Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[EtaCarinae]

Dear Mr. Clay, when the MORE hashrate for ngreedia cards update will be available? Can you make optimisations for 1080ti? It is a lovely card hashing at 37.5 eth and almost 1000mh/s pascal. But I believe it can do better. Please Pleaseeee *bursts in tears*

[Vanguard*]

Dear Mr. Clay, when the MORE hashrate for ngreedia cards update will be available? Can you make optimisations for 1080ti? It is a lovely card hashing at 37.5 eth and almost 1000mh/s pascal. But I believe it can do better. Please Pleaseeee *bursts in tears*

i too am curious when the nvidia update will be available to this miner

is there a way to mine just alt coins for now with claymore? as i amd losing nearly 5mhs per gpu if i cant mine ether with update

[crd007]

Why don't this miner use the full GPU clock available?
I have a R9 390 with 1050 Mhz GPU clock and when running the Claymore miner in dualmining mode iht just uses 1000 Mhz roughly ..
When averclocking to 1100 Mhz it still uses just 1020 Mhz. Why is this so and what can I do to eliminate this problem?

Thanks in advance!

[spyshagg]

Does options -cvddc -mvddc work with rx 570?

-cvddc MIGHT work on Windows, not on Linux. -mvddc will do nothing.

-cvddc does work on windows, but there are some roadblocks.  Firstly, on my Expeditions 570's  -cvddc 831 does set the voltage correctly most of the times. On my ITX 570's, no matter the value I set, the cards hit a limit at about 950mv.  

But keep reading this, because there is a trick i found to set the voltage 100% of the time. If you use the command  -mclock to set your ram clock above your stock ram speeds, then -cvddc bellow 950mv will work.

I am running all my expeditions with -cvddc 831  and my Itx with -cvddc 862. The only trick was to use -mclock to overclock my Ram instead of using Afterburner or bios mods.



  

[spyshagg]

Why don't this miner use the full GPU clock available?
I have a R9 390 with 1050 Mhz GPU clock and when running the Claymore miner in dualmining mode iht just uses 1000 Mhz roughly ..
When averclocking to 1100 Mhz it still uses just 1020 Mhz. Why is this so and what can I do to eliminate this problem?

Thanks in advance!

Increase powerlimit to 50%, or, decrease your vcore if your gpu core budget allows.

[crd007]

Why don't this miner use the full GPU clock available?
I have a R9 390 with 1050 Mhz GPU clock and when running the Claymore miner in dualmining mode iht just uses 1000 Mhz roughly ..
When averclocking to 1100 Mhz it still uses just 1020 Mhz. Why is this so and what can I do to eliminate this problem?

Thanks in advance!

Increase powerlimit to 50%, or, decrease your vcore if your gpu core budget allows.

Perfect, this does the job!
Thanks for your help

[HowlingMad]

Search is temporarily disabled so... I am running 9.2 on Windows 10 x64.

Anyone mining LBRY?  I tried it with 2 different pools and get a 100% FAILURE rate?.
Thank you

[Intristing]

Search is temporarily disabled so... I am running 9.2 on Windows 10 x64.

Anyone mining LBRY?  I tried it with 2 different pools and get a 100% FAILURE rate?.
Thank you

You may try the later 9.5 or 9.6.

[HowlingMad]

Search is temporarily disabled so... I am running 9.2 on Windows 10 x64.

Anyone mining LBRY?  I tried it with 2 different pools and get a 100% FAILURE rate?.
Thank you

You may try the later 9.5 or 9.6.

I upgrade to 9.6 and I reread the readme!!! file.  I had forgotten the -dcoin parameter on startup.  -dcoin lbc

Thanks

[z0n0]

Can someone please tell me how to get more than 2 mhs average on 1080 and 1080 ti cards with win 10?

http://cryptomining-blog.com/tag/gtx-1080-overclocking/

you can find here all information about growing the hashrate for 1080 card

It doesn't say what I need to do for higher hashrate,my problem is in nvidia control center something about 3D option but I can't really remember correctly

You must update to The Windows 10 Creators Update.

[vapourminer]

Why don't this miner use the full GPU clock available?
I have a R9 390 with 1050 Mhz GPU clock and when running the Claymore miner in dualmining mode iht just uses 1000 Mhz roughly ..
When averclocking to 1100 Mhz it still uses just 1020 Mhz. Why is this so and what can I do to eliminate this problem?

