Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[iSuX]

Does anyone has challenged with asrock h110 pro btc?

Hey, was this rig ever stable?
To put it another way, is this a new issue, and previously this rig was stable?

One thing I wanted to post on, PSUs, deserves it's own post, so check back in 30 min, I'll write it up now.
Good luck btw.

Yes, it was stable with 10 AMD RX. Now it's working for 14 hours. But yesterday there were 3 sudden reboots in one hour

...

Of course, given payback time mining, it WAS worth it, but one can only say that with hindsight, and I've actually settled on 8GPU as a max per rig, (with 1000W PSUs), simply because I can build that up to super stable in half a day, and have a pretty high certainty it will be mining after 5 hours, and at what hash rate.

The problem is, with more and more GPU per rig, down time REALLY starts to hurt more and more.
Even rebooting a 13GPU rig, that is 13 GPU doing nothing.

...

+100500! Even starttime for 13 GPUs is terrible:)

Thx a lot and good luck to you.

Hahahaha, Oh man, I feel your pain.
Oh, one last thing, the PCIe slots on the asrock h110 pro btc are REALLY close together.

One of the problems I observed was how easy it was to introduce instability by dislodging the PCIe cards in the slots.
I'd start out with one problem, and introduce another because the USB3 cables can easily unseat, or rotate the PCIe cards in the slots.

I decided to string them all together, as they have 1 hole in the over-hang, and I used nylon standoffs, to "bolt" all the PCIe cards into a single bank.

I used these

https://www.amazon.co.uk/260pcs-Black-Spacers-Stand-off-Assortment/dp/B01GVD146I/ref=sr_1_1?ie=UTF8&qid=1526890885&sr=8-1&keywords=nylon+standoffs

Of course it's not quite so easy to change a failed PCIe, as you have to remove the whole bank as one, but it only adds a minute or two, and the added stability, (and chance to rule out that failure variable) is well worth it.

I wonder, with the asrock h110 pro btc, the slots are SO close to each other, if it's possible for the USB socket on one PCIe card, to tip/tilt over, and short on the back of the adjacent card?

Anyway, something to check, think about.

Good luck.


 

[1714185746]

1714185746

[1714185746]

1714185746

[1714185746]

1714185746

[1714185746]

1714185746

[1714185746]

1714185746

[1714185746]

1714185746

[mumpungiso]

Claymore, first of all, thank you for all your great miners! I've been using them for a while, for various crypto currencies, but this must be the one I've been expecting the most.

[iSuX]

small bugreport:

mining didn't start if you set this two options at the same time:
-allcoins -1
-nofee 1

Did you read the readme? "-allcoins" and "nofee" section?

Some real-world advice.
If you're not going to pay for it, don't bitch about your issues!

If you don't like the rules, (see the readme), you have very clear instructions right there.
"you should find some other miner that meets your requirements, just don't use this miner instead of claiming that I need " etc etc.

You might not like it, but it's honest, and you can't say you were not informed up front, and had a choice from the start.

[haliy-2017]

The most stable driver for Nvidia 1060 6g?

[androstan1234]

Has anyone tried dualmining on 1080ti with ethlargement pill?

[iRrromka]

Has anyone tried dualmining on 1080ti with ethlargement pill?

Does this pill increase share count, not hash rate?

[john1010]

IM using windows 10 1709 build with 12 amd cards
I notice that my gpu 10 hangs opencl, I'll check all the cables and riser but all are okay, but Im using old driver.. Is my driver version is the reason why my card hang? What is the better amd driver is capable of this 11.7 version of claymore? Any help will appreciated!!

[BryanMeLee]

Well I'm very new to ubuntu, but I'm moving to it permanently now.
Honestly I'm not sure what I did to get it working eventually, a heck of a lot googling and installing packages.

from a shell:

dpkg -l libcurl4
dpkg -l libcurl3

The one that is installed will list the version.  The one that is not will simply say "<none>" for version.

Looks like only libcurl3 is installed
[/quote]

Yeah, which is a valid workaround for dedicated mining rigs.  But for a desktop, a lot of the most recent packages require libcurl4 instead.  For myself virtualbox and obs are the main conflicts.

[androstan1234]

Has anyone tried dualmining on 1080ti with ethlargement pill?

Does this pill increase share count, not hash rate?

I ran for 24 hrs and I generated more actual eth.  Can't argue with that.  Haven't tried dualmining yet, but I would think the 1080ti would be a dualmine champ.

