PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[alexpopov78]

After a few hours of work I get the following message and the miner stop mining.
Can anyone help?



https://uni-campus.net/owncloud/index.php/s/buJyYf6HHrZPj0h

[batsonxl]

hello guys , is it possible to carry on running my rx570 8gb card on 5.2e (eth) and use my 2x rx470 4gb on 5.3b (etc)?
if so whats the command please , thanks in advance.

if you look up you will find answer. it was answered 10 times

[Biterion]

very frustated to run phoenixminer, while last use other miner.
i get error: Allocating buffers failed with clCreatedBuffers (-61)

https://i.ibb.co/8KcdKX6/error.jpg

i use 3X RX480 8Gb + 2X R9 390 8Gb
running on nicehash using bat file

can someone tell me about this error and how to solve it.
thank you

[batsonxl]

very frustated to run phoenixminer, while last use other miner.
i get error: Allocating buffers failed with clCreatedBuffers (-61)

https://i.ibb.co/8KcdKX6/error.jpg

i use 3X RX480 8Gb + 2X R9 390 8Gb
running on nicehash using bat file

can someone tell me about this error and how to solve it.
thank you

What driver version is that?

[Dowper_]

very frustated to run phoenixminer, while last use other miner.
i get error: Allocating buffers failed with clCreatedBuffers (-61)

https://i.ibb.co/8KcdKX6/error.jpg

i use 3X RX480 8Gb + 2X R9 390 8Gb
running on nicehash using bat file

can someone tell me about this error and how to solve it.
thank you

Update your driver.

[ivomm]

very frustated to run phoenixminer, while last use other miner.
i get error: Allocating buffers failed with clCreatedBuffers (-61)

https://i.ibb.co/8KcdKX6/error.jpg

i use 3X RX480 8Gb + 2X R9 390 8Gb
running on nicehash using bat file

can someone tell me about this error and how to solve it.
thank you

I also have 390's and got some serious troubles with them.
1. On Windows the hash dropped by 50% a long time ago due to drivers issue. There is no workaround for that known to me. And who would like to mine at 17 Mh with a power consumption 220-250W (at best with undervolted bios)?
2. On linux based OS with Claymore everything is fine, cards mine with 30 Mh/s, but the miner will stop working in a few weeks.
3. Practically every other miner I've tried - ethminer, nbminer, gminer and lolminer, half of the cards are not hashing under linux based OS. If someone has the patience and skills to run with Ubuntu 14 and Amd drivers 17, it may work at the end. But I prefer plug and play OS like smos or hiveos.
4. The only miner that can support different kernels is phoenixminer. With parameters -clKernel 0 -clNew 0 (i.e. the generic kernels) all cards are hashing, BUT, as the developer commented a few pages back, the stale shares are too many. If I mine with the default intensity they go over 20%. If I lower the intensity -mi 7, they drop to 10%, but still not good. For example, with Claymore I have the full 30 Mh with less than 1% stale shares. May be even below 0.1%.
5. For some reason smos and hiveos are crashing on start when I run a mixed rig with 390 cards and rx cards. Tomorrow I will try 390's with nvidia 1060 under hiveos, but I have no high hopes for this to work either.

[Biterion]

very frustated to run phoenixminer, while last use other miner.
i get error: Allocating buffers failed with clCreatedBuffers (-61)

https://i.ibb.co/8KcdKX6/error.jpg

i use 3X RX480 8Gb + 2X R9 390 8Gb
running on nicehash using bat file

can someone tell me about this error and how to solve it.
thank you

What driver version is that?

very frustated to run phoenixminer, while last use other miner.
i get error: Allocating buffers failed with clCreatedBuffers (-61)

https://i.ibb.co/8KcdKX6/error.jpg

i use 3X RX480 8Gb + 2X R9 390 8Gb
running on nicehash using bat file

can someone tell me about this error and how to solve it.
thank you

Update your driver.