Thanks in advance!

might be hitting a power limit.

undervolt it and make sure power limit is high enough.

[MinerosYV]

Why don't this miner use the full GPU clock available?
I have a R9 390 with 1050 Mhz GPU clock and when running the Claymore miner in dualmining mode iht just uses 1000 Mhz roughly ..
When averclocking to 1100 Mhz it still uses just 1020 Mhz. Why is this so and what can I do to eliminate this problem?

Thanks in advance!

might be hitting a power limit.

undervolt it and make sure power limit is high enough.

+30 on the power limit, 1130 to get to 32 Mhs with DCR at 30 for 850 Mhs.
It suck a lot of juice, it heats like a hair dryer, but as long as its making money who cares.
Fact, a 7 x R9 390 rig uses 24 plus amps.

[calzone]

is there a command for hide current dcr hashrate?, i mean i want the miner to show only ETH stats.

[chienbinhso13]

Have anyone performance drop with RX 570 in DAG 132?
DAG 129: 27.8MH/s
DAG 130: 27.6MH/s
DAG 131: 27.3MH/s
DAG 132: 26.5MH/s
I've to try bios reflash and OC memory to 1900~2000 but still no hope.

[sweetydady]

Have anyone performance drop with RX 570 in DAG 132?
DAG 129: 27.8MH/s
DAG 130: 27.6MH/s
DAG 131: 27.3MH/s
DAG 132: 26.5MH/s
I've to try bios reflash and OC memory to 1900~2000 but still no hope.

seriously, are you living on Mars or what?

[Killcycle]

I have two R9 290 that are very different, any tips for me?

- Asus R9 290 is mining with 24,5Mh/s with ethi 2 (!) only, to work stable. (why?)
- Sapphire R9 290 is mining with 27,5Mh/s with no ethi entry.

Both cards with -100mV and GPU Core @ 1000Mhz and Memory clock @ 1100Mhz

The only differenz i've found out was that the Asus got Elpida RAM and the Sapphire Hynix

[platinum4]

Well, I don't think you'll be able to reproduce my EXACT findings, as I'm using my personal ASM kernel for performance reasons - but yeah, the stock ethash should drop in perf.

Hey what's been up

[EtaCarinae]

Have anyone performance drop with RX 570 in DAG 132?
DAG 129: 27.8MH/s
DAG 130: 27.6MH/s
DAG 131: 27.3MH/s
DAG 132: 26.5MH/s
I've to try bios reflash and OC memory to 1900~2000 but still no hope.

seriously, are you living on Mars or what?

Is mining on Mars profitable? I hear latency is killing it there.

[jmigdlc99]

Has anyone done a computation of Mr. Claymores total earnings to date? Pretty safe to safe hes a billionaire about now right?

[FloppyPurpleGherkin]

@ Claymore

6 x 1070 rig, Have 4 other rigs the same that are fine, This rig always kicks out CUDA 11 error.. Heres log...

Code:

07:52:16:940	a58	
07:52:16:941	a58	ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
07:52:16:944	a58	º      Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.6      º
07:52:16:946	a58	ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
07:52:16:947	a58	
07:52:17:154	a58	ETH: 1 pool is specified
07:52:17:156	a58	Main Ethereum pool is eu1.ethermine.org:4444
07:52:17:157	a58	DCR: 0 pool is specified
07:52:18:009	a58	OpenCL platform: AMD Accelerated Parallel Processing
07:52:18:013	a58	OpenCL platform: NVIDIA CUDA
07:52:18:018	a58	No AMD cards in the list.
07:52:19:076	a58	CUDA initializing...