[iSuX]

IM using windows 10 1709 build with 12 amd cards
I notice that my gpu 10 hangs opencl, I'll check all the cables and riser but all are okay, but Im using old driver.. Is my driver version is the reason why my card hang? What is the better amd driver is capable of this 11.7 version of claymore? Any help will appreciated!!

Such things can be frustrating, and the more GPUs you have, the higher probability you will see issues.
But this same probability can be turned to your advantage, as you have 9 other "stable" GPUs to compare against.

If you didn't recently change anything, or add #10, then I'd swap it with a known good GPU.
e.g. Suppose you expanded this rig, from initially starting with a single GPU, (lets call that GPU1), and added 2,3,4~10 later, and only noticed this issue after adding 11~12.

There would be 2 approaches.

Undo the last changes, (remove 11~12), and see if #10 still causes the hang.

or

Exchange the position of #10 with #1.

If you still see a hang with #10 (with #1 in the #10 bus location), you know it's probably not the GPU itself, (or the os, drivers etc etc), but something isolated to that node.
(PCIe card, USB3 cable, Raiser, PSU cables etc. Note, all of these are hardware.)

With 12 GPU, and always #10 hanging, it highly unlikely you have an OS or driver issue.
I'd strongly suggest you investigate all your hardware, or even remove #10 from the rig, (see if you then get a hang on another #).

Also, do a bleed-down power cycle, and if all this fails, (assuming all your GPU are same make/model), and you tested the above with no OC, and you still have the same hang, isolated to #10, (when moved to a different slot), you could have a bad GPU, or be overloading your PSU.

If you flashed the BIOS on #10, revert to factory BIOS for that card, default clocks, and move it to a PCI16x native slot, (remove all the riser related hw etc).

If #10 is an old GPU, and you've mined a lot with it, (check it's fans), clean it, try it in another rig would be additional suggestions.

Best of luck.

[john1010]

IM using windows 10 1709 build with 12 amd cards
I notice that my gpu 10 hangs opencl, I'll check all the cables and riser but all are okay, but Im using old driver.. Is my driver version is the reason why my card hang? What is the better amd driver is capable of this 11.7 version of claymore? Any help will appreciated!!

Such things can be frustrating, and the more GPUs you have, the higher probability you will see issues.
But this same probability can be turned to your advantage, as you have 9 other "stable" GPUs to compare against.

If you didn't recently change anything, or add #10, then I'd swap it with a known good GPU.
e.g. Suppose you expanded this rig, from initially starting with a single GPU, (lets call that GPU1), and added 2,3,4~10 later, and only noticed this issue after adding 11~12.

There would be 2 approaches.

Undo the last changes, (remove 11~12), and see if #10 still causes the hang.

or

Exchange the position of #10 with #1.

If you still see a hang with #10 (with #1 in the #10 bus location), you know it's probably not the GPU itself, (or the os, drivers etc etc), but something isolated to that node.
(PCIe card, USB3 cable, Raiser, PSU cables etc. Note, all of these are hardware.)

With 12 GPU, and always #10 hanging, it highly unlikely you have an OS or driver issue.
I'd strongly suggest you investigate all your hardware, or even remove #10 from the rig, (see if you then get a hang on another #).

Also, do a bleed-down power cycle, and if all this fails, (assuming all your GPU are same make/model), and you tested the above with no OC, and you still have the same hang, isolated to #10, (when moved to a different slot), you could have a bad GPU, or be overloading your PSU.

If you flashed the BIOS on #10, revert to factory BIOS for that card, default clocks, and move it to a PCI16x native slot, (remove all the riser related hw etc).

If #10 is an old GPU, and you've mined a lot with it, (check it's fans), clean it, try it in another rig would be additional suggestions.

Best of luck.

Thanks for the help man, It really help me a lot and saving my time to analyze where or what part of my mining rig causes the problem, yeah mining rig trouble shooting is a big challenge because there is no fix location where the problem came from. Again thanks! 

[mine_phun]

Hi guys,which coin is worth in dual mining?

Yes, but that depends on what coin you mine. XVG / XSH have both been halved, so the profit is a bit low.

