[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[webxass.de]

ahhhhh i understand ... mostly u find these params in context of windows ... so probably setting them on linux is really useless.

Not the case - read what I said more closely: If you're on Linux and using the fglrx driver, they do indeed have an effect. Only on AMDGPU (which MUST be used for RX cards) ignores them entirely, IIRC.

oh ... im using "old" HD7990

so on the R-OS Image they would effect mining? and also it should be possible to set temps and fans with claymore than? (not that i would need it but just for understanding)

and on the RX-OS everything is not happening at all?


When i understood it, i would take it on my FAQ section cause this undervolt/overclock/fansetting stuff is really a FAQ

[citronick]

ahhhhh i understand ... mostly u find these params in context of windows ... so probably setting them on linux is really useless.

Not the case - read what I said more closely: If you're on Linux and using the fglrx driver, they do indeed have an effect. Only on AMDGPU (which MUST be used for RX cards) ignores them entirely, IIRC.

oh ... im using "old" HD7990

so on the R-OS Image they would effect mining? and also it should be possible to set temps and fans with claymore than? (not that i would need it but just for understanding)

and on the RX-OS everything is not happening at all?


When i understood it, i would take it on my FAQ section cause this undervolt/overclock/fansetting stuff is really a FAQ

Yes - I don't use smOS, but his R-OS image pretty much certainly runs fglrx, while the "RX-OS" image would run AMDGPU. Since fglrx still has the ADL interface (which is common to Windows (all) and Linux (fglrx-only)), I believe Claymore's clocking & fanspeed options should function as advertised, yes - the voltage ones, I *highly* doubt it.

Also, what's with the seperate images? Just... dynamically select driver @ boot...

single image smOS for R and RX would nice.

bootup check: if Polaris = true load RX image else load R image fi ?

[webxass.de]

single image smOS for R and RX would nice.

bootup check: if Polaris = true load RX image else load R image fi ?

is it that simple!?

[tytanick]

single image smOS for R and RX would nice.

bootup check: if Polaris = true load RX image else load R image fi ?

is it that simple!?

There wil be nvidia+amd-gpu pro single image but i wont be integrating old fglrx into it
Dont see point right now, i need some free space also for future new miners programms.

[deadsix]

single image smOS for R and RX would nice.

bootup check: if Polaris = true load RX image else load R image fi ?

is it that simple!?

There wil be nvidia+amd-gpu pro single image but i wont be integrating old fglrx into it
Dont see point right now, i need some free space also for future new miners programms.

Eagerly awaiting Nvidia SmOS

[webxass.de]

single image smOS for R and RX would nice.

bootup check: if Polaris = true load RX image else load R image fi ?

is it that simple!?

There wil be nvidia+amd-gpu pro single image but i wont be integrating old fglrx into it
Dont see point right now, i need some free space also for future new miners programms.

u mean R-OS is not longer supported when nvidia comes?! that would be a killer!

[xleejohnx]

single image smOS for R and RX would nice.

bootup check: if Polaris = true load RX image else load R image fi ?

is it that simple!?

There wil be nvidia+amd-gpu pro single image but i wont be integrating old fglrx into it
Dont see point right now, i need some free space also for future new miners programms.

Nvidia + AMDGPU-PRO single image? Will this be able to mine on both an Nvidia GPU and an AMD GPU in the same rig?

If so... ohboy, I need some popcorn, cause this is gonna be a funny show.

I like tytanick and his OS but I'm with you wolf0 this is going to be a show with both in one!

It would be best to separate them

[Spookymango]

I'm trying to use the alternate z170 version of the smOS image, but I can't correctly write it to a usb stick using HDDRawCopy.

This one: https[Suspicious link removed]0ANDips0.imgc

It writes very slowly, and I get an error before its finished. Afterwards, I can't see/read anything on the disk in Windows, and I can't boot from it either. I've tried with several usb sticks.

What am I doing wrong? I tried a 32GB, 16GB, and 8GB usb stick with HDDRawCopy. Do I need to try writing using another tool?

[Crypto_Future]

Guys I have the following issue:

My asus strix rx 470 Mh/s fluctuate wildly (20-27) under smOS, if I run them on windows they hash stably, why is this happening?

[webxass.de]

Guys I have the following issue:

My asus strix rx 470 Mh/s fluctuate wildly (20-27) under smOS, if I run them on windows they hash stably, why is this happening?

question would be on which hashrate they stay stable ... are u benefitting of SMOS cause it runs from 20-27 instead of stable 20?

[YarMiner]

https://image.prntscr.com/image/_st6zOSPQvGIMTsWtL0Zew.png
Hi! What's wrong with SMOS today? Everything worked fine, but half of hour ago pool stopped receiving data from miner (Claymore 9.5). Then I tried to restart my rigs: the restarting process takes about 10 minutes per rig... Then I can see in console miner starting, some accepted shares, but I can't see info about hashrate here.

