PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[prostor]

I prefer using Phoenix than Claymore as Phoenix is more stable and won't crash my rig.
Regarding 4gb cards getting obsolete, I heard there is a workaround for 4gb card to be still useful for mining ETH/ETC.
Can anyone share that here with us?

read this:
https://www.nicehash.com/blog/post/dag-size-limit-problem-for-4gb-gpus
https://www.nicehash.com/blog/post/how-to-keep-mining-on-4gb-graphics-cards

[1715325723]

1715325723

[1715325723]

1715325723

[1715325723]

1715325723

[1715325723]

1715325723

[1715325723]

1715325723

[stockton88]

https://ibb.co/fkdVfZq

https://i.ibb.co/tqpwgnQ/Screenshot-2020-05-01-at-9-49-39-AM.png


Does anyone have this problem? The miner just stops and the system doesn't crash at all.

[Trehjulingsleffe]

https://ibb.co/fkdVfZq

https://i.ibb.co/tqpwgnQ/Screenshot-2020-05-01-at-9-49-39-AM.png


Does anyone have this problem? The miner just stops and the system doesn't crash at all.

Sometimes that happens on one of my rigs that uses a single RX 5700 XT.
It stopped happened when i lowered the clocks or put undervolt a little bit higher.

[stockton88]

https://ibb.co/fkdVfZq

https://i.ibb.co/tqpwgnQ/Screenshot-2020-05-01-at-9-49-39-AM.png


Does anyone have this problem? The miner just stops and the system doesn't crash at all.

Sometimes that happens on one of my rigs that uses a single RX 5700 XT.
It stopped happened when i lowered the clocks or put undervolt a little bit higher.

I hope there is an answer to this from the Devs. Mine is 11 cards with RX5700 , RX5700xt mixed.

[br2459]

Might be a dumb question, but with PM do you have to increase the power to get better hashrates out of the 1070s or can you keep it at 70% and still achieve a good hashrate. I am using CM and I had to bump the power up in order to get back to the higher hashrates I had a year or so ago.

[bategojko74]

Might be a dumb question, but with PM do you have to increase the power to get better hashrates out of the 1070s or can you keep it at 70% and still achieve a good hashrate. I am using CM and I had to bump the power up in order to get back to the higher hashrates I had a year or so ago.

Yes

[hustleman]

Anyone else getting a huge jump in stale shares.  I normally only get 1% stale but just recently it jumped to 6% with all the same settings, OC and UV.  Anyone else experience a bit jump?

[4play]

Anyone else getting a huge jump in stale shares.  I normally only get 1% stale but just recently it jumped to 6% with all the same settings, OC and UV.  Anyone else experience a bit jump?

I also noticed that there are many stales shares last day maybe 2 days. And IDK I have 1070 GPUs and hasrate drops for 5-6 MH/s per rig.

[zhihao4456]

anyone mining with 1070Ti? The hashrate per card i get the most is 31mh/s with +200core, +500memory, and 80% power limit....
Would like to know if anyone get better hashrate, if there is would like to know how   

[jgonzi]

anyone mining with 1070Ti? The hashrate per card i get the most is 31mh/s with +200core, +500memory, and 80% power limit....
Would like to know if anyone get better hashrate, if there is would like to know how   

With Phoneix you can get a Little bit more...
- 1st change P2 State off
- With that you should change your memory -200...

Now I'm in Phoneix 32.7 with 150 Core (that depends on model, my model can come with more core) and Memory +525 (but with P2 State off, that means +200 of your set) and Power Limit 66%

If you wanto arribe to 34.7 with the same Power Limit you have to change to the competence...  This values are with ETC.

[jgonzi]

Anyone else getting a huge jump in stale shares.  I normally only get 1% stale but just recently it jumped to 6% with all the same settings, OC and UV.  Anyone else experience a bit jump?

Stales sometimes come for the connecting with the server... how many Ping have you got?. I'm with a Wifi and my ping is 50ms and I'm below 50ms. You should check that, it is probably that you are in a pool with redirection and you have a big ping... that Will make you lot more stales.

