[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[Maebog]

I manage to make p106 OC and work normal like on window. on window claymore run 8 gpu just fine, but smos only detect 7 out of 8 gpu. I already try to format the usb and flash the program again but it still didn't work. Can anyone help?  

I've got the same problem. Only 11 of 12 cards are recognized. Would love some help from the mining gurus

I manage make 8 gpu work now but the display monitor hook to the rig alway froze up before claymore start hashing. I can only view through the console on the web. I update motherboard bios, enable vd-t and some how the last gpu just pop up.

Great to hear you got it working! Can I ask which motherboard you're using? Also, what's vd-t? Is it a bios option?

the motherboard I used was ASUS H270 PLUS, vd-t or vt-d i can't remeber the exact name but it is in the bios option it usually above enable 4g decoding.

That's interesting. I'm using a TB250-BTC Pro. Odd that we would be having similar problems on different boards. I'll see what I can pull off. Thanks a ton for the information!

[Maebog]

I manage to make p106 OC and work normal like on window. on window claymore run 8 gpu just fine, but smos only detect 7 out of 8 gpu. I already try to format the usb and flash the program again but it still didn't work. Can anyone help? 

I've got the same problem. Only 11 of 12 cards are recognized. Would love some help from the mining gurus

I manage make 8 gpu work now but the display monitor hook to the rig alway froze up before claymore start hashing. I can only view through the console on the web. I update motherboard bios, enable vd-t and some how the last gpu just pop up.

Great to hear you got it working! Can I ask which motherboard you're using? Also, what's vd-t? Is it a bios option?

the motherboard I used was ASUS H270 PLUS, vd-t or vt-d i can't remeber the exact name but it is in the bios option it usually above enable 4g decoding.

That's interesting. I'm using a TB250-BTC Pro. Odd that we would be having similar problems on different boards. I'll see what I can pull off. Thanks a ton for the information!

The hashrate go up and down very crazy too. Sometime it 25mhs per gpu, other time it only 20

Yeah, my reported hashrate is staying the same but actual hashrate is fluctuating much more than it did on other 1060 cards.

[ne0x86]

Dag raised again and I loss 0.5mh each card.

F*cccck

[RfBTC]

Mining with Claymore and get full HDD (128GB SSD)  in half hour.
After checking find /var/log/syslog and kern.log  grown up to 52GB each.
System write this 4 messages about 4-5 thousands per second ! 

Code:

Jul  9 23:58:37 test-rig kernel: [ 1399.017519] VM fault (0x01, vmid 6) at page 135290427, read from 'TC3' (0x54433300) (196)
Jul  9 23:58:37 test-rig kernel: [ 1399.017554] amdgpu 0000:04:00.0: GPU fault detected: 147 0x01c84801
Jul  9 23:58:37 test-rig kernel: [ 1399.017557] amdgpu 0000:04:00.0:   VM_CONTEXT1_PROTECTION_FAULT_ADDR   0x08105E39
Jul  9 23:58:37 test-rig kernel: [ 1399.017559] amdgpu 0000:04:00.0:   VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C048001

Jul  9 23:58:37 test-rig kernel: [ 1399.017561] VM fault (0x01, vmid 6) at page 135290425, read from 'TC4' (0x54433400) (72)
Jul  9 23:58:37 test-rig kernel: [ 1399.017567] amdgpu 0000:01:00.0: GPU fault detected: 147 0x01f08801
Jul  9 23:58:37 test-rig kernel: [ 1399.017569] amdgpu 0000:01:00.0:   VM_CONTEXT1_PROTECTION_FAULT_ADDR   0x08105E3E
Jul  9 23:58:37 test-rig kernel: [ 1399.017570] amdgpu 0000:01:00.0:   VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C088001

Jul  9 23:58:37 test-rig kernel: [ 1399.017572] VM fault (0x01, vmid 6) at page 135290430, read from 'TC6' (0x54433600) (136)
Jul  9 23:58:37 test-rig kernel: [ 1399.017607] amdgpu 0000:04:00.0: GPU fault detected: 147 0x01e84801
Jul  9 23:58:37 test-rig kernel: [ 1399.017610] amdgpu 0000:04:00.0:   VM_CONTEXT1_PROTECTION_FAULT_ADDR   0x08105E3D
Jul  9 23:58:37 test-rig kernel: [ 1399.017612] amdgpu 0000:04:00.0:   VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C048001

Despite this mine worked properly 24.3 MH/s on each card until the disk is full
Someone also stumbled upon a similar problem?


System:
Lubuntu 16.04  with amdgpu-pro_16.30.3

5x RX 480 8GB ref model
Asrock FM2A88X + BTC

Hi, i have the same problem in my new project : http://simplemining.net/
Anyway it doesnt bother mining and about logs you can turn then off:
as root execute this command and you will have no longer such problem systemctl disable rsyslog.service
then delete big file logs from /var/log/ adn reboot system, then it will work fine.
If you want i will release my http://simplemining.net/ Operating System which will have this fix and many more + feature updates.
If you want make donation BTC: 1ERRVbvV23h51ScH73nQr6TDmaieKNuuVD

Can someone please clarify what Tytanick means here? Is this only for independent Linux users and not Simplemining users?

I am using Simplemining.net and I get these error messages with four out of six RX480s.

Fixes I have tried:
I have the -dbg -1 code in the config text in the global options window.
I have tried each card with risers that I know are stable because they work with two of my cards.
I have tried various versions of drivers and kernels but found no difference with these errors.

I still am thinking that it is a driver/kernel issue but I have run out of options that I know to try.

Please help!

Only Tytanick could think suppressing an actual fairly serious warning is a "feature."

