PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[bategojko74]

Hi Phoenix,

Im from ClayMore´s miner and want to test the phoenix miner. Smiley

In CM i got 52 MH/s for an vega 64. (155 W on SW miner) and probably 200 from wall.

Here in my tests , using auto-tune or manual or intensity 15 i only got 44 mh/S , if increase intensity to 400 i got 32mh/S

I tested several kernels too, could be my amd drivers : Radeon-Software-Adrenalin-2019-19.5.2   ?

Its a Strange behavior.

Any ideia where should i look?

Thanks

   Most probably you are using some options to change the timings and refresh rates of the VRAM, which aren't supported on PhoenixMiner. For similar things, you may use a third-party tool like AMD Memory Tweak tool: https://github.com/Eliovp/amdmemorytweak (note: we are not affiliated with the author(s) of this tool in any way)

Hi,

Thanks for response,

Hmm the problem should be that in CM i use -strap command and the miner change the timings on the fly, right ?

In PhoenixMiner should i use the thrid-party to get the same hashes right? or you have some command similiar to -strap for that?

Thanks

Yes, you should use AMD Memory Tweak and you will 100% sure get 1.0%-1.5% more hashrate than Claymore. I don't know what are the specific settings of AMD Memory Tweak  for Vega 64, just play a little with it. Every man with more than one brain cell will find them within one day of trying. Maybe 1.5% higher deserves one day effort? Start from this scratch:

Run Claymore with your best settings. After that run in command prompt window (with Administrative privileges if it is required for WinAMDTweak):

WinAMDTweak.exe —current



You will see the current setting of Claymore. Something like this:
https://www.cryptoprofi.info/wp-content/uploads/2019/04/word-image-49.png

Copy/Paste them down in text file.
After that stop Claymore. Run WinAMDTweak.exe --...  with these settings and run Phoenixminer.exe after that with the  same -cclock -mclock -cvddc -mvddc parameters like Claymore.

[zeef]

Hi Phoenix,

Im from ClayMore´s miner and want to test the phoenix miner. Smiley

In CM i got 52 MH/s for an vega 64. (155 W on SW miner) and probably 200 from wall.

Here in my tests , using auto-tune or manual or intensity 15 i only got 44 mh/S , if increase intensity to 400 i got 32mh/S

I tested several kernels too, could be my amd drivers : Radeon-Software-Adrenalin-2019-19.5.2   ?

Its a Strange behavior.

Any ideia where should i look?

Thanks

   Most probably you are using some options to change the timings and refresh rates of the VRAM, which aren't supported on PhoenixMiner. For similar things, you may use a third-party tool like AMD Memory Tweak tool: https://github.com/Eliovp/amdmemorytweak (note: we are not affiliated with the author(s) of this tool in any way)

Hi,

Thanks for response,

Hmm the problem should be that in CM i use -strap command and the miner change the timings on the fly, right ?

In PhoenixMiner should i use the thrid-party to get the same hashes right? or you have some command similiar to -strap for that?

Thanks

Yes, you should use AMD Memory Tweak and you will 100% sure get 1.0%-1.5% more hashrate than Claymore. I don't know what are the specific settings of AMD Memory Tweak  for Vega 64, just play a little with it. Every man with more than one brain cell will find them within one day of trying. Maybe 1.5% higher deserves one day effort? Start from this scratch:

Run Claymore with your best settings. After that run in command prompt window (with Administrative privileges if it is required for WinAMDTweak):

WinAMDTweak.exe —current



You will see the current setting of Claymore. Something like this:
https://www.cryptoprofi.info/wp-content/uploads/2019/04/word-image-49.png

Copy/Paste them down in text file.
After that stop Claymore. Run WinAMDTweak.exe --...  with these settings and run Phoenixminer.exe after that with the  same -cclock -mclock -cvddc -mvddc parameters like Claymore.

Hello,

Perfect Help,

Will try that

Have an nice day

[Tzolak]

Hi. I'm using PhoenixMiner to try to mine some Ethereum, and I am not sure if I have it set up correctly....been tracking my ethereum wallet and mining for the last 8 hours, but see no change? can someone help me?

In the config file I have the ethereum pool url, then -wal (My wallet) but it never seems to move anything...

[hustleman]

Hi. I'm using PhoenixMiner to try to mine some Ethereum, and I am not sure if I have it set up correctly....been tracking my ethereum wallet and mining for the last 8 hours, but see no change? can someone help me?

In the config file I have the ethereum pool url, then -wal (My wallet) but it never seems to move anything...

depending on what pool you are using... there is likely a threshold that has to be mined before it is deposited into your wallet i.e. .05 or .1 Eth.  So if you have not meet that threshold yet, it will remain at the pool until it is.  

