|
TechPark
|
|
June 28, 2017, 11:12:54 PM |
|
Just got some spare time to test sgminer on linux I have written my current hashrate and as soon as DAG changes will test again and report, but I doubt that issue is hardware related.
There were several posts pointing out that you do not have to wait for actual DAG you can run a benchmark with different parameters to emulate future DAGs.
|
|
|
|
Joelite
Newbie
Offline
Activity: 10
Merit: 0
|
|
June 28, 2017, 11:16:17 PM |
|
Hello! I updated to the last version, and I'm getting incorrect shares from a card (gpu #5) because I overclock it too much... but with the 8.x version of claymore I was using with the same config, the card was working perfect. It happens to me with all of 9.x version... What could be going wrong? https://i.gyazo.com/0d150ce973e4775b61ca4a0117cd2460.png
|
|
|
|
operater
Newbie
Offline
Activity: 19
Merit: 0
|
|
June 28, 2017, 11:18:18 PM |
|
Hi All, Please forgive my ignorance but I just got a crazy idea. Would it be possible to dual mine ETH and EXPANSE or UBIQ given that they are all based on the same dagger hashimoto ethash ??
|
|
|
|
TechPark
|
|
June 28, 2017, 11:26:40 PM |
|
Hello all,
I've been having some issues running Claymore's miner lately. I've done everything possible that I know how to do, but I'm still having issues. Here's a list of things I've done: -Clean uninstall drivers and install 15.12 from both Softpedia as well as AMD previous drivers page -Using an older version of Claymore's miner (downloaded from MEGA) -Setting Windows "swap"/virtual memory to 16GB -Updating all device drivers -Swapping motherboards/CPUs -Overwriting Windows 10 with Windows 7
Here are the specs of the machine I'm most currently running: -5x XFX R7 370's (2GB) ----- I'm mining Ubiq, not Ethereum, so 2GB cards still work! -5x powered risers, all of which I know are working as they were tested in a working environment -AsRock Extreme4 motherboard (the one molex plug IS connected despite powered risers, was necessary to boot) -Intel i3-4130 w/ stock cooling -8GB Ram -850w power supply : Kill-A-Watt reads 750w from the wall when it's running at full speed (it did work for a few hours the first time then suddenly disconnected and I've been having issues ever since) -Edimax Wireless Adapter (150mbps) -Windows 7 Professional (I've tried with Windows 10 for days and finally decided that it might be the OS, but I'm still have the issue)
Misc info: -I use Chrome Remote Desktop to remote into the device. -Windows updates are disabled -Radeon automatic updates are disabled -Only things installed are device drivers, Google Chrome, and Claymore's miner
WITH ALL OF THAT SAID, HERE IS THE ISSUE I'M HAVING: After much testing and deducing, the problem that I can replicate best is the fact that when the miner is started, the computer crashes in one way or another. Every fan still spins, and you probably wouldn't even know that it went down unless you actually saw the screen go from blue to black (switch from on to off). This confused me for the longest time since I was mostly using the device headlessly until I brought a monitor in.
I've also had it where the miner starts and then all of the sudden all of the fans kick on to 100%. It scared me to all hell the first time I heard it. Thought I fried something, but everything seems to run "fine" (besides the fact that it's not mining, of course). After a reboot every device is still there.
The only other bit of information I can seem to scrap out of this is that it crashes when the DAG epochs are created. That's the last thing I see before the screen goes black and I have to hit the reset button.
Thank you in advance for any replies, I've been working on this for days and all of these graphics cards are still just sitting.
- I had the same motherboard and you do not have to have Molex plugged in. Just read the message during the fist boot, press the required key and it will not come back. With powered risers you do not have to use MB Molex. - If I were you I would try to run cards one by one, if successful then add one card and try again and so on until you get all 5 running. Keep 1 card in a slot > do a DDU first > reinstall the driver > run miner > shut down > use riser > run miner > shutdown > add another card > DDU > driver > riser and so on... - I personally believe that your issue is related to power. If miner works with 2-3 cards but not with 5 this is the indicator.
|
|
|
|
TechPark
|
|
June 28, 2017, 11:30:34 PM |
|
Hi All, Please forgive my ignorance but I just got a crazy idea. Would it be possible to dual mine ETH and EXPANSE or UBIQ given that they are all based on the same dagger hashimoto ethash ?? Not possible without losing hashing power. Dual mining is possible by utilizing different resources at the same time, not the same resource. So algos must be different and very specific.
