dan991199
Newbie
Offline
Activity: 11
Merit: 0
|
|
September 09, 2017, 06:52:25 PM |
|
this may have been asked, but I can't seem to find it.
I know nvoc is made for the 10 series cards but has anyone tried 970's or 980's ?
|
|
|
|
gdemon
Newbie
Offline
Activity: 4
Merit: 0
|
|
September 09, 2017, 08:49:59 PM |
|
Hi Help or assist to understand with a problem. when starting this error / home / m1 / 3main: line 53: nvidia-smi: command not found
rig IP: 192.168.1.3
rig MAC: 70: 85: c2: 49: 78: 44
01: 00.0 VGA compatible controller: NVIDIA Corporation Device 1b06 (rev a1) 07: 00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1) 08: 00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
/ home / m1 / 3main: line 144: nvidia-smi: command not found
Thu Sep 7 13:54:01 EDT 2017 Action: Installing daemon (12.0.76279) for 'systemd' ... installing /etc/systemd/system/teamviewerd.service (/opt/teamviewer/tv_bin/script/teamviewerd.service) Try: systemctl enable teamviewerd.service systemctl start teamviewerd.service
[WARN] Unable to load the library libutempter! [WARN] The <wall> command will not work in guake! [WARN] libutempter.so.0: can not open shared object file: No such file or directory
LAUNCHING: IAmNotAJeep_and_Maxximus007_WATCHDOG
process in screen wdog; attach with: screen -r wdog
LAUNCHING: Maxximus007_AUTO_TEMPERATURE_CONTROL
process in screen temp; attach with: screen -r temp
/ home / m1 / 3main: line 450: [: NO: integer expression expected / home / m1 / 3main: line 455: nvidia-smi: command not found
ERROR: Error querying enabled displays on GPU 0 (Missing Extension).
ERROR: Error querying connected displays on GPU 0 (Missing Extension).
ERROR: Error resolving target specification 'gpu: 0' (No targets match target specification), specified in assignment '[gpu: 0] / GPUGraphicsClockOffset [3] = 50'.
ERROR: Error querying enabled displays on GPU 0 (Missing Extension).
ERROR: Error querying connected displays on GPU 0 (Missing Extension).
ERROR: Error resolving target specification 'gpu: 0' (No targets match target specification), specified in assignment '[gpu: 0] / GPUMemoryTransferRateOffset [3] = 200'.
/ home / m1 / 3main: line 877: [: ==: unary operator expected / home / m1 / 3main: line 883: [: ==: unary operator expected / home / m1 / 3main: line 891: [: ==: unary operator expected / home / m1 / 3main: line 901: [: ==: unary operator expected / home / m1 / 3main: line 913: [: ==: unary operator expected / home / m1 / 3main: line 927: [: ==: unary operator expected / home / m1 / 3main: line 943: [: ==: unary operator expected / home / m1 / 3main: line 961: [: ==: unary operator expected / home / m1 / 3main: line 981: [: ==: unary operator expected / home / m1 / 3main: line 1003: [: ==: unary operator expected / home / m1 / 3main: line 1027: [: ==: unary operator expected / home / m1 / 3main: line 1053: [: ==: unary operator expected / home / m1 / 3main: line 1081: [: ==: unary operator expected
LAUNCHING: Mining Process
process in screen miner; attach with: screen -r miner
please help me Is integrated GPU disabled And did you connect monitor to GTX GPU on first boot ! Also try to run these commands : sudo apt update sudo apt install nvidia-384 reboot, see if it fixed or not. http://joxi.ru/8AngvRtjEdxzrOdid as they said. does not work. no nvidia-smi command
|
|
|
|
kk003
Member
Offline
Activity: 117
Merit: 10
|
|
September 09, 2017, 08:56:02 PM Last edit: September 09, 2017, 11:01:41 PM by kk003 |
|
this may have been asked, but I can't seem to find it.
