Nanashii
Newbie
Offline
Activity: 4
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 19, 2018, 12:26:07 PM |
|
lower memory clock try 600, 580,560 etc
Yup, I lowered it to 600 and will see how it goes. Next step will be to switch back to 11.5 and maybe roll back the video card drivers as well. Not sure what to do after that. How much ram do you have exactly?
By ram I am talking about the system memory not the video card memory.
You might have to up your ram or up your virtual memory.
I got a similiar error such as this but it was on the XMR miner however the errors look identical.
I have 4GB of system memory. The virtual memory is set to 50,000. I used to have it at 16,000 and after all the updates, I started getting a cuda 11 error when starting the miner. Raised it to 50,000 and that error was resolved.
|
|
|
|
leonix007
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 1008
Merit: 297
Grow with community
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 19, 2018, 02:00:05 PM |
|
lower memory clock try 600, 580,560 etc
Yup, I lowered it to 600 and will see how it goes. Next step will be to switch back to 11.5 and maybe roll back the video card drivers as well. Not sure what to do after that. How much ram do you have exactly?
By ram I am talking about the system memory not the video card memory.
You might have to up your ram or up your virtual memory.
I got a similiar error such as this but it was on the XMR miner however the errors look identical.
I have 4GB of system memory. The virtual memory is set to 50,000. I used to have it at 16,000 and after all the updates, I started getting a cuda 11 error when starting the miner. Raised it to 50,000 and that error was resolved. try to update also your driver like this 376.33 Version for Nvidias
|
|
|
|
kadirinazor
Newbie
Offline
Activity: 6
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 19, 2018, 07:37:51 PM |
|
hello, i want to take output like first blue text but always taking output dark green. What is identify this? i have both amd and nvidia cards and i take this output only 1 rig.. I like it. How can i change? https://ibb.co/jxx0aohttps://ibb.co/jxx0ao
|
|
|
|
xunl
Newbie
Offline
Activity: 33
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 19, 2018, 09:45:34 PM |
|
Feature request
In Phoenix miner, I can do Phoenixminer.exe -list to get a list of GPUs and exit, NO MINING at all. So I wrote a script to auto check if all GPUs boot up after windows start. If gpus are missing then reboot before start mining. Can Claymore add something similar to list all gpus and exit w/o mining?
What's the difference: time to shutdown When no mining operation is runing, shutdown /r /f /t 1 can take place right away. When mining operation starts, even force kill the process can take a few seconds to minute to complete before reboot.
Since all the reboots are just fix errors and do not earn coins, the shorter the better.
Thanks
|
|
|
|
iSuX
Jr. Member
Offline
Activity: 42
Merit: 8
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 20, 2018, 08:01:37 AM Last edit: May 21, 2018, 08:07:47 AM by iSuX Merited by vapourminer (1) |
|
Feature request
In Phoenix miner, I can do Phoenixminer.exe -list to get a list of GPUs and exit, NO MINING at all. So I wrote a script to auto check if all GPUs boot up after windows start. If gpus are missing then reboot before start mining. Can Claymore add something similar to list all gpus and exit w/o mining?
What's the difference: time to shutdown When no mining operation is runing, shutdown /r /f /t 1 can take place right away. When mining operation starts, even force kill the process can take a few seconds to minute to complete before reboot.
Since all the reboots are just fix errors and do not earn coins, the shorter the better.