[webxass.de]

Hi! What's wrong with SMOS today? Everything worked fine, but half of hour ago pool stopped receiving data from miner (Claymore 9.5). Then I tried to restart my rigs: the restarting process takes about 10 minutes per rig... Then I can see in console miner starting, some accepted shares, but I can't see info about hashrate here.

y you think its SMOS related? do you >know< that the rig is working properly? 9.5 is more onstable on my side ... after running multiple days 9.4 it rebooted 3 times in a couple of hours on 9.5 with message "miner threat hang up"


btw. the temps are showing very precise, that the rig is NOT mining You better ssh into the rigs and check out whats going on

[xleejohnx]

Hi! What's wrong with SMOS today? Everything worked fine, but half of hour ago pool stopped receiving data from miner (Claymore 9.5). Then I tried to restart my rigs: the restarting process takes about 10 minutes per rig... Then I can see in console miner starting, some accepted shares, but I can't see info about hashrate here.

y you think its SMOS related? do you >know< that the rig is working properly? 9.5 is more onstable on my side ... after running multiple days 9.4 it rebooted 3 times in a couple of hours on 9.5 with message "miner threat hang up"


btw. the temps are showing very precise, that the rig is NOT mining You better ssh into the rigs and check out whats going on

I haven't had any issues even when I moved over to 9.5 the rigs still ran strong

https://imgur.com/a/QdtO8

[kharlos]

single image smOS for R and RX would nice.

bootup check: if Polaris = true load RX image else load R image fi ?

is it that simple!?

There wil be nvidia+amd-gpu pro single image but i wont be integrating old fglrx into it
Dont see point right now, i need some free space also for future new miners programms.

Nvidia + AMDGPU-PRO single image? Will this be able to mine on both an Nvidia GPU and an AMD GPU in the same rig?

If so... ohboy, I need some popcorn, cause this is gonna be a funny show.

I think you've misunderstood him. He isn't saying you can mine with Nvidia and AMD gpus on the same rig. He's saying smOS will come equipped with both drivers and will work with either GPUs without needing to install a different OS version.
You can't mix Nvidia and AMD GPUs on the same rig, but I don't see anywhere where he explicitly said you could.

[DUNC4N]

Sometimes gives a fault
GPU #0 got incorrect share. If you see this warning often, make sure you did not overclock it too much!'
GPU #2 got incorrect share. If you see this warning often, make sure you did not overclock it too much!
which can be gpu0 and gpu2 slot on the motherboard

Gigabyte GA-970A-DS3P rev 2

https://linustechtips.com/main/uploads/monthly_09_2014/post-143245-0-28359800-1411399103.jpg

[rufol]

Hey guys,

Today I ve noticed that OS has updated to verion 1098 and one of my cards (6-card rig) has disappeared from dashboard, does anyone experienced same or similar issue in past few days?

[bileq]

Sometimes gives a fault
GPU #0 got incorrect share. If you see this warning often, make sure you did not overclock it too much!'
GPU #2 got incorrect share. If you see this warning often, make sure you did not overclock it too much!
which can be gpu0 and gpu2 slot on the motherboard

Gigabyte GA-970A-DS3P rev 2

https://linustechtips.com/main/uploads/monthly_09_2014/post-143245-0-28359800-1411399103.jpg

same board same issue. i solved this to modify oc settings. lower mem clock little bit. or change power value

[benedictonathan]

Whoah!!! Buy looking at the diagrams, the terminologies, the processes, the things to do, and the way how the gentlemen here talk about it, it looks like Simple Mining is really not that simple as it is. I guess I need to read the whole thread to learn more about this. I really it is all about having a computer with an OS, install a mining program, put your wallet address, and one click - BOOM - you are mining $$$.

Anyway pardon my frustration about this. Reading the mining threads and it shows me that it is hard to mine coins.

[kharlos]

Whoah!!! Buy looking at the diagrams, the terminologies, the processes, the things to do, and the way how the gentlemen here talk about it, it looks like Simple Mining is really not that simple as it is. I guess I need to read the whole thread to learn more about this. I really it is all about having a computer with an OS, install a mining program, put your wallet address, and one click - BOOM - you are mining $$$.

Anyway pardon my frustration about this. Reading the mining threads and it shows me that it is hard to mine coins.

It actually is that simple. But unfortunately this ONE thread is addressing EVERY issue anyone has ever brought up. Including from the developer himself, so it looks very confusing.

I mentioned earlier that they should make a subreddit or something like that to organize these conversations.  

First off, lose the entitled attitude. Instead of just throwing up your hands, I'd just ask what you want to know.

All I did was go to simplemining.net and follow the instructions:
1) Install:  HDDRawCopy - flashing tool
2) Flash image provided in front page to any SSD drive (here he gives a video tutorial if you feel you need that; I didn't)
3) Take that SSD drive and put it into your rig
4) start the rig
5) log into simplemining.net and put in your wallet info (everything else is configured)
"boom"

I'd love to see another program that is that simple

[xleejohnx]

Sometimes gives a fault
GPU #0 got incorrect share. If you see this warning often, make sure you did not overclock it too much!'
GPU #2 got incorrect share. If you see this warning often, make sure you did not overclock it too much!
which can be gpu0 and gpu2 slot on the motherboard

Gigabyte GA-970A-DS3P rev 2

The first 16x slot is 90% of the time gpu0
Also the oc on windows don't always run as stable on Linux