|
|
|
|
CoinConsole
Newbie
Offline
Activity: 11
Merit: 0
|
|
June 28, 2017, 11:35:13 PM |
|
Hello all,
I've been having some issues running Claymore's miner lately. I've done everything possible that I know how to do, but I'm still having issues. Here's a list of things I've done: -Clean uninstall drivers and install 15.12 from both Softpedia as well as AMD previous drivers page -Using an older version of Claymore's miner (downloaded from MEGA) -Setting Windows "swap"/virtual memory to 16GB -Updating all device drivers -Swapping motherboards/CPUs -Overwriting Windows 10 with Windows 7
Here are the specs of the machine I'm most currently running: -5x XFX R7 370's (2GB) ----- I'm mining Ubiq, not Ethereum, so 2GB cards still work! -5x powered risers, all of which I know are working as they were tested in a working environment -AsRock Extreme4 motherboard (the one molex plug IS connected despite powered risers, was necessary to boot) -Intel i3-4130 w/ stock cooling -8GB Ram -850w power supply : Kill-A-Watt reads 750w from the wall when it's running at full speed (it did work for a few hours the first time then suddenly disconnected and I've been having issues ever since) -Edimax Wireless Adapter (150mbps) -Windows 7 Professional (I've tried with Windows 10 for days and finally decided that it might be the OS, but I'm still have the issue)
Misc info: -I use Chrome Remote Desktop to remote into the device. -Windows updates are disabled -Radeon automatic updates are disabled -Only things installed are device drivers, Google Chrome, and Claymore's miner
WITH ALL OF THAT SAID, HERE IS THE ISSUE I'M HAVING: After much testing and deducing, the problem that I can replicate best is the fact that when the miner is started, the computer crashes in one way or another. Every fan still spins, and you probably wouldn't even know that it went down unless you actually saw the screen go from blue to black (switch from on to off). This confused me for the longest time since I was mostly using the device headlessly until I brought a monitor in.
I've also had it where the miner starts and then all of the sudden all of the fans kick on to 100%. It scared me to all hell the first time I heard it. Thought I fried something, but everything seems to run "fine" (besides the fact that it's not mining, of course). After a reboot every device is still there.
The only other bit of information I can seem to scrap out of this is that it crashes when the DAG epochs are created. That's the last thing I see before the screen goes black and I have to hit the reset button.
Thank you in advance for any replies, I've been working on this for days and all of these graphics cards are still just sitting.
- I had the same motherboard and you do not have to have Molex plugged in. Just read the message during the fist boot, press the required key and it will not come back. With powered risers you do not have to use MB Molex. - If I were you I would try to run cards one by one, if successful then add one card and try again and so on until you get all 5 running. Keep 1 card in a slot > do a DDU first > reinstall the driver > run miner > shut down > use riser > run miner > shutdown > add another card > DDU > driver > riser and so on... - I personally believe that your issue is related to power. If miner works with 2-3 cards but not with 5 this is the indicator. It is not power related - it does the same thing with 5 cards as it does with 1/2/3/4. It doesn't just shut off like it would if it reaches max power; the screen just goes blank and nothing else really happens. I'll go ahead and try your method of 1 card at a time, though.
|
|
|
|
reb0rn21
Legendary
Offline
Activity: 1901
Merit: 1024
|
|
June 28, 2017, 11:55:10 PM |
|
Do any of you ppl think IF DAG INCREASE and memory usage is more (now way over 2GB) your OC at limit (for a ~1GB usage) will break and start to BSOD, make illegal shares??
is it so hard to reset GPU at default and see there is not problems then and use brain
|
|
|
|
gateway
|
|
June 29, 2017, 12:22:56 AM |
|
Ok I just got a hold of some Nvidia GTX Titan X cards with 12 gigs of memory on them. I'm testing out the latest claymore miner w/o any over clocking on the nvidia cards.. To my surprise I'm only seeing about 12 Mh/s per card.. this seems odd for such a high end card. my config is below.. GPU_FORCE_64BIT_PTR 0 GPU_MAX_HEAP_SIZE 100 GPU_USE_SYNC_OBJECTS 1 GPU_MAX_ALLOC_PERCENT 100 GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -r 1 -dcri 20 -tt 69 -eres 0 -epool us2.ethermine.org:4444 -ewal xxxxxxxx.rig3 -epsw x -allpools 1 -mode 1 I manually build AMD rigs so the nvidia card tweaking is new to me. Any Nvidia users on here maybe give me some pointers as to what might be wrong or should I look for a cuda only miner for ETH ?
