploaded v11.7 with these changes:

- fixed issue with "-esm 3" (again).
- fixed issue with Nvidia fan control (Windows only)

Please re-download v11.7 if you have any of these issues, it must write "b583" to the log at the beginning.

Windows defender is decting a Trojan in this release:

Threat ID 2147723652
  Threat Name Trojan:Win32/Fuerboos.A!cl
  Severity ID 5
  Severity Name Severe
  Category ID 8
  Category Name Trojan
  FWLink https://go.microsoft.com/fwlink/?linkid=37020&name=Trojan:Win32/Fuerboos.A!cl&threatid=2147723652&enterprise=0

Did you read the first post? It is often flagged falsely as a trojan/virus.

[heavyarms1912]

DO NOT USE MEW (MYETHERWALLET ONLINE)

https://www.reddit.com/r/MyEtherWallet/comments/8ek0jj/think_i_got_scammedphishedhacked/

GOOGLE DNS IS HACKED!

Thanks for the update and letting everybody know. Did they steal a lot of ethereum coin? When the hack start?
I'm going to read the article on Reddit now.

Yup it seems like quite a lot of coins were transferred to rogue account.  
However this was not MEW being hacked but a DNS attack.  Also, there should've been a SSL/TLS certificate mismatch shown by the browser.  If the user still went and logged in that user's wallet might be compromised.

[iRrromka]

@Claymore, do you know about stability problems at mining configs with more than 12 AMD GPUs? I have one based on Astock pro btc+ and 13 sapphire rx 580 nitro+. It can mine for hours without any problems, and after it can restart/freeze/report OpenCL errors (can’t create dag file at startup, hangs up and so on).

I saw, that AMD writes about problems in their AMD Adrenalin 18.3.4, but wtf??? What do you think?

[WhackOBill]

DO NOT USE MEW (MYETHERWALLET ONLINE)

https://www.reddit.com/r/MyEtherWallet/comments/8ek0jj/think_i_got_scammedphishedhacked/

GOOGLE DNS IS HACKED!

Thanks for the update and letting everybody know. Did they steal a lot of ethereum coin? When the hack start?
I'm going to read the article on Reddit now.

Yup it seems like quite a lot of coins were transferred to rogue account.  
However this was not MEW being hacked but a DNS attack.  Also, there should've been a SSL/TLS certificate mismatch shown by the browser.  If the user still went and logged in that user's wallet might be compromised.

I think from reports, it was the MEW DNS servers that were hacked and they, of course, report their addresses out to the public DNS servers since they are authoritative for the MEW domain.  So many people use Google DNS that they just placed the blame there as that's the system they see giving them the bad address.  But it was the MEW DNS servers pushing the bad address up to the public DNS system.

[dave4925]

@Claymore

Works like a charm - as always.
Still having issues with my AMD cards lowering hashrate for a few seconds (up to two mins) and then back to normal. Have learned to live with it, but I wonder why...

Ollis

check the clock speeds and temperature while it does this and after the speeds return to normal.  My guess is they get too hot, and gpu and memory clocks throttle down to lower speeds until it cools down to normal temperatures.  Then it will go back up.

[ne0x86]

Hi, Im getting this error since day 19, I tried a lot of possibles solutions but I cant fix it. Also Im trying to fix it with devs of simplemining and they cant fix it neither. Could be a claymore bug?

OFC I tried to reinstall simplemining, low OC/UV etc without luck

Thanks!

https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2Foai9ALG.jpg&t=588&c=6D4Xqcvf_lRV4A

[ollis miner]

@Claymore

Works like a charm - as always.
Still having issues with my AMD cards lowering hashrate for a few seconds (up to two mins) and then back to normal. Have learned to live with it, but I wonder why...

Ollis

check the clock speeds and temperature while it does this and after the speeds return to normal.  My guess is they get too hot, and gpu and memory clocks throttle down to lower speeds until it cools down to normal temperatures.  Then it will go back up.

Thanks, dave4925

I will chech the clock speeds later, but I'm sure they are not too hot.
The rigs are placed in a cold area with good venting. -tt is 60 and they are always between 58 and 63.

Ollis

[erkange]

any example bat file for Nvidia 1070-1080?

[Espacee]

Hello Claymore.


I've installed Windows 7 for use 1060 3GB to mine ETH.

I've test and found a problem with Proxy mining.

For more effective mining and less stale share i'm using Ethproxy (https://github.com/Atrides/eth-proxy/releases)

Problem is : Normally i can mine Musicoin by pool, bu Claymore still not working with local proxy.


