Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
April 24, 2018, 11:37:08 AM |
|
I re-uploaded v11.7 with these changes:
- fixed issue with "-esm 3" (again). - fixed issue with Nvidia fan control (Windows only)
Please re-download v11.7 if you have any of these issues, it must write "b583" to the log at the beginning.
|
|
|
|
haliy-2017
Newbie
Offline
Activity: 74
Merit: 0
|
|
April 24, 2018, 12:35:56 PM |
|
start.bat---6*1060 gaming X 6gb 11.7???(Nvidia cards in Windows: "-tt", "-powlim", "-cclock", "-mclock", "-tt", "-fanmax", "-fanmin" )
|
|
|
|
Balthazar
Legendary
Offline
Activity: 3108
Merit: 1359
|
|
April 24, 2018, 03:38:26 PM |
|
You are correct. The reason is that you send same jobid and jobheader for both main and devfee connections, the only difference is extranonce
Yes, you are right. Job is global and the same for every miner who works on it within its own nonce space. This guarantees unique mining results for every session. The only event when job id changes is getting new block from the network. Another thing is that server remembers the content of last 6 job packages and corresponding results are accepted as well, though with lower reward.
|
|
|
|
big_daddy
|
|
April 24, 2018, 03:59:14 PM |
|
|
If you don't believe it or don't get it, I don't have the time to try to convince you, sorry.
|
|
|
Sam123
|
|
April 24, 2018, 05:23:39 PM |
|
Thanks for the update and letting everybody know. Did they steal a lot of ethereum coin? When the hack start? I'm going to read the article on Reddit now.
|
|
|
|
cabri
Newbie
Offline
Activity: 11
Merit: 0
|
|
April 24, 2018, 06:45:13 PM |
|
if the rig is MIXED, miner does not extend available memory of 1060 3GB version on Windows10 (2xAMD and 2x1060 3GB). Then it gives an dag size error. However, if the rig is full of 1060 3GB version,there is no problem. Can you fix this? https://imgur.com/uifs4omhttps://imgur.com/h8kYUb7
|
|
|
|
Serpent6877
Newbie
Offline
Activity: 1
Merit: 0
|
|
April 24, 2018, 07:33:12 PM |
|
I re-uploaded v11.7 with these changes:
- fixed issue with "-esm 3" (again). - fixed issue with Nvidia fan control (Windows only)
Please re-download v11.7 if you have any of these issues, it must write "b583" to the log at the beginning.
Windows defender is decting a Trojan in this release: Threat ID 2147723652 Threat Name Trojan:Win32/Fuerboos.A!cl Severity ID 5 Severity Name Severe Category ID 8 Category Name Trojan FWLink https://go.microsoft.com/fwlink/?linkid=37020&name=Trojan:Win32/Fuerboos.A!cl&threatid=2147723652&enterprise=0
|
|
|
|
jeremyismer
Newbie
Offline
Activity: 55
Merit: 0
|
|
April 24, 2018, 07:40:12 PM |
|
I re-uploaded v11.7 with these changes:
- fixed issue with "-esm 3" (again). - fixed issue with Nvidia fan control (Windows only)
Please re-download v11.7 if you have any of these issues, it must write "b583" to the log at the beginning.
Windows defender is decting a Trojan in this release: Threat ID 2147723652 Threat Name Trojan:Win32/Fuerboos.A!cl Severity ID 5 Severity Name Severe Category ID 8 Category Name Trojan FWLink https://go.microsoft.com/fwlink/?linkid=37020&name=Trojan:Win32/Fuerboos.A!cl&threatid=2147723652&enterprise=0 Did you read the first post? It is often flagged falsely as a trojan/virus.
|
|
|
|
heavyarms1912
|
|
April 24, 2018, 08:04:46 PM |
|
Thanks for the update and letting everybody know. Did they steal a lot of ethereum coin? When the hack start? I'm going to read the article on Reddit now. Yup it seems like quite a lot of coins were transferred to rogue account. However this was not MEW being hacked but a DNS attack. Also, there should've been a SSL/TLS certificate mismatch shown by the browser. If the user still went and logged in that user's wallet might be compromised.
|
|
|
|
iRrromka
Newbie
Offline
Activity: 37
Merit: 0
|
|
April 24, 2018, 08:11:11 PM |
|
@Claymore, do you know about stability problems at mining configs with more than 12 AMD GPUs? I have one based on Astock pro btc+ and 13 sapphire rx 580 nitro+. It can mine for hours without any problems, and after it can restart/freeze/report OpenCL errors (can’t create dag file at startup, hangs up and so on).
