hugomenezes
Newbie
Offline
Activity: 6
Merit: 0
|
|
May 05, 2018, 11:45:23 AM |
|
Thks! Hi,
How i can select GPU 10 , 11 , 12 , 13? I try to use -di 10,11,12 but the miner use the GPU 1 , GPU 2.
Best regards
change to Hexadecimal 10 -> A 11 -> B etc...
|
|
|
|
300k20
Newbie
Offline
Activity: 1
Merit: 0
|
|
May 05, 2018, 04:54:53 PM |
|
My miner keeps crashing with new 11.7 version. Im running an 11 gpu system consisting of 8 gtx1070 Nvidia and 3 AMD RX580 gpus with modded bios.
Running AMD version Adrenalin 17.12.2.
My system currently only works with Claymore miner v10.3 with occassional crashes once to twice a week. When I try to run v11.7, it reads the 3 AMD cards then freezes before reading the Nvidia cards. I have another Nvidia only machine that runs fine with v11.7 with same Nvidia drivers.
Im mining ETH only. What can be the issue??
|
|
|
|
Chipychop
Member
Offline
Activity: 91
Merit: 10
|
|
May 05, 2018, 06:24:02 PM |
|
My miner keeps crashing with new 11.7 version. Im running an 11 gpu system consisting of 8 gtx1070 Nvidia and 3 AMD RX580 gpus with modded bios.
Running AMD version Adrenalin 17.12.2.
My system currently only works with Claymore miner v10.3 with occassional crashes once to twice a week. When I try to run v11.7, it reads the 3 AMD cards then freezes before reading the Nvidia cards. I have another Nvidia only machine that runs fine with v11.7 with same Nvidia drivers.
Im mining ETH only. What can be the issue??
Mine also crashes but don't know why.... I thought that it was produced by my last changes on bat file What do you think about the value powerlimit of my cards? all cards are sapphire rx 580 nitro+ 4gb....... What would you recommend me to use? setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -dpool stratum+tcp://mine.nlpool.nl:5766 -dpsw x -dcoin blake2s -allcoins 1 -allpools 1 -r 1 -fanmin 40 -fanmax 65 -cvddc 850 -mvddc 950 -dcri 50 -powlim -11
|
|
|
|
Chipychop
Member
Offline
Activity: 91
Merit: 10
|
|
May 05, 2018, 06:29:39 PM |
|
I also have another question about drivers and general config.
I haven't updated my graphic card's drivers since I installed the well-known "blockchain drivers of august"... I've only downloaded the last claymore miner and that's all.
Do you recommend me to update drivers to the lastest available?
|
|
|
|
janding
Jr. Member
Offline
Activity: 170
Merit: 6
|
|
May 05, 2018, 06:45:42 PM |
|
I also have another question about drivers and general config.
I haven't updated my graphic card's drivers since I installed the well-known "blockchain drivers of august"... I've only downloaded the last claymore miner and that's all.
Do you recommend me to update drivers to the lastest available?
You should uninstall the blockchain drivers as soon as you see this message. Very buggy and many issues with clocks and voltages. Install latest drivers. You will be fine.
|
|
|
|
Chipychop
Member
Offline
Activity: 91
Merit: 10
|
|
May 05, 2018, 06:55:17 PM |
|
I also have another question about drivers and general config.
I haven't updated my graphic card's drivers since I installed the well-known "blockchain drivers of august"... I've only downloaded the last claymore miner and that's all.
Do you recommend me to update drivers to the lastest available?
You should uninstall the blockchain drivers as soon as you see this message. Very buggy and many issues with clocks and voltages. Install latest drivers. You will be fine. seriously??? I'll do it so!! thanks!