Example:  I mine at ethermine.org and my threshold is set for 0.1 eth before it is deposited into my wallet.  With my current set up that usually takes close to 52 hours before I see 0.1 eth depostited

[commandera]

Hi. I'm using PhoenixMiner to try to mine some Ethereum, and I am not sure if I have it set up correctly....been tracking my ethereum wallet and mining for the last 8 hours, but see no change? can someone help me?

In the config file I have the ethereum pool url, then -wal (My wallet) but it never seems to move anything...

depending on what pool you are using... there is likely a threshold that has to be mined before it is deposited into your wallet i.e. .05 or .1 Eth.  So if you have not meet that threshold yet, it will remain at the pool until it is.  

Example:  I mine at ethermine.org and my threshold is set for 0.1 eth before it is deposited into my wallet.  With my current set up that usually takes close to 52 hours before I see 0.1 eth depostited

are you sure ?

in settings
Payment threshold in Ether (Min: 0.05 Ether, Max: 10 Ether ). Max one payout every 24 hours.  Payout Policy
0.05

[cas333]

Hello guys,
Please help me undervolt vram for my RX 5700,i can not lower memory temps,lowest one is 92
Thanks in advance

[Tzolak]

Hi. I'm using PhoenixMiner to try to mine some Ethereum, and I am not sure if I have it set up correctly....been tracking my ethereum wallet and mining for the last 8 hours, but see no change? can someone help me?

In the config file I have the ethereum pool url, then -wal (My wallet) but it never seems to move anything...

depending on what pool you are using... there is likely a threshold that has to be mined before it is deposited into your wallet i.e. .05 or .1 Eth.  So if you have not meet that threshold yet, it will remain at the pool until it is.  

Example:  I mine at ethermine.org and my threshold is set for 0.1 eth before it is deposited into my wallet.  With my current set up that usually takes close to 52 hours before I see 0.1 eth depostited

are you sure ?

in settings
Payment threshold in Ether (Min: 0.05 Ether, Max: 10 Ether ). Max one payout every 24 hours.  Payout Policy
0.05

Where can I check this? I only have the .bat file running. I can try to look there?

My Command line is as such: -pool us1.ethermine.org:4444 -pool2 us2.ethermine.org:4444 -wal (Wallet link) -proto 3

Does that look right?

Edit 2:
I was able to check progress on ethmine.org...guess I need to get a mininum of .05 before it transfers.

[hustleman]

Yeah thats correct.  You have to meet their minimum threshold of 0.05 before its transferred to your wallet.

[commandera]

Hi. I'm using PhoenixMiner to try to mine some Ethereum, and I am not sure if I have it set up correctly....been tracking my ethereum wallet and mining for the last 8 hours, but see no change? can someone help me?

In the config file I have the ethereum pool url, then -wal (My wallet) but it never seems to move anything...

depending on what pool you are using... there is likely a threshold that has to be mined before it is deposited into your wallet i.e. .05 or .1 Eth.  So if you have not meet that threshold yet, it will remain at the pool until it is.  

Example:  I mine at ethermine.org and my threshold is set for 0.1 eth before it is deposited into my wallet.  With my current set up that usually takes close to 52 hours before I see 0.1 eth depostited

are you sure ?

in settings
Payment threshold in Ether (Min: 0.05 Ether, Max: 10 Ether ). Max one payout every 24 hours.  Payout Policy
0.05

Where can I check this? I only have the .bat file running. I can try to look there?

My Command line is as such: -pool us1.ethermine.org:4444 -pool2 us2.ethermine.org:4444 -wal (Wallet link) -proto 3

Does that look right?

Edit 2:
I was able to check progress on ethmine.org...guess I need to get a mininum of .05 before it transfers.

I'm used this command

Code:

PhoenixMiner.exe -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://asia1.ethermine.org:4444 -wal 0x4a3a28f53371a8c6b3e669556877119300716722c.Rig001 -proto 3

as i know SSL better ( more safe ) you have to change EU to US and asia to US and your wallet and work name and go ahead with 5555 SSL port

[Chosscoin]

Good morning to everybody

I have modified the original bios of my Gigabyte 5700XT, only copying the value of the VRAM that appeared in the 1550 field in the rest of the fields. I have flashed that BIOS and now I get 56/57 MHS with a consumption of 123W.

I am a newbie to AMD and I ask for help, how can I modify the BIOS to obtain less electricity consumption? Is there a way to reach 61Mhs as I have seen in some Internet video?

I have no AMD experience, I have never modified BIOS, can I download a Bios Mod for my card from somewhere?

Thank you very much and sorry for the inconvenience.

[commandera]

Good morning to everybody

I have modified the original bios of my Gigabyte 5700XT, only copying the value of the VRAM that appeared in the 1550 field in the rest of the fields. I have flashed that BIOS and now I get 56/57 MHS with a consumption of 123W.