I saw, that AMD writes about problems in their AMD Adrenalin 18.3.4, but wtf??? What do you think?
|
|
|
|
WhackOBill
Jr. Member
Offline
Activity: 73
Merit: 3
|
|
April 24, 2018, 11:54:07 PM |
|
Thanks for the update and letting everybody know. Did they steal a lot of ethereum coin? When the hack start? I'm going to read the article on Reddit now. Yup it seems like quite a lot of coins were transferred to rogue account. However this was not MEW being hacked but a DNS attack. Also, there should've been a SSL/TLS certificate mismatch shown by the browser. If the user still went and logged in that user's wallet might be compromised. I think from reports, it was the MEW DNS servers that were hacked and they, of course, report their addresses out to the public DNS servers since they are authoritative for the MEW domain. So many people use Google DNS that they just placed the blame there as that's the system they see giving them the bad address. But it was the MEW DNS servers pushing the bad address up to the public DNS system.
|
|
|
|
dave4925
Member
Offline
Activity: 134
Merit: 11
|
|
April 25, 2018, 04:06:09 AM |
|
@Claymore
Works like a charm - as always. Still having issues with my AMD cards lowering hashrate for a few seconds (up to two mins) and then back to normal. Have learned to live with it, but I wonder why...
Ollis
check the clock speeds and temperature while it does this and after the speeds return to normal. My guess is they get too hot, and gpu and memory clocks throttle down to lower speeds until it cools down to normal temperatures. Then it will go back up.
|
1BTcdaveJEX8SrLb62YSLY7r3W9P8XQYBN
|
|
|
|
ollis miner
Newbie
Offline
Activity: 30
Merit: 0
|
|
April 25, 2018, 07:05:48 AM |
|
@Claymore
Works like a charm - as always. Still having issues with my AMD cards lowering hashrate for a few seconds (up to two mins) and then back to normal. Have learned to live with it, but I wonder why...
Ollis
check the clock speeds and temperature while it does this and after the speeds return to normal. My guess is they get too hot, and gpu and memory clocks throttle down to lower speeds until it cools down to normal temperatures. Then it will go back up. Thanks, dave4925 I will chech the clock speeds later, but I'm sure they are not too hot. The rigs are placed in a cold area with good venting. -tt is 60 and they are always between 58 and 63. Ollis
|
|
|
|
erkange
Jr. Member
Offline
Activity: 76
Merit: 2
|
|
April 25, 2018, 08:47:59 AM |
|
any example bat file for Nvidia 1070-1080?
|
|
|
|
Espacee
Newbie
Offline
Activity: 23
Merit: 0
|
|
April 25, 2018, 12:05:42 PM |
|
Hello Claymore. I've installed Windows 7 for use 1060 3GB to mine ETH. I've test and found a problem with Proxy mining. For more effective mining and less stale share i'm using Ethproxy ( https://github.com/Atrides/eth-proxy/releases) Problem is : Normally i can mine Musicoin by pool, bu Claymore still not working with local proxy. Proxy : Eth-proxy Pool : music.2miners.com or others Claymore : Version 11.7 Coin : Music Error : DAG error (like ETH mining) GPU : Zotac 1060 3GB Rig OS : Windows 7 SP1 X64 Thank you Best Regards.
|
|
|
|
rufo28
Newbie
Offline
Activity: 15
Merit: 0
|
|
April 25, 2018, 12:26:03 PM |
|
Dear Claymore, thanks for the updated version, but i have error for NVML cannot detect temperature as well as CUDA error.
If it worked before try lower clocks to see if that is the reason. @Claymore : do you mean under clocking my GPU's?
|
|
|
|
bobster316
Newbie
Offline
Activity: 8
Merit: 0
|
|
April 25, 2018, 12:39:38 PM |
|
The program crashes every time i run it. See below log file.
