sweetydady
Newbie
 Offline
Activity: 44
Merit: 0
|
 |
July 05, 2017, 04:24:56 AM |
|
Have anyone performance drop with RX 570 in DAG 132?
DAG 129: 27.8MH/s
DAG 130: 27.6MH/s
DAG 131: 27.3MH/s
DAG 132: 26.5MH/s
I've to try bios reflash and OC memory to 1900~2000 but still no hope.
seriously, are you living on Mars or what? |
|
|
|
|
|
|
|
|
|
|
|
|
|
Bitcoin addresses contain a checksum, so it is very unlikely that mistyping an address will cause you to lose money.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
|
Killcycle
Newbie
Offline
Activity: 54
Merit: 0
|
|
July 05, 2017, 04:52:19 AM |
|
I have two R9 290 that are very different, any tips for me?
- Asus R9 290 is mining with 24,5Mh/s with ethi 2 (!) only, to work stable. (why?)
- Sapphire R9 290 is mining with 27,5Mh/s with no ethi entry.
Both cards with -100mV and GPU Core @ 1000Mhz and Memory clock @ 1100Mhz
The only differenz i've found out was that the Asus got Elpida RAM and the Sapphire Hynix
|
|
|
|
|
|
platinum4
|
|
July 05, 2017, 05:07:06 AM |
|
Well, I don't think you'll be able to reproduce my EXACT findings, as I'm using my personal ASM kernel for performance reasons - but yeah, the stock ethash should drop in perf.
Hey what's been up |
|
|
|
|
EtaCarinae
Newbie
Offline
Activity: 18
Merit: 0
|
|
July 05, 2017, 05:34:06 AM |
|
Have anyone performance drop with RX 570 in DAG 132?
DAG 129: 27.8MH/s
DAG 130: 27.6MH/s
DAG 131: 27.3MH/s
DAG 132: 26.5MH/s
I've to try bios reflash and OC memory to 1900~2000 but still no hope.
seriously, are you living on Mars or what? Is mining on Mars profitable? I hear latency is killing it there. |
|
|
|
|
|
jmigdlc99
|
|
July 05, 2017, 06:25:03 AM |
|
Has anyone done a computation of Mr. Claymores total earnings to date? Pretty safe to safe hes a billionaire about now right?
|
0xacBBa937A57ecE1298B5d350f40C0Eb16eC5fA4B
|
|
|
FloppyPurpleGherkin
Jr. Member
Offline
Activity: 306
Merit: 2
|
|
July 05, 2017, 06:56:35 AM |
|
@ Claymore 6 x 1070 rig, Have 4 other rigs the same that are fine, This rig always kicks out CUDA 11 error.. Heres log... 07:52:16:940 a58
07:52:16:941 a58 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
07:52:16:944 a58 º Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.6 º
07:52:16:946 a58 ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
07:52:16:947 a58
07:52:17:154 a58 ETH: 1 pool is specified
07:52:17:156 a58 Main Ethereum pool is eu1.ethermine.org:4444
07:52:17:157 a58 DCR: 0 pool is specified
07:52:18:009 a58 OpenCL platform: AMD Accelerated Parallel Processing
07:52:18:013 a58 OpenCL platform: NVIDIA CUDA
07:52:18:018 a58 No AMD cards in the list.
07:52:19:076 a58 CUDA initializing...
07:52:19:078 a58 NVIDIA Cards available: 6
07:52:19:081 a58 CUDA Driver Version/Runtime Version: 8.0/8.0
07:52:19:084 a58 GPU #0: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1
07:52:19:087 a58 GPU #1: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1
07:52:19:090 a58 GPU #2: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1
07:52:19:094 a58 GPU #3: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1
07:52:19:097 a58 GPU #4: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1
07:52:19:102 a58 GPU #5: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1
07:52:19:105 a58 Total cards: 6
07:52:27:218 a58 No AMD cards in the list, ADL library will not be used.