Thanks
This is a weird request, did you actually look at the timestamp in the claymore log? Or even look at the log? Here is an example. 11:09:18:605 218c 11:09:18:605 218c ΙΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝ» 11:09:18:605 218c Ί Claymore's Dual GPU Miner - v11.7 Ί 11:09:18:620 218c Ί ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK Ί 11:09:18:620 218c ΘΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΌ 11:09:18:620 218c 11:09:18:620 218c b581 11:09:18:839 218c ETH: 10 pools are specified 11:09:18:839 218c Main Ethereum pool is eth-eu.maxhash.org:11011 11:09:20:668 218c OpenCL platform: AMD Accelerated Parallel Processing 11:09:20:683 218c OpenCL initializing... 11:09:20:683 218c AMD Cards available: 8 As you see, Claymore took an ENTIRE TWO SECONDS to tell me how many GPU are present. I defy you to better that by running some pointless info-only batchfile, read the output, e.g. all gpu present and accounted for, then run the actual start batch file. (in under 2 seconds). Why don't you investigate why your rig is so unstable, that it needs stop, start, fail, reboot, before mining, THAT is indeed wasted time, it also indicates far more serious underlying issues with your rig, issues likely to cause stoppages, crashes, and forcing you to reboot, THAT is time worth saving, but is not solved, assisted or aided by this request imho. Send some info on your rig, os, versions, hardware, check your system event logs, follow best practise guidelines, (no updates unless there is specific mention of a "something" you need, a problem YOU HAVE, that is specified solved etc), disable all services not relevant to mining, remove all scheduled tasks, lean-rig philosophy etc. Ignore everyone who gives advice such as "update your driver" without actually specifying WHAT version they mean you to use, (moronic in the extreme!) Read the claymore readme, especially the last sections. If all else fails, divide and conquer, (remove half your GPUs/risers,cables, power cables, headers, and run the rig, if it exhibits the same issues of instability, remove that half of the hardware, and add back the other half. If that is stable, you can narrow down by adding back, half the other half removed hardware, (1/4 etc), keep dividing order/half, and eventually you will find the cause. Systematic, quantifiable testing and analysis. Working by halves exponentially increases the odds you'll find the cause, (faster than one by one etc), and it also covers situations like too much load on psu for example. Work with all clocks and powers at the factory settings, until you're confident it's stable. THEN start the OC, and hard-core stuff. Remember, if you're overclocking, you're pushing it. Some hardware is more tolerant than others, equally, you're possibly shortening the MTBF, so don't assume stability is a permanent situation, given time, there will be degradation, THAT is an absolute certainty. Good luck.
|
KISS. Did you read the Readme.txt? Summarise/Itemise your hardware/versions/expectations/batchfile & results. The more specific, detailed, the better
|
|
|
intek
Newbie
Offline
Activity: 2
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 20, 2018, 08:19:48 AM |
|
my Claymore's is stuck and my pool is nanopool, what the problem ? any one help? im not the only one who have this problem. thanks! https://ibb.co/eVNsO8
|
|
|
|
iSuX
Jr. Member
Offline
Activity: 42
Merit: 8
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 20, 2018, 01:24:30 PM |
|
my Claymore's is stuck and my pool is nanopool, what the problem ? any one help? im not the only one who have this problem. thanks! ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fibb.co%2FeVNsO8&t=665&c=8AbR6PAaQMxCqg) Log File?
|
KISS. Did you read the Readme.txt? Summarise/Itemise your hardware/versions/expectations/batchfile & results. The more specific, detailed, the better
|
|
|
iRrromka
Newbie
Offline
Activity: 37
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 20, 2018, 02:38:19 PM |
|
Does anyone has challenged with asrock h110 pro btc?
I have one config on
0. Win10Pro 1709 1. Clay 11.7 2. AMD 18.3.4 3. 13 AMD RX 580 8 GB 4. 8 gb RAM 5. 80 gb virtual memory 6. 3 PSU Corsair HX1000
It can mine for hours and reboots twice in a minutes.
|
|
|
|
Dxx26
Newbie
Offline
Activity: 1
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 20, 2018, 06:29:08 PM |
|
Does anyone has challenged with asrock h110 pro btc?
I have one config on
0. Win10Pro 1709 1. Clay 11.7 2. AMD 18.3.4 3. 13 AMD RX 580 8 GB 4. 8 gb RAM 5. 80 gb virtual memory 6. 3 PSU Corsair HX1000
It can mine for hours and reboots twice in a minutes.
