Queelis
Newbie
Offline
Activity: 36
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 28, 2011, 11:16:42 AM |
|
Finally my newb time is over so I can thank ckolivas for his great miner. Initially I was about to ask about 2.0.8's strange behaviour (upon restarts my hash rate would change between 84 and 64 Mhash/s, which is not insignificant). Version 2.1.0 seems to have fixed that (though q for quitting is broken, I can affirm that) - so now I have an average of 84.7 Mhash/s for my Radeon 4830, which is much higher than the table at Mining hardware comparison seems to suggest (and at 69.7 Mhash/s, higher than I was getting with GUIminer). Cheers!
|
|
|
|
JinTu
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 28, 2011, 05:18:14 PM |
|
Hi Con, It looks like api-example.c, api-example.php, API.java/API.class and miner.php didn't get packaged up in the 2.1.0 source tarball. I see they are there in GIT but the README implies they are included in the main distribution.
|
|
|
|
Proofer
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 266
Merit: 36
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 28, 2011, 05:21:24 PM |
|
-------------------------------------------------------------------------------- [P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit GPU 0: 72.5C 4403RPM | 359.9/361.5Mh/s | A:5435 R:3 HW:0 U:4.99/m I:9 GPU 1: 76.5C | 359.8/361.8Mh/s | A:5413 R:10 HW:0 U:4.97/m I:9 GPU 2: 72.5C 3617RPM | 364.6/361.3Mh/s | A:5284 R:7 HW:0 U:4.85/m I:9 GPU 3: 67.5C | 365.7/361.5Mh/s | A:5349 R:5 HW:0 U:4.91/m I:9 GPU 4: 73.0C 3255RPM | 362.8/361.5Mh/s | A:5391 R:7 HW:0 U:4.95/m I:9 GPU 5: 76.0C | 368.0/361.7Mh/s | A:5417 R:10 HW:0 U:4.97/m I:9 --------------------------------------------------------------------------------
The spacing and misalignment problem is still with us, in this instance due to double-digit rejects for a couple of GPUs. But as indicated by the hyphen borders, LOOK AT ALL THAT WASTED SPACE ON THE RIGHT!!11!!1 Some field widths could be increased. My plan is to fix this; might take a few days (due to my schedule, not coding time). If someone else wants to do it, please let me know.
|
|
|
|
JinTu
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 28, 2011, 09:01:51 PM Last edit: April 10, 2012, 11:50:04 PM by JinTu |
|
Here is my quick and dirty Perl implementation of api-example. Just copy and save this as api-example.pl. Note, you need to have the JSON Perl module installed to use this (perl-JSON for RH-based distros). #!/usr/bin/perl -w #
# # Simple Perl script to query and parse cgminer API stats in JSON # ###################### ## Usage ## ###################### # # perl api-example.pl command # ###################### ## Revision History ## ###################### # # v0.02 4/10/2012 JinTu (jintuNO@SPAMpraecogito.com) # Bugfix: Support for multi element arrays in responses # # v0.01 12/28/2011 JinTu (jintuNO@SPAMpraecogito.com) # First working version. Supports cgminer 2.1.0 API JSON format # ##
use strict; use IO::Socket; use JSON -support_by_pp;
my $cgminer_host = "localhost"; my $cgminer_port = "4028";
my $remote = IO::Socket::INET->new( Proto => "tcp", PeerAddr => $cgminer_host, PeerPort => $cgminer_port, ) or die "cannot connect to port $cgminer_host:$cgminer_port, $!\n";
my $command; my $parameter; if ($ARGV[0]) { # look for parameters in addition to a command unless (($command,$parameter) = $ARGV[0] =~ m/(.*)\|(.*)/) { $command = $ARGV[0]; } } else { # We didn't get an argument so default to sending summary $command = "summary"; }