I know nvoc is made for the 10 series cards but has anyone tried 970's or 980's ?
New rig with 3 1060 and 2 970 oc. The 970s give around 15Mh/s minig etc, but they used to give 19+Mh/s in windows running nicehash and daggerhashimoto. I think they need a different way for OC. Tomorrow I'll try this: https://bitcointalk.org/index.php?topic=1854250.msg20077635#msg20077635
|
|
|
|
jotun
Newbie
Offline
Activity: 11
Merit: 0
|
|
September 09, 2017, 09:13:09 PM |
|
this may have been asked, but I can't seem to find it.
I know nvoc is made for the 10 series cards but has anyone tried 970's or 980's ?
tested nvOC on my PC that has a gtx 970, I get 290-300 Sols/s
|
|
|
|
kk003
Member
Offline
Activity: 117
Merit: 10
|
|
September 09, 2017, 09:30:42 PM |
|
this may have been asked, but I can't seem to find it.
I know nvoc is made for the 10 series cards but has anyone tried 970's or 980's ?
tested nvOC on my PC that has a gtx 970, I get 290-300 Sols/s Could you test any etx alg and report here please?
|
|
|
|
dan991199
Newbie
Offline
Activity: 11
Merit: 0
|
|
September 10, 2017, 01:27:46 AM |
|
i recently switched from eth_dcr to eth_sc and noticed my eth hashrate has dropped by about 1.5MH per card. is this normal for the switch? or is it likely that this loss can be re-gained with some tweaking?
|
|
|
|
Bibi187
Full Member
Offline
Activity: 420
Merit: 106
https://steemit.com/@bibi187
|
|
September 10, 2017, 01:33:14 AM Last edit: September 10, 2017, 02:51:08 PM by Bibi187 |
|
i recently switched from eth_dcr to eth_sc and noticed my eth hashrate has dropped by about 1.5MH per card. is this normal for the switch? or is it likely that this loss can be re-gained with some tweaking?
That prolly come from default -dcri value You can easily test it on your miner type "-" or "+" to adjust it. Lower value on -dcri mean more power for eth.
|
|
|
|
dan991199
Newbie
Offline
Activity: 11
Merit: 0
|
|
September 10, 2017, 03:10:47 AM |
|
i recently switched from eth_dcr to eth_sc and noticed my eth hashrate has dropped by about 1.5MH per card. is this normal for the switch? or is it likely that this loss can be re-gained with some tweaking?
That prolly come from default -dcri value You can easily test it how your miner type "-" or "+" to adjust it. Lower value on -dcri mean more power for eth. thanks! second question... 1st time using nanopool on nvoc, any idea where i set my email?
|
|
|
|
wi$em@n
Newbie
Offline
Activity: 46
Merit: 0
|
|
September 10, 2017, 05:32:04 AM |
|
second question... 1st time using nanopool on nvoc, any idea where i set my email?
Set it here: home/m1/1bash: ETH_WORKER="$WORKERNAME /your@email.here"
|
|
|
|
mark949
Newbie
Offline
Activity: 42
Merit: 0
|
|
September 10, 2017, 06:52:15 AM |
|
Hi guys! I wanted to try your operating system in the mining, but the first START OS is not successful. ERROR: " invalid arch independent elf magic" https://snag.gy/vEncY1.jpgI tried with 1 card, and changed all the settings in the BIOS. Motherboard: Asus Prime Z270-P Video Cards: GTX 1060 6G RAM: DDR4 16G SSD 60 G I need help!! Please help me!!!