Your problem is windows and the solution is Simple Mining OS 😉
|
|
|
|
alivanich
Newbie
Offline
Activity: 21
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 20, 2018, 08:30:40 PM |
|
last week i have this problem on amd hd 7950 and 280x with 3gb gddr OS: windows 7 13:18:31:718 84c Setting DAG epoch #187 for GPU2 13:18:31:843 aa4 GPU0, OpenCL error -4 (0) - cannot create DAG on GPU 13:18:31:859 84c GPU2, OpenCL error -4 (0) - cannot create DAG on GPU I use them to mining not ethereum coin (like pirl). And I have to set the parameter "-nofee 1"
|
|
|
|
alivanich
Newbie
Offline
Activity: 21
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 20, 2018, 08:39:11 PM |
|
small bugreport:
mining didn't start if you set this two options at the same time: -allcoins -1 -nofee 1
|
|
|
|
muzuca
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 182
Merit: 13
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 21, 2018, 12:45:03 AM |
|
Hi guys,which coin is worth in dual mining?
|
|
|
|
iSuX
Jr. Member
Offline
Activity: 42
Merit: 8
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 21, 2018, 06:26:29 AM |
|
Does anyone has challenged with asrock h110 pro btc?
I have one config on
0. Win10Pro 1709 1. Clay 11.7 2. AMD 18.3.4 3. 13 AMD RX 580 8 GB 4. 8 gb RAM 5. 80 gb virtual memory 6. 3 PSU Corsair HX1000
It can mine for hours and reboots twice in a minutes.
Hey, was this rig ever stable? To put it another way, is this a new issue, and previously this rig was stable? One thing I wanted to post on, PSUs, deserves it's own post, so check back in 30 min, I'll write it up now. Good luck btw.
|
KISS. Did you read the Readme.txt? Summarise/Itemise your hardware/versions/expectations/batchfile & results. The more specific, detailed, the better
|
|
|
iRrromka
Newbie
Offline
Activity: 37
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 21, 2018, 06:50:14 AM |
|
Does anyone has challenged with asrock h110 pro btc?
Hey, was this rig ever stable? To put it another way, is this a new issue, and previously this rig was stable? One thing I wanted to post on, PSUs, deserves it's own post, so check back in 30 min, I'll write it up now. Good luck btw. Yes, it was stable with 10 AMD RX. Now it's working for 14 hours. But yesterday there were 3 sudden reboots in one hour
|
|
|
|
iSuX
Jr. Member
Offline
Activity: 42
Merit: 8
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 21, 2018, 07:30:53 AM Last edit: May 21, 2018, 06:26:32 PM by iSuX |
|
OVERLOAD!
Background: In the early days of my mining project, I had managed to get 2 rigs stable. They were built in succession, so the RIG1 had been running non-stop for some 7~8 weeks, ahead of RIG2.
These rigs used a few different PSUs, all Corsair 1000W, RM1000x, HX1000, HX1000i.
At about the 3 month point, RIG1, hit a bump, "random" reboot, (it's was running a USB watchdog, so I was unsure if this was the trigger, and disabled it for testing purposes), equally, event logs only mentioned kernel power, which is pretty vague. Fortunately, things went downhill fast, and I stripped the rig down for inspection.
Cutting to the chase here, the problem was traced to the SATA/Peripheral 6pin plug on the PSU itself. In this case, the connector was melted on the 12V pin, the pin welded into the cables socket, and all the insulation crumbled on the plug/socket, and melted some 2cm up the wire itself.
Now, I had failed to appreciate a number of things, and these are worth sharing. The plugs are rated 10A, but in reality, one should not assume to work anywhere close to that "limit" for 24/7 operation. Usually about half that is a safe maximum.
Why I didn't pay attention to a glaringly obvious stupidity on the part of Corsair is my own fault.
The Corsair, (and cables of all the PSU vendors for that matter), all have 4 Molex connectors in parallel. Now each Molex is rated to 10A, so how can one expect to pull half that, x4, (20A) through a single 10A plug/socket on the PSU? Or if you want kindergarten logic, pull 4x 10A (molex) (40A) through a single 10A outlet?
I had stupidly assumed the PCIe risers were mostly inert, as power would in the whole come direct to the GPU. WRONG!
In all cases I had used all 4 of those cable headers, whether those be molex or SATA power, and in all cases there were clear signs or damage after 3 months. (<2 months on rig2!)
I've rewired all my rigs, maximum 2 devices (PCIe risers, SSD, relay, fan-banks) per cable.