|
|
|
|
ciripel1289
Newbie
Offline
Activity: 50
Merit: 0
|
|
June 29, 2017, 12:28:21 AM |
|
My question is about the Dpools.txt back pools file. I want to mine UBQ as main coin from a main pool and i have also a second pool as backup. this is set up. I want to mine sia as main second coin from a pool. If that pool is down i want to mine decred instead from the backup pool. I can't make the dpools.txt file to work like this.
Normally i can set up the -dcri command in the config.txt file and also the -dcoin command. But i want to set up 2 pools as a backup. First pool to be a Decred pool and the second one to be a Siacoin pool. Can i make a file dpools.txt like this?
POOL: stratum+tcp://sia-eu1.nanopool.org:7777, WALLET: <ADRESS>/<USER>/<mail>, DCOIN: sia, DCRI: 17 POOL: stratum+tcp://dcr.suprnova.cc:3252, WALLET: user.1, PSW: 1, DCRI: 28
Seems to not be accepted the DCOIN and DCRI command in the dpools.txt. So due to this i guess it is only possible to mine only one time of second coin and to set up 2 pools for the same coin. Is this correct or there is another workaround?
Anyone can confirm this?
|
|
|
|
SwoleSniper
Newbie
Offline
Activity: 4
Merit: 0
|
|
June 29, 2017, 01:04:25 AM |
|
When dual mining on my XFX 295x2, periodically my hashrate is very poor.
I'll go from hashing ~31mhash eth ~900mhash decred (per gpu) to ~8mhash eth ~200mhash decred and then return. GPU-Z unfortunately doesn't show me the vrm temps on my 295 so I'm not sure what they are hitting. In single mining mode, I can actually push these things to do ~33mhash and they never seem to stray from that number.
I was originally using the recommended driver which exhibited the problem. I have moved on to the 17.xx drivers as for some magical reason they have allowed me to reduce the power target on both my 295x2 and 290x and sustain slightly higher clocks.
I see this is a known issue, which 9.6 didn't resolve sadly.
Does anyone have a 295x2 that is not having this problem? Should I try a different bios that anyone is aware of? The 290x (reference) in the same chassis (on a different psu) does not ever run into this problem, but it's running a customized bios based on the 390x aside from the other obvious differences between the cards.
I'm having a very similar issue with an rx 480 where I get random jumps in mh/s, but single mining is fine.
|
|
|
|
correia.tp
Newbie
Offline
Activity: 4
Merit: 0
|
|
June 29, 2017, 01:14:34 AM |
|
I need help. https://i.imgur.com/Fx8J2kG.pngAfter this message: "Miner thread hangs, neet to restart miner!" Claymore only restarts after I hit a key, the only solution that I found on the internet, was a macro that press enter from time to time which is not ideal. - Windows 10 fully updated - Claymore dual mining v9.6(ethereum-only mining mode), same happens with v9.5 - Nvidia driver 382.53 - Firewall and antivirus are disabled - 2 EVGA 1060 6GB SC (06G-P4-6163-KR) without riser, with a very small OC (+450MHz on memory) - Virtual memory paging file is set bigger than 16GB Should I install the driver version 368.81 of it's ok to use the latest version? What should I do? Thanks in advance. there have been hundreds of people with the same symptoms asking the same questions in this thread. Most of frequently asked questions had been answered on the first page of this thread. Have you tried to go there to read? I was trying to find the solution by searching the error message, I didn't find anything useful. Now seems that I found the solution there, I just need to wait some time to see. Thanks.
|
|
|
|
Tjiuz
Newbie
Offline
Activity: 30
Merit: 0
|
|
June 29, 2017, 02:23:39 AM |
|
how to show GPU Temp and fan in 9.6 ??
