phungus
Full Member
Offline
Activity: 128
Merit: 100
I'm doin' fine on cloud 9
|
|
August 25, 2011, 12:13:40 PM |
|
So, I've been running guiminer on Windows 7 with 11.6 for awhile now and it's been pretty stable.
I just upgraded to the 08xx release and the mining speeds are all over the place. When I first start it up, I actually get more MH/s than I ever have, but within 10-15 minutes I drops to around half. The only way I can pick it up is to totally restart.
I'm back to trying 0701 again, but of course it's slower.
What can I look at to start troubleshooting? Normally I only see slowdowns if I've got Youtube open in Firefox or something else that uses Flash. That is not the case now.
|
I can do stuff
|
|
|
BitMinerN8
|
|
August 25, 2011, 01:28:27 PM |
|
Thanks for the donation! For anyone who was in on the bounty for this update, you can send the coins to: 1MDDh2h4cAZDafgc94mr9q95dhRYcJbNQo .5 BTC sent as a donation to Kiv for the update.
.5004242 BTC sent for the update, thank you and keep up the great work!
|
|
|
|
pekv2
|
|
August 25, 2011, 03:27:47 PM |
|
Ok, now I can confirm an increase with the new version. I had to change my driver to 11.6 and sdk to 2.4 because I have added a second card, in which I was using 10.11 with sdk 2.1 resulted bad results with the newer guiminer.
So anyone that finds a decreased performance in newest guiminer, update your driver and SDK.
kudos
|
|
|
|
Fiyasko
Legendary
Offline
Activity: 1428
Merit: 1001
Okey Dokey Lokey
|
|
August 25, 2011, 03:32:50 PM |
|
If you dont know yet, Catalyst 11.7 Drivers give you a Noteable increse in hash rates. 11.8 Are out aswell.
|
|
|
|
|
bigjake52
Newbie
Offline
Activity: 44
Merit: 0
|
|
August 26, 2011, 05:41:17 AM |
|
Okay this is a strange bug but I can see the miner pogram any more,
the window refuses to show up. and no its not minimised,
Restarted my computer and did a crap load of things. I still dont get the window.
|
|
|
|
pekv2
|
|
August 26, 2011, 06:03:02 AM Last edit: August 26, 2011, 06:16:58 AM by pekv2 |
|
Okay this is a strange bug but I can see the miner pogram any more,
the window refuses to show up. and no its not minimised,
Restarted my computer and did a crap load of things. I still dont get the window.
If you have a few cards mining with dummy plugs, guiminer might be opening up on the dummy plug "monitor" as such there is no monitor but a virtual screen you cannot see. Happened to me, I disabled w/e adapter in CCC, then guiminer popped up on my main monitor. Edit: Of course, re enable it.
|
|
|
|
dub0matic
|
|
August 26, 2011, 06:11:03 AM |
|
if you are on win7 right click on desktop go to screen resolution go to the drop down menu and choose show desktop only on 1
|
make it rain haha btc 176MrZ3CCXGb1GqFiGaoqQpaynzYqZsW6n
|
|
|
Dorkslayz
|
|
August 26, 2011, 03:22:01 PM |
|
Ive downloaded the latest version and whenever I try to run with Phoenix, I get "FATAL kernel error: GPU not supported! phatk2 is designed for ATI 5xxx and newer only. Try -k poclbm instead" when running it on my GTS250 (it worked fine before).
Help?
|
|
|
|
Fiyasko
Legendary
Offline
Activity: 1428
Merit: 1001
Okey Dokey Lokey
|
|
August 26, 2011, 03:42:54 PM |
|
o.0 That is something new. I've installed 11.8 on 4 different miners now (up from 11.7 and before that 11.6) [yes im getting the SDK's n stuff] and i havent had any problems. YAY ME!
|
|
|
|
pekv2
|
|
August 26, 2011, 03:57:13 PM |
|
o.0 That is something new.
I've installed 11.8 on 4 different miners now (up from 11.7 and before that 11.6) [yes im getting the SDK's n stuff] and i havent had any problems.
YAY ME!