The Corsair PSU in all cases failed to trip safety cutouts, at least the HX1000i didn't log that it had, the RM1000x and HX1000, have no datalink so maybe they did, I have no way to tell. But equally, this kind of failure is unlikely to cause a trip out, because the PSU is actually delivering LESS power, as current flow is inhibited by the degrading plug/socket!
I shipped 3 PSU back to Corsair.
Signs to look for. Has a previously stable rig, become unstable, and you didn't change anything, drivers, hardware, etc? Do you have more than 2 devices on a single power cable?
Checks/Inspections Power off all PSUs, remove AC plugs, then remove the cable-sockets from the PSU outlet plugs. Inspect the pins in the PSU outlet plugs.
Warning signs include: Pins no longer shiny/silver/gold, but dull, oxidised, black or burned. Gently flex the cable near the FAR end of the cable, (farthest from the PSU), this should give you a feel for GOOD cable flex, (normal for THAT cable). Now repeat that flex-test at the other end of the cable, (right where it comes out of the PSU plug). If you feel less flex, or it could be like a solid rod, no flex, that is a clear sign of overload.
This is a vicious cycle, as you overload, the wires heat up, they expand and abraid on each other, and oxidise. They do this more, right next to any connection, because there is a break in the insulation, allowing the ingress of air, and the oxygen component accelerates the oxidisation. The cables loose flexibility because of this, and also heat up more, accelerating their demise, in extreme cases this will melt away the wire insulation, and even the plug/socket. If there was ANY human element during manufacture, (skin oils on the wires during handling, crimping, poor stripping, stand damage, poor crimping, bruising), these will drastically increase the likelihood of failure, especially if you pull more current through them.
ALL these signs were present on all my RIGs!!!
All have been rewired 2 PCIe risers per power cable, and 6 weeks on, all reinspected and there were no signs of degradation. A further inspection was done 2 months later, and again there were no signs of overload.
I have a feeling there will be MANY miners out there, who didn't give much thought to plug/socket ratings, and trusted the vendors would be using safe practice, WRONG!
Think: National Lampoons Christmas Vacation, (the Christmas lights scenes), because Evga, Corsair, and all the other vendors are shipping time bomb cables, and NO WARNINGS on them, or the PSU manuals.
Using 3 of the 4 headers might be ok, I opted for maximum of 2, because this is standard/safe practise in situations like this.
REPEAT: Signs to look for. Has a previously stable rig, become unstable, and you didn't change anything, drivers, hardware, etc? Do you have more than 2 devices on a single power cable?
Finally: Don't jump to conclusions about Claymore or OS, or drivers, until you're satisfied the hardware is OK!
Good luck everyone.
|
KISS. Did you read the Readme.txt? Summarise/Itemise your hardware/versions/expectations/batchfile & results. The more specific, detailed, the better
|
|
|
intek
Newbie
Offline
Activity: 2
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 21, 2018, 07:44:14 AM |
|
my Claymore's is stuck and my pool is nanopool, what the problem ? any one help? im not the only one who have this problem. thanks! https://ibb.co/eVNsO8Log File? this my log file : 08:57:41:807 1864 Check and remove old log files... 08:57:41:807 1864 args: -epool eth-asia1.nanopool.org:9999 -ewal ****/****@gmail.com -epsw x -mode 1 -ftime 10 08:57:41:807 1864 08:57:41:807 1864 ΙΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝ» 08:57:41:823 1864 Ί Claymore's Dual GPU Miner - v11.7 Ί 08:57:41:823 1864 Ί ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK Ί 08:57:41:823 1864 ΘΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΌ 08:57:41:823 1864 08:57:41:823 1864 b583 08:57:42:042 1864 ETH: 5 pools are specified 08:57:42:042 1864 Main Ethereum pool is eth-asia1.nanopool.org:9999 08:58:14:862 388 08:58:47:667 388 08:59:20:472 388 08:59:53:277 388 09:00:26:082 388 09:00:58:887 388 09:01:31:692 388 09:02:04:497 388 09:02:37:302 388 09:03:10:107 388 09:03:11:138 388 Miner cannot initialize for 5 minutes, need to restart miner! 09:03:12:747 388 Restarting OK, exit...
|
|
|
|
iSuX
Jr. Member
Offline
Activity: 42
Merit: 8
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 21, 2018, 07:50:29 AM |
|
Does anyone has challenged with asrock h110 pro btc?