Proxy : Eth-proxy
Pool : music.2miners.com or others
Claymore : Version 11.7
Coin : Music
Error : DAG error (like ETH mining)
GPU : Zotac 1060  3GB
Rig OS : Windows 7 SP1 X64


Thank you
Best Regards.

[rufo28]

Dear Claymore,
thanks for the updated version, but i have error for NVML cannot detect temperature as well as CUDA error.

If it worked before try lower clocks to see if that is the reason.

@Claymore : do you mean under clocking my GPU's?

[bobster316]

The program crashes every time i run it. See below log file.

My system is my home pc, windows 7 64bit, 16gb RAM, GTX1070 6Gb


13:20:39:342   23d8   Check and remove old log files...
13:20:39:342   23d8   args: -epool eth-eu1.nanopool.org:9999 -ewal 0x9276eebafe0ec188e06137364d68da756700e8af.HomePC/rav.khangurra@gmail.com -epsw x
13:20:39:342   23d8   
13:20:39:343   23d8   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
13:20:39:343   23d8   º                Claymore's Dual GPU Miner - v11.7               º
13:20:39:343   23d8   º              ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK             º
13:20:39:343   23d8   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
13:20:39:343   23d8   
13:20:39:344   23d8   b583
13:20:39:544   23d8   ETH: 1 pool is specified
13:20:39:544   23d8   Main Ethereum pool is eth-eu1.nanopool.org:9999
13:20:39:544   23d8   DCR: 0 pool is specified
13:20:39:560   23d8   OpenCL platform: NVIDIA CUDA
13:20:39:560   23d8   AMD OpenCL platform not found
13:20:39:579   23d8   CUDA initializing...

13:20:39:579   23d8   NVIDIA Cards available: 1
13:20:39:579   23d8   CUDA Driver Version/Runtime Version: 8.0/8.0
13:20:39:580   23d8   GPU #0: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1  (pci bus 1:0:0)
13:20:39:580   23d8   Total cards: 1
13:20:43:582   23d8   NVML version: 8.373.06
13:20:44:097   23d8   SSL: Imported 65 certificates from local storage
13:20:44:126   20cc   ETH: Stratum - connecting to 'eth-eu1.nanopool.org' <213.32.29.168> port 9999 (unsecure)
13:20:44:159   20cc   sent: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["0x9276eebafe0ec188e06137364d68da756700e8af.HomePC/rav.khangurra@gmail.com", "x"], "id": 2, "method": "eth_submitLogin"}

13:20:44:159   20cc   ETH: Stratum - Connected (eth-eu1.nanopool.org:9999) (unsecure)
13:20:44:197   23d8   No pool specified for Decred! Ethereum-only mining mode is enabled

13:20:44:197   23d8   ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)

13:20:44:197   23d8   ETH: eth-proxy stratum mode
13:20:44:197   23d8   Watchdog enabled
13:20:44:197   23d8   Remote management (READ-ONLY MODE) is enabled on port 3333
13:20:44:197   23d8   

13:20:44:220   20cc   buf: {"jsonrpc":"2.0","id":2,"result":true}
{"jsonrpc":"2.0","id":0,"result":["0x2ccc78f177aaca43292c7a9acc6c6be8f51dd1149fd56cf59f727ee1de708669","0x3ffd591ffcc97fb5e4150c521510e446bb11563ff632ea15845332648cabc086","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}

13:20:44:220   20cc   ETH: Authorized
13:20:44:220   20cc   sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

13:20:44:220   20cc   remove first packet 243
13:20:44:260   20cc   buf: {"jsonrpc":"2.0","id":0,"result":["0x2ccc78f177aaca43292c7a9acc6c6be8f51dd1149fd56cf59f727ee1de708669","0x3ffd591ffcc97fb5e4150c521510e446bb11563ff632ea15845332648cabc086","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}

13:20:44:273   1728   Setting DAG epoch #183...

[LucianoBM]

One of my rigs has 2 AMD RX 470 and 1 GTX 1070.
So I always put -powlim, -cclock, -mclock, -tt, -fanmin and -fanmax only for the first 2 cards because it was not supported for NVIDIA and MSI Afterburner opened to control NVIDIA clocks and fan.

Now I am trying to stop using MSI Afterburner and use only Claymore commandline.
But on MSI Afterburner,

while on AMD I set Power Limit +15, Core Clock 1250, Memory Clock 2080,

on NVIDIA I set Power Limit 102, Core Clock +85 and Memory Clock +700 (for example).

How could I 'translate' that into Claymore commandline? Since MSI Afterburner shows 1898 MHz for coreclock and 4498 MHz for memory clock on NVIDIA so I assume that I have to use -cclock 1898 -mclock 4498 ?

Is it correct?

Thank you!