CryptAtomeTrader44
Full Member
 Offline
Activity: 340
Merit: 103
It is easier to break an atom than partialities AE
|
 |
December 03, 2017, 02:41:26 PM |
|
I do not understand but for 1 to 2 weeks, I have a pb with guake after a manual restart or autiomatic rig: nvOC_v0019-1.4
rig IP: 10.1.1.100
rig MAC: ab:cd:ef:gh:ij:kl
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
03:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
Sun Dec 3 13:19:33 2017
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 387.12 Driver Version: 387.12 |
|-------------------------------+----------------------+----------------------+
| GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC |
| Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. |
|===============================+======================+======================|
| 0 GeForce GTX 1070 Off | 00000000:01:00.0 On | N/A |
| 0% 42C P0 36W / 151W | 116MiB / 8110MiB | 1% Default |
+-------------------------------+----------------------+----------------------+
| 1 GeForce GTX 1070 Off | 00000000:03:00.0 Off | N/A |
| 0% 33C P8 8W / 151W | 9MiB / 8113MiB | 0% Default |
+-------------------------------+----------------------+----------------------+
+-----------------------------------------------------------------------------+
| Processes: GPU Memory |
| GPU PID Type Process name Usage |
|=============================================================================|
| 0 1017 G /usr/lib/xorg/Xorg 85MiB |
| 0 1581 G compiz 28MiB |
| 1 1017 G /usr/lib/xorg/Xorg 6MiB |
+-----------------------------------------------------------------------------+
Power limit for GPU 00000000:01:00.0 was set to 135.00 W from 151.00 W.
Warning: persistence mode is disabled on this device. This settings will go back to default as soon as driver unloads (e.g. last application like nvidia-smi or cuda application terminates). Run with [--help | -h] switch to get more information on how to enable persistence mode.
Power limit for GPU 00000000:03:00.0 was set to 135.00 W from 151.00 W.
Warning: persistence mode is disabled on this device. This settings will go back to default as soon as driver unloads (e.g. last application like nvidia-smi or cuda application terminates). Run with [--help | -h] switch to get more information on how to enable persistence mode.
All done.
(guake:2048): libglade-WARNING **: unknown attribute `swapped' for <signal>.
(guake:2048): libglade-WARNING **: unknown attribute `swapped' for <signal>.
(guake:2048): libglade-WARNING **: unknown attribute `swapped' for <signal>.
(guake:2048): libglade-WARNING **: unknown attribute `swapped' for <signal>.
(guake:2048): libglade-WARNING **: unknown attribute `swapped' for <signal>.
(guake:2048): libglade-WARNING **: unknown attribute `swapped' for <signal>.
(guake:2048): libglade-WARNING **: unknown attribute `swapped' for <signal>.
(guake:2048): libglade-WARNING **: unknown attribute `swapped' for <signal>.
(guake:2048): libglade-WARNING **: unknown attribute `swapped' for <signal>.
(guake:2048): libglade-WARNING **: unknown attribute `swapped' for <signal>.
(guake:2048): libglade-WARNING **: unknown attribute `swapped' for <signal>.
(guake:2048): libglade-WARNING **: unknown attribute `swapped' for <signal>.
(guake:2048): libglade-WARNING **: unknown attribute `swapped' for <signal>.
(guake:2048): libglade-WARNING **: unknown attribute `swapped' for <signal>.
(guake:2048): libglade-WARNING **: unknown attribute `swapped' for <signal>.
(guake:2048): libglade-WARNING **: unknown attribute `swapped' for <signal>.
(guake:2048): libglade-WARNING **: unknown attribute `swapped' for <signal>.
(guake:2048): libglade-WARNING **: unknown attribute `swapped' for <signal>.
(guake:2048): libglade-WARNING **: unknown attribute `swapped' for <signal>.
(guake:2048): libglade-WARNING **: unknown attribute `swapped' for <signal>.
(guake:2048): libglade-WARNING **: unknown attribute `swapped' for <signal>.
