[ mining os ] nvoc

[thaelin]

@marty
     Just checked to make sure and my Z270 is running 5 cards at the moment. Only 1 and last 1X slots are empty and running great.  Sounds like you have a bad MB to me.
thay

[HyPyk]

Hmm... using a ASUS Prime Z270-P with nvOC;

both 16x slots work fine
PCIE1x_1 and PCIE1x_2 work fine
but PCIE1x_3 and PCIE1x_4 will not detect a card...

I've swapped cards from 1 and 2 to 3 and 4 and at all times, 1 and 2 work while 3 and 4 are not detected.

Is it some motherboard setting perhaps?

try nvOC beta or windows, you will see if it is software or hardware problem and start troubleshooting from there

[monck]

Code:

 
Software info: 
Report ver    :  v0019-2.0.002 
nvOC (1bash)  :  nvOC v0019-2.0 - Community Release 
nvOC (3main)  :  nvOC v0019-2.0 - Community Release   
1bash ver     :  v0019-2.0.002 
3main ver     :  v0019-2.0.004                   
5watchdog ver :  v0019-2.0.011    
6tempcontrol v:  v0019-2.0.003    
wtm switch ver:  v0019-2.0.006   
Kernel        :  4.4.0-97-generic 
OS            :  Ubuntu 16.04.3 LTS 
System        :  (gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.4) 
nvidia driver :  387.12 
 
Hardware info: 
Motherboard   :  ASRock H110 Pro BTC+           
BIOS ver.     :  P1.10 06/20/2017 
CPU Model     :  Celeron(R) CPU G3900 @ 2.80GHz 
CPU Cores     :  2 (Cores + Threads) 
Mem Total     :         8130264 kB 
Mem Free      :         5050284 kB 
Swap Total    :               0 kB 
Swap Free     :               0 kB 
Ethernet      :  Intel I219-V (rev 31)

HDD and Partion info:
NAME    SIZE FSTYPE TYPE ROTA HOTPLUG TRAN VENDOR   MODEL             REV MOUNTPOINT
sda    29.9G        disk    1       1 usb  Lexar    USB Flash Drive  PMAP 
├─sda1    9M vfat   part    1       1                                     /media/m1/12D3-A8691
└─sda2 13.7G ext4   part    1       1                                     /

VGA info:
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
02:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
03:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
04:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
08:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
09:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
0c:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
0d:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
0e:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)

1bash settings:
1bash version .............: v0019-2.0.002
LOCAL or REMOTE ...........: LOCAL
TEAMVIEWER started ........: YES
SSH daemon started ........: YES
SLOW_USB_KEY_MODE .........: NO
SRR .......................: NO
Watchdog ..................: YES

Temp Control ..............: YES
TARGET_TEMP ...............: 67
__FAN_ADJUST ..............: 5
POWER_ADJUST ..............: 5
ALLOWED_TEMP_DIFF .........: 2
RESTORE_POWER_LIMIT .......: 90
MINIMAL_FAN_SPEED .........: 40

CLEAR_LOGS_ON_BOOT ........: NO
AUTO_UPDATE ...............: BETA
AUTO_REBOOT ...............: NO
_Parallax_MODE (upPaste)...: NO

TELEGRAM_MESSAGES .: NO
TELEGRAM_ALERTS .: YES
TELEGRAM_TYPE .............: papampi
TELEGRAM_TIMEOUT_IN_MINUTES: 60
TELEGRAM_CHATID ...........: CHATID_NOT_SHOWN
TELEGRAM_APIKEY ...........: APIKEY_NOT_SHOWN

P106_100_FULL_HEADLESS_MODE: NO
GPUPowerMizerMode_Adjust...: NO
POWERLIMIT (global) .......: YES
POWERLIMIT_WATTS ..........: 130
CORE_OVERCLOCK (global)....: 200
MEMORY_OVERCLOCK (global) .: 700
MANUAL_FAN ................: NO
ALGO_SPECIFIC_OC ..........: NO

GLOBAL_WORKERNAME .........: NO
AUTO_WORKERNAME ...........: HOST
WORKERNAME ................: 241
plusCPU ...................: NO

ZM_or_EWBF ................: EWBF
EWBF_VERSION ..............: 3_4
EWBF_PERCENT ..............: 0

COIN ......................: ZEC
ZEC_WORKER ................: 101
ZEC_ADDRESS ...............: acs...
ZEC_POOL ..................: europe.equihash-hub.miningpoolhub.com
ZEC_PORT ..................: 20570

[\code]

I am testing 19.2 but have the problem that the mining process will be terminated, watchdog process too.
Mostly after the miner was switching based on Algo change. Checked also on a second rig with only one 1070TI.
Thanks for your work - any ideas?