07:52:27:231 a58 NVML version: 8.382.53
07:52:28:752 c10 ETH: Stratum - connecting to 'eu1.ethermine.org' <91.121.167.111> port 4444
07:52:28:778 c10 send: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["0x80abe5428332f49df57fbdce451d00a6781976f4.bill1", "x"], "id": 2, "method": "eth_submitLogin"}
07:52:28:780 c10 ETH: Stratum - Connected (eu1.ethermine.org:4444)
07:52:28:804 c10 got 39 bytes
07:52:28:805 c10 buf: {"id":2,"jsonrpc":"2.0","result":true}
07:52:28:807 c10 parse packet: 38
07:52:28:809 c10 ETH: Authorized
07:52:28:811 c10 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
07:52:28:813 c10 new buf size: 0
07:52:28:826 a58 No pool specified for Decred! Ethereum-only mining mode is enabled
07:52:28:829 a58 ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
07:52:28:834 a58 ETH: eth-proxy stratum mode
07:52:28:836 a58 Watchdog enabled
07:52:28:837 c10 got 248 bytes
07:52:28:841 c10 buf: {"id":3,"jsonrpc":"2.0","result":["0xd53e4e3c073025660dc7f9435de130d56f22eaebe8188828408732229e003195","0x39c5f107628ba618a6a867dd78baf80d6d04ace84c3835886f198872e48f084a","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x3cae10"]}
07:52:28:842 c10 parse packet: 247
07:52:28:844 c10 ETH: job changed
07:52:28:846 c10 new buf size: 0
07:52:28:850 a58 Remote management (READ-ONLY MODE) is enabled on port 3333
07:52:28:853 a58
07:52:28:938 fe0 Setting DAG epoch #132...
07:52:31:355 efc Setting DAG epoch #132 for GPU3
07:52:31:355 fe0 Setting DAG epoch #132 for GPU5
07:52:31:361 f7c Setting DAG epoch #132 for GPU4
07:52:31:358 efc Create GPU buffer for GPU3
07:52:31:358 5c4 Setting DAG epoch #132 for GPU2
07:52:31:358 a98 Setting DAG epoch #132 for GPU1
07:52:31:372 a3c Setting DAG epoch #132 for GPU0
07:52:31:374 f7c Create GPU buffer for GPU4
07:52:31:377 a98 Create GPU buffer for GPU1
07:52:31:383 a3c Create GPU buffer for GPU0
07:52:31:386 fe0 Create GPU buffer for GPU5
07:52:31:389 5c4 Create GPU buffer for GPU2
07:52:32:633 5c4 CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
07:52:32:639 f7c CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
07:52:32:642 a98 CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
07:52:35:639 5c4 Set global fail flag, failed GPU2
07:52:35:641 5c4 GPU 2 failed
07:52:35:641 9f8 Setting DAG epoch #132 for GPU2
07:52:35:642 f7c Set global fail flag, failed GPU4
07:52:35:646 9f8 GPU 2, CUDA error 11 - cannot write buffer for DAG
07:52:35:645 a98 Set global fail flag, failed GPU1
07:52:35:651 f7c GPU 4 failed
07:52:35:654 a98 GPU 1 failed
07:52:35:650 cf0 Setting DAG epoch #132 for GPU4
07:52:35:653 a8c Setting DAG epoch #132 for GPU1
07:52:35:660 cf0 GPU 4, CUDA error 11 - cannot write buffer for DAG
07:52:35:662 a8c GPU 1, CUDA error 11 - cannot write buffer for DAG
07:52:36:208 c10 got 248 bytes
07:52:36:209 c10 buf: {"id":0,"jsonrpc":"2.0","result":["0x3b8c500dc9e31b0033f38bce1c304cdf4902eddf39e03647051f7d73ebffa1e2","0x39c5f107628ba618a6a867dd78baf80d6d04ace84c3835886f198872e48f084a","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x3cae11"]}
07:52:36:211 c10 parse packet: 247
07:52:36:213 c10 ETH: job changed
07:52:36:215 c10 new buf size: 0
07:52:36:218 c10 ETH: 07/05/17-07:52:36 - New job from eu1.ethermine.org:4444
07:52:36:220 c10 target: 0x0000000112e0be82 (diff: 4000MH), epoch 132(2.03GB)
07:52:36:222 c10 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
07:52:36:224 c10 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s
07:52:38:439 fe0 GPU5 DAG creation time - 5697 ms
07:52:38:441 fe0 Setting DAG epoch #132 for GPU5 done
07:52:38:453 efc GPU3 DAG creation time - 5715 ms
07:52:38:455 efc Setting DAG epoch #132 for GPU3 done
07:52:38:650 9f8 Set global fail flag, failed GPU2
07:52:38:652 9f8 GPU 2 failed
07:52:38:663 cf0 Set global fail flag, failed GPU4
07:52:38:666 cf0 GPU 4 failed
07:52:38:696 a3c GPU0 DAG creation time - 5949 ms
07:52:38:698 a3c Setting DAG epoch #132 for GPU0 done
07:52:38:709 a8c Set global fail flag, failed GPU1
07:52:38:711 a8c GPU 1 failed
07:52:38:849 c10 ETH: checking pool connection...