(guake:2048): libglade-WARNING **: unknown attribute `swapped' for <signal>.
INFO:guake.guake_app:Logging configuration complete
/usr/lib/python2.7/dist-packages/guake/guake_app.py:1785: GtkWarning: gtk_box_pack: assertion 'child->parent == NULL' failed
self.mainframe.pack_start(self.notebook, expand=True, fill=True, padding=0)
^CTraceback (most recent call last):
File "/usr/lib/python2.7/runpy.py", line 174, in _run_module_as_main
Can someone explain how to résolve this pb ? |
|
|
|
|
CryptAtomeTrader44
Full Member
Offline
Activity: 340
Merit: 103
It is easier to break an atom than partialities AE
|
|
December 03, 2017, 03:37:11 PM |
|
Thanks a lot mate.
It was always a question for me what those loops are for...
Tested the miner start script without the loops and all is good.
I think as you said its some legacy code from old nvOC and can be removed.
And as I said before that wtm-miner is just a copy of 3main miner starts so wtm auto switch dont restart 3main which will take so long and just switch miner.
I rolled a version of 3main without the loops this morning and tested it with poor results. It would appear that the miner runs but the watchdog kills it because of low utilization after the 70 second grace period. So, what I think is going on here is that we need 3main to continue to run not because of the mining screen but because of the OC and PL settings. When 3main ends, those go away, and the miner starts performing poorly. What I did to fix it was to add a single infinite loop at the end of 3main to make sure it never exits. So, at least we can clean up 3main substantially by removing the 30+ instances of that loop. My version of 3main is left with only 3 - two in the SALFTER sections (because I haven't bothered to figure out what is going on there) and the one I added back in at the end. Can you try enabling persistence mode remove the loop at the end and try if this fixes the utilization after 3main exits is ti possible to intégrate or make permanent in nvOC ? Man page give this result : DEVICE MODIFICATION OPTIONS [any one of] -pm, --persistence-mode=MODE Set the persistence mode for the target GPUs. See the (GPU ATTRIBUTES) section for a description of persistence mode. Requires root. Will impact all GPUs unless a single GPU is specified using the -i argument. The effect of this operation is immediate. However, it does not persist across reboots. After each reboot persistence mode will default to "Disabled". Available on Linux only. |
|
|
|
|
kgeorgiev
Copper Member
Newbie
Offline
Activity: 91
Merit: 0
|
|
December 03, 2017, 04:34:03 PM |
|
Hello guys, i know this is stupid but I cannot get my nvOC flash drive to boot..
I tried on my personal PC as well - first I tried to boot from UEFI: <name of flash drive> and nothing happened. Then I booted from <name of flash drive> without UEFI and it launched properly. Then I went back to my mining machine and tried doing the same but I only see the UEFI option and when I select it, nothing happens again. The mobo on the miner is ASUS B250 Mining and the one on my personal PC is ASUS Z270-A which makes me even more confused as to why I see different options.
Any help would be appreciated.
|
|
|
|
|
Stubo
Member
Offline
Activity: 224
Merit: 13
|
|
December 03, 2017, 05:45:00 PM |
|
Hello guys, i know this is stupid but I cannot get my nvOC flash drive to boot..
I tried on my personal PC as well - first I tried to boot from UEFI: <name of flash drive> and nothing happened. Then I booted from <name of flash drive> without UEFI and it launched properly. Then I went back to my mining machine and tried doing the same but I only see the UEFI option and when I select it, nothing happens again. The mobo on the miner is ASUS B250 Mining and the one on my personal PC is ASUS Z270-A which makes me even more confused as to why I see different options.
Any help would be appreciated.
