MentalNomad
Member
Offline
Activity: 83
Merit: 10
|
|
October 20, 2017, 07:58:59 PM |
|
OK, I figured it out, and it may be useful for others... I sorted it by comparing the output of nvidia-smito the output of nvidia-smi -qinstead of nvidia-smi -q -d clockThe second command shows all the detail on the GPUs, while the third one only showed clock info. With all detail, I was able to match up current fan speeds and temps to confirm that this is correct for my case: GPU 0 = GPU 00000000:01:00.0 GPU 1 = GPU 00000000:02:00.0 GPU 2 = GPU 00000000:03:00.0 GPU 3 = GPU 00000000:04:00.0 GPU 4 = GPU 00000000:06:00.0 GPU 5 = GPU 00000000:07:00.0 GPU 6 = GPU 00000000:08:00.0 I've also learned that my mixed 1070's have different power requirements, so I'm going to tweak that in 1bash and see if that can help me optimize further: GPU 00000000:01:00.0 Min Power Limit : 75.00 W Max Power Limit : 170.00 W GPU 00000000:02:00.0 Min Power Limit : 92.50 W Max Power Limit : 208.00 W GPU 00000000:03:00.0 Min Power Limit : 92.50 W Max Power Limit : 226.00 W GPU 00000000:04:00.0 Min Power Limit : 110.00 W Max Power Limit : 264.00 W GPU 00000000:06:00.0 Min Power Limit : 110.00 W Max Power Limit : 264.00 W GPU 00000000:07:00.0 Min Power Limit : 92.50 W Max Power Limit : 208.00 W GPU 00000000:08:00.0 Min Power Limit : 75.00 W Max Power Limit : 170.00 W
|
|
|
|
tomlev5
Newbie
Offline
Activity: 35
Merit: 0
|
|
October 20, 2017, 08:48:46 PM |
|
fullzero, you mentioned active cooling for 1080tis with 133 CFM 120mm fans. I’m interested in this solution, but I’m not sure if I will be able to put it together. Can you please share some details.
Do you remove original fans and cover so that only the cooler fins remain? How do you mount fans? How do you power the fans?
|
|
|
|
elsystem
Newbie
Offline
Activity: 46
Merit: 0
|
|
October 20, 2017, 09:28:29 PM |
|
Has anyone tested running the MSI Z170A GAMING M5 with 8 GPUs, with an m2 adapter for the 8th GPU?
I'm using Asus Z270 P with 2 GPU's on M2 slot using adapter. I know its a different mobo, are you getting any sorts of problems?? I haven't tried it yet. Was just asking to see if anyone has already done it before I add another GPU.
|
|
|
|
zbfountain
Newbie
Offline
Activity: 3
Merit: 0
|
|
October 21, 2017, 05:44:27 AM |
|
Im trying dual mining. ETH+DCR no problem with ETH. But failed in DCR. Managed to connect to DCR pool. But Authorization failed, all shares rejected. I guess I didnot use right command to set DCR worker password. DCR mining requires worker password.
Currently I put: DCR_PASSWORD="xxx" Does this work?
Please help to create command . Thank you so much.