I used driver 19.12.1

after update AMD Driver, just only work 4 GPU..
absolutly i have 5 GPU installed

https://i.ibb.co/6BPsDjM/5GPU.jpg

after used  atikmdag-patcher-1.4.7 and 6xGPU_mod_1_0_0_1,restart...  nothing changes

if i run phoenixminer 5.3b, my RX480 just show 8-9Mhs only...

https://i.ibb.co/8YYFWBb/RXHASH.jpg

need help, please..

thanks

[cscheat]

very frustated to run phoenixminer, while last use other miner.
i get error: Allocating buffers failed with clCreatedBuffers (-61)

https://i.ibb.co/8KcdKX6/error.jpg

i use 3X RX480 8Gb + 2X R9 390 8Gb
running on nicehash using bat file

can someone tell me about this error and how to solve it.
thank you

What driver version is that?

very frustated to run phoenixminer, while last use other miner.
i get error: Allocating buffers failed with clCreatedBuffers (-61)

https://i.ibb.co/8KcdKX6/error.jpg

i use 3X RX480 8Gb + 2X R9 390 8Gb
running on nicehash using bat file

can someone tell me about this error and how to solve it.
thank you

Update your driver.

I used driver 19.12.1

after update AMD Driver, just only work 4 GPU..
absolutly i have 5 GPU installed

https://i.ibb.co/6BPsDjM/5GPU.jpg

after used  atikmdag-patcher-1.4.7 and 6xGPU_mod_1_0_0_1,restart...  nothing changes

if i run phoenixminer 5.3b, my RX480 just show 8-9Mhs only...

https://i.ibb.co/8YYFWBb/RXHASH.jpg

need help, please..

thanks

go install AMD DRIVER ver 20.4.2

[Biterion]

very frustated to run phoenixminer, while last use other miner.
i get error: Allocating buffers failed with clCreatedBuffers (-61)

https://i.ibb.co/8KcdKX6/error.jpg

i use 3X RX480 8Gb + 2X R9 390 8Gb
running on nicehash using bat file

can someone tell me about this error and how to solve it.
thank you

I also have 390's and serious troubles with them.
1. On Windows the hash dropped by 50% a long time ago due to drivers issue. There is no workaround for that known to me. And who would like to mine at 17 Mh with a power consumption 220-250W (at best with undervolted bios)?
2. On linux based OS with Claymore everything is fine but the miner will stop workig in a few weeks.
3. Practically every other miner I've tried - ethminer, nbminer, gminer and lolminer, half of the cards are not hashing under linux based OS. If someone has the patience and skills to run with Ubuntu 14 and Amd drivers 17, it may work at the end. But I prefer plug and play OS like smos or hiveos.
4. The only miner that can support different kernels is phoenixminer. With parameters -clKernel 0 -clNew 0 (i.e. the generic kernels) all cards are hashing, BUT, as the developer commented a few pages back, the stale shares are too many. If I mine with the default intensity they go over 20%. If I lower the intensity -mi 7, they drop to 10%, but still not good. For example, with Claymore I have the full 30 Mh with less than 1% stale shares. May be even below 0.1%.
5. For some reason smos and hiveos are crashing on start when I run a mixed rig with 390 cards and rx cards. Tomorrow I will try 390's with nvidia 1060 under hiveos, but I have no high hopes for this to work either.

now i run with Win7 OS..
my R9 390 only get 18-19 Mhs with Clay####, but now i just get 14-15 using Phoenixminer
any sugestion ?

go install AMD DRIVER ver 20.4.2

i'll try and will update

[HaloGenius]

Ok, I tried :

Code:

PhoenixMiner.exe -bench 400 -coin ETC -pool mordor.pool.fault.dev:8008  -wal 0x008c26f3a2Ca8bdC11e5891e0278c9436B6F5d1E.Rig001 

But connexion to pool is rejected.

Nobody is using this pool now. I supposed, it is broken...

Pool don't like rig name - remove it and leave only wallet

[laineux]

Ok, I tried :

Code:

PhoenixMiner.exe -bench 400 -coin ETC -pool mordor.pool.fault.dev:8008  -wal 0x008c26f3a2Ca8bdC11e5891e0278c9436B6F5d1E.Rig001 

But connexion to pool is rejected.

Nobody is using this pool now. I supposed, it is broken...

