PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[commandera]

to move to ETC right now
but in post i not see any proto for ETC ethermine.org

i have 2 question only to know


1- do proto is require ?
2- SSL Port 5555 or Stratum Port 4444

i haven't idea what different between these ports

[black1ight]

anyone mining with 1070Ti? The hashrate per card i get the most is 31mh/s with +200core, +500memory, and 80% power limit....
Would like to know if anyone get better hashrate, if there is would like to know how   

I have 1070 ti titanium, best i get is on claymore with +150 core +650 memory,  65% power limit, strap 1 getting 34.5 mhs 120 watts power draw.

[zhihao4456]

anyone mining with 1070Ti? The hashrate per card i get the most is 31mh/s with +200core, +500memory, and 80% power limit....
Would like to know if anyone get better hashrate, if there is would like to know how   

I have 1070 ti titanium, best i get is on claymore with +150 core +650 memory,  65% power limit, strap 1 getting 34.5 mhs 120 watts power draw.

how about on PhoenixMiner, what hashrate you get?
did you off the p2-state?

[PhoenixMiner]

Hello again, everybody! We hope you are doing well (as well as possible in these circumstances anyway).

Here are some important updates about PhoenixMiner and the upcoming events:

* All users of 4 GB cards should add the following command line options: -rvram -1 -eres 0  This will allow uninterrupted operation until the next VRAM limit hits, which will be around epoch 350-352 for AMD cards and a bit later for Nvidia cards.
* We are working on a fix for the AMD cards with 4 GB VRAM, which will allow them to work a bit longer after epoch 350, and it will be ready in the next few weeks (certainly before epoch 350 hits), so don't lose hope if you have 4 GB AMD cards yet.
* Do not upgrade to the latest AMD drivers (20.4.x on Windows, or 20.10-1048554 on Linux) as they are not supported by the current PhoenixMiner 4.9c and you will get lower hashrate and higher stale shares as a result.

[UnclWish]

PhoenixMiner, any chance for miner update to support newest AMD drivers?

[zeef]

Hello again, everybody! We hope you are doing well (as well as possible in these circumstances anyway).

Here are some important updates about PhoenixMiner and the upcoming events:

* All users of 4 GB cards should add the following command line options: -rvram -1 -eres 0  This will allow uninterrupted operation until the next VRAM limit hits, which will be around epoch 350-352 for AMD cards and a bit later for Nvidia cards.
* We are working on a fix for the AMD cards with 4 GB VRAM, which will allow them to work a bit longer after epoch 350, and it will be ready in the next few weeks (certainly before epoch 350 hits), so don't lose hope if you have 4 GB AMD cards yet.
* Do not upgrade to the latest AMD drivers (20.4.x on Windows, or 20.10-1048554 on Linux) as they are not supported by the current PhoenixMiner 4.9c and you will get lower hashrate and higher stale shares as a result.

Hi Phoenix,

Im from ClayMore´s miner and want to test the phoenix miner. Smiley

In CM i got 52 MH/s for an vega 64. (155 W on SW miner) and probably 200 from wall.

Here in my tests , using auto-tune or manual or intensity 15 i only got 44 mh/S , if increase intensity to 400 i got 32mh/S

I tested several kernels too, could be my amd drivers : Radeon-Software-Adrenalin-2019-19.5.2   ?

Its a Strange behavior.

Any ideia where should i look?

Thanks
 

[PhoenixMiner]

PhoenixMiner, any chance for miner update to support newest AMD drivers?

  Yes, certainly the new version will support the latest drivers. However we have found some issues with the latest Linux drivers so it is not recommended to change the driver version unless you are unhappy with the older driver (e.g. the hardware control doesn't work, etc.). In terms of hash-rate there isn't significant difference between the drivers with rare exceptions.

Hi Phoenix,

Im from ClayMore´s miner and want to test the phoenix miner. Smiley

In CM i got 52 MH/s for an vega 64. (155 W on SW miner) and probably 200 from wall.