[quasarix]

Stupid question

Can you use this on amd RX cards ?

[joshuajones02]

Stupid question

Can you use this on amd RX cards ?

theres another thread/version for AMD cards

Check out rxOC here

Code:

https://bitcointalk.org/index.php?topic=1984302.0

[martyroz]

@marty
     Just checked to make sure and my Z270 is running 5 cards at the moment. Only 1 and last 1X slots are empty and running great.  Sounds like you have a bad MB to me.
thay

Silly me didn't have 4G Decoding = enabled

It's working now!

[papampi]

Code:

 
Software info: 
Report ver    :  v0019-2.0.002 
nvOC (1bash)  :  nvOC v0019-2.0 - Community Release 
nvOC (3main)  :  nvOC v0019-2.0 - Community Release   
1bash ver     :  v0019-2.0.002 
3main ver     :  v0019-2.0.004                   
5watchdog ver :  v0019-2.0.011    
6tempcontrol v:  v0019-2.0.003    
wtm switch ver:  v0019-2.0.006   
Kernel        :  4.4.0-97-generic 
OS            :  Ubuntu 16.04.3 LTS 
System        :  (gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.4) 
nvidia driver :  387.12 
 
Hardware info: 
Motherboard   :  ASRock H110 Pro BTC+           
BIOS ver.     :  P1.10 06/20/2017 
CPU Model     :  Celeron(R) CPU G3900 @ 2.80GHz 
CPU Cores     :  2 (Cores + Threads) 
Mem Total     :         8130264 kB 
Mem Free      :         5050284 kB 
Swap Total    :               0 kB 
Swap Free     :               0 kB 
Ethernet      :  Intel I219-V (rev 31)

HDD and Partion info:
NAME    SIZE FSTYPE TYPE ROTA HOTPLUG TRAN VENDOR   MODEL             REV MOUNTPOINT
sda    29.9G        disk    1       1 usb  Lexar    USB Flash Drive  PMAP 
├─sda1    9M vfat   part    1       1                                     /media/m1/12D3-A8691
└─sda2 13.7G ext4   part    1       1                                     /

VGA info:
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
02:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
03:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
04:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
08:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
09:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
0c:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
0d:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
0e:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)

1bash settings:
1bash version .............: v0019-2.0.002
LOCAL or REMOTE ...........: LOCAL
TEAMVIEWER started ........: YES
SSH daemon started ........: YES
SLOW_USB_KEY_MODE .........: NO
SRR .......................: NO
Watchdog ..................: YES

Temp Control ..............: YES
TARGET_TEMP ...............: 67
__FAN_ADJUST ..............: 5
POWER_ADJUST ..............: 5
ALLOWED_TEMP_DIFF .........: 2
RESTORE_POWER_LIMIT .......: 90
MINIMAL_FAN_SPEED .........: 40

CLEAR_LOGS_ON_BOOT ........: NO
AUTO_UPDATE ...............: BETA
AUTO_REBOOT ...............: NO
_Parallax_MODE (upPaste)...: NO

TELEGRAM_MESSAGES .: NO
TELEGRAM_ALERTS .: YES
TELEGRAM_TYPE .............: papampi
TELEGRAM_TIMEOUT_IN_MINUTES: 60
TELEGRAM_CHATID ...........: CHATID_NOT_SHOWN
TELEGRAM_APIKEY ...........: APIKEY_NOT_SHOWN

P106_100_FULL_HEADLESS_MODE: NO
GPUPowerMizerMode_Adjust...: NO
POWERLIMIT (global) .......: YES
POWERLIMIT_WATTS ..........: 130
CORE_OVERCLOCK (global)....: 200
MEMORY_OVERCLOCK (global) .: 700
MANUAL_FAN ................: NO
ALGO_SPECIFIC_OC ..........: NO

GLOBAL_WORKERNAME .........: NO
AUTO_WORKERNAME ...........: HOST
WORKERNAME ................: 241
plusCPU ...................: NO

ZM_or_EWBF ................: EWBF
EWBF_VERSION ..............: 3_4
EWBF_PERCENT ..............: 0

COIN ......................: ZEC
ZEC_WORKER ................: 101
ZEC_ADDRESS ...............: acs...
ZEC_POOL ..................: europe.equihash-hub.miningpoolhub.com
ZEC_PORT ..................: 20570

I am testing 19.2 but have the problem that the mining process will be terminated, watchdog process too.
Mostly after the miner was switching based on Algo change. Checked also on a second rig with only one 1070TI.
Thanks for your work - any ideas?

