Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[shadow1975]

You need to update to Windows 10 Creator's Editon for Claymore to work properly in Windows.

?

i run claymore cdm on win7 with 5 gpus: 290, 2x470, 460, 1070.

no problems at all. i have 8 gb mem vs your 4 however. throw another 4 gb stick in.
 

That's was solution. I added 4gb stick and now it's working with 4 GTX 1070 cards.

[1713859223]

1713859223

[1713859223]

1713859223

[1713859223]

1713859223

[1713859223]

1713859223

[jamesmbond]

is your miner authorized? Currently I don't mine ETH+DCR at this time, but I ran it for a minute and my "worker" was successfully authorized at both mining pools.

I never got the "authorized" message in the log like I always do with ETH mining.   So I assume the pool isn't letting me in.   I have created the worker at suprnova (see below) but of course the "active", Khash, etc. are blank as I've never truly connected yet.  My username for suprnova is bobsmith (not my real name/login to protect my identity) and I named my worker 3.  So that should mean my login.worker is bobsmith.3 which even then suprnova 'worker' settings page tells me (see below).

WORKER CONFIGURATION
Worker Login   Worker Password   Active   Monitor   Khash/s   Difficulty   Action
bobsmith.3        x

This is the command line in my start.bat:
EthDcrMiner64.exe -epool us.ubiqpool.io:8008 -ewal 0x91AaaABDa75b55AFB3CE62f262A648886A445b92 -epsw x -eworker minr3 -dcoin dcr -dpool dcr.suprnova.cc:3252 -dwal bobsmith.3 -dpsw x -allpools 1

I specify my login.worker but I still always get the same error:
 Socket was closed remotely (by pool)
 DCR: Job timeout, disconnect, retry in 20 sec...

I have now tried zpool.ca, decredpool.org, and suprnova.cc and all three get the same error message.   zpool.ca doesn't ask for login.worker rather just a -dwal mybitcoinaddress but I still get same error.  For decredpool and suprnova, they both have basically the same "create worker" screen/function (almost identical web pages between these two pools).

So an update.  I changed my start.bat settings to point to eth.suprnova.cc:5005 and also dcr.suprnova.cc:3252 per the instructions on suprnova's site.  My ETH authenticates but the Decred still does not even though they are literally the same miner/worker that I created on suprnova web site under my account    I'm using Claymore v9.7 and even downloaded new copy of it to make sure--still Decred refuses to let me in.   

  try     -dpool stratum+tcp://dcr.suprnova.cc:3252 -dwal username.password -dpsw x

I get the same result with or without the "stratum+tcp://" part.  Says connect to dcr.suprnova.cc:3252 but never get the "authorized" for Decred/DCR like I do for my same login/user account on supernova that works for ETH mining.   The fact that the same "socket was closed remotely (by pool)" occurs for EVERY Decred pool I try to use (3 so far) --and I get same error--not sure what I'm doing wrong or is wrong with Claymore dual mining on v9.7

Anyone else using claymore to dual mine Decred--what actually works ?

[jamesmbond]

Seriously folks.  This Claymore v9.7 DOES NOT DUAL MINE Ether+Decred anymore.    I followed every instruction and every example found on this post and Internet.  Every pool (tried 4 of them now) produces the same error but ONLY for Decred--Eth mines just fine.

 Socket was closed remotely (by pool)
 DCR: Job timeout, disconnect, retry in 20 sec...

This is the command line in my start.bat:
EthDcrMiner64.exe -epool us.ubiqpool.io:8008 -ewal 0x91AaaABDa75b55AFB3CE89f262A648886A445b92 -epsw x -eworker minr3 -dcoin dcr -dpool dcr.suprnova.cc:3252 -dwal bobsmith.3 -dpsw x -allpools 1

I've tried "stratum+tcp://" in front of the dcrr.suprvnova.cc:3252 but doesn't matter (default is stratum anyway).  i've tried 3 different accounts on suprnova, multiple workers/names, and 4 different pool providers -- EVERY time I get the same error from claymore.   I tried this on 3 different fully functioning miner rigs running same Claymore v9.7/Windows with same results.

Is anyone actually running DUAL MINING ETHER+DECRED successful right now with v9.7 ??

[DD47]

.

[P00P135]

Seriously folks.  This Claymore v9.7 DOES NOT DUAL MINE Ether+Decred anymore.    I followed every instruction and every example found on this post and Internet.  Every pool (tried 4 of them now) produces the same error but ONLY for Decred--Eth mines just fine.