|
|
|
|
goccat
Newbie
Offline
Activity: 37
Merit: 0
|
|
June 29, 2017, 02:48:20 AM |
|
SNIP I'm having a very similar issue with an rx 480 where I get random jumps in mh/s, but single mining is fine. I have been playing with this quite a lot today. I'm pretty sure my 295 is hitting a thermal limit on its VRM. I changed to -dcri 18/reduced mem overclock by 100mhz and the throttling occurs much less frequently. I'm going to have to do a very slight mod to the card by rerouting the fan cable so it is controlled by a different source so I can get my clocks back. Check your GPU-Z and see what your VRMs look like. I wish I could use it to see them on my 295.
|
|
|
|
fcaldas
Newbie
Offline
Activity: 53
Merit: 0
|
|
June 29, 2017, 03:32:10 AM |
|
Anyone having this issue? ETH: 06/29/17-13:28:43 - New job from eth-asia1.nanopool.org:9999 ETH - Total Speed: 42.945 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:02 ETH: GPU0 21.490 Mh/s, GPU1 21.455 Mh/s LBC - Total Speed: 29.524 Mh/s, Total Shares: 1, Rejected: 0 LBC: GPU0 14.774 Mh/s, GPU1 14.750 Mh/s GPU0 t=60C fan=31%, GPU1 t=59C fan=30% GPU 1, GpuMiner cu_k02 failed 4, unspecified launch failure GPU 1, GpuMiner kx failed 1 GPU 1, GpuMiner cu_k02 failed 4, unspecified launch failure GPU 1 failed GPU 1, GpuMiner kx failed 1 GPU 1 failed GPU 0, GpuMiner cu_k02 failed 4, unspecified launch failure GPU 0, GpuMiner kx failed 1 GPU 0 failed GPU 0, GpuMiner cu_k02 failed 4, unspecified launch failure GPU 0, GpuMiner kx failed 1 GPU 0 failed LBC: 06/29/17-13:29:15 - New job from lbry.suprnova.cc:6256 GPU0 t=49C fan=0%, GPU1 t=49C fan=0% WATCHDOG: GPU error, you need to restart miner Restarting OK, exit... It happens about twice every hour. It restarts and resumes, but it's happening too much. My GTX1060 is overclocked at 600memory and 100TPD and 0 CPU. Thanks
|
|
|
|
TechPark
|
|
June 29, 2017, 03:56:48 AM |
|
Anyone having this issue? ETH: 06/29/17-13:28:43 - New job from eth-asia1.nanopool.org:9999 ETH - Total Speed: 42.945 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:02 ETH: GPU0 21.490 Mh/s, GPU1 21.455 Mh/s LBC - Total Speed: 29.524 Mh/s, Total Shares: 1, Rejected: 0 LBC: GPU0 14.774 Mh/s, GPU1 14.750 Mh/s GPU0 t=60C fan=31%, GPU1 t=59C fan=30% GPU 1, GpuMiner cu_k02 failed 4, unspecified launch failure GPU 1, GpuMiner kx failed 1 GPU 1, GpuMiner cu_k02 failed 4, unspecified launch failure GPU 1 failed GPU 1, GpuMiner kx failed 1 GPU 1 failed GPU 0, GpuMiner cu_k02 failed 4, unspecified launch failure GPU 0, GpuMiner kx failed 1 GPU 0 failed GPU 0, GpuMiner cu_k02 failed 4, unspecified launch failure GPU 0, GpuMiner kx failed 1 GPU 0 failed LBC: 06/29/17-13:29:15 - New job from lbry.suprnova.cc:6256 GPU0 t=49C fan=0%, GPU1 t=49C fan=0% WATCHDOG: GPU error, you need to restart miner Restarting OK, exit... It happens about twice every hour. It restarts and resumes, but it's happening too much. My GTX1060 is overclocked at 600memory and 100TPD and 0 CPU. Thanks https://www.google.com.au/search?q=WATCHDOG%3A+GPU+error%2C+you+need+to+restart+miner&rlz=1C1CHBF_enAU691AU691&oq=WATCHDOG%3A+GPU+error%2C+you+need+to+restart+miner&aqs=chrome..69i57j69i58&sourceid=chrome&ie=UTF-8
|
|
|
|
crypt0c0iner
Newbie
Offline
Activity: 2
Merit: 0
|
|
June 29, 2017, 04:03:31 AM |
|
I'm sorry for posting what is surely been answered but I have a new account and flood control wont allow me to search for all the information I need.