I had the same problem with the Asus B250 Mining Expert. As I recall, the CSM was set to disabled by default in the BIOS. Try changing it to enabled. Hope this helps. |
|
|
|
|
Barsban
Member
Offline
Activity: 121
Merit: 20
|
|
December 04, 2017, 05:24:31 AM |
|
please, somebody, upload latest oneBash and all related config files. I'm on ubunty and use some tweeks from very old oneBash and want to update the system.  thanks |
|
|
|
|
kgeorgiev
Copper Member
Newbie
Offline
Activity: 91
Merit: 0
|
|
December 04, 2017, 12:43:47 PM |
|
Hello guys, i know this is stupid but I cannot get my nvOC flash drive to boot..
I tried on my personal PC as well - first I tried to boot from UEFI: <name of flash drive> and nothing happened. Then I booted from <name of flash drive> without UEFI and it launched properly. Then I went back to my mining machine and tried doing the same but I only see the UEFI option and when I select it, nothing happens again. The mobo on the miner is ASUS B250 Mining and the one on my personal PC is ASUS Z270-A which makes me even more confused as to why I see different options.
Any help would be appreciated.
I had the same problem with the Asus B250 Mining Expert. As I recall, the CSM was set to disabled by default in the BIOS. Try changing it to enabled. Hope this helps. Thanks, that was it ! |
|
|
|
|
WaveFront
Member
Offline
Activity: 126
Merit: 10
|
|
December 04, 2017, 04:19:28 PM |
|
Hello, Anyone has experience in mining Electroneum (ETN)? Can I use the settings for Monero and just change the pool address and wallet? I see that Monero is configured for xmr-stak-nvidia. Is there a developer fee? Cheers  |
|
|
|
|
|
poisonxa
|
|
December 04, 2017, 05:18:43 PM |
|
Guys if you head over to the Official Discord channel you can get an updated version 1.5 its available in the downloads section of the discord channel updates include the following:
Updated all miners and drivers to latest ones as of 12/3/2017
Enhanced WatchDog Performance With a variable sensitivity Scanner
"Will also scan for disconnected gpus and or lost gpus" will auto reboot to get you up and running faster
added remote bash feature Will allow your to host your 1bash files remotely to edit your miners without direct connection
Enhanced Auto Temperature now scans faster adjusts faster for less fluctuations and once target temp is reached will keep the temperature better
Added auto overclock feature to allow the miner to find the best clock and memory settings for your card make sure you set a valid max temperature per card
So you must set a maximum temperature that the card actually gets to with power adjustments
Added Dual Windows so that its easier to troubleshoot the miners because the terminal stays open after loading the miner
Added bug fixes and improvments to enhance hashrate and system performance.
Fixed a bunch of Bugs that where plagueing fullzeros v1.4
Fixed a bunch of small bugs to many to list here.
The Discord channel link is on the 1st post
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
December 04, 2017, 07:44:21 PM |
|
Guys if you head over to the Official Discord channel you can get an updated version 1.5 its available in the downloads section of the discord channel updates include the following:
Updated all miners and drivers to latest ones as of 12/3/2017
Enhanced WatchDog Performance With a variable sensitivity Scanner
"Will also scan for disconnected gpus and or lost gpus" will auto reboot to get you up and running faster
added remote bash feature Will allow your to host your 1bash files remotely to edit your miners without direct connection
Enhanced Auto Temperature now scans faster adjusts faster for less fluctuations and once target temp is reached will keep the temperature better
Added auto overclock feature to allow the miner to find the best clock and memory settings for your card make sure you set a valid max temperature per card
So you must set a maximum temperature that the card actually gets to with power adjustments
Added Dual Windows so that its easier to troubleshoot the miners because the terminal stays open after loading the miner
Added bug fixes and improvments to enhance hashrate and system performance.
Fixed a bunch of Bugs that where plagueing fullzeros v1.4
Fixed a bunch of small bugs to many to list here.