I switch to 11.8 last night.
|
|
|
|
Meatball
|
|
August 26, 2011, 06:41:37 PM |
|
I'm on 11.8/SDK 2.5 for all my machines and it's working fine on Win 7.
|
|
|
|
flyswatta
Member
Offline
Activity: 100
Merit: 10
|
|
August 26, 2011, 07:02:18 PM |
|
How to use a backup pool aka fallback support:
Fallback support is in the OpenCL miner only. In the flags, specify the info of the backup pool or pools. For example if I want to fallback to my account on slush's pool, I would write:
Kiv.GPU:mypass@api.bitcoin.cz:8332
When you do this do you pass a flag? In other posts it looks like --backup= is used. Do we to specify that in the flags? as in --backup=Kiv.GPU:mypass@api.bitcoin.cz:8332
|
|
|
|
Meatball
|
|
August 26, 2011, 07:25:25 PM |
|
I'm pretty sure backup pools work with the Phoenix miner's as well. There's a -b flag you can set a fail-over pool, though I don't believe there's failback. I can't say for certain it works because my primary pool (Ars) hasn't been down in a while.
|
|
|
|
Isepick
|
|
August 27, 2011, 12:01:30 AM |
|
just so you know it list shares now but not stales.
+1 Showing zero stales when using openCL miner.
|
|
|
|
OgNasty
Donator
Legendary
Offline
Activity: 4900
Merit: 4750
Leading Crypto Sports Betting & Casino Platform
|
|
August 27, 2011, 12:38:57 AM |
|
1% increase over previous version for me.
Best miner available IMO.
|
..Stake.com.. | | | ▄████████████████████████████████████▄ ██ ▄▄▄▄▄▄▄▄▄▄ ▄▄▄▄▄▄▄▄▄▄ ██ ▄████▄ ██ ▀▀▀▀▀▀▀▀▀▀ ██████████ ▀▀▀▀▀▀▀▀▀▀ ██ ██████ ██ ██████████ ██ ██ ██████████ ██ ▀██▀ ██ ██ ██ ██████ ██ ██ ██ ██ ██ ██ ██████ ██ █████ ███ ██████ ██ ████▄ ██ ██ █████ ███ ████ ████ █████ ███ ████████ ██ ████ ████ ██████████ ████ ████ ████▀ ██ ██████████ ▄▄▄▄▄▄▄▄▄▄ ██████████ ██ ██ ▀▀▀▀▀▀▀▀▀▀ ██ ▀█████████▀ ▄████████████▄ ▀█████████▀ ▄▄▄▄▄▄▄▄▄▄▄▄███ ██ ██ ███▄▄▄▄▄▄▄▄▄▄▄▄ ██████████████████████████████████████████ | | | | | | ▄▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▄ █ ▄▀▄ █▀▀█▀▄▄ █ █▀█ █ ▐ ▐▌ █ ▄██▄ █ ▌ █ █ ▄██████▄ █ ▌ ▐▌ █ ██████████ █ ▐ █ █ ▐██████████▌ █ ▐ ▐▌ █ ▀▀██████▀▀ █ ▌ █ █ ▄▄▄██▄▄▄ █ ▌▐▌ █ █▐ █ █ █▐▐▌ █ █▐█ ▀▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▀█ | | | | | | ▄▄█████████▄▄ ▄██▀▀▀▀█████▀▀▀▀██▄ ▄█▀ ▐█▌ ▀█▄ ██ ▐█▌ ██ ████▄ ▄█████▄ ▄████ ████████▄███████████▄████████ ███▀ █████████████ ▀███ ██ ███████████ ██ ▀█▄ █████████ ▄█▀ ▀█▄ ▄██▀▀▀▀▀▀▀██▄ ▄▄▄█▀ ▀███████ ███████▀ ▀█████▄ ▄█████▀ ▀▀▀███▄▄▄███▀▀▀ | | | ..PLAY NOW.. |
|
|
|
goozman96
|
|
August 27, 2011, 01:50:38 PM |
|
After updating to the newest version, it gives me a "FATAL kernel error: GPU not supported! phatk2 is designed for ATI 5xxx and newer only. Try -k poclbm instead." error when using phoenix. I have an NVIDIA GTX 260 and using the previous version of GUIMiner, I had no problem with mining with phoenix. In fact, it gave me around 5 Mhash/s more than OpenCL.
And since you didn't get around to implementing my last requests, I'll just post them again..
1. The ability to remember previously used flags. There could just be a drop down menu button next to the text input field. 2. The ability to minimize to the task bar instead of only just the tray. (and when you press the X button, for it to actually close, not minimize to the tray) Options, please! 3. Also, regarding my request for keeping the window the same size and position when restarting the program - the same position is kept, however, the size still reverts to default. I have the window stretched a little more than default, horizontally, however, when I restart the program, it still goes back to the same default size. But the positioning of the window is fixed.