07:52:38:853 c10 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
07:52:38:874 c10 got 248 bytes
07:52:38:876 c10 buf: {"id":3,"jsonrpc":"2.0","result":["0x3b8c500dc9e31b0033f38bce1c304cdf4902eddf39e03647051f7d73ebffa1e2","0x39c5f107628ba618a6a867dd78baf80d6d04ace84c3835886f198872e48f084a","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x3cae11"]}
07:52:38:877 c10 parse packet: 247
07:52:38:879 c10 ETH: job is the same
07:52:38:881 c10 new buf size: 0
07:52:45:916 c10 got 248 bytes
07:52:45:918 c10 buf: {"id":0,"jsonrpc":"2.0","result":["0xcfe9a62a447353fbb88ab8e268a656f08682e0c3a5a34967d796225f133c1994","0x39c5f107628ba618a6a867dd78baf80d6d04ace84c3835886f198872e48f084a","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x3cae12"]}
07:52:45:920 c10 parse packet: 247
07:52:45:923 c10 ETH: job changed
07:52:45:925 c10 new buf size: 0
07:52:45:927 c10 ETH: 07/05/17-07:52:45 - New job from eu1.ethermine.org:4444
07:52:45:929 c10 target: 0x0000000112e0be82 (diff: 4000MH), epoch 132(2.03GB)
07:52:45:931 c10 ETH - Total Speed: 87.783 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
07:52:45:933 c10 ETH: GPU0 29.229 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 29.290 Mh/s, GPU4 0.000 Mh/s, GPU5 29.264 Mh/s
07:52:47:302 a00 GPU0 t=60C fan=60%, GPU1 t=54C fan=55%, GPU2 t=56C fan=56%, GPU3 t=60C fan=60%, GPU4 t=51C fan=51%, GPU5 t=56C fan=55%
07:52:47:306 a00 em hbt: 0, fm hbt: 0,
07:52:47:309 a00 watchdog - thread 0 (gpu0), hb time 31
07:52:47:311 a00 watchdog - thread 1 (gpu0), hb time 109
07:52:47:313 a00 watchdog - thread 2 (gpu1), hb time 8609
07:52:47:315 a00 watchdog - thread 3 (gpu1), hb time 8609
07:52:47:317 a00 watchdog - thread 4 (gpu2), hb time 8609
07:52:47:319 a00 watchdog - thread 5 (gpu2), hb time 8625
07:52:47:321 a00 watchdog - thread 6 (gpu3), hb time 125
07:52:47:323 a00 watchdog - thread 7 (gpu3), hb time 63
07:52:47:326 a00 watchdog - thread 8 (gpu4), hb time 8625
07:52:47:328 a00 watchdog - thread 9 (gpu4), hb time 8625
07:52:47:329 a00 watchdog - thread 10 (gpu5), hb time 79
07:52:47:331 a00 watchdog - thread 11 (gpu5), hb time 16
07:52:47:334 a00 WATCHDOG: GPU error, you need to restart miner :(
07:52:48:439 a00 Restarting OK, exit...