 Socket was closed remotely (by pool)
 DCR: Job timeout, disconnect, retry in 20 sec...

This is the command line in my start.bat:
EthDcrMiner64.exe -epool us.ubiqpool.io:8008 -ewal 0x91AaaABDa75b55AFB3CE89f262A648886A445b92 -epsw x -eworker minr3 -dcoin dcr -dpool dcr.suprnova.cc:3252 -dwal bobsmith.3 -dpsw x -allpools 1

I've tried "stratum+tcp://" in front of the dcrr.suprvnova.cc:3252 but doesn't matter (default is stratum anyway).  i've tried 3 different accounts on suprnova, multiple workers/names, and 4 different pool providers -- EVERY time I get the same error from claymore.   I tried this on 3 different fully functioning miner rigs running same Claymore v9.7/Windows with same results.

Is anyone actually running DUAL MINING ETHER+DECRED successful right now with v9.7 ??

Never tried dcred, did you start with the basics from suprnovas site?

Claymore command for merged ETH + DCR:
ethdcrminer64.exe -epool eth.suprnova.cc:5000 -ewal suprnova.1 -epsw x -esm 3 -dpool dcr.suprnova.cc:3252 -dwal suprnova.1 -dpsw x -allpools 1

[KGV]

Seriously folks.  This Claymore v9.7 DOES NOT DUAL MINE Ether+Decred anymore.    I followed every instruction and every example found on this post and Internet.  Every pool (tried 4 of them now) produces the same error but ONLY for Decred--Eth mines just fine.

 Socket was closed remotely (by pool)
 DCR: Job timeout, disconnect, retry in 20 sec...

This is the command line in my start.bat:
EthDcrMiner64.exe -epool us.ubiqpool.io:8008 -ewal 0x91AaaABDa75b55AFB3CE89f262A648886A445b92 -epsw x -eworker minr3 -dcoin dcr -dpool dcr.suprnova.cc:3252 -dwal bobsmith.3 -dpsw x -allpools 1

I've tried "stratum+tcp://" in front of the dcrr.suprvnova.cc:3252 but doesn't matter (default is stratum anyway).  i've tried 3 different accounts on suprnova, multiple workers/names, and 4 different pool providers -- EVERY time I get the same error from claymore.   I tried this on 3 different fully functioning miner rigs running same Claymore v9.7/Windows with same results.

Is anyone actually running DUAL MINING ETHER+DECRED successful right now with v9.7 ??

All is fine. Check you settings !
Here is example.
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal XXXXXXXXXXXXXXXXXXXX -epsw x -dpool stratum+tcp://dcr.suprnova.cc:3252 -dwal XX.XX -dpsw XXXXXX -dcri 30

[MinerosYV]

Any1 running rig with multiple GPUs on old lga775 boards?

Every time I plug riser into pcie x16 slot, the system won't start.
What could be the reason for that?
when pluged only pcie x1 works normal.
I tried changing video setting in bios (onboard, pcie...)

I have a Vostro 230 775 mobo with a 500 watts PSU running a couple of RX 480 8 GB with Ver 6 raisers, did have to update the bios for it to work.
Strangely enough have a Vostro 260 with a 1151 board and a i3 on it, as soon as I plug a 480 in to the mobo the computer wont even boot, not even updating the bios

Go figures

[woodaxe]

Seriously folks.  This Claymore v9.7 DOES NOT DUAL MINE Ether+Decred anymore.    I followed every instruction and every example found on this post and Internet.  Every pool (tried 4 of them now) produces the same error but ONLY for Decred--Eth mines just fine.

 Socket was closed remotely (by pool)
 DCR: Job timeout, disconnect, retry in 20 sec...

This is the command line in my start.bat:
EthDcrMiner64.exe -epool us.ubiqpool.io:8008 -ewal 0x91AaaABDa75b55AFB3CE89f262A648886A445b92 -epsw x -eworker minr3 -dcoin dcr -dpool dcr.suprnova.cc:3252 -dwal bobsmith.3 -dpsw x -allpools 1

I've tried "stratum+tcp://" in front of the dcrr.suprvnova.cc:3252 but doesn't matter (default is stratum anyway).  i've tried 3 different accounts on suprnova, multiple workers/names, and 4 different pool providers -- EVERY time I get the same error from claymore.   I tried this on 3 different fully functioning miner rigs running same Claymore v9.7/Windows with same results.