# Send the JSON query if ($parameter) { print $remote '{"command":"' . $command . '","parameter":"' . $parameter . '"}'; } else { print $remote '{"command":"' . $command . '"}'; }
# Now read the result my $response = <$remote>;
print $command . " returned \'$response\'\n";
# Now parse the JSON my $json = new JSON;
# these are some nice json options to relax restrictions a bit: my $json_text = $json->allow_nonref->utf8->relaxed->escape_slash->loose->allow_singlequote->allow_barekey->decode($response);
foreach my $tlc (keys %{$json_text}){ print "\n$tlc\n"; if ($json_text->{$tlc} =~ /array/i) { for (my $i = 0; $i <= (scalar @{$json_text->{$tlc}} - 1); $i++) { print "->[$i]\n"; foreach my $cat (keys %{$json_text->{$tlc}->[$i]}) { print "\t$cat=" . $json_text->{$tlc}->[$i]->{$cat} . "\n"; } } } else { # This is not an array so just print it print "\t" . $json_text->{$tlc} . "\n"; } }
# make sure we close the socket $remote->close();
This will give you output like the following: [JinTu@acheron ]$ perl api-example.pl summary returned '{"STATUS":[{"STATUS":"S","Code":11,"Msg":"Summary","Description":"cgminer 2.3.1"}],"SUMMARY":[{"Elapsed":17227,"MHS av":855.59,"Found Blocks":0,"Getworks":5060,"Accepted":3546,"Rejected":10,"Hardware Errors":0,"Utility":12.35,"Discarded":373,"Stale":5,"Get Failures":10,"Local Work":0,"Remote Failures":5,"Network Blocks":31,"Total MH":14739525.4682}],"id":1}'
SUMMARY ->[0] Local Work=0 Hardware Errors=0 Total MH=14739525.4682 MHS av=855.59 Stale=5 Network Blocks=31 Elapsed=17227 Rejected=10 Discarded=373 Utility=12.35 Get Failures=10 Found Blocks=0 Getworks=5060 Remote Failures=5 Accepted=3546
STATUS ->[0] Code=11 Msg=Summary STATUS=S Description=cgminer 2.3.1
id 1
[JinTu@acheron ]$ perl api-example.pl devs devs returned '{"STATUS":[{"STATUS":"S","Code":9,"Msg":"4 GPU(s)","Description":"cgminer 2.3.1"}],"DEVS":[{"GPU":0,"Enabled":"Y","Status":"Alive","Temperature":76 .00,"Fan Speed":3108,"Fan Percent":50,"GPU Clock":470,"Memory Clock":150,"GPU Voltage":1.000,"GPU Activity":94,"Powertune":0,"MHS av":195.33,"MHS 5s":192.98,"Acce pted":824,"Rejected":4,"Hardware Errors":0,"Utility":2.90,"Intensity":"D","Last Share Pool":0,"Last Share Time":1334101418,"Total MH":3325785.6696},{"GPU":1,"Enab led":"Y","Status":"Alive","Temperature":75.50,"Fan Speed":-1,"Fan Percent":50,"GPU Clock":500,"Memory Clock":150,"GPU Voltage":1.000,"GPU Activity":99,"Powertune" :0,"MHS av":219.29,"MHS 5s":219.97,"Accepted":888,"Rejected":4,"Hardware Errors":0,"Utility":3.13,"Intensity":"8","Last Share Pool":0,"Last Share Time":1334101419 ,"Total MH":3733853.3069},{"GPU":2,"Enabled":"Y","Status":"Alive","Temperature":72.50,"Fan Speed":3034,"Fan Percent":50,"GPU Clock":500,"Memory Clock":150,"GPU Vo ltage":1.000,"GPU Activity":99,"Powertune":0,"MHS av":220.79,"MHS 5s":220.81,"Accepted":883,"Rejected":2,"Hardware Errors":0,"Utility":3.11,"Intensity":"8","Last Share Pool":0,"Last Share Time":1334101386,"Total MH":3759237.2347},{"GPU":3,"Enabled":"Y","Status":"Alive","Temperature":75.00,"Fan Speed":-1,"Fan Percent":50,"G PU Clock":500,"Memory Clock":150,"GPU Voltage":1.000,"GPU Activity":0,"Powertune":0,"MHS av":220.07,"MHS 5s":220.24,"Accepted":911,"Rejected":0,"Hardware Errors": 0,"Utility":3.21,"Intensity":"8","Last Share Pool":0,"Last Share Time":1334101436,"Total MH":3747107.3075}],"id":1}'