The Discord channel link is on the 1st post
Is this official update by fullzero or an unofficial? |
|
|
|
|
poisonxa
|
|
December 04, 2017, 07:46:34 PM |
|
Unofficial pamp why don't u come to discord let's merge projects
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
December 04, 2017, 07:47:48 PM
Last edit: December 05, 2017, 08:48:11 AM by papampi |
|
Here is an unofficial stable with so many fixes and new stuff by me, Stubu and Leenoox Change log: 3main edits :
Removed the infinite loops and put one at the end to cover all mining blocks (stubo)
Removed repetitive if LOCAL then "screen -r miner" from each mining block and put one at the end to cover all mining blocks (stubo)
Added support for BTG as per forum posts
Changed ZM lines to use the latest ZM miner 0.5.6 (s/5_3/5_4/g)
Added telemetry/api to EWBF and ZM miner launches so that you can hit <host>:42000 to see this miner output (stubo)
Added the ability to pass in a miner password for all miners that have the "--pass" arg. (stubo)
Changed instances of "--pass x" and "--pass x" and "-p x" to "--pass $MINER_PWD" (stubo)
Changed dstm zm location to "~/zec/zm/latest/" for easier future updates (papampi mod)
Changed all miner start scripts to use separate pool and port from 1bash so watchdog can check the pool connection easier (papampi mod)
Added log rotate settings (papampi mod)
Moved miner start from 3main to 0miner, to make 3main lighter and better handle of miner start (papampi)
Added auto start miner yes or no ( in case you need to edit or debug the rig) (papampi)
1bash edits:
Added EWBF_OPTS and ZM_OPTS for telemetry/api to EWBF and ZM miner (Stubu mod)
Added MINER_PWD for miner passwords (Stubu mod)
Unified and separated all pool address and pool ports so wdog can check if pool is up or no if needed (papampi mod)
wdog edits:
Added check if miner is running or not when utilization dropped to restart miner faster (stubo mod)
Added check for internet and wait if its down (stubo mod)
Added check mining pool:port if internet is up and wait before restart miner and reboot system (papampi mod)
Added "Warning" to log output of alerts to catch them easier (papampi mod)
Changed logfile location to tmpfs (papampi mod)
Fixed a bug in logging system to start with 2k size.
Added checking number of gpus installed vs system reported gpus at start of wdog, so you know if a gpu is not working.
Changed sleep time before wdog goin on watch to be based on gpu counts (papampi mod)
temp control (by LEENOOX):
Set higher process and disk I/O priorities - Temp control is essential service
Auto detection of number of GPU's
Only set, adjust and display available GPU's, dynamic variables creation
Numeric check of the return values from nvidia-smi (looking for numbers only, anything else = error)
Reboot if GPU error detected and watchdog didn't react for 60 seconds (act as a backup watchdog)
Added query delay to nvidia API (no burst spamming, added 0.5 sec delay, prevent overload), helps reduce stale shares
New (improved) display output including colors and bold text
Fixed the log file handling (Bug fix: Previous implemantation was not limiting the file size)
Removed repetitive GPUFanControlState setting, it only needs to be set once, not every cycle (prevent API overload)
Added log rotation (papampi mod)
changed minerinfo and papampi-telegram for new log locations (papampi mod)
Create tmpfs partition to change logfile location to tmpfs to lower read/writes to HDD/USB (papampi mod)
changed minerinfo web so those who dont use wtm dont see empty or no wtm entries
And so many more
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
December 04, 2017, 07:48:50 PM |
|
Unofficial pamp why don't u come to discord let's merge projects
I think it's easier on GitHub, Please head over to GitHub and I add you to contributors to merge changes |
|
|
|
WaveFront
Member
Offline
Activity: 126
Merit: 10
|
|
December 04, 2017, 08:02:36 PM |
|
Guys if you head over to the Official Discord channel you can get an updated version 1.5 its available in the downloads section of the discord channel updates include the following:
Updated all miners and drivers to latest ones as of 12/3/2017
Enhanced WatchDog Performance With a variable sensitivity Scanner
"Will also scan for disconnected gpus and or lost gpus" will auto reboot to get you up and running faster
added remote bash feature Will allow your to host your 1bash files remotely to edit your miners without direct connection
Enhanced Auto Temperature now scans faster adjusts faster for less fluctuations and once target temp is reached will keep the temperature better
Added auto overclock feature to allow the miner to find the best clock and memory settings for your card make sure you set a valid max temperature per card
So you must set a maximum temperature that the card actually gets to with power adjustments
Added Dual Windows so that its easier to troubleshoot the miners because the terminal stays open after loading the miner
Added bug fixes and improvments to enhance hashrate and system performance.