|
|
|
|
damNmad
Full Member
Offline
Activity: 378
Merit: 104
nvOC forever
|
|
October 21, 2017, 08:59:42 AM |
|
OK, I figured it out, and it may be useful for others... I sorted it by comparing the output of nvidia-smito the output of nvidia-smi -qinstead of nvidia-smi -q -d clockThe second command shows all the detail on the GPUs, while the third one only showed clock info. With all detail, I was able to match up current fan speeds and temps to confirm that this is correct for my case: GPU 0 = GPU 00000000:01:00.0 GPU 1 = GPU 00000000:02:00.0 GPU 2 = GPU 00000000:03:00.0 GPU 3 = GPU 00000000:04:00.0 GPU 4 = GPU 00000000:06:00.0 GPU 5 = GPU 00000000:07:00.0 GPU 6 = GPU 00000000:08:00.0 I've also learned that my mixed 1070's have different power requirements, so I'm going to tweak that in 1bash and see if that can help me optimize further: GPU 00000000:01:00.0 Min Power Limit : 75.00 W Max Power Limit : 170.00 W GPU 00000000:02:00.0 Min Power Limit : 92.50 W Max Power Limit : 208.00 W GPU 00000000:03:00.0 Min Power Limit : 92.50 W Max Power Limit : 226.00 W GPU 00000000:04:00.0 Min Power Limit : 110.00 W Max Power Limit : 264.00 W GPU 00000000:06:00.0 Min Power Limit : 110.00 W Max Power Limit : 264.00 W GPU 00000000:07:00.0 Min Power Limit : 92.50 W Max Power Limit : 208.00 W GPU 00000000:08:00.0 Min Power Limit : 75.00 W Max Power Limit : 170.00 W This is quite useful handy stuff to have, hope these will help me to improve my RIG's efficiency based on individual power limits. Thanks for that.
|
|
|
|
damNmad
Full Member
Offline
Activity: 378
Merit: 104
nvOC forever
|
|
October 21, 2017, 09:08:58 AM |
|
Im trying dual mining. ETH+DCR no problem with ETH. But failed in DCR. Managed to connect to DCR pool. But Authorization failed, all shares rejected. I guess I didnot use right command to set DCR worker password. DCR mining requires worker password.
Currently I put: DCR_PASSWORD="xxx" Does this work?
Please help to create command . Thank you so much.
Why do you want to put dcr password for dual mining?? Can you please share the output of the command? After starting the mining process, type this command in guake terminal (new tab) ps aux | grep miner You should get something like this m1@m1-desktop:~$ ps aux | grep miner m1 4963 0.0 0.0 14224 964 pts/16 S+ 10:06 0:00 grep --color=auto miner m1 19889 0.0 0.0 27352 2956 ? Ss Oct19 0:01 SCREEN -dmS miner /home/m1/KTccminer-cryptonight/ccminer -o stratum+tcp://pool.b2bcoin.ml:5555 -u address -p x m1 19890 0.0 0.0 27056 2848 pts/17 S+ Oct19 0:00 screen -r miner m1 19891 0.7 9.8 124502204 790228 pts/21 Ssl+ Oct19 19:01 /home/m1/KTccminer-cryptonight/ccminer -o stratum+tcp://pool.b2bcoin.ml:5555 -u Address -p x Please paste the output of it here so that I can help you with further.
|
|
|
|
damNmad
Full Member
Offline
Activity: 378
Merit: 104
nvOC forever
|
|
October 21, 2017, 09:11:04 AM |
|
Has anyone tested running the MSI Z170A GAMING M5 with 8 GPUs, with an m2 adapter for the 8th GPU?
I'm using Asus Z270 P with 2 GPU's on M2 slot using adapter. I know its a different mobo, are you getting any sorts of problems?? I haven't tried it yet. Was just asking to see if anyone has already done it before I add another GPU. I think you should just give a try and see if it works, given its not that hard to fit that adapter. Leaving the adapter on mobo doesn't cause any harm even if your are not using it. So, go ahead and give it a go.
|
|
|
|
Mikesol
Newbie
Offline
Activity: 50
Merit: 0
|
|
October 21, 2017, 10:33:35 AM |
|
Hi all,
looking for a motherboard to build 6GPU rig on nvOC, what's the best choice of Mobo+CPU based on price/quality/performance/nvOC19 compatability/etc, what would be your choice. Source is Amazon.com
Thanks for your opinion
you can PM me
I think the best bet is the Gigabyte GA-H110-D3A, its a bit more expensive than the ASRock H81 Pro BTC but uses more modern CPU and RAM, so if you want to expand later you can swap the motherboard for a ASROCK H110 PRO BTC and use the same CPU and RAM and have 13 GPU's.
|
|
|
|
Alienbert
Newbie
Offline
Activity: 26
Merit: 0
|
|
October 21, 2017, 10:36:34 AM |
|
Hi guys!
