brentkhack
Newbie
Offline
Activity: 1
Merit: 0
|
|
June 25, 2019, 09:36:13 PM |
|
Windows 10 and new XFX 580 8GB card. I have updated the OS and AMD drivers. Trying to run the install I get this info from the log: Check and remove old log files... 16:21:52:637 494 args: -epool us1.ethpool.org:3333 -ewal -mode 1 -tt 70 -rxboost 1 -lidag 0 setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 16:21:52:639 494 16:21:52:640 494 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» 16:21:52:642 494 º Claymore's Dual GPU Miner - v14.7 º 16:21:52:643 494 º ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK º 16:21:52:646 494 º Supercharged Edition º 16:21:52:647 494 ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ 16:21:52:649 494 16:21:52:651 494 b745 16:21:52:853 494 ETH: 1 pool is specified 16:21:52:858 494 Main Ethereum pool is us1.ethpool.org:3333 16:21:53:093 494 OpenCL platform: AMD Accelerated Parallel Processing 16:21:53:098 494 OpenCL initializing...
16:21:53:101 494 AMD Cards available: 1 16:21:53:103 494 GPU #0: Ellesmere (Radeon RX 580 Series), 8192 MB available, 36 compute units (pci bus 1:0:0) 16:21:53:105 494 GPU #0 recognized as Radeon RX 480/580 16:21:53:107 494 POOL/SOLO version 16:21:53:109 494 Platform: Windows 16:21:53:284 494 start building OpenCL program for GPU 0... 16:21:53:939 494 done 16:21:54:189 494 GPU #0: algorithm ASM 1 16:21:54:193 494 cudaGetDeviceCount failed (35, CUDA driver version is insufficient for CUDA runtime version), probably no CUDA devices 16:21:54:196 494 No NVIDIA CUDA GPUs detected. 16:21:54:199 494 Total cards: 1 16:21:54:202 494 Please consider using "-strap" option to increase mining speed, check Readme for details.
16:21:58:205 494 You can use "+" and "-" keys to achieve best ETH speed, see "FINE TUNING" section in Readme for details.
16:21:59:207 494 No NVIDIA cards in the list, NVML library will not be used. 16:21:59:209 494 Driver is not installed! Trying to install it... 16:21:59:222 494 Driver is in use, try to start miner with "-driver uninstall" parameter. 16:22:00:443 494 SSL: Imported 47 certificates from local storage 16:22:00:491 259c ETH: Stratum - connecting to 'us1.ethpool.org' <172.65.229.54> port 3333 (unsecure) 16:22:00:525 259c sent: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["0x6aacd0c259bD5496205a4018f91deDf028281fFb", ""], "id": 2, "method": "eth_submitLogin"}
16:22:00:528 259c ETH: Stratum - Connected (us1.ethpool.org:3333) (unsecure) 16:22:00:546 494 ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
16:22:00:552 494 ETH: eth-proxy stratum mode 16:22:00:555 494 Watchdog enabled 16:22:00:558 494 Remote management (READ-ONLY MODE) is enabled on port 3333 16:22:00:562 494
16:22:00:567 494 You did not specify -dcri values directly, so they will be detected automatically 16:22:00:571 494 Automatic detection of best -dcri values started, please wait...