07:52:19:078	a58	NVIDIA Cards available: 6 
07:52:19:081	a58	CUDA Driver Version/Runtime Version: 8.0/8.0
07:52:19:084	a58	GPU #0: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1

07:52:19:087	a58	GPU #1: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1

07:52:19:090	a58	GPU #2: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1

07:52:19:094	a58	GPU #3: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1

07:52:19:097	a58	GPU #4: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1

07:52:19:102	a58	GPU #5: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1

07:52:19:105	a58	Total cards: 6 
07:52:27:218	a58	No AMD cards in the list, ADL library will not be used.
07:52:27:231	a58	NVML version: 8.382.53
07:52:28:752	c10	ETH: Stratum - connecting to 'eu1.ethermine.org' <91.121.167.111> port 4444
07:52:28:778	c10	send: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["0x80abe5428332f49df57fbdce451d00a6781976f4.bill1", "x"], "id": 2, "method": "eth_submitLogin"}

07:52:28:780	c10	ETH: Stratum - Connected (eu1.ethermine.org:4444)
07:52:28:804	c10	got 39 bytes
07:52:28:805	c10	buf: {"id":2,"jsonrpc":"2.0","result":true}

07:52:28:807	c10	parse packet: 38
07:52:28:809	c10	ETH: Authorized
07:52:28:811	c10	send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

07:52:28:813	c10	new buf size: 0
07:52:28:826	a58	No pool specified for Decred! Ethereum-only mining mode is enabled

07:52:28:829	a58	ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)

07:52:28:834	a58	ETH: eth-proxy stratum mode
07:52:28:836	a58	Watchdog enabled
07:52:28:837	c10	got 248 bytes
07:52:28:841	c10	buf: {"id":3,"jsonrpc":"2.0","result":["0xd53e4e3c073025660dc7f9435de130d56f22eaebe8188828408732229e003195","0x39c5f107628ba618a6a867dd78baf80d6d04ace84c3835886f198872e48f084a","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x3cae10"]}

07:52:28:842	c10	parse packet: 247
07:52:28:844	c10	ETH: job changed
07:52:28:846	c10	new buf size: 0
07:52:28:850	a58	Remote management (READ-ONLY MODE) is enabled on port 3333
07:52:28:853	a58	

07:52:28:938	fe0	Setting DAG epoch #132...
07:52:31:355	efc	Setting DAG epoch #132 for GPU3
07:52:31:355	fe0	Setting DAG epoch #132 for GPU5
07:52:31:361	f7c	Setting DAG epoch #132 for GPU4
07:52:31:358	efc	Create GPU buffer for GPU3
07:52:31:358	5c4	Setting DAG epoch #132 for GPU2
07:52:31:358	a98	Setting DAG epoch #132 for GPU1
07:52:31:372	a3c	Setting DAG epoch #132 for GPU0
07:52:31:374	f7c	Create GPU buffer for GPU4
07:52:31:377	a98	Create GPU buffer for GPU1
07:52:31:383	a3c	Create GPU buffer for GPU0
07:52:31:386	fe0	Create GPU buffer for GPU5
07:52:31:389	5c4	Create GPU buffer for GPU2
07:52:32:633	5c4	CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

07:52:32:639	f7c	CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

07:52:32:642	a98	CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

07:52:35:639	5c4	Set global fail flag, failed GPU2
07:52:35:641	5c4	GPU 2 failed
07:52:35:641	9f8	Setting DAG epoch #132 for GPU2
07:52:35:642	f7c	Set global fail flag, failed GPU4
07:52:35:646	9f8	GPU 2, CUDA error 11 - cannot write buffer for DAG

07:52:35:645	a98	Set global fail flag, failed GPU1
07:52:35:651	f7c	GPU 4 failed
07:52:35:654	a98	GPU 1 failed
07:52:35:650	cf0	Setting DAG epoch #132 for GPU4
07:52:35:653	a8c	Setting DAG epoch #132 for GPU1
07:52:35:660	cf0	GPU 4, CUDA error 11 - cannot write buffer for DAG

07:52:35:662	a8c	GPU 1, CUDA error 11 - cannot write buffer for DAG

07:52:36:208	c10	got 248 bytes
07:52:36:209	c10	buf: {"id":0,"jsonrpc":"2.0","result":["0x3b8c500dc9e31b0033f38bce1c304cdf4902eddf39e03647051f7d73ebffa1e2","0x39c5f107628ba618a6a867dd78baf80d6d04ace84c3835886f198872e48f084a","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x3cae11"]}