Here in my tests , using auto-tune or manual or intensity 15 i only got 44 mh/S , if increase intensity to 400 i got 32mh/S

I tested several kernels too, could be my amd drivers : Radeon-Software-Adrenalin-2019-19.5.2   ?

Its a Strange behavior.

Any ideia where should i look?

Thanks

   Most probably you are using some options to change the timings and refresh rates of the VRAM, which aren't supported on PhoenixMiner. For similar things, you may use a third-party tool like AMD Memory Tweak tool: https://github.com/Eliovp/amdmemorytweak (note: we are not affiliated with the author(s) of this tool in any way)

[pp55]

Hi Phoenix!

There is a bug in PM4.9c + 20.2.2 drivers (Win). -mclock doesnt work for polaris cards with Samsung memory onboard (probably when use RX5700 as a main card and other cards are Polaris)

And a feature request: to give an apportunity to switch -tt memory or chip temterature dependent (very useful feature for Navi cards where memory is much hotter then chip and a goal is to control memory temperature)

Thanks in advance! Nice to see you back again!

[UnclWish]

Hi Phoenix!

There is a bug in PM4.9c + 20.2.2 drivers (Win). -mclock doesnt work for polaris cards with Samsung memory onboard (probably when use RX5700 as a main card and other cards are Polaris)

And a feature request: to give an apportunity to switch -tt memory or chip temterature dependent (very useful feature for Navi cards where memory is much hotter then chip and a goal is to control memory temperature)

Thanks in advance! Nice to see you back again!

-mclock stoped to work on polaris a long time ago. I didn't remember in what drivers it worked...

[ManDoneKTM]

Hi Phoenix!

There is a bug in PM4.9c + 20.2.2 drivers (Win). -mclock doesnt work for polaris cards with Samsung memory onboard (probably when use RX5700 as a main card and other cards are Polaris)

And a feature request: to give an apportunity to switch -tt memory or chip temterature dependent (very useful feature for Navi cards where memory is much hotter then chip and a goal is to control memory temperature)

Thanks in advance! Nice to see you back again!

-mclock stoped to work on polaris a long time ago. I didn't remember in what drivers it worked...

18.3.4 and 18.6.1

[UnclWish]

Hi Phoenix!

There is a bug in PM4.9c + 20.2.2 drivers (Win). -mclock doesnt work for polaris cards with Samsung memory onboard (probably when use RX5700 as a main card and other cards are Polaris)

And a feature request: to give an apportunity to switch -tt memory or chip temterature dependent (very useful feature for Navi cards where memory is much hotter then chip and a goal is to control memory temperature)

Thanks in advance! Nice to see you back again!

-mclock stoped to work on polaris a long time ago. I didn't remember in what drivers it worked...

18.3.4 and 18.6.1

It's a long time ago... Two years passed.

[zeef]

Hi Phoenix,

Im from ClayMore´s miner and want to test the phoenix miner. Smiley

In CM i got 52 MH/s for an vega 64. (155 W on SW miner) and probably 200 from wall.

Here in my tests , using auto-tune or manual or intensity 15 i only got 44 mh/S , if increase intensity to 400 i got 32mh/S

I tested several kernels too, could be my amd drivers : Radeon-Software-Adrenalin-2019-19.5.2   ?

Its a Strange behavior.

Any ideia where should i look?

Thanks

   Most probably you are using some options to change the timings and refresh rates of the VRAM, which aren't supported on PhoenixMiner. For similar things, you may use a third-party tool like AMD Memory Tweak tool: https://github.com/Eliovp/amdmemorytweak (note: we are not affiliated with the author(s) of this tool in any way)

Hi,

Thanks for response,

Hmm the problem should be that in CM i use -strap command and the miner change the timings on the fly, right ?

In PhoenixMiner should i use the thrid-party to get the same hashes right? or you have some command similiar to -strap for that?

Thanks

[UnclWish]

Hi Phoenix,

Im from ClayMore´s miner and want to test the phoenix miner. Smiley

In CM i got 52 MH/s for an vega 64. (155 W on SW miner) and probably 200 from wall.