My system is my home pc, windows 7 64bit, 16gb RAM, GTX1070 6Gb
13:20:39:342 23d8 Check and remove old log files... 13:20:39:342 23d8 args: -epool eth-eu1.nanopool.org:9999 -ewal 0x9276eebafe0ec188e06137364d68da756700e8af.HomePC/rav.khangurra@gmail.com -epsw x 13:20:39:342 23d8 13:20:39:343 23d8 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» 13:20:39:343 23d8 º Claymore's Dual GPU Miner - v11.7 º 13:20:39:343 23d8 º ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK º 13:20:39:343 23d8 ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ 13:20:39:343 23d8 13:20:39:344 23d8 b583 13:20:39:544 23d8 ETH: 1 pool is specified 13:20:39:544 23d8 Main Ethereum pool is eth-eu1.nanopool.org:9999 13:20:39:544 23d8 DCR: 0 pool is specified 13:20:39:560 23d8 OpenCL platform: NVIDIA CUDA 13:20:39:560 23d8 AMD OpenCL platform not found 13:20:39:579 23d8 CUDA initializing...
13:20:39:579 23d8 NVIDIA Cards available: 1 13:20:39:579 23d8 CUDA Driver Version/Runtime Version: 8.0/8.0 13:20:39:580 23d8 GPU #0: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1 (pci bus 1:0:0) 13:20:39:580 23d8 Total cards: 1 13:20:43:582 23d8 NVML version: 8.373.06 13:20:44:097 23d8 SSL: Imported 65 certificates from local storage 13:20:44:126 20cc ETH: Stratum - connecting to 'eth-eu1.nanopool.org' <213.32.29.168> port 9999 (unsecure) 13:20:44:159 20cc sent: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["0x9276eebafe0ec188e06137364d68da756700e8af.HomePC/rav.khangurra@gmail.com", "x"], "id": 2, "method": "eth_submitLogin"}
13:20:44:159 20cc ETH: Stratum - Connected (eth-eu1.nanopool.org:9999) (unsecure) 13:20:44:197 23d8 No pool specified for Decred! Ethereum-only mining mode is enabled
13:20:44:197 23d8 ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
13:20:44:197 23d8 ETH: eth-proxy stratum mode 13:20:44:197 23d8 Watchdog enabled 13:20:44:197 23d8 Remote management (READ-ONLY MODE) is enabled on port 3333 13:20:44:197 23d8
13:20:44:220 20cc buf: {"jsonrpc":"2.0","id":2,"result":true} {"jsonrpc":"2.0","id":0,"result":["0x2ccc78f177aaca43292c7a9acc6c6be8f51dd1149fd56cf59f727ee1de708669","0x3ffd591ffcc97fb5e4150c521510e446bb11563ff632ea15845332648cabc086","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}
13:20:44:220 20cc ETH: Authorized 13:20:44:220 20cc sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
13:20:44:220 20cc remove first packet 243 13:20:44:260 20cc buf: {"jsonrpc":"2.0","id":0,"result":["0x2ccc78f177aaca43292c7a9acc6c6be8f51dd1149fd56cf59f727ee1de708669","0x3ffd591ffcc97fb5e4150c521510e446bb11563ff632ea15845332648cabc086","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}
13:20:44:273 1728 Setting DAG epoch #183...
|
|
|
|
LucianoBM
Newbie
Offline
Activity: 15
Merit: 0
|
|
April 25, 2018, 02:22:27 PM |
|
One of my rigs has 2 AMD RX 470 and 1 GTX 1070. So I always put -powlim, -cclock, -mclock, -tt, -fanmin and -fanmax only for the first 2 cards because it was not supported for NVIDIA and MSI Afterburner opened to control NVIDIA clocks and fan.
Now I am trying to stop using MSI Afterburner and use only Claymore commandline. But on MSI Afterburner,
while on AMD I set Power Limit +15, Core Clock 1250, Memory Clock 2080,
on NVIDIA I set Power Limit 102, Core Clock +85 and Memory Clock +700 (for example).
How could I 'translate' that into Claymore commandline? Since MSI Afterburner shows 1898 MHz for coreclock and 4498 MHz for memory clock on NVIDIA so I assume that I have to use -cclock 1898 -mclock 4498 ?
Is it correct?
Thank you!
|
|
|
|
xtom1050
Newbie
Offline
Activity: 11
Merit: 0
|
|
April 25, 2018, 02:50:47 PM |
|
Today I stopped Claymore and restarted, it said not enough memory but will try - and succeeded 3Gb 1060s mining ETH on ethermine.org I hope it will work for others, too. WIN10 64 bit Claymore 11.6 Driver 388.13 same here .. it was inevitable .. 3gb zotacs were near end of dag file size Switch to windows 7 or linux, you'll be good for another while.
|
|
|
|
|