Is anyone actually running DUAL MINING ETHER+DECRED successful right now with v9.7 ??

All is fine. Check you settings !
Here is example.
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal XXXXXXXXXXXXXXXXXXXX -epsw x -dpool stratum+tcp://dcr.suprnova.cc:3252 -dwal XX.XX -dpsw XXXXXX -dcri 30

i see your trying to mine ubiq and decred  this is my exact bat file for doing that  which im mining on one rig notice its allcoins 1

echo off
cd c:\claymore\9.7
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -dcri 26,26,26 -epool stratum+tcp://eu.ubiqpool.io:8008 -ewal walletaddress -epsw x -eworker rig1 -allcoins 1 -dpool stratum+tcp://dcr.suprnova.cc:3252 -dwal worker.password -dpsw x

[Skol600ml]

Seriously folks.  This Claymore v9.7 DOES NOT DUAL MINE Ether+Decred anymore.    I followed every instruction and every example found on this post and Internet.  Every pool (tried 4 of them now) produces the same error but ONLY for Decred--Eth mines just fine.

 Socket was closed remotely (by pool)
 DCR: Job timeout, disconnect, retry in 20 sec...

This is the command line in my start.bat:
EthDcrMiner64.exe -epool us.ubiqpool.io:8008 -ewal 0x91AaaABDa75b55AFB3CE89f262A648886A445b92 -epsw x -eworker minr3 -dcoin dcr -dpool dcr.suprnova.cc:3252 -dwal bobsmith.3 -dpsw x -allpools 1

I've tried "stratum+tcp://" in front of the dcrr.suprvnova.cc:3252 but doesn't matter (default is stratum anyway).  i've tried 3 different accounts on suprnova, multiple workers/names, and 4 different pool providers -- EVERY time I get the same error from claymore.   I tried this on 3 different fully functioning miner rigs running same Claymore v9.7/Windows with same results.

Is anyone actually running DUAL MINING ETHER+DECRED successful right now with v9.7 ??

I'm mining eth and decred for weeks. I just tested ubiq decred and got no problem. I'm using coinmine.pl.

Nothing wrong with 9.7. Just try 9.5 or 9.6 and see if it works.

It's Not WORKER.PASSWORD it's LOGIN.WORKER -epsw PASSWORD (worker's password, not login password)

[jamesmbond]

Seriously folks.  This Claymore v9.7 DOES NOT DUAL MINE Ether+Decred anymore.    I followed every instruction and every example found on this post and Internet.  Every pool (tried 4 of them now) produces the same error but ONLY for Decred--Eth mines just fine.

 Socket was closed remotely (by pool)
 DCR: Job timeout, disconnect, retry in 20 sec...

This is the command line in my start.bat:
EthDcrMiner64.exe -epool us.ubiqpool.io:8008 -ewal 0x91AaaABDa75b55AFB3CE89f262A648886A445b92 -epsw x -eworker minr3 -dcoin dcr -dpool dcr.suprnova.cc:3252 -dwal bobsmith.3 -dpsw x -allpools 1

I've tried "stratum+tcp://" in front of the dcrr.suprvnova.cc:3252 but doesn't matter (default is stratum anyway).  i've tried 3 different accounts on suprnova, multiple workers/names, and 4 different pool providers -- EVERY time I get the same error from claymore.   I tried this on 3 different fully functioning miner rigs running same Claymore v9.7/Windows with same results.

Is anyone actually running DUAL MINING ETHER+DECRED successful right now with v9.7 ??

I'm mining eth and decred for weeks. I just tested ubiq decred and got no problem. I'm using coinmine.pl.

Nothing wrong with 9.7. Just try 9.5 or 9.6 and see if it works.

It's Not WORKER.PASSWORD it's LOGIN.WORKER -epsw PASSWORD (worker's password, not login password)

Glad it is working for someone.  Yes I am using login.workername with -epsw password.  This login.workername works fine for Ethereum to, for example my suprnova.cc pool but I use the same login.workername for DRC mining (-dpool login.workername -dpsw x) and get that error.  So this confirms my login.workername syntax is correct but still getting error no matter what I try and on 3 different rigs.