4. When I press refresh balance for the first time and it asks me for my token, please make it so that the "(paste token here)" is pre-highlighed or allow it to become fully highlighted by triple clicking on it. 5. If you do add the ability to minimize GUIMiner to the task bar instead of only to the tray, could you make it so that it displays the MH/s in the title of the program, so that it is shown in the task bar. I'm not sure if you have ever used utorrent (I'm guessing you're familiar with it), just like how on utorrent you can have it so that it shows your up and down speed in the title bar, that's what I want with GUIMiner. For it to have the MH/s in the title bar, at the beginning of it (because if it's at the end of the title bar - ie after "GUIMiner - v2011-07-01" - then there won't be enough room to display it in the task bar.
So basically, I want it to be like this: "##MH/s - GUIMiner - v2011-##-##"
Thanks for reading and your consideration.
|
BTC: 19DKtsdGfQyFzNiEze9KuFQrWGiLDvg6F1 | LTC: LbV6UGyjYbVP49NvQFmuAnkADcaFYvNagK | NMC: NDCdMJmTmGH54Cezmo3CwSxAC7grAoZJbj
|
|
|
Kiv (OP)
|
|
August 27, 2011, 10:59:33 PM |
|
In previous versions you would use the --backup flag. In the current version they changed it so you don't need to specify a flag, just put the info in the box. You can use multiple backups just by separating them with spaces. How to use a backup pool aka fallback support:
Fallback support is in the OpenCL miner only. In the flags, specify the info of the backup pool or pools. For example if I want to fallback to my account on slush's pool, I would write:
Kiv.GPU:mypass@api.bitcoin.cz:8332
When you do this do you pass a flag? In other posts it looks like --backup= is used. Do we to specify that in the flags? as in --backup=Kiv.GPU:mypass@api.bitcoin.cz:8332
|
|
|
|
flyswatta
Member
Offline
Activity: 100
Merit: 10
|
|
August 28, 2011, 02:22:38 AM |
|
In previous versions you would use the --backup flag. In the current version they changed it so you don't need to specify a flag, just put the info in the box. You can use multiple backups just by separating them with spaces. How to use a backup pool aka fallback support:
Fallback support is in the OpenCL miner only. In the flags, specify the info of the backup pool or pools. For example if I want to fallback to my account on slush's pool, I would write:
Kiv.GPU:mypass@api.bitcoin.cz:8332
When you do this do you pass a flag? In other posts it looks like --backup= is used. Do we to specify that in the flags? as in --backup=Kiv.GPU:mypass@api.bitcoin.cz:8332 Thank you - I guess it was too easy!
|
|
|
|
ssateneth
Legendary
Offline
Activity: 1344
Merit: 1004
|
|
August 28, 2011, 08:33:26 PM |
|
After updating to the newest version, it gives me a "FATAL kernel error: GPU not supported! phatk2 is designed for ATI 5xxx and newer only. Try -k poclbm instead." error when using phoenix. I have an NVIDIA GTX 260 and using the previous version of GUIMiner, I had no problem with mining with phoenix. In fact, it gave me around 5 Mhash/s more than OpenCL.
And since you didn't get around to implementing my last requests, I'll just post them again..
1. The ability to remember previously used flags. There could just be a drop down menu button next to the text input field. 2. The ability to minimize to the task bar instead of only just the tray. (and when you press the X button, for it to actually close, not minimize to the tray) Options, please! 3. Also, regarding my request for keeping the window the same size and position when restarting the program - the same position is kept, however, the size still reverts to default. I have the window stretched a little more than default, horizontally, however, when I restart the program, it still goes back to the same default size. But the positioning of the window is fixed.
4. When I press refresh balance for the first time and it asks me for my token, please make it so that the "(paste token here)" is pre-highlighed or allow it to become fully highlighted by triple clicking on it. 5. If you do add the ability to minimize GUIMiner to the task bar instead of only to the tray, could you make it so that it displays the MH/s in the title of the program, so that it is shown in the task bar. I'm not sure if you have ever used utorrent (I'm guessing you're familiar with it), just like how on utorrent you can have it so that it shows your up and down speed in the title bar, that's what I want with GUIMiner. For it to have the MH/s in the title bar, at the beginning of it (because if it's at the end of the title bar - ie after "GUIMiner - v2011-07-01" - then there won't be enough room to display it in the task bar.
So basically, I want it to be like this: "##MH/s - GUIMiner - v2011-##-##"
Thanks for reading and your consideration.
You can still use phoenix for your nvidia cards. You just have to specify using the poclbm kernel instead of any of the phatk kernels since phatk is ONLY meant to be used with ATI cards that are 5xxx or higher. Just do what it says and specify using the poclbm kernel with the "-k poclbm" in extra flags. Make sure all your kernel arguments come AFTER specifying the kernel (such as AGGRESSION, VECTORS, etc) and phoenix-specific arguments (such as -a 200 for sample size, etc) BEFORE the "-k poclbm"
|
|
|
|
|