All GPU's have 8GB ram, I have plenty of Virtual memory set (~16gb) Any ideas? |
|
|
|
|
|
TechPark
|
|
July 05, 2017, 07:31:18 AM |
|
Have anyone performance drop with RX 570 in DAG 132?
DAG 129: 27.8MH/s
DAG 130: 27.6MH/s
DAG 131: 27.3MH/s
DAG 132: 26.5MH/s
I've to try bios reflash and OC memory to 1900~2000 but still no hope.
seriously, are you living on Mars or what? Is mining on Mars profitable? I hear latency is killing it there. Nah, latency is bearable but the temperature swings a lot - too hot during the day and too cold at nights... |
|
|
|
|
JustCauseBIH
Member
Offline
Activity: 91
Merit: 10
|
|
July 05, 2017, 07:57:35 AM |
|
Has anyone done a computation of Mr. Claymores total earnings to date? Pretty safe to safe hes a billionaire about now right?
Why is that question? Do you think that his work should be free? Do you think that his software should give you money for free? Lets be real people, just because someone had idea and knowledge does not mean that you can shit about it. |
|
|
|
|
AlainC
Member
Offline
Activity: 91
Merit: 10
|
|
July 05, 2017, 08:12:08 AM |
|
Has anyone done a computation of Mr. Claymores total earnings to date? Pretty safe to safe hes a billionaire about now right?
Why is that question? Do you think that his work should be free? Do you think that his software should give you money for free? Lets be real people, just because someone had idea and knowledge does not mean that you can shit about it. I have been paid for optimizing finance (ALM,Pricing) HPC applications (at time 500GFlop was occupying a full floor), and I respect end enjoy the price of work. This is why I trust him to solve DAG/TLB trashing, if it can be. IF (not optimistic). |
|
|
|
|
|
platinum4
|
|
July 05, 2017, 08:26:43 AM |
|
@ Claymore 6 x 1070 rig, Have 4 other rigs the same that are fine, This rig always kicks out CUDA 11 error.. Heres log... 07:52:16:940 a58
07:52:16:941 a58 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
07:52:16:944 a58 º Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.6 º
07:52:16:946 a58 ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
07:52:16:947 a58
07:52:17:154 a58 ETH: 1 pool is specified
07:52:17:156 a58 Main Ethereum pool is eu1.ethermine.org:4444
07:52:17:157 a58 DCR: 0 pool is specified
07:52:18:009 a58 OpenCL platform: AMD Accelerated Parallel Processing
07:52:18:013 a58 OpenCL platform: NVIDIA CUDA
07:52:18:018 a58 No AMD cards in the list.
07:52:19:076 a58 CUDA initializing...
07:52:19:078 a58 NVIDIA Cards available: 6
07:52:19:081 a58 CUDA Driver Version/Runtime Version: 8.0/8.0
07:52:19:084 a58 GPU #0: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1
07:52:19:087 a58 GPU #1: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1
07:52:19:090 a58 GPU #2: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1
07:52:19:094 a58 GPU #3: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1
07:52:19:097 a58 GPU #4: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1
07:52:19:102 a58 GPU #5: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1
07:52:19:105 a58 Total cards: 6
07:52:27:218 a58 No AMD cards in the list, ADL library will not be used.