Hey, was this rig ever stable? To put it another way, is this a new issue, and previously this rig was stable? One thing I wanted to post on, PSUs, deserves it's own post, so check back in 30 min, I'll write it up now. Good luck btw. Yes, it was stable with 10 AMD RX. Now it's working for 14 hours. But yesterday there were 3 sudden reboots in one hour Your RIG and component selection/quantity is very similar to one of my RIGs. Actually, I have scaled back from 13GPU, max 4x RX580 per 1000W Corsair, (assuming 1 PSU is also powering MB). I did build a 13GPU rig for someone, and it IS super stable, but it was a long fight to get there, and I'd estimate it cost at least 1 month of downtime before I felt that is really stable. That is 1 month of lost mining time, and a LOT of my time, Given it was super stable at 10GPU, loosing so much time for the 11th, 12, and mostly 13th GPU makes me consider if that was worth it. Of course, given payback time mining, it WAS worth it, but one can only say that with hindsight, and I've actually settled on 8GPU as a max per rig, (with 1000W PSUs), simply because I can build that up to super stable in half a day, and have a pretty high certainty it will be mining after 5 hours, and at what hash rate. The problem is, with more and more GPU per rig, down time REALLY starts to hurt more and more. Even rebooting a 13GPU rig, that is 13 GPU doing nothing. Don't get me wrong, I learned a lot from that 13GPU project, it's actually a Asus B250, so has another 6 slots free, but adding in Nvidia at this stage, means shutting it down, 13x GPU doing nothing. Now, if it was unstable right now, that might be different, but it's super stable, I don't even reboot it, I was hoping for a new run-time record on it actually, but had a damn power cut last week, but it still holds the record in all my rigs, (170 hours) nonstop (until the power cut), and that is Claymore too of course, no restarts even. Anyway, good luck, and kudos on the 13GPU rig man :-)
|
KISS. Did you read the Readme.txt? Summarise/Itemise your hardware/versions/expectations/batchfile & results. The more specific, detailed, the better
|
|
|
iRrromka
Newbie
Offline
Activity: 37
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 21, 2018, 08:00:49 AM |
|
Does anyone has challenged with asrock h110 pro btc?
Hey, was this rig ever stable? To put it another way, is this a new issue, and previously this rig was stable? One thing I wanted to post on, PSUs, deserves it's own post, so check back in 30 min, I'll write it up now. Good luck btw. Yes, it was stable with 10 AMD RX. Now it's working for 14 hours. But yesterday there were 3 sudden reboots in one hour ... Of course, given payback time mining, it WAS worth it, but one can only say that with hindsight, and I've actually settled on 8GPU as a max per rig, (with 1000W PSUs), simply because I can build that up to super stable in half a day, and have a pretty high certainty it will be mining after 5 hours, and at what hash rate. The problem is, with more and more GPU per rig, down time REALLY starts to hurt more and more. Even rebooting a 13GPU rig, that is 13 GPU doing nothing. ... +100500! Even starttime for 13 GPUs is terrible:) Thx a lot and good luck to you.