Here in my tests , using auto-tune or manual or intensity 15 i only got 44 mh/S , if increase intensity to 400 i got 32mh/S

I tested several kernels too, could be my amd drivers : Radeon-Software-Adrenalin-2019-19.5.2   ?

Its a Strange behavior.

Any ideia where should i look?

Thanks

   Most probably you are using some options to change the timings and refresh rates of the VRAM, which aren't supported on PhoenixMiner. For similar things, you may use a third-party tool like AMD Memory Tweak tool: https://github.com/Eliovp/amdmemorytweak (note: we are not affiliated with the author(s) of this tool in any way)

Hi,

Thanks for response,

Hmm the problem should be that in CM i use -strap command and the miner change the timings on the fly, right ?

In PhoenixMiner should i use the thrid-party to get the same hashes right? or you have some command similiar to -strap for that?

Thanks

From PM readme file:
"-mt <n>
   VRAM timings (AMD under Windows only): 0 - default VBIOS values; 1
   - faster timings; 2 - fastest timings. The default is 0. This is
   useful for mining with AMD cards without modding the VBIOS.
"
Thats not analog of CM -straps parameter. This settings appears in AMD Radeon Settings starting from 19.x.x drivers. It can give increase in speed with stock vbios.

[commandera]

i see much people using long command i feel i'm wrong

i only using ,

Code:

PhoenixMiner.exe -pool ssl://eu1.ethermine.org:5555 -wal 0x4a3a28f53371a8c1b2e66955687711938716722c.TestQ -proto 3

this code only . 7 gpu's 199.500 mh/z using msi afterburner

do i need to add something like boost AMD GPU's ?


because claymore -xrboost . what about PhoenixMiner ?

[UnclWish]

i see much people using long command i feel i'm wrong

i only using ,

Code:

PhoenixMiner.exe -pool ssl://eu1.ethermine.org:5555 -wal 0x4a3a28f53371a8c1b2e66955687711938716722c.TestQ -proto 3

this code only . 7 gpu's 199.500 mh/z using msi afterburner

do i need to add something like boost AMD GPU's ?


because claymore -xrboost . what about PhoenixMiner ?

PhoenixMiner didn't have something like CM -rxboost. It's need to use AMD Memory Tweak tool for increasing REF parameter of each card.

[commandera]

i see much people using long command i feel i'm wrong

i only using ,

Code:

PhoenixMiner.exe -pool ssl://eu1.ethermine.org:5555 -wal 0x4a3a28f53371a8c1b2e66955687711938716722c.TestQ -proto 3

this code only . 7 gpu's 199.500 mh/z using msi afterburner

do i need to add something like boost AMD GPU's ?


because claymore -xrboost . what about PhoenixMiner ?

PhoenixMiner didn't have something like CM -rxboost. It's need to use AMD Memory Tweak tool for increasing REF parameter of each card.

i'm using msi afterburner isn't enough ? isn't afterburner Memory Tweak tool ?

[UnclWish]

i see much people using long command i feel i'm wrong

i only using ,

Code:

PhoenixMiner.exe -pool ssl://eu1.ethermine.org:5555 -wal 0x4a3a28f53371a8c1b2e66955687711938716722c.TestQ -proto 3

this code only . 7 gpu's 199.500 mh/z using msi afterburner

do i need to add something like boost AMD GPU's ?


because claymore -xrboost . what about PhoenixMiner ?

PhoenixMiner didn't have something like CM -rxboost. It's need to use AMD Memory Tweak tool for increasing REF parameter of each card.

i'm using msi afterburner isn't enough ? isn't afterburner Memory Tweak tool ?

No. https://bitcointalk.org/index.php?topic=5123724.0
This tool can set REF parameter. This is what CM make by its -rxboost parameter. Except CM and this tool no other tools can make it.

[bategojko74]

Hi Phoenix,

Im from ClayMore´s miner and want to test the phoenix miner. Smiley

In CM i got 52 MH/s for an vega 64. (155 W on SW miner) and probably 200 from wall.