|
|
|
|
haliy-2017
Newbie
Offline
Activity: 74
Merit: 0
|
|
May 05, 2018, 07:16:31 PM |
|
bat NVIDIA 1060 6G? ?? EthDcrMiner64.exe -epool stratum + ssl: //eu1.ethermine.org: 5555 -ewal wallet.rig -epsw x -mode 1 -ftime 10 -wd 1 -logsmaxsize 15 -r 0 -minspeed 200 -mport 0 -tstop -tstart -mclock -cclock -tt ? -fanmin -powlim -30, -? ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
|
|
|
|
Chipychop
Member
Offline
Activity: 91
Merit: 10
|
|
May 05, 2018, 07:36:04 PM |
|
bat NVIDIA 1060 6G? ?? EthDcrMiner64.exe -epool stratum + ssl: //eu1.ethermine.org: 5555 -ewal wallet.rig -epsw x -mode 1 -ftime 10 -wd 1 -logsmaxsize 15 -r 0 -minspeed 200 -mport 0 -tstop -tstart -mclock -cclock -tt ? -fanmin -powlim -30, -? ,,,,,,,,,,,,,,,,,,,,,,,,,,,,, GIGABYTE GTX 1060 6GB WINDFORCE (MICRON MEMORY) Ethereum 23.4 – 18.8 Mh/s – Verge (blake2s) 234 Mh/s bat file for Ethereum dual mining Verge (XVG) blake2s: EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal ETH_WALLET.WORKER_NAME -epsw x -dpool stratum+tcp://mine.nlpool.nl:5766 -dwal VERGE_WALLET -dpsw x -dcoin blake2s -tstop 75 -r 1 -dcri 80 -allcoins 1 -allpools 1 -gser 4 try and comment!!
|
|
|
|
WhackOBill
Jr. Member
Offline
Activity: 73
Merit: 3
|
|
May 05, 2018, 11:13:49 PM |
|
bat NVIDIA 1060 6G? ?? EthDcrMiner64.exe -epool stratum + ssl: //eu1.ethermine.org: 5555 -ewal wallet.rig -epsw x -mode 1 -ftime 10 -wd 1 -logsmaxsize 15 -r 0 -minspeed 200 -mport 0 -tstop -tstart -mclock -cclock -tt ? -fanmin -powlim -30, -? ,,,,,,,,,,,,,,,,,,,,,,,,,,,,, Why all of the extraneous spaces? I can't imagine that will parse properly.
|
|
|
|
Nippy-ua
Newbie
Offline
Activity: 48
Merit: 0
|
|
May 05, 2018, 11:44:00 PM |
|
11.7[ 136.376204] [drm:amdgpu_fill_buffer [amdgpu]] *ERROR* Trying to clear memory with ring turned off. [ 360.315536] INFO: task ethdcrminer64:1455 blocked for more than 120 seconds. [ 360.315770] Tainted: G OE 4.4.0-116-generic #140-Ubuntu [ 360.315985] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 360.316233] ethdcrminer64 D ffff880447b1fa48 0 1455 1454 0x00000004 [ 360.316244] ffff880447b1fa48 ffff880447b1fa28 ffff88044bff9e00 ffff880447561e00 [ 360.316251] ffff880447b20000 ffff880447b1fb48 ffff880447e0f4b0 0000000000000001 [ 360.316258] 0000000000100ba0 ffff880447b1fa60 ffffffff8184ae45 ffff88044896cc00 [ 360.316265] Call Trace: [ 360.316279] [<ffffffff8184ae45>] schedule+0x35/0x80 [ 360.316396] [<ffffffffc02cc434>] amd_sched_entity_push_job+0x74/0x120 [amdgpu] [ 360.316408] [<ffffffff810c69d0>] ? wake_atomic_t_function+0x60/0x60 [ 360.316517] [<ffffffffc02ccf81>] amdgpu_job_submit+0x81/0xc0 [amdgpu] [ 360.316596] [<ffffffffc0227cf0>] amdgpu_vm_bo_update_mapping+0x330/0x400 [amdgpu] [ 360.316671] [<ffffffffc0224a50>] ? amdgpu_vm_it_subtree_search+0x50/0x50 [amdgpu] [ 360.316745] [<ffffffffc02280f8>] amdgpu_vm_bo_update+0x338/0x640 [amdgpu] [ 360.316815] [<ffffffffc02145d0>] amdgpu_gem_va_ioctl+0x530/0x550 [amdgpu] [ 360.316842] [<ffffffffc0089e75>] ? drm_gem_handle_create_tail+0xe5/0x190 [drm] [ 360.316853] [<ffffffff811b1e01>] ? kvfree+0x1/0x40 [ 360.316877] [<ffffffffc008a865>] drm_ioctl+0x155/0x540 [drm] [ 360.316946] [<ffffffffc02140a0>] ? amdgpu_gem_metadata_ioctl+0x250/0x250 [amdgpu] [ 360.316954] [<ffffffff810bc0f7>] ? put_prev_entity+0x97/0x7d0 [ 360.316962] [<ffffffff811a3e97>] ? lru_cache_add_active_or_unevictable+0x27/0xa0 [ 360.317022] [<ffffffffc01f604c>] amdgpu_drm_ioctl+0x4c/0x80 [amdgpu] [ 360.317031] [<ffffffff81227b8f>] do_vfs_ioctl+0x2af/0x4b0 [ 360.317039] [<ffffffff8184ae45>] ? schedule+0x35/0x80 [ 360.317046] [<ffffffff81227e09>] SyS_ioctl+0x79/0x90 [ 360.317055] [<ffffffff8184efc8>] entry_SYSCALL_64_fastpath+0x1c/0xbb
|
|
|
|
solamentezeus
Newbie
Offline
Activity: 14
Merit: 0
|
|
May 06, 2018, 03:25:52 AM |
|
Greetings everyone and Claymore, I was running a build of x4 RX470 4GB and x1 RX570 4GB with blockchain drivers from august and Claymore 10.0 for months now with no issue, maybe some crash now and then, dusty risers or whatever, so today I decided to try newest AMD Drivers (Adrenalin 18.2.1) with Claymore 11.7 and I switched to compute mode into the Radeon Settings and the cards gives me 17 mh/s, even running Claymore as admin(through cmd as admin because if i try running start.bat as admin it crashes instantly) and pressing Y for compute mode it gives 17 mh/s and some other 23 mh/s, what could be wrong? the rig has 16384MB on both for mem virtual, Is there anything wrong? What could be possibly causing this? thanks in advance for your responses much appreciated.