16:22:00:640 259c buf: {"id":2,"jsonrpc":"2.0","result":true}
16:22:00:642 259c ETH: Authorized 16:22:00:644 259c sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
16:22:00:726 259c buf: {"id":0,"jsonrpc":"2.0","result":["0xfdf2fae80b46091d061159bfb20b05b722be62f1203f9bfe8eec4dec4fa15187","0x419e0d426d7007dadfc87e69afc4a36bcc31930b529e3df47d4e769a272c8975","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x7a8567"]}
16:22:00:760 d9c Setting DAG epoch #267... 16:22:01:889 26b0 GPU 0 temp = 39, old fan speed = 0, new fan speed = 70
16:22:03:343 259c buf: {"id":0,"jsonrpc":"2.0","result":["0x5325836e155801a639c99e2c3b8e0d063818d9878012201240a6834dcfecaed3","0x419e0d426d7007dadfc87e69afc4a36bcc31930b529e3df47d4e769a272c8975","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x7a8567"]}
16:22:03:349 259c ETH: 06/25/19-16:22:03 - New job from us1.ethpool.org:3333 16:22:03:352 259c target: 0x0000000112e0be82 (diff: 4000MH), epoch 267(3.09GB) 16:22:03:356 259c ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 16:22:03:359 259c ETH: GPU0 0.000 Mh/s 16:22:04:899 26b0 GPU 0 temp = 39, old fan speed = 0, new fan speed = 55
16:22:05:322 d9c Setting DAG epoch #267 for GPU0 16:22:05:325 d9c Create GPU buffer for GPU0 16:22:05:336 d9c GPU0 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU 16:22:05:339 d9c GPU0 - OpenCL error -4 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
16:22:07:326 259c buf: {"id":0,"jsonrpc":"2.0","result":["0xaa433c45529b0edfa43d7d6065da808cfdd2b6a1b9962a977e10f24b51a30c67","0x419e0d426d7007dadfc87e69afc4a36bcc31930b529e3df47d4e769a272c8975","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x7a8567"]}
16:22:07:328 259c ETH: 06/25/19-16:22:07 - New job from us1.ethpool.org:3333 16:22:07:333 259c target: 0x0000000112e0be82 (diff: 4000MH), epoch 267(3.09GB) 16:22:07:336 259c ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 16:22:07:339 259c ETH: GPU0 0.000 Mh/s 16:22:07:909 26b0 GPU 0 temp = 39, old fan speed = 0, new fan speed = 40
16:22:08:341 d9c Set global fail flag, failed GPU0 16:22:08:344 d9c GPU 0 failed 16:22:08:346 1eb0 Setting DAG epoch #267 for GPU0 16:22:08:349 1eb0 GPU0, OpenCL error -38 - cannot write buffer for DAG
16:22:10:739 259c ETH: checking pool connection... 16:22:10:741 259c sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
16:22:10:826 259c buf: {"id":0,"jsonrpc":"2.0","result":["0xaa433c45529b0edfa43d7d6065da808cfdd2b6a1b9962a977e10f24b51a30c67","0x419e0d426d7007dadfc87e69afc4a36bcc31930b529e3df47d4e769a272c8975","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x7a8567"]}
16:22:10:893 1b8c GPU 0 temp = 37, old fan speed = 0, new fan speed = 25
16:22:10:999 1b8c Quit, please wait... 16:22:11:352 1eb0 Set global fail flag, failed GPU0 16:22:11:356 1eb0 GPU 0 failed
I took out my ewal number. What am I missing? Thank you.
|
|
|
|
RuMiner
Member
Offline
Activity: 168
Merit: 15
|
|
June 25, 2019, 09:54:56 PM |
|
Please add DAG epoch number in API responce. Yes. Please!!! And add best intensities found in auto tuning mode. @Claymore, if you really want to add all that, please add a choice of what to show in web interface - there's too much data already (
|
|
|
|
Marvell2
|
|
June 25, 2019, 10:15:26 PM |
|
Still crashes on Vega 56
|
|
|
|
jovanminer
Newbie
Offline
Activity: 1
Merit: 0
|
|
June 26, 2019, 11:47:59 AM |
|
My antivirus removed the file as soon as it was available. So ill keep off until some more comments are available i also got the Win32/Uwamson.A!ml Trojan horse virus.
|
|
|
|
greasepit
Newbie
Offline
Activity: 28
Merit: 1
|
|
June 26, 2019, 01:58:05 PM |
|
I got some improve on my hash rate speed. Before it usually used to work at 177Mh/s and now 188Mh/s. I did the same config for the 3 rigs I have and the total gain was 30Mh/s it is like I have gotten another GPU However I'm gonna monitor my graph on the pool and see if I really had some gain... Let's see!! https://i.ibb.co/9WY90LR/cm147.png- 17 Cards are Asus Radeon RX 580 OC 4GB - samsung memory - 1 Card is Asus Radeon RX 580 OC 4GB - elpida memory For me -strap and -rxboost were waste of time. They really increased the hash rate, but I was getting too much: "GPU #0 got incorrect share. If you see this warning often, make sure you did not overclock it too much!"So the hash rate reported by the pool decreased a little. I was using: -strap 2 -rxboost 21 And undervolting and overclocking with OverDriveNTool -cvddc 870 -mvddc 850 -cclock 1170 -mclock 2010
|
|
|
|
SilverDesert
Jr. Member
Offline
Activity: 50
Merit: 11
|
|
June 26, 2019, 03:48:26 PM |
|
Hi,
What is the latest Dev fee for v14.7?