I am a newbie to AMD and I ask for help, how can I modify the BIOS to obtain less electricity consumption? Is there a way to reach 61Mhs as I have seen in some Internet video?

I have no AMD experience, I have never modified BIOS, can I download a Bios Mod for my card from somewhere?

Thank you very much and sorry for the inconvenience.

may i know what Mh/s with default bios 5700XT,

please tell us b4 and after mh/s

because i'm planning to buy this card but i will never flash bios

[Chosscoin]

Good morning to everybody

I have modified the original bios of my Gigabyte 5700XT, only copying the value of the VRAM that appeared in the 1550 field in the rest of the fields. I have flashed that BIOS and now I get 56/57 MHS with a consumption of 123W.

I am a newbie to AMD and I ask for help, how can I modify the BIOS to obtain less electricity consumption? Is there a way to reach 61Mhs as I have seen in some Internet video?

I have no AMD experience, I have never modified BIOS, can I download a Bios Mod for my card from somewhere?

Thank you very much and sorry for the inconvenience.

may i know what Mh/s with default bios 5700XT,

please tell us b4 and after mh/s

because i'm planning to buy this card but i will never flash bios

With Stock values around 50Mhs and with OC about 53 Mhs

[bategojko74]

Good morning to everybody

I have modified the original bios of my Gigabyte 5700XT, only copying the value of the VRAM that appeared in the 1550 field in the rest of the fields. I have flashed that BIOS and now I get 56/57 MHS with a consumption of 123W.

I am a newbie to AMD and I ask for help, how can I modify the BIOS to obtain less electricity consumption? Is there a way to reach 61Mhs as I have seen in some Internet video?

I have no AMD experience, I have never modified BIOS, can I download a Bios Mod for my card from somewhere?

Thank you very much and sorry for the inconvenience.

may i know what Mh/s with default bios 5700XT,

please tell us b4 and after mh/s

because i'm planning to buy this card but i will never flash bios

If you don't flash bios you will get only 53 instead of 56. It is absolutely safe to flash your bios.

[commandera]

Good morning to everybody

I have modified the original bios of my Gigabyte 5700XT, only copying the value of the VRAM that appeared in the 1550 field in the rest of the fields. I have flashed that BIOS and now I get 56/57 MHS with a consumption of 123W.

I am a newbie to AMD and I ask for help, how can I modify the BIOS to obtain less electricity consumption? Is there a way to reach 61Mhs as I have seen in some Internet video?

I have no AMD experience, I have never modified BIOS, can I download a Bios Mod for my card from somewhere?

Thank you very much and sorry for the inconvenience.

may i know what Mh/s with default bios 5700XT,

please tell us b4 and after mh/s

because i'm planning to buy this card but i will never flash bios

If you don't flash bios you will get only 53 instead of 56. It is absolutely safe to flash your bios.

i just did one before 1 hour my gpu in msi afterburner got 0 and crash blue screen etc..

i backup my bios already and back work fine
to hard to find bios Lmao but i will see again how

so just need one help here . i have x3 580 will one bios work for all or each ?

i will not do it again thanks god no lose the 580,

[commandera]

isn't in PhoenixMiner
 0\0\0
is , share \ what here \ incorrect ETH share?
what is the middle ?

[bategojko74]

Good morning to everybody

I have modified the original bios of my Gigabyte 5700XT, only copying the value of the VRAM that appeared in the 1550 field in the rest of the fields. I have flashed that BIOS and now I get 56/57 MHS with a consumption of 123W.

I am a newbie to AMD and I ask for help, how can I modify the BIOS to obtain less electricity consumption? Is there a way to reach 61Mhs as I have seen in some Internet video?

I have no AMD experience, I have never modified BIOS, can I download a Bios Mod for my card from somewhere?

Thank you very much and sorry for the inconvenience.

may i know what Mh/s with default bios 5700XT,

please tell us b4 and after mh/s

because i'm planning to buy this card but i will never flash bios

If you don't flash bios you will get only 53 instead of 56. It is absolutely safe to flash your bios.

i just did one before 1 hour my gpu in msi afterburner got 0 and crash blue screen etc..

i backup my bios already and back work fine
to hard to find bios Lmao but i will see again how

so just need one help here . i have x3 580 will one bios work for all or each ?

i will not do it again thanks god no lose the 580,

You'd better save all 3 Bios images for later backup.

[Binary100100]

isn't in PhoenixMiner
 0\0\0
is , share \ what here \ incorrect ETH share?
what is the middle ?

Accepted / Rejected / HW Error

That's what I've always thought anyway.

[black1ight]

I think its

Accepted / Timedout / Rejected

:-)

[bluspirit]

Accepted / Rejected / Incorrect

 

[solidgang]

would anyone be interested at a motherboard that boost a little bit on minning?