DEVS ->[0] Total MH=3325785.6696 Last Share Time=1334101418 Fan Percent=50 Fan Speed=3108 Status=Alive Last Share Pool=0 Utility=2.9 MHS 5s=192.98 Temperature=76 Memory Clock=150 GPU Activity=94 Accepted=824 Hardware Errors=0 MHS av=195.33 Enabled=Y GPU Voltage=1 Rejected=4 GPU Clock=470 GPU=0 Intensity=D Powertune=0 ->[1] Total MH=3733853.3069 Last Share Time=1334101419 Fan Percent=50 Fan Speed=-1 Status=Alive Last Share Pool=0 Utility=3.13 MHS 5s=219.97 Temperature=75.5 Memory Clock=150 GPU Activity=99 Accepted=888 Hardware Errors=0 MHS av=219.29 Enabled=Y GPU Voltage=1 Rejected=4 GPU Clock=500 GPU=1 Intensity=8 Powertune=0 ->[2] Total MH=3759237.2347 Last Share Time=1334101386 Fan Percent=50 Fan Speed=3034 Status=Alive Last Share Pool=0 Utility=3.11 MHS 5s=220.81 Temperature=72.5 Memory Clock=150 GPU Activity=99 Accepted=883 Hardware Errors=0 MHS av=220.79 Enabled=Y GPU Voltage=1 Rejected=2 GPU Clock=500 GPU=2 Intensity=8 Powertune=0 ->[3] Total MH=3747107.3075 Last Share Time=1334101436 Fan Percent=50 Fan Speed=-1 Status=Alive Last Share Pool=0 Utility=3.21 MHS 5s=220.24 Temperature=75 Memory Clock=150 GPU Activity=0 Accepted=911 Hardware Errors=0 MHS av=220.07 Enabled=Y GPU Voltage=1 Rejected=0 GPU Clock=500 GPU=3 Intensity=8 Powertune=0
STATUS ->[0] Code=9 Msg=4 GPU(s) STATUS=S Description=cgminer 2.3.1
id 1
|
|
|
|
Proofer
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 266
Merit: 36
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 28, 2011, 09:25:03 PM |
|
Another voice added to the increasing murmur:
In response to Q, after normal/complete console and log output:
./start.sh: line 5: 9166 Segmentation fault DISPLAY=:0 cgminer -c cgminer.conf 2> logs/$now.log
2.1.0 on Ubuntu 11.04
|
|
|
|
JinTu
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 28, 2011, 09:36:24 PM |
|
Another voice added to the increasing murmur:
In response to Q, after normal/complete console and log output:
./start.sh: line 5: 9166 Segmentation fault DISPLAY=:0 cgminer -c cgminer.conf 2> logs/$now.log
2.1.0 on Ubuntu 11.04
I also get segfaults when exiting via Q on 2.1.0 (CentOS 6.2 x86_64)
|
|
|
|
-ck (OP)
Legendary
Offline
Activity: 4214
Merit: 1644
Ruu \o/
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 28, 2011, 09:40:36 PM |
|
-------------------------------------------------------------------------------- [P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit GPU 0: 72.5C 4403RPM | 359.9/361.5Mh/s | A:5435 R:3 HW:0 U:4.99/m I:9 GPU 1: 76.5C | 359.8/361.8Mh/s | A:5413 R:10 HW:0 U:4.97/m I:9 GPU 2: 72.5C 3617RPM | 364.6/361.3Mh/s | A:5284 R:7 HW:0 U:4.85/m I:9 GPU 3: 67.5C | 365.7/361.5Mh/s | A:5349 R:5 HW:0 U:4.91/m I:9 GPU 4: 73.0C 3255RPM | 362.8/361.5Mh/s | A:5391 R:7 HW:0 U:4.95/m I:9 GPU 5: 76.0C | 368.0/361.7Mh/s | A:5417 R:10 HW:0 U:4.97/m I:9 --------------------------------------------------------------------------------
The spacing and misalignment problem is still with us, in this instance due to double-digit rejects for a couple of GPUs. But as indicated by the hyphen borders, LOOK AT ALL THAT WASTED SPACE ON THE RIGHT!!11!!1 Some field widths could be increased. My plan is to fix this; might take a few days (due to my schedule, not coding time). If someone else wants to do it, please let me know. Here we go again ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif) The idea was to leave those since they're ever increasing and you'll never be able to guarantee enough column width and alignment.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
os2sam
Legendary
Offline
Activity: 3582
Merit: 1094
Think for yourself
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 28, 2011, 09:42:40 PM |
|
(though q for quitting is broken, I can affirm that)
If your using Windoze that's kind of normal operation for most of us as its a known Windoze bug. There are several older posts mentioning this if you want more details. Sam
|
A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? A: Top-posting. Q: What is the most annoying thing on usenet and in e-mail?