|
|
|
|
Hostels
Newbie
Offline
Activity: 31
Merit: 0
|
|
September 10, 2017, 07:39:45 AM |
|
Guys i connect to my rig via SSH. How to kill miner process. I want to update claymore 10.0
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
September 10, 2017, 07:48:37 AM |
|
Guys i connect to my rig via SSH. How to kill miner process. I want to update claymore 10.0
If you just want to kill miner and restart it via watchdog (miner will be restart via wdog in about 70 seconds): If you want to kill miner, wdog, temp and restart 3main : pkill -e screen && pkill -f 3main && bash 3main & press enter when 3main loaded and no more info posted on screen (dont ctrl+c)
|
|
|
|
Hostels
Newbie
Offline
Activity: 31
Merit: 0
|
|
September 10, 2017, 08:07:34 AM |
|
Guys i connect to my rig via SSH. How to kill miner process. I want to update claymore 10.0
If you just want to kill miner and restart it via watchdog (miner will be restart via wdog in about 70 seconds): If you want to kill miner, wdog, temp and restart 3main : pkill -e screen && pkill -f 3main && bash 3main & press enter when 3main loaded and no more info posted on screen (dont ctrl+c) I update it(delete all files in 9_8 directory, then copy to 9_8 10.0 files). reboot and miner not start(
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
September 10, 2017, 08:24:23 AM Last edit: September 10, 2017, 09:11:26 AM by papampi |
|
As you all may noticed, so many pools have been hacked and gone down some may come back and some dont @fullzero and @damNmad I have been working on a way so we can add reserve pools via config files instead of in line configs. So if these things happened again our mining wont stuck in boot loop. My servers had 25 boots before I wake up and change server when zpool went down 2 days ago. I made some changes to my 1bash and 3main for the coins I use most. If you want I can do it for all coins for the next version update. Here is the example for zec 1bash: ZEC_ADDRESS="t_your_zec_wallet_address" EWBF_VERSION="3_4" # choose 3_3 or 3_4
ZEC_ADDRESS=$ZEC_ADDRESS ZEC_WORKER="$WORKERNAME" ZEC_POOL="us1-zcash.flypool.org" ZEC_PORT="3333"
ZEC_ADDRESS_1=$ZEC_ADDRESS ZEC_WORKER_1="$WORKERNAME/your@email_for_nanopool" ZEC_POOL_1="zec-eu1.nanopool.org" ZEC_PORT_1="6666"
ZEC_ADDRESS_2="suprnova_username" ZEC_WORKER_2="$WORKERNAME" ZEC_POOL_2="zec-us.suprnova.cc" ZEC_PORT_2="2142"
3main: if [ $COIN == "ZEC" ] then if [ $EWBF_VERSION == "3_3" ] then HCD='/home/m1/zec/v3_3/miner' fi if [ $EWBF_VERSION == "3_4" ] then HCD='/home/m1/zec/v3_4/miner' fi MINER_CFG="/home/m1/miner_configs/zec.cfg" screen -dmS miner $HCD --config $MINER_CFG; if [ $LOCALorREMOTE == "LOCAL" ] then screen -r miner fi BITCOIN="theGROUND" while [ $BITCOIN == "theGROUND" ] do sleep 60 done fi /home/m1/miner_configs/zec.cfg: source ~/1bash ######################################################################### ######################################################################### ######################################################################### ######################################################################### # Common parameters [common] templimit 90 pec 1 boff 0 eexit 3 tempunits c log 0 logfile miner.log api 127.0.0.1:42000 fee 0 # The miner start work from this server # When the server is fail, the miner will try to reconnect 3 times # After three unsuccessful attempts, the miner will switch to the next server # You can add up to 8 servers # main server [server] server $ZEC_POOL port $ZEC_PORT user $ZEC_ADDRESS.$ZEC_WORKER pass x # additional server 1 [server] server $ZEC_POOL_1 port $ZEC_PORT_1 user $ZEC_ADDRESS_1.$ZEC_WORKER_1 pass x #additional server 2 [server] server $ZEC_POOL_2 port $ZEC_PORT_2 user $ZEC_ADDRESS_2.$ZEC_WORKER_2 pass x Let me know if these are ok, or I need to change/add anything so I make it for all coins