Pool don't like rig name - remove it and leave only wallet

You're right, without rig name connexion is OK
But all shares are rejected...

I will test live in few hours.

[UnclWish]

very frustated to run phoenixminer, while last use other miner.
i get error: Allocating buffers failed with clCreatedBuffers (-61)

https://i.ibb.co/8KcdKX6/error.jpg

i use 3X RX480 8Gb + 2X R9 390 8Gb
running on nicehash using bat file

can someone tell me about this error and how to solve it.
thank you

Look's like Windows 7 with blockchain drivers. You need Windows 10 and latest drivers.

[Biterion]

go install AMD DRIVER ver 20.4.2

after update my AMD Driver using 20.4.2, i've still having problem like before..
- 5 GPu work only 4
- RX480 just get 9mhs
- after a few minutes miner shows error: Allocating buffers failed with clCreatedBuffers (-61) and stop

https://i.postimg.cc/7ZByTSJR/miner2.jpg

my problem never solved..
sad mode: ON

[cscheat]

go install AMD DRIVER ver 20.4.2

after update my AMD Driver using 20.4.2, i've still having problem like before..
- 5 GPu work only 4
- RX480 just get 9mhs
- after a few minutes miner shows error: Allocating buffers failed with clCreatedBuffers (-61) and stop

https://i.postimg.cc/7ZByTSJR/miner2.jpg

my problem never solved..
sad mode: ON

Windows 10 please....

also could be bad gpu or risers

[Biterion]

Windows 10 please....

also could be bad gpu or risers

ok,.. i'll try to update to win10

[t-air]

if i have rig with first card 8GB and rest  4GB, will it mine ETH after block exceeds 4GB ? if not Phoenix miner, any other miner which will allow to mine ETH with current setup?

[miner29]

if i have rig with first card 8GB and rest  4GB, will it mine ETH after block exceeds 4GB ? if not Phoenix miner, any other miner which will allow to mine ETH with current setup?

Not without huge penality.   Just because your first card is 8gb each card has to have its own copy of DAG..so cards with 4gb are already mining slower and will continue to degrade even with zombie mode. 

Might consider switching to mining etc as they are reducing dag to 3gb so 4gb cards can mine.  But ywa the end of 4gb eth mining is very soon.

[zinou51]

can someone tell me how can we set pool difficulty manualy on the miner ?
didn't find it anywhere  even on the readme.txt

[batsonxl]

go install AMD DRIVER ver 20.4.2

after update my AMD Driver using 20.4.2, i've still having problem like before..
- 5 GPu work only 4
- RX480 just get 9mhs
- after a few minutes miner shows error: Allocating buffers failed with clCreatedBuffers (-61) and stop



my problem never solved..
sad mode: ON

No it is not risers
1st make sure just run only 1 RX card. DDU the driver on safe mode then install 1card RX then install 20.11.1 driver. after turn compute mode on. after make your settings and OC setting using amd wattman or overdriventool. look what you get with 1 card if it is hashing normal then keep adding your cards back. is it bios modded cards? and delete all those commands just run clean phoenixminer.exe. you can leave proto 4 and stales 0 pass x for nicehash.

[rozsada]

go install AMD DRIVER ver 20.4.2

after update my AMD Driver using 20.4.2, i've still having problem like before..
- 5 GPu work only 4
- RX480 just get 9mhs
- after a few minutes miner shows error: Allocating buffers failed with clCreatedBuffers (-61) and stop



my problem never solved..
sad mode: ON

No it is not risers
1st make sure just run only 1 RX card. DDU the driver on safe mode then install 1card RX then install 20.11.1 driver. after turn compute mode on. after make your settings and OC setting using amd wattman or overdriventool. look what you get with 1 card if it is hashing normal then keep adding your cards back. is it bios modded cards? and delete all those commands just run clean phoenixminer.exe. you can leave proto 4 and stales 0 pass x for nicehash.

Your solution is the next:
1. win10
2. driver 20.4.2
3. patch by 'atikmdag-patcher-1.4.8'
4. switch to compute mode by 'AMD-Compute-Switcher'
restart and enjoy)))