Fixed a bunch of Bugs that where plagueing fullzeros v1.4
Fixed a bunch of small bugs to many to list here.
The Discord channel link is on the 1st post
Thank you Poisonxa, I am downloading it and will give it a try :-) How does the auto overclock feature works? |
|
|
|
|
|
poisonxa
|
|
December 04, 2017, 08:09:33 PM |
|
Check in the discord community we explain the features keep in mind it's In beta
|
|
|
|
ruepa
Newbie
Offline
Activity: 10
Merit: 0
|
|
December 05, 2017, 12:47:42 PM |
|
Pretty sure this is something really simple...but I can't get a login to the desktop  I get a prompt with either m1 or Guest session and the password miner1 doesn't work for me at all. It seems to take it but just jumps back to the login screen again Can you log in in console mode? press: ctrl + alt + f1 to enter console mode login is: m1 password: miner1 If you can login in console mode; type: reboot and press enter the miner should restart and auto login with full X. nvoc 19 did someone find the solution i have two 1070 mini mo giga ga-z270p-d3 same problem it mines then in the night stops mining if i reboot cant login with pass miner1 even if i open another terminal and reboot just goes back to login screen and i cant log back in thx for your help +1 with the same problem. If i re flash everything works great for about 12/24hrs, then the rig reboots without clear reason and get's stuck in the login page unable to login. For me the only solution is to erase and re-flash nvOC into the USB. Already tried differente USB drive all with the exact same results. MOBO is a Asus prime z270-P |
|
|
|
|
|
poisonxa
|
|
December 05, 2017, 12:49:21 PM |
|
Disable updating of drivers or update them yourself.
|
|
|
|
Oleg_filin
Newbie
Offline
Activity: 31
Merit: 0
|
|
December 05, 2017, 12:55:09 PM |
|
Hello! How I can add miner for trezarcoin (TZC)?
|
|
|
|
|
|
crazydane
|
|
December 05, 2017, 03:27:32 PM |
|
So are we at a crossroads?
On one side we have poisonxa's 19-1.5, and on the other side we have papampi's 19-2 (with contributions from several other members here).
I have been doing a lot of testing with stubo and know a lot of tweaks to the watchdog script have really helped with stability. Very few of these tweaks are in the current 1.5 poisonxa code and several bugs that have been discovered are still present there as well.
Isn't this the "official" thread for nvOC?
Why did some run off to the discord channel? Was some need not being met here?
Hopefully fullzero will be back at some point to "get the band back together".
|
|
|
|
|
|
Temporel
|
|
December 05, 2017, 03:39:19 PM |
|
So are we at a crossroads?
Why did some run off to the discord channel? Was some need not being met here?
Hopefully fullzero will be back at some point to "get the band back together".
nvOC has a fork ! |
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
December 05, 2017, 03:48:59 PM |
|
So are we at a crossroads?
On one side we have poisonxa's 19-1.5, and on the other side we have papampi's 19-2 (with contributions from several other members here).
I have been doing a lot of testing with stubo and know a lot of tweaks to the watchdog script have really helped with stability. Very few of these tweaks are in the current 1.5 poisonxa code and several bugs that have been discovered are still present there as well.
Isn't this the "official" thread for nvOC?
Why did some run off to the discord channel? Was some need not being met here?
Hopefully fullzero will be back at some point to "get the band back together".
We are working on merging the 2 project into one, Already asked poisonxa to join our team to release a single one. |
|
|
|
|