|
|
|
Proofer
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 266
Merit: 36
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 28, 2011, 10:54:28 PM |
|
Here we go again ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif) The idea was to leave those since they're ever increasing and you'll never be able to guarantee enough column width and alignment. If you want guarantees, DeathAndTaxes is your man, or at least his moniker suggests so. Regardless, I offer to replace the current layout... -------------------------------------------------------------------------------- [P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit GPU 0: 71.0C 3482RPM | 371.2/373.1Mh/s | A:18 R:0 HW:0 U:5.05/m I:9 GPU 1: 75.0C | 362.5/373.5Mh/s | A:20 R:0 HW:0 U:5.61/m I:9 GPU 2: 70.5C 3398RPM | 364.2/372.4Mh/s | A:25 R:0 HW:0 U:7.02/m I:9 GPU 3: 65.0C | 371.8/368.9Mh/s | A:15 R:0 HW:0 U:4.21/m I:9 GPU 4: 67.0C 3449RPM | 378.5/370.5Mh/s | A:16 R:0 HW:0 U:4.49/m I:9 GPU 5: 70.0C | 372.4/369.8Mh/s | A:15 R:0 HW:0 U:4.21/m I:9 --------------------------------------------------------------------------------
with this: -------------------------------------------------------------------------------- [P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit GPU 0: 72.5C 4403RPM| 359.9/ 361.5Mh/s|A: 5435 R: 3 H: 0 U: 4.99/m I: 9 GPU 1: 76.5C | 359.8/ 361.8Mh/s|A: 5413 R: 10 H: 0 U: 4.97/m I: 9 GPU 2: 72.5C 3617RPM| 364.6/ 361.3Mh/s|A: 5284 R: 7 H: 0 U: 4.85/m I: 9 GPU 3: 67.5C | 365.7/ 361.5Mh/s|A: 5349 R: 5 H: 0 U: 4.91/m I: 9 GPU 4: 73.0C 3255RPM| 362.8/ 361.5Mh/s|A: 5391 R: 7 H: 0 U: 4.95/m I: 9 GPU 5: 76.0C | 368.0/ 361.7Mh/s|A: 5417 R: 10 H: 0 U: 4.97/m I: 9 --------------------------------------------------------------------------------
where whitespace to the right of any ":" or "|" or "/" is subject to being used for digits as necessary.
|
|
|
|
gnar1ta$
Donator
Hero Member
Offline
Activity: 798
Merit: 500
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 28, 2011, 11:12:47 PM |
|
if not yet done, try: sudo aticonfig --install --adapter=all sudo reboot
Did that after installing fglrx. I know I'm missing something simple. Have you started Xorg? Xorg shows in top. I don't think startx works through ssh???
|
Losing hundreds of Bitcoins with the best scammers in the business - BFL, Avalon, KNC, HashFast.
|
|
|
-ck (OP)
Legendary
Offline
Activity: 4214
Merit: 1644
Ruu \o/
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 28, 2011, 11:16:48 PM |
|
(though q for quitting is broken, I can affirm that)
If your using Windoze that's kind of normal operation for most of us as its a known Windoze bug. There are several older posts mentioning this if you want more details. Sam Looks like people are getting it on linux too now. Anyone want to get a core dump and get a backtrace? (If that's within your capabilities of course). Of course I'd debug it but it doesn't happen here... then again I don't have any GPU mining to test it on right now ![Undecided](https://bitcointalk.org/Smileys/default/undecided.gif)
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
-ck (OP)
Legendary
Offline
Activity: 4214
Merit: 1644
Ruu \o/
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 28, 2011, 11:19:10 PM |
|
Hi Con, It looks like api-example.c, api-example.php, API.java/API.class and miner.php didn't get packaged up in the 2.1.0 source tarball. I see they are there in GIT but the README implies they are included in the main distribution.