I'm not new to crypto but new to mining. I bought an off the shelf "gaming computer" from Best Buy.
I have a new PC with following specs:
MSI 350M Bazooka Motherboard AMD Ryzen 5 1400 Processor GeIL EVO POTENZA 8GB Memory AMD Radeon RX 580 GPU Win 10
I have Claymore's 9.6 running with the following config
-epool us1.ethermine.org:4444 -ewal ADDRESSHERE -epsw x -dpool stratum+tcp://yiimp.ccminer.org:4252 -dwal ADDRESSHERE -dpsw x -esm 1 -mode 0 -tt 80 -ttli 85 -tstop 90 -asm 1 -etha 0 -dcri 32 -ethi 8
I chose Claymore's because it seemed to have the more robust community and following and because it was pretty simple to setup but Im not sure its the best route.
I am getting an average of about 22 Mh\s for ETH and 700 Mh\s for DCRED
I have some n00b questions and a request for any advice.
What happens to my shares when I have to restart my miner? Are they credited to my address or did I lose all progress between payouts?
Can I run more than one PC with multiple miners to the same address?
Should I scrap all of this and try a different miner? Is this the best I can do with this rig as is?
Would a BIOS upgrade or overclocking improve things or is this it?
|
|
|
|
TechPark
|
|
June 29, 2017, 05:01:01 AM |
|
I'm sorry for posting what is surely been answered but I have a new account and flood control wont allow me to search for all the information I need.
I'm not new to crypto but new to mining. I bought an off the shelf "gaming computer" from Best Buy.
I have a new PC with following specs:
MSI 350M Bazooka Motherboard AMD Ryzen 5 1400 Processor GeIL EVO POTENZA 8GB Memory AMD Radeon RX 580 GPU Win 10
I have Claymore's 9.6 running with the following config
-epool us1.ethermine.org:4444 -ewal ADDRESSHERE -epsw x -dpool stratum+tcp://yiimp.ccminer.org:4252 -dwal ADDRESSHERE -dpsw x -esm 1 -mode 0 -tt 80 -ttli 85 -tstop 90 -asm 1 -etha 0 -dcri 32 -ethi 8
I chose Claymore's because it seemed to have the more robust community and following and because it was pretty simple to setup but Im not sure its the best route.
I am getting an average of about 22 Mh\s for ETH and 700 Mh\s for DCRED
I have some n00b questions and a request for any advice.
What happens to my shares when I have to restart my miner? Are they credited to my address or did I lose all progress between payouts?
Can I run more than one PC with multiple miners to the same address?
Should I scrap all of this and try a different miner? Is this the best I can do with this rig as is?
Would a BIOS upgrade or overclocking improve things or is this it?
What happens to my shares when I have to restart my miner? Nothing. Once mined shares are submitted almost instantly and are accumulated on your account on the pool. Are they credited to my address or did I lose all progress between payouts? They are not credited to your Personal Wallet Address but credited to your Pool Wallet Address. Can I run more than one PC with multiple miners to the same address? Yes Should I scrap all of this and try a different miner? Up to you. IMHO: its the best miner available. Is this the best I can do with this rig as is? No. Would a BIOS upgrade or overclocking improve things or is this it? Yes. Modifying BIOS memory timings will improve hashing speed up to 28-29 Mhs and downvolting will improve power consumption.
|
|
|
|
TechPark
|
|
June 29, 2017, 05:19:35 AM |
|
Hey Claymore, first of all thank you for making your awesome client! I just released Vega but it is not working with your miner currently. Can you please add support for Vega? I can't wait to see the hashrates we can get. Let me know if you need anything. LS Dr Lisa Su, what made you start mining just now? Could you please be so kind and send samples to Claymore BEFORE the official release of new GPUs!
|
|
|
|
laik2
|
|
June 29, 2017, 06:04:45 AM |
|
Just got some spare time to test sgminer on linux I have written my current hashrate and as soon as DAG changes will test again and report, but I doubt that issue is hardware related.
Just mine ETC which is on a higher epoch and report the results. Good idea, 2 epochs ahead hashrate dropped too, so its not only claymore issue, but as I said, there are already private kernels that are affected too but slowdown is much smaller.
|
|
|
|
|