Yes it should be terminated and start again
WTM Auto Switch Logic is :
if ALGO_SPECIFIC_OC="NO", it only restart miner and watchdog (to prevent wdog from catching low util and restart again)
if ALGO_SPECIFIC_OC="YES", it checks coins algo
if algo changed, it restart watchdog, temp control and 3main so specific algo takes effect
if algo not changed, it only restart watchdog and miner

You will see a miner terminated in gnome-terminal when algo not changed, if you check wtm tab you see it started with new command line and you can watch miner output log with:

Code:

~/nvOC miner-log

I have some ideas for next version to show the miner info in a new tab when miner terminated.

[mikespax]

Should we maybe retire this thread for a new one unless fullzero is coming back? Just worried about the outdated initial post throwing newbies off completely. It's probably impossible to follow development now.

[WaveFront]

Thanks to all whom helped us testing nvOC v0019-2.0 Community Release.

Testing is almost done and we will start making the full image install any time soon.

If you caught any bugs please send me, Stubo or Leenoox a PM or post in forum so we can correct it before releasing the full image.


Keep calm and carry on mining.

Where can I download the latest update script for the nvOC v0019-2.0 Community Release?
Would it help if I participate to the test (very late) it or would it be better if I wait for the final image?

Testing is almost done,
But it would be great if more people test so we make sure all is good for image release.

Testing - 19-2.0 Community Release Update Script

Hi Papampi,
In the file that I downloaded I cannot find the update script. I can see the release notes and all the new scripts, but the update script is missing. What is the update procedure?

[papampi]

Thanks to all whom helped us testing nvOC v0019-2.0 Community Release.

Testing is almost done and we will start making the full image install any time soon.

If you caught any bugs please send me, Stubo or Leenoox a PM or post in forum so we can correct it before releasing the full image.


Keep calm and carry on mining.

Where can I download the latest update script for the nvOC v0019-2.0 Community Release?
Would it help if I participate to the test (very late) it or would it be better if I wait for the final image?

Testing is almost done,
But it would be great if more people test so we make sure all is good for image release.

Testing - 19-2.0 Community Release Update Script

Hi Papampi,
In the file that I downloaded I cannot find the update script. What is the update procedure?

Sorry,
My mistake, this is the correct link

[killeriq]

hello,

could you please add DSTM miner please? (https://bitcointalk.org/index.php?topic=2021765.0)

Thanks

[papampi]

hello,

could you please add DSTM miner please? (https://bitcointalk.org/index.php?topic=2021765.0)

Thanks

Its already there with the ZM name

1bash:

Code:

ZM_or_EWBF="ZM"  # choose ZM or EWBF miner

# DSTM ZM Miner optional arguments add "--telemetry=$IPW:42000" if you want web info
ZM_OPTS=""

[killeriq]

hello,

could you please add DSTM miner please? (https://bitcointalk.org/index.php?topic=2021765.0)

Thanks

Its already there with the ZM name

1bash:

Code:

ZM_or_EWBF="ZM"  # choose ZM or EWBF miner

# DSTM ZM Miner optional arguments add "--telemetry=$IPW:42000" if you want web info
ZM_OPTS=""

Ah ok thanks cos in version i just downloaded "v0019-1.4"

its only

Code:

ZM_or_EWBF="ZM"  # choose  ZM  or  EWBF

nothing else with "ZM" there also none "# DSTM ZM Miner optional arguments add "--telemetry=$IPW:42000" if you want web info
ZM_OPTS=""

Thanks

[monck]

Yes it should be terminated and start again
WTM Auto Switch Logic is :
if ALGO_SPECIFIC_OC="NO", it only restart miner and watchdog (to prevent wdog from catching low util and restart again)
if ALGO_SPECIFIC_OC="YES", it checks coins algo
if algo changed, it restart watchdog, temp control and 3main so specific algo takes effect
if algo not changed, it only restart watchdog and miner

You will see a miner terminated in gnome-terminal when algo not changed, if you check wtm tab you see it started with new command line and you can watch miner output log with:

Code:

~/nvOC miner-log

I have some ideas for next version to show the miner info in a new tab when miner terminated.

Thanks for explanation - the problem is that nothing is restarting after termination neither wtm nor watchdog and miner.
This behavior is on two independant rigs.
At the time I am running without Auto Switch
As I'am a Linux virgin - is there a possibility to give you more information for check?

[papampi]

Yes it should be terminated and start again
WTM Auto Switch Logic is :
if ALGO_SPECIFIC_OC="NO", it only restart miner and watchdog (to prevent wdog from catching low util and restart again)
if ALGO_SPECIFIC_OC="YES", it checks coins algo
if algo changed, it restart watchdog, temp control and 3main so specific algo takes effect
if algo not changed, it only restart watchdog and miner

You will see a miner terminated in gnome-terminal when algo not changed, if you check wtm tab you see it started with new command line and you can watch miner output log with:

Code:

~/nvOC miner-log

I have some ideas for next version to show the miner info in a new tab when miner terminated.