|
|
|
|
iSuX
Jr. Member
Offline
Activity: 42
Merit: 8
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 21, 2018, 08:04:15 AM |
|
my Claymore's is stuck and my pool is nanopool, what the problem ? any one help? im not the only one who have this problem. thanks! ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fibb.co%2FeVNsO8&t=665&c=8AbR6PAaQMxCqg) Log File? this my log file : 08:57:41:807 1864 Check and remove old log files... 08:57:41:807 1864 args: -epool eth-asia1.nanopool.org:9999 -ewal ****/****@gmail.com -epsw x -mode 1 -ftime 10 08:57:41:807 1864 08:57:41:807 1864 ΙΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝ» 08:57:41:823 1864 Ί Claymore's Dual GPU Miner - v11.7 Ί 08:57:41:823 1864 Ί ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK Ί 08:57:41:823 1864 ΘΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΌ 08:57:41:823 1864 08:57:41:823 1864 b583 08:57:42:042 1864 ETH: 5 pools are specified 08:57:42:042 1864 Main Ethereum pool is eth-asia1.nanopool.org:9999 08:58:14:862 388 08:58:47:667 388 08:59:20:472 388 08:59:53:277 388 09:00:26:082 388 09:00:58:887 388 09:01:31:692 388 09:02:04:497 388 09:02:37:302 388 09:03:10:107 388 09:03:11:138 388 Miner cannot initialize for 5 minutes, need to restart miner! 09:03:12:747 388 Restarting OK, exit... That looks painful. Without knowing anything about your rig, hardware, os etc. Two things come to mind. 1: Set log to debug mode "-dbg 1" see if you get more clues. 2: Check your hardware. Power down, bleed down), (search for my previous post, "bleed" for explanation on that topic). Hardware Checks: Remove all GPUs except 1, see if Claymore gets further through the init. (You should be seeing it initialise OpenCL or Cuda at that point). If it were a driver issue, you'd see that "missing" and you don't, so I'm thinking your issue is more likely hardware than OS/driver, and it's not Claymore for sure. I don't know what debug will print out in this situation as I have never encountered it, but debug is certainly the very first thing you should try, because if you have a permanent fault condition, you want to gather as much data as you can, while the fault is present, BEFORE you start to change anything, or reboot etc. In terms of fault finding, permanent fault conditions are easy to track down compared to seemingly random, intermittent type issues. If you don't get any further, post a summary of your RIG spec, (look at the post from iRrromka, because his post is how you do that correctly). Good luck
|
KISS. Did you read the Readme.txt? Summarise/Itemise your hardware/versions/expectations/batchfile & results. The more specific, detailed, the better
|
|
|
iSuX
Jr. Member
Offline
Activity: 42
Merit: 8
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 21, 2018, 08:25:24 AM |
|
Does anyone has challenged with asrock h110 pro btc?
Hey, was this rig ever stable? To put it another way, is this a new issue, and previously this rig was stable? One thing I wanted to post on, PSUs, deserves it's own post, so check back in 30 min, I'll write it up now. Good luck btw. Yes, it was stable with 10 AMD RX. Now it's working for 14 hours. But yesterday there were 3 sudden reboots in one hour ... Of course, given payback time mining, it WAS worth it, but one can only say that with hindsight, and I've actually settled on 8GPU as a max per rig, (with 1000W PSUs), simply because I can build that up to super stable in half a day, and have a pretty high certainty it will be mining after 5 hours, and at what hash rate. The problem is, with more and more GPU per rig, down time REALLY starts to hurt more and more. Even rebooting a 13GPU rig, that is 13 GPU doing nothing. ... +100500! Even starttime for 13 GPUs is terrible:) Thx a lot and good luck to you. Hahahaha, Oh man, I feel your pain. Oh, one last thing, the PCIe slots on the asrock h110 pro btc are REALLY close together. One of the problems I observed was how easy it was to introduce instability by dislodging the PCIe cards in the slots. I'd start out with one problem, and introduce another because the USB3 cables can easily unseat, or rotate the PCIe cards in the slots. I decided to string them all together, as they have 1 hole in the over-hang, and I used nylon standoffs, to "bolt" all the PCIe cards into a single bank. I used these https://www.amazon.co.uk/260pcs-Black-Spacers-Stand-off-Assortment/dp/B01GVD146I/ref=sr_1_1?ie=UTF8&qid=1526890885&sr=8-1&keywords=nylon+standoffsOf course it's not quite so easy to change a failed PCIe, as you have to remove the whole bank as one, but it only adds a minute or two, and the added stability, (and chance to rule out that failure variable) is well worth it. I wonder, with the asrock h110 pro btc, the slots are SO close to each other, if it's possible for the USB socket on one PCIe card, to tip/tilt over, and short on the back of the adjacent card? Anyway, something to check, think about. Good luck.
|
KISS. Did you read the Readme.txt? Summarise/Itemise your hardware/versions/expectations/batchfile & results. The more specific, detailed, the better
|
|
|
|