is it possible to split a Rig with 13 cards to mine 2 algos? Maybe 7 cards Ethash and 6 cards Equihash?
thanks
|
|
|
|
Aureliusy
|
|
October 21, 2017, 10:40:38 AM |
|
Does it have support for the Xevan protocol? Been mining on windows with afterburner, but looking for a switch to learn something new (very small hobby mining)
|
|
|
|
grunoff
Newbie
Offline
Activity: 63
Merit: 0
|
|
October 21, 2017, 12:27:27 PM |
|
I set to mine ZEC with ZM in 1bash. I turned of watchdog and TempControl.
I just want to make it autostart mining on boot. And want to watch on screen of miner via putty. I hope all file are there. I`ll reload img again, flash it from zero. And set it up again. Will see.
Thanks. Thanks.
Ok, so presumably it works with EWBF? I found that if I start with the 19.1.3 image (as opposed to upgrading to that version via 4update), there is a problem with the ZM miner binary. 3main uses: HCD='/home/m1/zec/zm/5_1/zm_miner' I did not have that version with the 19.1.3 image that I downloaded. Make sure that you have the miner in that location. You were right the issue were in path ... It was trying to launch miner from the folder that was absent. Thanks. Another one issue. I can`t open telemetry on ZM. I`m setting it to 0.0.0.0:42002. The miner says telemetry was set. But I can`t open it with browser. It shows nothing. Thank you in advance.
|
|
|
|
Rumo
Newbie
Offline
Activity: 41
Merit: 0
|
|
October 21, 2017, 01:22:36 PM |
|
Hi Guys
First of all. Thanks for the good work. I like nvOC a lot. Second Thanks Papampi for the wtm switch. It is brilliant. But maybe I'm to stupid to use it. How can i add the nicehash algos to the switcher? If i add nice_equihash to the list it just ignores it.
Thanks
Matze
|
|
|
|
Mikesol
Newbie
Offline
Activity: 50
Merit: 0
|
|
October 21, 2017, 02:30:30 PM |
|
I have seen a 5 inch touch screen on Amazon intended for the Raspberry Pi. It takes an HDMI input and the touch output is via USB. It apparently works with Ubuntu on the Pi. Wonder if the touch screen support is in the nvOC version of Ubuntu? It would look really cute sitting on top of my rig.
|
|
|
|
zbfountain
Newbie
Offline
Activity: 3
Merit: 0
|
|
October 21, 2017, 03:22:17 PM |
|
https://www.dropbox.com/s/8j89ha0a6m7nee6/file%20%281%29.jpg?dl=0Sorry, dont know how to insert picture. please see it in my shared link. seems the password command is not right. appreciate your help! Thanks. Im trying dual mining. ETH+DCR no problem with ETH. But failed in DCR. Managed to connect to DCR pool. But Authorization failed, all shares rejected. I guess I didnot use right command to set DCR worker password. DCR mining requires worker password.
Currently I put: DCR_PASSWORD="xxx" Does this work?
Please help to create command . Thank you so much.
Why do you want to put dcr password for dual mining?? Can you please share the output of the command? After starting the mining process, type this command in guake terminal (new tab) ps aux | grep miner You should get something like this m1@m1-desktop:~$ ps aux | grep miner m1 4963 0.0 0.0 14224 964 pts/16 S+ 10:06 0:00 grep --color=auto miner m1 19889 0.0 0.0 27352 2956 ? Ss Oct19 0:01 SCREEN -dmS miner /home/m1/KTccminer-cryptonight/ccminer -o stratum+tcp://pool.b2bcoin.ml:5555 -u address -p x m1 19890 0.0 0.0 27056 2848 pts/17 S+ Oct19 0:00 screen -r miner m1 19891 0.7 9.8 124502204 790228 pts/21 Ssl+ Oct19 19:01 /home/m1/KTccminer-cryptonight/ccminer -o stratum+tcp://pool.b2bcoin.ml:5555 -u Address -p x Please paste the output of it here so that I can help you with further.
|
|
|
|
CryptAtomeTrader44
Full Member
Offline
Activity: 340
Merit: 103
It is easier to break an atom than partialities AE
|
|
October 21, 2017, 03:26:05 PM |
|
Hi Guys
First of all. Thanks for the good work. I like nvOC a lot. Second Thanks Papampi for the wtm switch. It is brilliant. But maybe I'm to stupid to use it. How can i add the nicehash algos to the switcher? If i add nice_equihash to the list it just ignores it.