Thanks for explanation - the problem is that nothing is restarting after termination neither wtm nor watchdog and miner.
This behavior is on two independant rigs.
At the time I am running without Auto Switch
As I'am a Linux virgin - is there a possibility to give you more information for check?

I made a small change so the terminal keeps showing miner output even after switch.
You can run the update script again and it will make the change.
After it finishes just launch the gnome-terminal again, no need to reboot.

If mining wont start again after switch its usually a problem with your coins settings in 1bash
Check and make sure all the coins in WTM_AUTO_SWITCH_COINS=" ..... " has correct values.

Also you said ".... neither wtm nor watchdog and miner."
wtm stops working after switch?
Thats wierd ...
Is there any errors on the wtm switch tab?

[thaelin]

@papampi
   I am currently testing to see the overall result of WTM.  Most will not need what I want so will ask what to edit or add.  I want to watch the overall output of all 4 coins that I have added and want to track each one.  What I would like to add is a date/time stamp on the output of WTM. I have already edited to save last 200k of the file so I can generate a very large data set. This will be added to a spread sheet to see what coin does best at what time and for how long. So far, my ETH has been the best over all. I soon will add 2 more to the data set.

thanks much    thay

[papampi]

@papampi
   I am currently testing to see the overall result of WTM.  Most will not need what I want so will ask what to edit or add.  I want to watch the overall output of all 4 coins that I have added and want to track each one.  What I would like to add is a date/time stamp on the output of WTM. I have already edited to save last 200k of the file so I can generate a very large data set. This will be added to a spread sheet to see what coin does best at what time and for how long. So far, my ETH has been the best over all. I soon will add 2 more to the data set.

thanks much    thay

If you are on latest community release...
Open 8wtm_auto_switch and add

Code:

 | ts "$(date)"

Before the output logs you want timestamp for them
So it will be like this:

Code:

    python2.7 '/home/m1/WTM_SWITCHER' /home/m1/WTM.json  | ts "$(date) - " | tee -a $LOG_FILE

[CryptAtomeTrader44]

@papampi
   I am currently testing to see the overall result of WTM.  Most will not need what I want so will ask what to edit or add.  I want to watch the overall output of all 4 coins that I have added and want to track each one.  What I would like to add is a date/time stamp on the output of WTM. I have already edited to save last 200k of the file so I can generate a very large data set. This will be added to a spread sheet to see what coin does best at what time and for how long. So far, my ETH has been the best over all. I soon will add 2 more to the data set.

thanks much    thay

This is an addition that seems interesting to me to make the right choice of coins to mine according to the algorithms too.
Nicehash was doing this through a graph not so long ago before being stolen our hash stored on their poorly secured servers ...

How do you intend to present the data? In graphical form excel ??

I would be interested in this tool that you intend to develop.

[WaveFront]

Thanks to all whom helped us testing nvOC v0019-2.0 Community Release.

Testing is almost done and we will start making the full image install any time soon.

If you caught any bugs please send me, Stubo or Leenoox a PM or post in forum so we can correct it before releasing the full image.


Keep calm and carry on mining.

Where can I download the latest update script for the nvOC v0019-2.0 Community Release?
Would it help if I participate to the test (very late) it or would it be better if I wait for the final image?

Testing is almost done,
But it would be great if more people test so we make sure all is good for image release.

Testing - 19-2.0 Community Release Update Script

Hi Papampi,
In the file that I downloaded I cannot find the update script. What is the update procedure?

Sorry,
My mistake, this is the correct link

I set the rig just to mine ETH
So far everything is working fine, except for the permission assigned to ethminer. I had to manually change them in order to make it run.
I will test the other features little by little

[papampi]

Thanks to all whom helped us testing nvOC v0019-2.0 Community Release.

Testing is almost done and we will start making the full image install any time soon.

If you caught any bugs please send me, Stubo or Leenoox a PM or post in forum so we can correct it before releasing the full image.


Keep calm and carry on mining.

Where can I download the latest update script for the nvOC v0019-2.0 Community Release?
Would it help if I participate to the test (very late) it or would it be better if I wait for the final image?

Testing is almost done,
But it would be great if more people test so we make sure all is good for image release.

Testing - 19-2.0 Community Release Update Script

Hi Papampi,
In the file that I downloaded I cannot find the update script. What is the update procedure?

Sorry,
My mistake, this is the correct link

I set the rig just to mine ETH
So far everything is working fine, except for the permission assigned to ethminer. I had to manually change them in order to make it run.
I will test the other features little by little

Thanks for the heads up
There was a typo in update script, fixed it.