|
|
|
|
Er0l
Newbie
Offline
Activity: 36
Merit: 0
|
|
June 27, 2019, 06:58:54 AM |
|
I got some improve on my hash rate speed. Before it usually used to work at 177Mh/s and now 188Mh/s. I did the same config for the 3 rigs I have and the total gain was 30Mh/s it is like I have gotten another GPU However I'm gonna monitor my graph on the pool and see if I really had some gain... Let's see!! https://i.ibb.co/9WY90LR/cm147.png- 17 Cards are Asus Radeon RX 580 OC 4GB - samsung memory - 1 Card is Asus Radeon RX 580 OC 4GB - elpida memory For me -strap and -rxboost were waste of time. They really increased the hash rate, but I was getting too much: "GPU #0 got incorrect share. If you see this warning often, make sure you did not overclock it too much!"So the hash rate reported by the pool decreased a little. I was using: -strap 2 -rxboost 21 And undervolting and overclocking with OverDriveNTool -cvddc 870 -mvddc 850 -cclock 1170 -mclock 2010 Too much undervolt for memory... dont touch memory voltage at all
|
|
|
|
SilverDesert
Jr. Member
Offline
Activity: 50
Merit: 11
|
|
June 27, 2019, 12:09:33 PM |
|
Hi,
What is the latest Dev fee for v14.7?
This miner is free-to-use, however, current developer fee is 1%, every hour the miner mines for 36 seconds for developer. For all 2GB cards and 3GB cards devfee is 0%, so on these cards you can mine all ETH forks without devfee, this miner is completely free in this case. If some cards are 2...3GB and some >3GB, 2...3GB cards still mine for you during devfee time, only cards that have more than 3GB memory will be used for devfee mining. Miner displays appropriate messages during startup. Second coin (Decred/Siacoin/Lbry/Pascal/Blake2s/Keccak) is mined without developer fee. So the developer fee is 0...1%, if you don't agree with the dev fee - don't use this miner, or use "-nofee" option. Attempts to cheat and remove dev fee will cause a bit slower mining speed (same as "-nofee 1") though miner will show same hashrate. Miner cannot just stop if cheat is detected because creators of cheats would know that the cheat does not work and they would find new tricks. If miner does not show any errors or slowdowns, they are happy. Thank you
|
|
|
|
UnclWish
|
|
June 27, 2019, 01:26:49 PM |
|
I got some improve on my hash rate speed. Before it usually used to work at 177Mh/s and now 188Mh/s. I did the same config for the 3 rigs I have and the total gain was 30Mh/s it is like I have gotten another GPU However I'm gonna monitor my graph on the pool and see if I really had some gain... Let's see!! - 17 Cards are Asus Radeon RX 580 OC 4GB - samsung memory - 1 Card is Asus Radeon RX 580 OC 4GB - elpida memory For me -strap and -rxboost were waste of time. They really increased the hash rate, but I was getting too much: "GPU #0 got incorrect share. If you see this warning often, make sure you did not overclock it too much!"So the hash rate reported by the pool decreased a little. I was using: -strap 2 -rxboost 21 And undervolting and overclocking with OverDriveNTool -cvddc 870 -mvddc 850 -cclock 1170 -mclock 2010 Too much undervolt for memory... dont touch memory voltage at all It's not too much. It depends on memory and card quality. I have Sapphire RX 580 8Gb card with Hynix memory that mines ethereum on 2250MHz with mvddc 800 without memory errors. He needs try to raise both voltages a bit. F.e., 1st try to set cvddc 900 and leave mvddc 850. If incorrect shares stays than try to set cvddc - 875 and mvddc 875. P.S. 870mV - not correct voltage. As I know on RX cards cvddc must be step by 6 or 7 mV (25/4). Correct voltages are 800, 806, 812, 818, 825, 831, 837, 843, 850, 856, 863, 868, 875, etc. Memory voltages is step by 25 - 800, 825, 850, 875. etc. I tried to set other values for cvddc but all monitoring utils shows close voltages to setted. If set 870 mV - it will be 868 or 875 but not 870.