Your best options according to Whattomine are:

1st : ETH + SmartCash ( Keccak )
2nd : ETH + Maxcoin ( Keccak )
3rd : ETH + Verge / Blake2s

NLPool.nl is currently the only Yiimp pool with a working Smartcash implementation, plus we have fixed the Keccak implementation on Yiimp, so no rejected shares. Also we are an autoexchange pool, so you can use an XVG or LTC wallet to mine the Smartcash or Maxcoin coins  

The only disadvantage of Keccak is that your powersupply needs to work a bit harder. It is a bit more intense then Blake2s, so not all rigs are capable of mining ..... or another option when you have 13 GPU's and limited power is to use 11 GPU's and leave 2 GPU's solo.

If you need more help we are @ Telegram > t.me/nlpool

[muzuca]

Hi guys,which coin is worth in dual mining?

Yes, but that depends on what coin you mine. XVG / XSH have both been halved, so the profit is a bit low.

Your best options according to Whattomine are:

1st : ETH + SmartCash ( Keccak )
2nd : ETH + Maxcoin ( Keccak )
3rd : ETH + Verge / Blake2s

NLPool.nl is currently the only Yiimp pool with a working Smartcash implementation, plus we have fixed the Keccak implementation on Yiimp, so no rejected shares. Also we are an autoexchange pool, so you can use an XVG or LTC wallet to mine the Smartcash or Maxcoin coins  

The only disadvantage of Keccak is that your powersupply needs to work a bit harder. It is a bit more intense then Blake2s, so not all rigs are capable of mining ..... or another option when you have 13 GPU's and limited power is to use 11 GPU's and leave 2 GPU's solo.

If you need more help we are @ Telegram > t.me/nlpool

Great! Thanks for the feedback.

[crypsy]

Hi, can someone share .bat example for etc and crea/xvg/smart

[mine_phun]

Hi, can someone share .bat example for etc and crea/xvg/smart

Sure. This one is for SmartCash if you want to mine SmartCash with a SmartCash wallet:

EthDcrMiner64.exe -epool eu1.ethermine.org:14444 -ewal (eth wallet address).(username) -epsw x -dpool stratum+tcp://mine.nlpool.nl:5133 -dwal (Smart Wallet address) -dpsw c=SMART -dcoin keccak -allpools 1 -dcri 7 -ethi 16 -gser 2 -tt 2 -asm 2 -dbg 1 -logfile 1 -r 300 -oldkernels 1

This one is for SmartCash if you want to mine SmartCash with a XVG wallet:

EthDcrMiner64.exe -epool eu1.ethermine.org:14444 -ewal (eth wallet address).(username) -epsw x -dpool stratum+tcp://mine.nlpool.nl:5133 -dwal (XVG Wallet address) -dpsw c=SMART -dcoin keccak -allpools 1 -dcri 7 -ethi 16 -gser 2 -tt 2 -asm 2 -dbg 1 -logfile 1 -r 300 -oldkernels 1

This one is for XVG if you want to mine it with a XVG wallet:

EthDcrMiner64.exe -epool eu1.ethermine.org:14444 -ewal (eth wallet address).(username) -epsw x -dpool stratum+tcp://mine.nlpool.nl:5766 -dwal (XVG Wallet address) -dpsw c=XVG -dcoin blake2s -allpools 1 -dcri 40 -ethi 16 -gser 2 -tt 2 -asm 2 -dbg 1 -logfile 1 -r 300 -oldkernels 1

Let me know if you have more questions  

Ps: For keccak with AMD 580 cards you can use -dcri 6 or 7 . If you have 570 cards, use -dcri 5 or 6.

[tg88]

finally updated to version 11.7, actually fixed issue with miner restart that was required sometimes to apply overclock settings for AMD cards.

[szczur333]

how to disable gpu while mining

I know if i press on numpad 0 1 2 3 then gpu0 gpu1 gpu2 gpu3 will be disabled

but what if i want disable gpu11 or gpu12

[buraz11]

use abcd

[tg88]

use abcd

a = gpu10
b = gpu11

that's it? 

[LearningGuy]

OVERLOAD!

Background:
In the early days of my mining project, I had managed to get 2 rigs stable.
They were built in succession, so the RIG1 had been running non-stop for some 7~8 weeks, ahead of RIG2.

These rigs used a few different PSUs, all Corsair 1000W, RM1000x, HX1000, HX1000i.

At about the 3 month point, RIG1, hit a bump, "random" reboot, (it's was running a USB watchdog, so I was unsure if this was the trigger, and disabled it for testing purposes), equally, event logs only mentioned kernel power, which is pretty vague.
Fortunately, things went downhill fast, and I stripped the rig down for inspection.