Thanks
Matze
yes, because there are different switches already implemented in NVOC. Switches that allow you to choose which pools you mine. The WTM switch is a little different because unlike the nicehash-switch and minningpoolhub_switch, it allows you to mine in all directions according to what you have selected in the list of coins implemented in the 1bash. So if you want to mine towards nicehash, you will have to use Scott Alfter's switch (nicehash switch ou mph_switch). Same thing for the MPH_Switch which will undermine it to minningpoolhub (and which only supports the pools managed by MinningPoolHub, so not necessarily all those of the site Whattomine or implemented in the 1bash) You must make a choice. But anyway, it is common that nicehash is not long in front and that the returned BTC is not so far from that of the coins below or above.
|
|
|
|
CryptAtomeTrader44
Full Member
Offline
Activity: 340
Merit: 103
It is easier to break an atom than partialities AE
|
|
October 21, 2017, 03:36:17 PM |
|
I have seen a 5 inch touch screen on Amazon intended for the Raspberry Pi. It takes an HDMI input and the touch output is via USB. It apparently works with Ubuntu on the Pi. Wonder if the touch screen support is in the nvOC version of Ubuntu? It would look really cute sitting on top of my rig.
Buy it and give us you opinion about its functionnality and utility. If you think it does not functionnal ou not usable, return it to amazon or mercantwhere you buy it. But, i can-t see his utilization or advantage for a rig.
|
|
|
|
CryptAtomeTrader44
Full Member
Offline
Activity: 340
Merit: 103
It is easier to break an atom than partialities AE
|
|
October 21, 2017, 03:39:46 PM |
|
Does it have support for the Xevan protocol? Been mining on windows with afterburner, but looking for a switch to learn something new (very small hobby mining)
It seems to me that someone post about this algo a few days and few pages before on this thread. For BTX if i remember correctly. I think if you Seach in this thread (with BTTalk engine and the word "xervan"), you will find your responses.
|
|
|
|
grunoff
Newbie
Offline
Activity: 63
Merit: 0
|
|
October 21, 2017, 04:12:40 PM |
|
Can I somehow modify ssh port? Because I have 2 rigs with the same external IP and I connect to it, and the portforward via router to the PC. For the easy portforward setup it could be better to modify ssh port from 22 to for example 23 for second PC.
Thanks.
|
|
|
|
Stubo
Member
Offline
Activity: 224
Merit: 13
|
|
October 21, 2017, 04:15:34 PM |
|
You were right the issue were in path ... It was trying to launch miner from the folder that was absent. Thanks.
Another one issue. I can`t open telemetry on ZM. I`m setting it to 0.0.0.0:42002. The miner says telemetry was set. But I can`t open it with browser. It shows nothing.
Thank you in advance.
That part (API on port xxxx) doesn't work for me either so I just use "screen -r miner" (or screen -dr miner if LOCALorREMOTE=LOCAL) from ssh when I want to check in on it.
|
|
|
|
Temporel
|
|
October 21, 2017, 04:44:44 PM |
|
Can I somehow modify ssh port? Because I have 2 rigs with the same external IP and I connect to it, and the portforward via router to the PC. For the easy portforward setup it could be better to modify ssh port from 22 to for example 23 for second PC.
Thanks.
you keep the local port to 22 on every rig but use a different one for each of your rig in your router. eg: rig1 internal port 22 and external port 7122 rig2 internal port 22 and external port 7222 with putty use -P portnumber in your shotcut or change the port in the gui
|
|
|
|
|