|
|
|
|
Solovey4ik
Newbie
Offline
Activity: 28
Merit: 0
|
|
June 27, 2019, 02:18:38 PM |
|
Hi all, geting about 11-13 mh , 488 card letest drivers , any idea ?
|
|
|
|
UnclWish
|
|
June 27, 2019, 02:36:58 PM |
|
Hi all, geting about 11-13 mh , 488 card letest drivers , any idea ?
Press "Y" key during mining and than restart computer.
|
|
|
|
Carlorco
Newbie
Offline
Activity: 7
Merit: 0
|
|
June 27, 2019, 05:49:57 PM |
|
Hi guys i have a issue with my 13 gpus rig running claymore 14.7, when i apply -strap to the 1st and 2nd card everything fine but when i tried to apply to the 3rd or any next windows crash bsod "system service exception" i tried everything i tested the gpus on another rig i have a asrock h110 btc pro, i tried new drivers new windows please help
|
|
|
|
darkCryptoMiner
Newbie
Offline
Activity: 30
Merit: 0
|
|
June 27, 2019, 05:57:22 PM |
|
Hi guys i have a issue with my 13 gpus rig running claymore 14.7, when i apply -strap to the 1st and 2nd card everything fine but when i tried to apply to the 3rd or any next windows crash bsod "system service exception" i tried everything i tested the gpus on another rig i have a asrock h110 btc pro, i tried new drivers new windows please help
I had the same.issue..didn't solve it - went another route, but the documentation says that some straps at higher memory.clocks crash. Did you try low clocks on failing cards with each of the different straps? If not, try that and work your way up till crash.
|
|
|
|
Carlorco
Newbie
Offline
Activity: 7
Merit: 0
|
|
June 27, 2019, 11:59:23 PM |
|
Hi guys i have a issue with my 13 gpus rig running claymore 14.7, when i apply -strap to the 1st and 2nd card everything fine but when i tried to apply to the 3rd or any next windows crash bsod "system service exception" i tried everything i tested the gpus on another rig i have a asrock h110 btc pro, i tried new drivers new windows please help
I had the same.issue..didn't solve it - went another route, but the documentation says that some straps at higher memory.clocks crash. Did you try low clocks on failing cards with each of the different straps? If not, try that and work your way up till crash. Yes i tried stock memory clock i tried another gpu bios i tried stock bios i tried all the straps - strap 1 2 3 4 5 6 seem to be when the miner is identifying the card for example I see the line POL8S1 POL8S2 And crash Seem to be a problem with the motherboard because i have another rigs with the same gpu but the motherboard is asus And works perfect i tried upgrading the motherboard bios And the same issue, however without the - strap works perfect Testing 12* rx 580 xfx on asrock h110 btc pro+
|
|
|
|
xmonkx
Newbie
Offline
Activity: 8
Merit: 0
|
|
June 28, 2019, 05:08:36 AM |
|
So do I. My rig with Asrock h110 btc pro+ does get stuck and reboot when claymore try to apply mem strap to 3rd gpu. However, rig with Asus BTC+ 19 pcie works fine with strap. Hi guys i have a issue with my 13 gpus rig running claymore 14.7, when i apply -strap to the 1st and 2nd card everything fine but when i tried to apply to the 3rd or any next windows crash bsod "system service exception" i tried everything i tested the gpus on another rig i have a asrock h110 btc pro, i tried new drivers new windows please help
I had the same.issue..didn't solve it - went another route, but the documentation says that some straps at higher memory.clocks crash. Did you try low clocks on failing cards with each of the different straps? If not, try that and work your way up till crash. Yes i tried stock memory clock i tried another gpu bios i tried stock bios i tried all the straps - strap 1 2 3 4 5 6 seem to be when the miner is identifying the card for example I see the line POL8S1 POL8S2 And crash Seem to be a problem with the motherboard because i have another rigs with the same gpu but the motherboard is asus And works perfect i tried upgrading the motherboard bios And the same issue, however without the - strap works perfect Testing 12* rx 580 xfx on asrock h110 btc pro+