Cutting to the chase here, the problem was traced to the SATA/Peripheral 6pin plug on the PSU itself.
In this case, the connector was melted on the 12V pin, the pin welded into the cables socket, and all the insulation crumbled on the plug/socket, and melted some 2cm up the wire itself.

Now, I had failed to appreciate a number of things, and these are worth sharing.
The plugs are rated 10A, but in reality, one should not assume to work anywhere close to that "limit" for 24/7 operation.
Usually about half that is a safe maximum.

Why I didn't pay attention to a glaringly obvious stupidity on the part of Corsair is my own fault.

The Corsair, (and cables of all the PSU vendors for that matter), all have 4 Molex connectors in parallel. Now each Molex is rated to 10A, so how can one expect to pull half that, x4, (20A) through a single 10A plug/socket on the PSU?
Or if you want kindergarten logic, pull 4x 10A (molex) (40A) through a single 10A outlet?

I had stupidly assumed the PCIe risers were mostly inert, as power would in the whole come direct to the GPU.
WRONG!

In all cases I had used all 4 of those cable headers, whether those be molex or SATA power, and in all cases there were clear signs or damage after 3 months. (<2 months on rig2!)

I've rewired all my rigs, maximum 2 devices (PCIe risers, SSD, relay, fan-banks) per cable.

The Corsair PSU in all cases failed to trip safety cutouts, at least the HX1000i didn't log that it had, the RM1000x and HX1000, have no datalink so maybe they did, I have no way to tell.
But equally, this kind of failure is unlikely to cause a trip out, because the PSU is actually delivering LESS power, as current flow is inhibited by the degrading plug/socket!

I shipped 3 PSU back to Corsair.

Signs to look for.
Has a previously stable rig, become unstable, and you didn't change anything, drivers, hardware, etc?
Do you have more than 2 devices on a single power cable?

Checks/Inspections
Power off all PSUs, remove AC plugs, then remove the cable-sockets from the PSU outlet plugs.
Inspect the pins in the PSU outlet plugs.

Warning signs include: Pins no longer shiny/silver/gold, but dull, oxidised, black or burned.
Gently flex the cable near the FAR end of the cable, (farthest from the PSU), this should give you a feel for GOOD cable flex, (normal for THAT cable). Now repeat that flex-test at the other end of the cable, (right where it comes out of the PSU plug).
If you feel less flex, or it could be like a solid rod, no flex, that is a clear sign of overload.

This is a vicious cycle, as you overload, the wires heat up, they expand and abraid on each other, and oxidise. They do this more, right next to any connection, because there is a break in the insulation, allowing the ingress of air, and the oxygen component accelerates the oxidisation. The cables loose flexibility because of this, and also heat up more, accelerating their demise, in extreme cases this will melt away the wire insulation, and even the plug/socket.
If there was ANY human element during manufacture, (skin oils on the wires during handling, crimping, poor stripping, stand damage, poor crimping, bruising), these will drastically increase the likelihood of failure, especially if you pull more current through them.

ALL these signs were present on all my RIGs!!!

All have been rewired 2 PCIe risers per power cable, and 6 weeks on, all reinspected and there were no signs of degradation. A further inspection was done 2 months later, and again there were no signs of overload.

I have a feeling there will be MANY miners out there, who didn't give much thought to plug/socket ratings, and trusted the vendors would be using safe practice, WRONG!

Think: National Lampoons Christmas Vacation, (the Christmas lights scenes), because Evga, Corsair, and all the other vendors are shipping time bomb cables, and NO WARNINGS on them, or the PSU manuals.

Using 3 of the 4 headers might be ok, I opted for maximum of 2, because this is standard/safe practise in situations like this.


REPEAT:
Signs to look for.
Has a previously stable rig, become unstable, and you didn't change anything, drivers, hardware, etc?
Do you have more than 2 devices on a single power cable?

Finally: Don't jump to conclusions about Claymore or OS, or drivers, until you're satisfied the hardware is OK!


Good luck everyone.

Sorry to rehash the whole post, but damn I wish you had posted this two months ago - i spent weeks and plenty cash changing so many components only to find them burnt on the SATA connections on the psu port. We always look at risers etc but the real cost here is psu as they cost the same as a gpu and it isn’t safe based on this principle on a 6 card rig anymore. Cheers iSux- thanks for sharing