07:52:36:211	c10	parse packet: 247
07:52:36:213	c10	ETH: job changed
07:52:36:215	c10	new buf size: 0
07:52:36:218	c10	ETH: 07/05/17-07:52:36 - New job from eu1.ethermine.org:4444
07:52:36:220	c10	target: 0x0000000112e0be82 (diff: 4000MH), epoch 132(2.03GB)
07:52:36:222	c10	ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
07:52:36:224	c10	ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s
07:52:38:439	fe0	GPU5 DAG creation time - 5697 ms
07:52:38:441	fe0	Setting DAG epoch #132 for GPU5 done
07:52:38:453	efc	GPU3 DAG creation time - 5715 ms
07:52:38:455	efc	Setting DAG epoch #132 for GPU3 done
07:52:38:650	9f8	Set global fail flag, failed GPU2
07:52:38:652	9f8	GPU 2 failed
07:52:38:663	cf0	Set global fail flag, failed GPU4
07:52:38:666	cf0	GPU 4 failed
07:52:38:696	a3c	GPU0 DAG creation time - 5949 ms
07:52:38:698	a3c	Setting DAG epoch #132 for GPU0 done
07:52:38:709	a8c	Set global fail flag, failed GPU1
07:52:38:711	a8c	GPU 1 failed
07:52:38:849	c10	ETH: checking pool connection...
07:52:38:853	c10	send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

07:52:38:874	c10	got 248 bytes
07:52:38:876	c10	buf: {"id":3,"jsonrpc":"2.0","result":["0x3b8c500dc9e31b0033f38bce1c304cdf4902eddf39e03647051f7d73ebffa1e2","0x39c5f107628ba618a6a867dd78baf80d6d04ace84c3835886f198872e48f084a","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x3cae11"]}

07:52:38:877	c10	parse packet: 247
07:52:38:879	c10	ETH: job is the same
07:52:38:881	c10	new buf size: 0
07:52:45:916	c10	got 248 bytes
07:52:45:918	c10	buf: {"id":0,"jsonrpc":"2.0","result":["0xcfe9a62a447353fbb88ab8e268a656f08682e0c3a5a34967d796225f133c1994","0x39c5f107628ba618a6a867dd78baf80d6d04ace84c3835886f198872e48f084a","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x3cae12"]}

07:52:45:920	c10	parse packet: 247
07:52:45:923	c10	ETH: job changed
07:52:45:925	c10	new buf size: 0
07:52:45:927	c10	ETH: 07/05/17-07:52:45 - New job from eu1.ethermine.org:4444
07:52:45:929	c10	target: 0x0000000112e0be82 (diff: 4000MH), epoch 132(2.03GB)
07:52:45:931	c10	ETH - Total Speed: 87.783 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
07:52:45:933	c10	ETH: GPU0 29.229 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 29.290 Mh/s, GPU4 0.000 Mh/s, GPU5 29.264 Mh/s
07:52:47:302	a00	GPU0 t=60C fan=60%, GPU1 t=54C fan=55%, GPU2 t=56C fan=56%, GPU3 t=60C fan=60%, GPU4 t=51C fan=51%, GPU5 t=56C fan=55%
07:52:47:306	a00	em hbt: 0, fm hbt: 0, 
07:52:47:309	a00	watchdog - thread 0 (gpu0), hb time 31
07:52:47:311	a00	watchdog - thread 1 (gpu0), hb time 109
07:52:47:313	a00	watchdog - thread 2 (gpu1), hb time 8609
07:52:47:315	a00	watchdog - thread 3 (gpu1), hb time 8609
07:52:47:317	a00	watchdog - thread 4 (gpu2), hb time 8609
07:52:47:319	a00	watchdog - thread 5 (gpu2), hb time 8625
07:52:47:321	a00	watchdog - thread 6 (gpu3), hb time 125
07:52:47:323	a00	watchdog - thread 7 (gpu3), hb time 63
07:52:47:326	a00	watchdog - thread 8 (gpu4), hb time 8625
07:52:47:328	a00	watchdog - thread 9 (gpu4), hb time 8625
07:52:47:329	a00	watchdog - thread 10 (gpu5), hb time 79
07:52:47:331	a00	watchdog - thread 11 (gpu5), hb time 16
07:52:47:334	a00	WATCHDOG: GPU error, you need to restart miner :( 
07:52:48:439	a00	Restarting OK, exit...

All GPU's have 8GB ram, I have plenty of Virtual memory set (~16gb)

Any ideas?