07:52:27:231 a58 NVML version: 8.382.53
07:52:28:752 c10 ETH: Stratum - connecting to 'eu1.ethermine.org' <91.121.167.111> port 4444
07:52:28:778 c10 send: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["0x80abe5428332f49df57fbdce451d00a6781976f4.bill1", "x"], "id": 2, "method": "eth_submitLogin"}
07:52:28:780 c10 ETH: Stratum - Connected (eu1.ethermine.org:4444)
07:52:28:804 c10 got 39 bytes
07:52:28:805 c10 buf: {"id":2,"jsonrpc":"2.0","result":true}
07:52:28:807 c10 parse packet: 38
07:52:28:809 c10 ETH: Authorized
07:52:28:811 c10 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
07:52:28:813 c10 new buf size: 0
07:52:28:826 a58 No pool specified for Decred! Ethereum-only mining mode is enabled
07:52:28:829 a58 ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
07:52:28:834 a58 ETH: eth-proxy stratum mode
07:52:28:836 a58 Watchdog enabled
07:52:28:837 c10 got 248 bytes
07:52:28:841 c10 buf: {"id":3,"jsonrpc":"2.0","result":["0xd53e4e3c073025660dc7f9435de130d56f22eaebe8188828408732229e003195","0x39c5f107628ba618a6a867dd78baf80d6d04ace84c3835886f198872e48f084a","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x3cae10"]}
07:52:28:842 c10 parse packet: 247
07:52:28:844 c10 ETH: job changed
07:52:28:846 c10 new buf size: 0
07:52:28:850 a58 Remote management (READ-ONLY MODE) is enabled on port 3333
07:52:28:853 a58
07:52:28:938 fe0 Setting DAG epoch #132...
07:52:31:355 efc Setting DAG epoch #132 for GPU3
07:52:31:355 fe0 Setting DAG epoch #132 for GPU5
07:52:31:361 f7c Setting DAG epoch #132 for GPU4
07:52:31:358 efc Create GPU buffer for GPU3
07:52:31:358 5c4 Setting DAG epoch #132 for GPU2
07:52:31:358 a98 Setting DAG epoch #132 for GPU1
07:52:31:372 a3c Setting DAG epoch #132 for GPU0
07:52:31:374 f7c Create GPU buffer for GPU4
07:52:31:377 a98 Create GPU buffer for GPU1
07:52:31:383 a3c Create GPU buffer for GPU0
07:52:31:386 fe0 Create GPU buffer for GPU5
07:52:31:389 5c4 Create GPU buffer for GPU2
07:52:32:633 5c4 CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
07:52:32:639 f7c CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
07:52:32:642 a98 CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
07:52:35:639 5c4 Set global fail flag, failed GPU2
07:52:35:641 5c4 GPU 2 failed
07:52:35:641 9f8 Setting DAG epoch #132 for GPU2
07:52:35:642 f7c Set global fail flag, failed GPU4
07:52:35:646 9f8 GPU 2, CUDA error 11 - cannot write buffer for DAG
07:52:35:645 a98 Set global fail flag, failed GPU1
07:52:35:651 f7c GPU 4 failed
07:52:35:654 a98 GPU 1 failed
07:52:35:650 cf0 Setting DAG epoch #132 for GPU4
07:52:35:653 a8c Setting DAG epoch #132 for GPU1
07:52:35:660 cf0 GPU 4, CUDA error 11 - cannot write buffer for DAG
07:52:35:662 a8c GPU 1, CUDA error 11 - cannot write buffer for DAG
07:52:36:208 c10 got 248 bytes
07:52:36:209 c10 buf: {"id":0,"jsonrpc":"2.0","result":["0x3b8c500dc9e31b0033f38bce1c304cdf4902eddf39e03647051f7d73ebffa1e2","0x39c5f107628ba618a6a867dd78baf80d6d04ace84c3835886f198872e48f084a","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x3cae11"]}
07:52:36:211 c10 parse packet: 247
07:52:36:213 c10 ETH: job changed
07:52:36:215 c10 new buf size: 0
07:52:36:218 c10 ETH: 07/05/17-07:52:36 - New job from eu1.ethermine.org:4444
07:52:36:220 c10 target: 0x0000000112e0be82 (diff: 4000MH), epoch 132(2.03GB)
07:52:36:222 c10 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
07:52:36:224 c10 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s
07:52:38:439 fe0 GPU5 DAG creation time - 5697 ms
07:52:38:441 fe0 Setting DAG epoch #132 for GPU5 done
07:52:38:453 efc GPU3 DAG creation time - 5715 ms
07:52:38:455 efc Setting DAG epoch #132 for GPU3 done
07:52:38:650 9f8 Set global fail flag, failed GPU2
07:52:38:652 9f8 GPU 2 failed
07:52:38:663 cf0 Set global fail flag, failed GPU4
07:52:38:666 cf0 GPU 4 failed
07:52:38:696 a3c GPU0 DAG creation time - 5949 ms
07:52:38:698 a3c Setting DAG epoch #132 for GPU0 done
07:52:38:709 a8c Set global fail flag, failed GPU1
07:52:38:711 a8c GPU 1 failed
07:52:38:849 c10 ETH: checking pool connection...
