spiffcow
|
|
June 30, 2014, 09:08:11 PM |
|
Any advice how to keep my 290 stay under 75 c ?
i run at stock clock but they go to 79-82 fan at 90
how to lower the intensity?
I got 3 of those 290. the cooling is absolutley terrible in terms of heat and noise. all of them are in open space. if you have a spare fan at home point it at them. My 290 rigs are in the garage. It's about 90 *F here, and they've been running stable for weeks (I only stop mining when I upgrade to the latest Claymore miner). I haven't checked the temp, but they're making way less noise than they did in the winter when I was mining scrypt.
|
|
|
|
RentaMouse
|
|
June 30, 2014, 10:59:10 PM |
|
With the current v4 miner I went from 220H/s with a R9-270X Toxic on Catalyst 14.4 to 395H/s with Catalyst 14.6 (the current beta available) Yes I know I shouldnt have been using 14.4 in the first place but I was still surprised how much of a difference it made
|
Currently donating all of our 1% pool fee to the dev fund - mine at CryptonotepoolUK and support XMR at no extra cost!
|
|
|
Starscream
|
|
June 30, 2014, 11:19:27 PM |
|
Any advice how to keep my 290 stay under 75 c ?
i run at stock clock but they go to 79-82 fan at 90
how to lower the intensity?
I got 3 of those 290. the cooling is absolutley terrible in terms of heat and noise. all of them are in open space. if you have a spare fan at home point it at them. My 290 rigs are in the garage. It's about 90 *F here, and they've been running stable for weeks (I only stop mining when I upgrade to the latest Claymore miner). I haven't checked the temp, but they're making way less noise than they did in the winter when I was mining scrypt. They are cooler compared to when mining scrypt, that's for sure.I'm at about 76c~.
|
|
|
|
CiscoStud
Newbie
Offline
Activity: 20
Merit: 0
|
|
July 01, 2014, 02:07:09 AM |
|
Any advice how to keep my 290 stay under 75 c ?
i run at stock clock but they go to 79-82 fan at 90
how to lower the intensity?
My 3 290x's all run at 71 degrees with the fan at 83. All stock clocks with stock reference design. I'm not running in uber and I get 1951h/s
|
|
|
|
gregor12
Newbie
Offline
Activity: 52
Merit: 0
|
|
July 01, 2014, 04:05:47 AM Last edit: July 01, 2014, 04:23:59 AM by gregor12 |
|
Anyone else got problem with 280x rig? when i run single card it works fine, but when I add 2nd card it keeps crashing after few hours of mining(6-18h). I get notice about virtual memory, i tryed to set it to 16gb and 32gb, still crashing. I got 8gb of ram and 280x toxic, on stock it works ~840hashes (1150engine 1600mem), if i downclock to 1100engine, 1500mem it works 860 hashes and i still get crash after like 12h. This is the msg - GPU memory allocation failed. Try to set at least 16 GB of Virtual Memory: Computer Properties / Advanced System Settings / Performance / Advanced / Virtual Memory
|
|
|
|
Starlightbreaker
Legendary
Offline
Activity: 1764
Merit: 1006
|
|
July 01, 2014, 05:17:07 AM Last edit: September 15, 2016, 10:49:23 AM by Starlightbreaker |
|
Anyone else got problem with 280x rig? when i run single card it works fine, but when I add 2nd card it keeps crashing after few hours of mining(6-18h). I get notice about virtual memory, i tryed to set it to 16gb and 32gb, still crashing. I got 8gb of ram and 280x toxic, on stock it works ~840hashes (1150engine 1600mem), if i downclock to 1100engine, 1500mem it works 860 hashes and i still get crash after like 12h. This is the msg - GPU memory allocation failed. Try to set at least 16 GB of Virtual Memory: Computer Properties / Advanced System Settings / Performance / Advanced / Virtual Memory
nope. running 5 cards on 8.1, no problems. it ran for 4-5 days before i restarted it.
|
|
|
|
MacHead2006
Member
Offline
Activity: 118
Merit: 10
|
|
July 01, 2014, 05:22:46 AM Last edit: July 01, 2014, 06:24:14 AM by MacHead2006 |
|
Any news on Linux version ?
I understand miner is not open source but maybe I can have pre-compiled version for PIMP ? Have no any wish to install windows on all my rigs.
|
|
|
|
anatolikostis
Legendary
Offline
Activity: 2026
Merit: 1005
|
|
July 01, 2014, 07:19:45 AM |
|
Any advice how to keep my 290 stay under 75 c ?
coolaboratory liquid pro or coolaboratory liquid metal pad (for cpu 38*38mm) - it`s enough one pad to cut for 4 gpus
|
|
|
|
superresistant
Legendary
Offline
Activity: 2142
Merit: 1131
|
|
July 01, 2014, 08:01:51 AM |
|
Any advice how to keep my 290 stay under 75 c ?