Here in my tests , using auto-tune or manual or intensity 15 i only got 44 mh/S , if increase intensity to 400 i got 32mh/S

I tested several kernels too, could be my amd drivers : Radeon-Software-Adrenalin-2019-19.5.2   ?

Its a Strange behavior.

Any ideia where should i look?

Thanks

   Most probably you are using some options to change the timings and refresh rates of the VRAM, which aren't supported on PhoenixMiner. For similar things, you may use a third-party tool like AMD Memory Tweak tool: https://github.com/Eliovp/amdmemorytweak (note: we are not affiliated with the author(s) of this tool in any way)

Hi,

Thanks for response,

Hmm the problem should be that in CM i use -strap command and the miner change the timings on the fly, right ?

In PhoenixMiner should i use the thrid-party to get the same hashes right? or you have some command similiar to -strap for that?

Thanks

Yes, you should use AMD Memory Tweak and you will 100% sure get 1.0%-1.5% more hashrate than Claymore. I don't know what are the specific settings of AMD Memory Tweak  for Vega 64, just play a little with it. Every man with more than one brain cell will find them within one day of trying. Maybe 1.5% higher deserves one day effort? Start from this scratch:

Run Claymore with your best settings. After that run in command prompt window (with Administrative privileges if it is required for WinAMDTweak):

WinAMDTweak.exe —current



You will see the current setting of Claymore. Something like this:
https://www.cryptoprofi.info/wp-content/uploads/2019/04/word-image-49.png

Copy/Paste them down in text file.
After that stop Claymore. Run WinAMDTweak.exe --...  with these settings and run Phoenixminer.exe after that with the  same -cclock -mclock -cvddc -mvddc parameters like Claymore.

[zeef]

Hi Phoenix,

Im from ClayMore´s miner and want to test the phoenix miner. Smiley

In CM i got 52 MH/s for an vega 64. (155 W on SW miner) and probably 200 from wall.

Here in my tests , using auto-tune or manual or intensity 15 i only got 44 mh/S , if increase intensity to 400 i got 32mh/S

I tested several kernels too, could be my amd drivers : Radeon-Software-Adrenalin-2019-19.5.2   ?

Its a Strange behavior.

Any ideia where should i look?

Thanks

   Most probably you are using some options to change the timings and refresh rates of the VRAM, which aren't supported on PhoenixMiner. For similar things, you may use a third-party tool like AMD Memory Tweak tool: https://github.com/Eliovp/amdmemorytweak (note: we are not affiliated with the author(s) of this tool in any way)

Hi,

Thanks for response,

Hmm the problem should be that in CM i use -strap command and the miner change the timings on the fly, right ?

In PhoenixMiner should i use the thrid-party to get the same hashes right? or you have some command similiar to -strap for that?

Thanks

Yes, you should use AMD Memory Tweak and you will 100% sure get 1.0%-1.5% more hashrate than Claymore. I don't know what are the specific settings of AMD Memory Tweak  for Vega 64, just play a little with it. Every man with more than one brain cell will find them within one day of trying. Maybe 1.5% higher deserves one day effort? Start from this scratch:

Run Claymore with your best settings. After that run in command prompt window (with Administrative privileges if it is required for WinAMDTweak):

WinAMDTweak.exe —current



You will see the current setting of Claymore. Something like this:
https://www.cryptoprofi.info/wp-content/uploads/2019/04/word-image-49.png

Copy/Paste them down in text file.
After that stop Claymore. Run WinAMDTweak.exe --...  with these settings and run Phoenixminer.exe after that with the  same -cclock -mclock -cvddc -mvddc parameters like Claymore.

Hello,

Perfect Help,

Will try that

Have an nice day

[Tzolak]

Hi. I'm using PhoenixMiner to try to mine some Ethereum, and I am not sure if I have it set up correctly....been tracking my ethereum wallet and mining for the last 8 hours, but see no change? can someone help me?

In the config file I have the ethereum pool url, then -wal (My wallet) but it never seems to move anything...