|
|
|
|
matrix17
Newbie
Offline
Activity: 2
Merit: 0
|
|
September 10, 2017, 09:24:35 AM |
|
Guys i connect to my rig via SSH. How to kill miner process. I want to update claymore 10.0
If you just want to kill miner and restart it via watchdog (miner will be restart via wdog in about 70 seconds): If you want to kill miner, wdog, temp and restart 3main : pkill -e screen && pkill -f 3main && bash 3main & press enter when 3main loaded and no more info posted on screen (dont ctrl+c) I update it(delete all files in 9_8 directory, then copy to 9_8 10.0 files). reboot and miner not start( Try changing the permission of ethdcrminer64 file because I need to do it in mine to be able to run it. chmod a+x /home/m1/eth/9_8/ethdcrminer64
|
|
|
|
Hostels
Newbie
Offline
Activity: 31
Merit: 0
|
|
September 10, 2017, 10:35:32 AM |
|
Guys i connect to my rig via SSH. How to kill miner process. I want to update claymore 10.0
If you just want to kill miner and restart it via watchdog (miner will be restart via wdog in about 70 seconds): If you want to kill miner, wdog, temp and restart 3main : pkill -e screen && pkill -f 3main && bash 3main & press enter when 3main loaded and no more info posted on screen (dont ctrl+c) I update it(delete all files in 9_8 directory, then copy to 9_8 10.0 files). reboot and miner not start( Try changing the permission of ethdcrminer64 file because I need to do it in mine to be able to run it. chmod a+x /home/m1/eth/9_8/ethdcrminer64 THANKS!! WORK!
|
|
|
|
elsystem
Newbie
Offline
Activity: 46
Merit: 0
|
|
September 10, 2017, 12:27:12 PM |
|
Is it possible to cpu mine Zcoin and gpu mine simultaneously on nvoc?
anyone has an answer to this?
|
|
|
|
mikespax
|
|
September 10, 2017, 02:33:27 PM |
|
So there's this coin called PhoenixCoin in 7th place on whattomine right now. You can generate 500 coins a day with a 1080ti. So how would I go about adding this algorithm myself to nvOC?
|
Bitrated user: mikespax.
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
September 10, 2017, 03:14:21 PM Last edit: September 10, 2017, 08:42:58 PM by papampi |
|
So there's this coin called PhoenixCoin in 7th place on whattomine right now. You can generate 500 coins a day with a 1080ti. So how would I go about adding this algorithm myself to nvOC?
Add these to appropriate locations 1bash : PXC_WORKER="$WORKERNAME" PXC_ADDRESS="PXC_ADDRESS" PXC_POOL="stratum+tcp://atlas.phoenixcoin.org:10554" 3main: if [ $COIN == "PXC" ] then HCD='/home/m1/SPccminer/ccminer' ADDR="$PXC_ADDRESS.$PXC_WORKER"
screen -dmSL miner $HCD -a neoscrypt -o $PXC_POOL -u $ADDR -p x
if [ $LOCALorREMOTE == "LOCAL" ] then screen -r miner fi
BITCOIN="theGROUND"
while [ $BITCOIN == "theGROUND" ] do sleep 60 done fi
IMPORTANT UPDATE for PXC miners; who are using the above code Please make this change in 3main; if you don't, your shares are not getting accepted. Find this line; and replace the '.' to '/' ADDR="$PXC_ADDRESS.$PXC_WORKER" to this; ADDR="$PXC_ADDRESS/$PXC_WORKER" I've noticed one of our nvOC user tried to mine PXC using above code; their shares are not accepted (don't remember their address but it was like this PXC_ADDRESS.117). Please change it.
|
|
|
|
mikespax
|
|
September 10, 2017, 03:54:19 PM |
|
THANK YOU! feel free to send me a PXC address and I'll give you the first couple of hours
|
Bitrated user: mikespax.
|
|
|
|