It's a high memclk and/or very tight VBIOS GDDR5 timings. It's causing memory errors.

My memory clock on Simpleminer is set at stock: 2000MHz (8000Mhz GDDR5). So should I learn how to decode the timing values from the HEX code? Or can I just alter the timings in Simplemining?

Have you flashed a diff VBIOS? If not, then Tytanick is probably using AMDGPU firmware and/or a kernel that is older than Jesus.

Damn it. The BIOS page for my card is offline atm. Anything else while I wait (perhaps for quite some time)? I know there was the other well known atikmdag-patcher-1.4.5 which was a kernel issue, but this wouldn't even install without crashes on my system, which no other driver has. Are there any other patches out there?

I got   GPU fault detected: 147    error also  at past,  an i fixed it  increasing  Powerstage variable setting it a bit higher

[thefixxxer]

Monero has passed ETH in mining profitablity, can you add the updated claymore monero miner asap PLEEEEASE!     thank you

+++

use the sgminer-gm-NH-v5.5.5

no dev fee and failover pool feature too

I'll try it out, thank you!

[prdn]

still no news for amd dag fix ? =(

[ManeBjorn]

You need to use the sgminer-gm version as the Claymore version does not support RX cards. There are not many linux XMR clients out there it seems.

Anyone mining XMR on SimpleOS? I'm trying to get "claymore-xmr-v9.1" to work but always get an error message "GPU faluts". What miner do I have to use and what is the correct command line? My GPUs are RX480 and RX570. Thankss in advance.

[davemanet]

all of my servers are no longer connecting to SMOS and showing 0 h/s.  anyone else having this problem?

[hawkfish007]

all of my servers are no longer connecting to SMOS and showing 0 h/s.  anyone else having this problem?

Mine are connected but I am having another issue. New smos image is taking forever to update even with fast USB 3.0 drive, it took over 12 hours to update. Tytanik, is there an issue with your server?

[marimach77]

still no news for amd dag fix ? =(

Nope 

[ne0x86]

Someone else have a hasrate drop by the dag raising?

[yatta]

Anyone has problem flasing NV image? I'm using etcher.io tool and after flashing Windows does not recognize drive.

[Salva1991]

Hi everyone, i have a problem with my rigs....I have 2 rigs and every hour restarted because a rejected share...

rx570 x6
rx580 x6
rx480 x4

I currently have an unstable internet connection. Can this be the problem?

Thank you all

[jackbox]

Anyone has problem flasing NV image? I'm using etcher.io tool and after flashing Windows does not recognize drive.

It does not recognize the drive because it is an linux style partition. But if you eject it and put it back in the computer there is a windows readable partition with only the config.txt file. If it will not show on the computer you burned the image try it on another computer and it will be there. This happened to me.

[bashru]

new NV image with patch does work, but now SMOS sees only 5 cards out of 6.
i have this problem on each 1060 rig(H81 btc r2). sometimes it fixes after few reboots

[marimach77]

Someone else have a hasrate drop by the dag raising?

Yes, me. SMOS - 109MH/s vs Windows 10 - 120MH/s (4x RX580). I'm sure @tytanic will update Linux AMD drivers with fixed DAG issue as soon as AMD released such of drivers. So, please do not blame @tytanic, it's not his fault.

[tytanick]

Someone else have a hasrate drop by the dag raising?

Yes, me. SMOS - 109MH/s vs Windows 10 - 120MH/s (4x RX580). I'm sure @tytanic will update Linux AMD drivers with fixed DAG issue as soon as AMD released such of drivers.

I will as soon as i will know that amd released it

[DebitMe]

Can anyone help me with this mining issue?  I bought a 4 GPU rig from a member on this forum and for the life of me cannot get the thing to run for more than a couple of hours at a time.  I have tried each GPU individually, and every time it ends up just giving me this error after a few hours.
http://imgur.com/a/asI2J
The details of the rig are here...
https://bitcointalk.org/index.php?topic=2013051.0
and the only difference is that I used my own version of simpleminer on a USB drive.

I am running Core Mhz at 1162 and Memory Mhz at 1750 with a powerstage of 3 (I believe that is stock settings for the 580?)

Any help would be appreciated.

Thanks

Tytanik, do you know whats going on here?

[tytanick]

Tytanik, do you know whats going on here?

Not really but please upgrade your motherboard to newest. then plug out your motherboard batter and power from PSU. Wait 10 minutes. and then sec in bios:
1) Make sure you are running the latest BIOS!
2) Set device to boot from USB/pendrive
3) Upgrade bios to newest (important !)
4) Enable 4G encode
5) Set PCIe support to Auto
6) Enable onboard graphics to default (PEG - > IDG)
7) Plug your monitor into the ONBOARD graphics

Also this can be also bad riser, bad gpu, and many other things. Try connecting less gpus and see whats happening.

[DebitMe]

Tytanik, do you know whats going on here?

Not really but please upgrade your motherboard to newest. then plug out your motherboard batter and power from PSU. Wait 10 minutes. and then sec in bios:
1) Make sure you are running the latest BIOS!
2) Set device to boot from USB/pendrive
3) Upgrade bios to newest (important !)
4) Enable 4G encode
5) Set PCIe support to Auto
6) Enable onboard graphics to default (PEG - > IDG)
7) Plug your monitor into the ONBOARD graphics

Also this can be also bad riser, bad gpu, and many other things. Try connecting less gpus and see whats happening.

Ok, I will work through those things this weekend.  Thank you for the advice.

So that error message is based on my equipment and nothing going wrong with the actual mining?
When you say "please upgrade your motherboard to newest".  Do you mean BIOS or actually using a different motherboard?

Thanks again!