[br2459]

anyone mining with 1070Ti? The hashrate per card i get the most is 31mh/s with +200core, +500memory, and 80% power limit....
Would like to know if anyone get better hashrate, if there is would like to know how   

I have 4 x 1070 TI's and I get between 33 and 34 with them. I have +0 core, 70% power and +650 Mem. I am using CM on those ones. I haven't tried PM yet but I am looking at moving all my rigs there soon.

[zhihao4456]

anyone mining with 1070Ti? The hashrate per card i get the most is 31mh/s with +200core, +500memory, and 80% power limit....
Would like to know if anyone get better hashrate, if there is would like to know how   

With Phoneix you can get a Little bit more...
- 1st change P2 State off
- With that you should change your memory -200...

Now I'm in Phoneix 32.7 with 150 Core (that depends on model, my model can come with more core) and Memory +525 (but with P2 State off, that means +200 of your set) and Power Limit 66%

If you wanto arribe to 34.7 with the same Power Limit you have to change to the competence...  This values are with ETC.


I tried to change P2 State Off with nvidia profile inspector...
In afterburner, i change to 70% power limit, +0 core, +500 memory
I can get hashrate 32mh/s but after 1minute there is an error showing Cuda error CudaProgram.cu 456

[zhihao4456]

anyone mining with 1070Ti? The hashrate per card i get the most is 31mh/s with +200core, +500memory, and 80% power limit....
Would like to know if anyone get better hashrate, if there is would like to know how   

I have 4 x 1070 TI's and I get between 33 and 34 with them. I have +0 core, 70% power and +650 Mem. I am using CM on those ones. I haven't tried PM yet but I am looking at moving all my rigs there soon.

yeah, i was getting about 33mh/s on CM.
I wanted to try to get the same or more on PM.
Just started out with PM and figuring what is the best settings for it with 1070ti card

[jgonzi]

anyone mining with 1070Ti? The hashrate per card i get the most is 31mh/s with +200core, +500memory, and 80% power limit....
Would like to know if anyone get better hashrate, if there is would like to know how   

I have 4 x 1070 TI's and I get between 33 and 34 with them. I have +0 core, 70% power and +650 Mem. I am using CM on those ones. I haven't tried PM yet but I am looking at moving all my rigs there soon.

yeah, i was getting about 33mh/s on CM.
I wanted to try to get the same or more on PM.
Just started out with PM and figuring what is the best settings for it with 1070ti card

And to get 33Mhs you are using lot of Watts.. if you want +34.5 you need to change to CM or Nbminer

[br2459]

Anyone with a RX 5600 XT upgraded their BIOS yet to unlock the 14gbps memory? Curious to see how that affects the hashrate. I am guessing that since it is faster it should be hitting 5700 hashrates..

[cas333]

Hello guys!
Anyone having MSI Evoke 5700 GP(not OC) edition and confirming Ethereum hashrate,power consumption and clocks for it?
Thanks in advance!

[br2459]

Hello guys!
Anyone having MSI Evoke 5700 GP(not OC) edition and confirming Ethereum hashrate,power consumption and clocks for it?
Thanks in advance!

I have 2 of them. One is still stock BIOS with modified timings and the other is flashed with the XT BIOS and modified timings. Both are doing 52.9MH/s with Mem clock at 925Mhz. I think the power was around 112W from the wall without system power. Here is my config for those:

-cclock 1325 -cvddc 790 -mclock 905 -mode 1 -clKernel 1 -clNew 1 -clf 0 -lidag 1 -hstats 2 -tt -75 -mt 2 -openclLocalWork 32 -openclGlobalMultiplier 4096​

[zeef]

Hi ,

Im from ClayMore´s and want to test the phoenix miner.

In CM i got 52 MH/s for an vega 64. (155 W on SW miner) and probably 200 from wall.

Here in first test , using auto-tune or intensity 15 i only got 44 mh/S , if increase intensity to 400 i got 32mh/S

Strange behavior.

https://ibb.co/dbZQwP7
https://ibb.co/xfYkzLj

Any ideia where should i look?
 

[Digital_Seytan]

There is only writing and asking on this form of developer phoenixminer. As users, we try to help each other. But the bastard who supposedly copied this software from somewhere as a developer and placed it here is not responding at all while this bastard is making a lot of money off our backs, WHEN IS A NEW VERSION OF PHOENIXMINER, HELLOO anyone else ?