07:52:38:853 c10 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
07:52:38:874 c10 got 248 bytes
07:52:38:876 c10 buf: {"id":3,"jsonrpc":"2.0","result":["0x3b8c500dc9e31b0033f38bce1c304cdf4902eddf39e03647051f7d73ebffa1e2","0x39c5f107628ba618a6a867dd78baf80d6d04ace84c3835886f198872e48f084a","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x3cae11"]}
07:52:38:877 c10 parse packet: 247
07:52:38:879 c10 ETH: job is the same
07:52:38:881 c10 new buf size: 0
07:52:45:916 c10 got 248 bytes
07:52:45:918 c10 buf: {"id":0,"jsonrpc":"2.0","result":["0xcfe9a62a447353fbb88ab8e268a656f08682e0c3a5a34967d796225f133c1994","0x39c5f107628ba618a6a867dd78baf80d6d04ace84c3835886f198872e48f084a","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x3cae12"]}
07:52:45:920 c10 parse packet: 247
07:52:45:923 c10 ETH: job changed
07:52:45:925 c10 new buf size: 0
07:52:45:927 c10 ETH: 07/05/17-07:52:45 - New job from eu1.ethermine.org:4444
07:52:45:929 c10 target: 0x0000000112e0be82 (diff: 4000MH), epoch 132(2.03GB)
07:52:45:931 c10 ETH - Total Speed: 87.783 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
07:52:45:933 c10 ETH: GPU0 29.229 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 29.290 Mh/s, GPU4 0.000 Mh/s, GPU5 29.264 Mh/s
07:52:47:302 a00 GPU0 t=60C fan=60%, GPU1 t=54C fan=55%, GPU2 t=56C fan=56%, GPU3 t=60C fan=60%, GPU4 t=51C fan=51%, GPU5 t=56C fan=55%
07:52:47:306 a00 em hbt: 0, fm hbt: 0,
07:52:47:309 a00 watchdog - thread 0 (gpu0), hb time 31
07:52:47:311 a00 watchdog - thread 1 (gpu0), hb time 109
07:52:47:313 a00 watchdog - thread 2 (gpu1), hb time 8609
07:52:47:315 a00 watchdog - thread 3 (gpu1), hb time 8609
07:52:47:317 a00 watchdog - thread 4 (gpu2), hb time 8609
07:52:47:319 a00 watchdog - thread 5 (gpu2), hb time 8625
07:52:47:321 a00 watchdog - thread 6 (gpu3), hb time 125
07:52:47:323 a00 watchdog - thread 7 (gpu3), hb time 63
07:52:47:326 a00 watchdog - thread 8 (gpu4), hb time 8625
07:52:47:328 a00 watchdog - thread 9 (gpu4), hb time 8625
07:52:47:329 a00 watchdog - thread 10 (gpu5), hb time 79
07:52:47:331 a00 watchdog - thread 11 (gpu5), hb time 16
07:52:47:334 a00 WATCHDOG: GPU error, you need to restart miner :(
07:52:48:439 a00 Restarting OK, exit...