|
|
|
|
tizoka
Newbie
Offline
Activity: 4
Merit: 0
|
|
May 06, 2018, 04:06:59 AM |
|
|
|
|
|
Maniac9331
Newbie
Offline
Activity: 20
Merit: 0
|
|
May 06, 2018, 05:01:08 AM |
|
and we go crazy over 2-3 MH/s more )) cheers to the guy i guess if real:))
|
|
|
|
yvmen
Newbie
Offline
Activity: 51
Merit: 0
|
|
May 06, 2018, 06:25:11 AM |
|
he have a machine mining at that pool and he have a nicehash exactly point as the same rig name
|
|
|
|
Balthazar
Legendary
Offline
Activity: 3108
Merit: 1359
|
|
May 06, 2018, 07:35:48 AM |
|
- fixed issue with "-esm 3" (again).
Sorry for disturbing you again, but it looks like -esm 3 mode is still not stable. People are reporting sporadic app crashes while using -esm 3. http://i64.tinypic.com/ipsa38.jpgSame systems are perfectly stable while using -esm 0 and can work during the weeks without any issues. Memory corruption error, maybe?
|
|
|
|
RuMiner
Member
Offline
Activity: 168
Merit: 15
|
|
May 06, 2018, 08:40:06 AM |
|
Balthazar I'm having this issue with default "esm" also. It's very rare (up to several weeks once), so I've fixed tihs using Windows Scheduler. This error message leaves a record in Application log, error code: 1000. It just triggers a start.bat call.
|
|
|
|
janding
Jr. Member
Offline
Activity: 170
Merit: 6
|
|
May 06, 2018, 11:49:17 AM |
|
Mirrors, lots of Mirrors. Trick ? What the crap trick do you imagine is going on ?
|
|
|
|
Chipychop
Member
Offline
Activity: 91
Merit: 10
|
|
May 06, 2018, 12:39:54 PM |
|
I post again to asking about -powlim value on claymore using rx 580 nitro+ 4gb. recommended value??
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
May 06, 2018, 12:53:53 PM |
|
- fixed issue with "-esm 3" (again).
Sorry for disturbing you again, but it looks like -esm 3 mode is still not stable. People are reporting sporadic app crashes while using -esm 3. Same systems are perfectly stable while using -esm 0 and can work during the weeks without any issues. Memory corruption error, maybe? I'm not sure if it is related to "-esm 3". Also I cannot fix it with this screenshot, I need some related log files and some way to reproduce it.
|
|
|
|
Balthazar
Legendary
Offline
Activity: 3108
Merit: 1359
|
|
May 06, 2018, 02:30:14 PM |
|
- fixed issue with "-esm 3" (again).
Sorry for disturbing you again, but it looks like -esm 3 mode is still not stable. People are reporting sporadic app crashes while using -esm 3. Same systems are perfectly stable while using -esm 0 and can work during the weeks without any issues. Memory corruption error, maybe? I'm not sure if it is related to "-esm 3". Also I cannot fix it with this screenshot, I need some related log files and some way to reproduce it. Hi. One of users uploaded this log file: https://drive.google.com/file/d/1EhuT77U3SiCo3K4e_DY9MvFSpijoK2cD/view?usp=sharing
|
|
|
|
|