You're right, thanks. Naughty Kano... anyway I'll fix it in the git tree.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
ancow
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 28, 2011, 11:23:29 PM |
|
(though q for quitting is broken, I can affirm that)
If your using Windoze that's kind of normal operation for most of us as its a known Windoze bug. There are several older posts mentioning this if you want more details. Sam Looks like people are getting it on linux too now. Anyone want to get a core dump and get a backtrace? (If that's within your capabilities of course). It's in the newer fglrx drivers; details if you make AMD open-source their drivers... ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) > LANG=C gdb cgminer core GNU gdb (GDB) 7.3-debian Copyright (C) 2011 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-linux-gnu". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>... Reading symbols from /home/reini/root/bitcoin/cgminer_build/cgminer...done. [New LWP 14321] [New LWP 14317] [New LWP 14241] [New LWP 14326]
warning: Can't read pathname for load map: Input/output error. [Thread debugging using libthread_db enabled] Core was generated by `cgminer -c /home/reini/.cgminer/bitcoin.conf'. Program terminated with signal 11, Segmentation fault. #0 0x00007f7ef1c09729 in ?? () from /usr/lib/libamdocl64.so Traceback (most recent call last): File "/usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.16-gdb.py", line 59, in <module> from libstdcxx.v6.printers import register_libstdcxx_printers ImportError: No module named libstdcxx.v6.printers (gdb) bt full #0 0x00007f7ef1c09729 in ?? () from /usr/lib/libamdocl64.so No symbol table info available. #1 0x00007f7ef1c09778 in ?? () from /usr/lib/libamdocl64.so No symbol table info available. #2 0x00007f7ef1bff6c1 in ?? () from /usr/lib/libamdocl64.so No symbol table info available. #3 0x00007f7ef1bf6088 in ?? () from /usr/lib/libamdocl64.so No symbol table info available. #4 0x00007f7ef1c005b0 in ?? () from /usr/lib/libamdocl64.so No symbol table info available. #5 0x00007f7ef1c01260 in ?? () from /usr/lib/libamdocl64.so No symbol table info available. #6 0x00007f7ef1c0a3cc in ?? () from /usr/lib/libamdocl64.so No symbol table info available. #7 0x00007f7ef1c084bd in ?? () from /usr/lib/libamdocl64.so No symbol table info available. #8 0x00007f7ef69dab50 in start_thread (arg=<optimized out>) at pthread_create.c:304 __res = <optimized out> pd = 0x7f7eec178700 unwind_buf = {cancel_jmp_buf = {{jmp_buf = {140183103571712, 4430654472375514548, 140737349963280, 140183103572416, 140183284547648, 7, -4359201957654547020, -4359143591589956172}, mask_was_saved = 0}}, priv = {pad = {0x0, 0x0, 0x0, 0x0}, data = {prev = 0x0, cleanup = 0x0, canceltype = 0}}} not_first_call = <optimized out> freesize = <optimized out> __PRETTY_FUNCTION__ = "start_thread" #9 0x00007f7ef5c743bd in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:112 No locals. #10 0x0000000000000000 in ?? () No symbol table info available. (gdb)
|
BTC: 1GAHTMdBN4Yw3PU66sAmUBKSXy2qaq2SF4
|
|
|
-ck (OP)
Legendary
Offline
Activity: 4214
Merit: 1644
Ruu \o/
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 28, 2011, 11:31:05 PM |
|
It's in the newer fglrx drivers; details if you make AMD open-source their drivers... ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) > LANG=C gdb cgminer core GNU gdb (GDB) 7.3-debian Copyright (C) 2011 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-linux-gnu". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>... Reading symbols from /home/reini/root/bitcoin/cgminer_build/cgminer...done. [New LWP 14321] [New LWP 14317] [New LWP 14241] [New LWP 14326]