|
|
|
|
big_daddy
|
|
June 28, 2019, 07:12:57 AM |
|
I got some improve on my hash rate speed. Before it usually used to work at 177Mh/s and now 188Mh/s. I did the same config for the 3 rigs I have and the total gain was 30Mh/s it is like I have gotten another GPU However I'm gonna monitor my graph on the pool and see if I really had some gain... Let's see!! - 17 Cards are Asus Radeon RX 580 OC 4GB - samsung memory - 1 Card is Asus Radeon RX 580 OC 4GB - elpida memory For me -strap and -rxboost were waste of time. They really increased the hash rate, but I was getting too much: "GPU #0 got incorrect share. If you see this warning often, make sure you did not overclock it too much!"So the hash rate reported by the pool decreased a little. I was using: -strap 2 -rxboost 21 And undervolting and overclocking with OverDriveNTool -cvddc 870 -mvddc 850 -cclock 1170 -mclock 2010 your vents won't last long on ~100% fan speed it's better to install some additional vents for a decent airflow on your rig something like this ->
|
If you don't believe it or don't get it, I don't have the time to try to convince you, sorry.
|
|
|
ShyvHX
Newbie
Offline
Activity: 11
Merit: 0
|
|
June 28, 2019, 05:48:12 PM |
|
Using -strap results in the following error and straps not being applied:
Wrong driver version, trying to uninstall it and install correct version... The boot configuration data store could not be opened. Acces is denied. Failed, you must run miner with admin rights.
When I run claymore as admin I get the following error: ethdcrminer64.exe' is not recognized as an internal or external command
Miner works just fine when ran normaly except that I cant use -strap / -rxboost. Installed latest gpu drivers but it still doesnt work.
|
|
|
|
McFast
Newbie
Offline
Activity: 5
Merit: 0
|
|
June 28, 2019, 08:08:07 PM |
|
Testing 12* rx 580 xfx on asrock h110 btc pro+
I have same configurations asrocks with xfx 580, 570 and sapphire 580. all *12. and they are crashing. I'm using on these rigs rxboost on asus z270p with p106-100*8 strap works, but I have another problem on that rig. i can use Nvidia driver 382.53 and miner 10.6, when i upgrade drivers or miners to 11.x or 14.x - mining stops after 10-20 minutes
|
|
|
|
jeremyismer
Newbie
Offline
Activity: 55
Merit: 0
|
|
June 29, 2019, 12:51:01 AM |
|
Hi guys,
I've been using Claymore for a number of years through various versions. But I have recently noticed with the recent releases that after a day or so of mining my effective rate starts to drops off (the reported hashrate is fine). The effective is often around 10% lower than reported. If I restart the miner my effective rate promptly shoots back up to reported quickly until another day or so then drops off. The recovery is almost immediate.
I get the recovery if I just restart Claymore but a computer restart also does it (i.e. it is a restart of Claymore that is fixing it, not the computer restart).
Has anyone encountered this?
I'm running 14.6, a bunch of RXs, Win10, latest Radeon drivers, compute mode, using my own straps (I couldn't get any better using the rxboost, etc.). Nothing is running too hot.
Thanks
|
|
|
|
0xcosmos
|
|
June 29, 2019, 06:51:45 AM |
|
Using -strap results in the following error and straps not being applied:
Wrong driver version, trying to uninstall it and install correct version... The boot configuration data store could not be opened. Acces is denied. Failed, you must run miner with admin rights.
When I run claymore as admin I get the following error: ethdcrminer64.exe' is not recognized as an internal or external command
Miner works just fine when ran normaly except that I cant use -strap / -rxboost. Installed latest gpu drivers but it still doesnt work.
right click claymore exe then properties and tick run as administrator now execute the bat file and it should run without any problems
|
|
|
|
|