All GPU's have 8GB ram, I have plenty of Virtual memory set (~16gb) Any ideas? Run DDU, install 384.80 hotfix clean, reduce all PCIe slot Gens to 1, try -gser 2 and -lidag 3 as well; check environment variables; reduce memory OC. |
|
|
|
|
|
wtfonly16
|
|
July 05, 2017, 08:41:48 AM |
|
|
ye i aint bares
|
|
|
|
ToNyBroS
|
|
July 05, 2017, 09:24:13 AM |
|
Any news for new version?
|
|
|
|
|
matmator
Sr. Member
Offline
Activity: 487
Merit: 252
bou !
|
|
July 05, 2017, 11:54:52 AM |
|
@claymore
Hello with my rx 480/580 dual eth + sia
I had 500mh per gpu
I am switching to gtx 1070 and sia = 300mh
Is there a possible maj of expected to win a + can with sia?
thank you
|
go to the moon !!
|
|
|
|
huntingthesnark
|
|
July 05, 2017, 12:12:11 PM |
|
I'm having a weird issue. Claymore just waits after it starts and says OpenCL initializing... then it lists the cards and just waits.
I used to be able to fix this by restarting claymore or restarting the computer but it's not helping anymore.. it just waits every time and won't mine.. Any ideas?
Sounds like it could be hanging from too high of an overclock. Try backing down the core clock by 10 MHz and the memory clock by 50 MHz and see if it helps. Thanks. I narrowed it down to 1 card but that card messes it up even at stock clocks/volts. I figured it out by trying just the first card using -di 0 and it actually loaded correctly and mined. Then tried -di 01 and it didn't work.. then I tried all but that 1.. -di 02345 and it worked! so it's 1 card in particular giving me and issue.. it's actually the same card that kept hanging every few days stopping the rig from mining. I'll have to check the riser and maybe try that specific card in another rig to see what's up I've been having a similar issue - everything fine for weeks, then that same process., even on stock clocks. Did you work out if it was the card or the riser? (obvs I'm hoping for a riser swap fix ;-) |
|
|
|
|
zorvalth
|
|
July 05, 2017, 12:12:57 PM |
|
@claymore
Hello with my rx 480/580 dual eth + sia
I had 500mh per gpu
I am switching to gtx 1070 and sia = 300mh
Is there a possible maj of expected to win a + can with sia?
thank you
Are you too lazy to click "+" button 20-30 times? |
|
|
|
|
|
FFI2013
|
|
July 05, 2017, 01:25:55 PM |
|
I'm dual mining Eth and sia on win 10 16.9.2 drivers msi rx470 4gb and 8gb modded Bios I just noticed claymore is reporting the rates I should be getting but there 10-20mh less at the pool side so I switched pools and to etc but still the same issue would anyone have a suggestion should I go back to stock everything try it see what I get than mod
|
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
July 05, 2017, 01:35:09 PM |
|
I've built ASM kernels for Baffin (RX460/560) cards with good speedup for DCR/SIA/PASC and may be 1% for ETH, now I check what I can do for Nvidia cards. New version will be available in 2-4 days.
|
|
|
|
Frippster
Newbie
Offline
Activity: 27
Merit: 0
|
|
July 05, 2017, 02:09:57 PM |
|
I'm dual mining Eth and sia on win 10 16.9.2 drivers msi rx470 4gb and 8gb modded Bios I just noticed claymore is reporting the rates I should be getting but there 10-20mh less at the pool side so I switched pools and to etc but still the same issue would anyone have a suggestion should I go back to stock everything try it see what I get than mod
Run it for an hour or two, hit S and check for incorrect shares (not rejected). It can happen with latencies pushed too high in the bios. I had this issue when i straped a 580 with 1500 timings, ending upp in 10% of the shares for that gpu being burnt. |
|
|
|
|
|
|
|
FFI2013
|
|
July 05, 2017, 02:34:56 PM |
|
I'm dual mining Eth and sia on win 10 16.9.2 drivers msi rx470 4gb and 8gb modded Bios I just noticed claymore is reporting the rates I should be getting but there 10-20mh less at the pool side so I switched pools and to etc but still the same issue would anyone have a suggestion should I go back to stock everything try it see what I get than mod
Run it for an hour or two, hit S and check for incorrect shares (not rejected). It can happen with latencies pushed too high in the bios. I had this issue when i straped a 580 with 1500 timings, ending upp in 10% of the shares for that gpu being burnt. Thank You when I get home I'll see what I come up with |
|
|
|
|
|