warning: Can't read pathname for load map: Input/output error. [Thread debugging using libthread_db enabled] Core was generated by `cgminer -c /home/reini/.cgminer/bitcoin.conf'. Program terminated with signal 11, Segmentation fault. #0 0x00007f7ef1c09729 in ?? () from /usr/lib/libamdocl64.so Traceback (most recent call last): File "/usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.16-gdb.py", line 59, in <module> from libstdcxx.v6.printers import register_libstdcxx_printers ImportError: No module named libstdcxx.v6.printers (gdb) bt full #0 0x00007f7ef1c09729 in ?? () from /usr/lib/libamdocl64.so No symbol table info available. #1 0x00007f7ef1c09778 in ?? () from /usr/lib/libamdocl64.so No symbol table info available. #2 0x00007f7ef1bff6c1 in ?? () from /usr/lib/libamdocl64.so No symbol table info available. #3 0x00007f7ef1bf6088 in ?? () from /usr/lib/libamdocl64.so No symbol table info available. #4 0x00007f7ef1c005b0 in ?? () from /usr/lib/libamdocl64.so No symbol table info available. #5 0x00007f7ef1c01260 in ?? () from /usr/lib/libamdocl64.so No symbol table info available. #6 0x00007f7ef1c0a3cc in ?? () from /usr/lib/libamdocl64.so No symbol table info available. #7 0x00007f7ef1c084bd in ?? () from /usr/lib/libamdocl64.so No symbol table info available. #8 0x00007f7ef69dab50 in start_thread (arg=<optimized out>) at pthread_create.c:304 __res = <optimized out> pd = 0x7f7eec178700 unwind_buf = {cancel_jmp_buf = {{jmp_buf = {140183103571712, 4430654472375514548, 140737349963280, 140183103572416, 140183284547648, 7, -4359201957654547020, -4359143591589956172}, mask_was_saved = 0}}, priv = {pad = {0x0, 0x0, 0x0, 0x0}, data = {prev = 0x0, cleanup = 0x0, canceltype = 0}}} not_first_call = <optimized out> freesize = <optimized out> __PRETTY_FUNCTION__ = "start_thread" #9 0x00007f7ef5c743bd in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:112 No locals. #10 0x0000000000000000 in ?? () No symbol table info available. (gdb) Well at least I know it's not my code at fault. Shame though...
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
Proofer
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 266
Merit: 36
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 28, 2011, 11:36:43 PM |
|
Well at least I know it's not my code at fault. Shame though...
Not necessarily implying your code is at fault, but a data point: here, no seg fault with 2.0.8, seg fault with 2.1.0, no driver change. Catalyst 11.6, Ubuntu 11.04.
|
|
|
|
-ck (OP)
Legendary
Offline
Activity: 4214
Merit: 1644
Ruu \o/
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 28, 2011, 11:43:29 PM |
|
How are rejects for everyone now with the new code? They should be the lowest ever.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
DeathAndTaxes
Donator
Legendary
Offline
Activity: 1218
Merit: 1079
Gerald Davis
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 29, 2011, 01:13:13 AM |
|
How are rejects for everyone now with the new code? They should be the lowest ever.
Looks the same for me but I always had low rejects using Bitminter pool & cgminer (<0.1%).
|
|
|
|
kano
Legendary
Offline
Activity: 4578
Merit: 1851
Linux since 1997 RedHat 4
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 29, 2011, 01:26:25 AM |
|
...
where whitespace to the right of any ":" or "|" or "/" is subject to being used for digits as necessary.
What happens if you have 11 GPUs ... (Edit: and who has a GPU that can hash above 999.9?)
|
|
|
|
Proofer
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 266
Merit: 36
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 29, 2011, 01:31:51 AM |
|
...
where whitespace to the right of any ":" or "|" or "/" is subject to being used for digits as necessary.
What happens if you have 11 GPUs ... Good catch... Make that: where whitespace to the right of any "GPU" or ":" or "|" or "/" is subject to being used for digits as necessary.
|
|
|
|
-ck (OP)
Legendary
Offline
Activity: 4214
Merit: 1644
Ruu \o/
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 29, 2011, 01:44:06 AM |
|
How are rejects for everyone now with the new code? They should be the lowest ever.
Looks the same for me but I always had low rejects using Bitminter pool & cgminer (<0.1%). 0.1% sounds good. There will only be a difference in this release if multipool is set up, and more so if you have switched from your primary pool.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
|