coolaboratory liquid pro or coolaboratory liquid metal pad (for cpu 38*38mm) - it`s enough one pad to cut for 4 gpus Is it proven to be better than the average paste/pad or is it just marketing ? I know from experience that even a shit thermal paste give good result when you change from old paste.
|
|
|
|
ozzy1926
|
|
July 01, 2014, 08:05:02 AM |
|
Any advice how to keep my 290 stay under 75 c ?
coolaboratory liquid pro or coolaboratory liquid metal pad (for cpu 38*38mm) - it`s enough one pad to cut for 4 gpus Is it proven to be better than the average paste/pad or is it just marketing ? I know from experience that even a shit thermal paste give good result when you change from old paste. clp,clu is a good paste but hard to remove after.Also you should be very careful when applying and it eats aluminum.
|
|
|
|
Kablam
Newbie
Offline
Activity: 33
Merit: 0
|
|
July 01, 2014, 09:54:55 AM |
|
|
|
|
|
Vizierx
Copper Member
Newbie
Offline
Activity: 194
Merit: 0
|
|
July 01, 2014, 10:17:15 AM |
|
Any advice how to keep my 290 stay under 75 c ?
i run at stock clock but they go to 79-82 fan at 90
how to lower the intensity?
I will add "intensity" option soon, working on it. Ok thanks, also new fun lower some degree now it is 75 during day..
|
|
|
|
SpeedDemon13
|
|
July 01, 2014, 11:43:12 AM |
|
Yup, hopefully it will be done soon. Nice to see an open source miner come out.
|
CRYPTSY exchange: https://www.cryptsy.com/users/register?refid=9017 BURST= BURST-TE3W-CFGH-7343-6VM6R BTC=1CNsqGUR9YJNrhydQZnUPbaDv6h4uaYCHv ETH=0x144bc9fe471d3c71d8e09d58060d78661b1d4f32 SHF=0x13a0a2cb0d55eca975cf2d97015f7d580ce52d85 EXP=0xd71921dca837e415a58ca0d6dd2223cc84e0ea2f SC=6bdf9d12a983fed6723abad91a39be4f95d227f9bdb0490de3b8e5d45357f63d564638b1bd71 CLAMS=xGVTdM9EJpNBCYAjHFVxuZGcqvoL22nP6f SOIL=0x8b5c989bc931c0769a50ecaf9ffe490c67cb5911
|
|
|
Simbded
Newbie
Offline
Activity: 10
Merit: 0
|
|
July 01, 2014, 12:55:53 PM |
|
Yup, hopefully it will be done soon. Nice to see an open source miner come out. Guys, do not rejoice. It's more bad than good news. Now this adgoritm will be available not only for window miners, but also for Linux Miners too. So again significantly increase the diff of the network, but it is much worse than dev fee.
|
|
|
|
burnbabyburn71
|
|
July 01, 2014, 01:15:07 PM |
|
Just noticed both of my cards are only using 1gb out of 2gb memory and I am not in crossfire mode. I get a decent hashrate though, about 390 h/s per 270x. Is MSI afterburner just reporting the statistics incorrectly?
|
Web Dev | General Graphics Design | Windows/Linux Wallet Compiles | Certified member of the BCs
|
|
|
burnbabyburn71
|
|
July 01, 2014, 01:19:29 PM |
|
Yup, hopefully it will be done soon. Nice to see an open source miner come out. Guys, do not rejoice. It's more bad than good news. Now this adgoritm will be available not only for window miners, but also for Linux Miners too. So again significantly increase the diff of the network, but it is much worse than dev fee. Wow greedy guy over here. I expect as the development of Cryptonote coins continues, the exchange rates will rise. I think this is good news as it means development for Cryptonote is advancing. I could be wrong though.
|
Web Dev | General Graphics Design | Windows/Linux Wallet Compiles | Certified member of the BCs
|
|
|
MacHead2006
Member
Offline
Activity: 118
Merit: 10
|
|
July 01, 2014, 01:21:15 PM |
|
Guys, do not rejoice. It's more bad than good news. Now this adgoritm will be available not only for window miners, but also for Linux Miners too.
Nothing can stop progress. Enjoy your last days in elite windows club And IMHO. If coins are strong more hashrate will not do much harm.
|
|
|
|
hero18688
|
|
July 01, 2014, 03:36:24 PM |
|
I got only 2500h/s with 6*280x @1160.What's wrong?To compare,My another 6*270x got 2230 h/s.So little gap.
|
|
|
|
slimdim
|
|
July 01, 2014, 04:01:43 PM |
|
what this? - 07/01/14-19:57:13 - SHARE FOUND (target 62000) - (GPU 0 of 3) WATCHDOG: Thread 8286904 hangs in OpenCL call, you need to restart miner WATCHDOG: Thread 8286904 hangs in OpenCL call, you need to restart miner
|
|
|
|
TheFuneral
|
|
July 01, 2014, 04:32:06 PM |
|
my hash rates still drop over time. Does anyone else notice that? This is specifically on r9 290s.
This situation still occurs. Does it happen for others? My 7950s and 7970s seem impressively stable.
|
|
|
|
|