[ozzy1926]

I have celeron g4400 CPU with 8gb ram using win10 and system uses 95 watt from wall I wonder is that high usage or should I set the windows power management on  when using miner to save electricity usage?

If that 95 is with some cards attached - it is good. Even without cards, Haswell takes 55-60w, skylake 35...

Ty also I wonder can i run more than 8 gpu using win 10 because I can't make the 9th card recognize

[madrak]

Is anyone using WebRoot's SecureAnywhere with Claymore's miner?  Any time I try to run the miner with SecureAnywhere enabled after a certain amount of time execution stops, but if I completely disable SecureAnywhere the miner is able to run without issue.  Now, I'd rather not have to disable my security software in order to be able to mine.  I have added the ethdcrminer64.exe file in the main directory, the cuda7.5 directory and the cuda 6.5 directory to the exclude list, but the issue is still happening.

Does anyone have any suggestions, or am I stuck?

-Madrak

[Skol600ml]

Seriously folks.  This Claymore v9.7 DOES NOT DUAL MINE Ether+Decred anymore.    I followed every instruction and every example found on this post and Internet.  Every pool (tried 4 of them now) produces the same error but ONLY for Decred--Eth mines just fine.

 Socket was closed remotely (by pool)
 DCR: Job timeout, disconnect, retry in 20 sec...

This is the command line in my start.bat:
EthDcrMiner64.exe -epool us.ubiqpool.io:8008 -ewal 0x91AaaABDa75b55AFB3CE89f262A648886A445b92 -epsw x -eworker minr3 -dcoin dcr -dpool dcr.suprnova.cc:3252 -dwal bobsmith.3 -dpsw x -allpools 1

I've tried "stratum+tcp://" in front of the dcrr.suprvnova.cc:3252 but doesn't matter (default is stratum anyway).  i've tried 3 different accounts on suprnova, multiple workers/names, and 4 different pool providers -- EVERY time I get the same error from claymore.   I tried this on 3 different fully functioning miner rigs running same Claymore v9.7/Windows with same results.

Is anyone actually running DUAL MINING ETHER+DECRED successful right now with v9.7 ??

I'm mining eth and decred for weeks. I just tested ubiq decred and got no problem. I'm using coinmine.pl.

Nothing wrong with 9.7. Just try 9.5 or 9.6 and see if it works.

It's Not WORKER.PASSWORD it's LOGIN.WORKER -epsw PASSWORD (worker's password, not login password)

Glad it is working for someone.  Yes I am using login.workername with -epsw password.  This login.workername works fine for Ethereum to, for example my suprnova.cc pool but I use the same login.workername for DRC mining (-dpool login.workername -dpsw x) and get that error.  So this confirms my login.workername syntax is correct but still getting error no matter what I try and on 3 different rigs.

Try -dpool login.workername -epsw x or -dpool login.workername.password

I tried suprnova few months ago (when i was a noobie) and failed, i succeed with decredpool.org and now i'm using coinmine.pl.

[jamesmbond]

Seriously folks.  This Claymore v9.7 DOES NOT DUAL MINE Ether+Decred anymore.    I followed every instruction and every example found on this post and Internet.  Every pool (tried 4 of them now) produces the same error but ONLY for Decred--Eth mines just fine.

 Socket was closed remotely (by pool)
 DCR: Job timeout, disconnect, retry in 20 sec...

This is the command line in my start.bat:
EthDcrMiner64.exe -epool us.ubiqpool.io:8008 -ewal 0x91AaaABDa75b55AFB3CE89f262A648886A445b92 -epsw x -eworker minr3 -dcoin dcr -dpool dcr.suprnova.cc:3252 -dwal bobsmith.3 -dpsw x -allpools 1

I've tried "stratum+tcp://" in front of the dcrr.suprvnova.cc:3252 but doesn't matter (default is stratum anyway).  i've tried 3 different accounts on suprnova, multiple workers/names, and 4 different pool providers -- EVERY time I get the same error from claymore.   I tried this on 3 different fully functioning miner rigs running same Claymore v9.7/Windows with same results.

Is anyone actually running DUAL MINING ETHER+DECRED successful right now with v9.7 ??

I'm mining eth and decred for weeks. I just tested ubiq decred and got no problem. I'm using coinmine.pl.

Nothing wrong with 9.7. Just try 9.5 or 9.6 and see if it works.

It's Not WORKER.PASSWORD it's LOGIN.WORKER -epsw PASSWORD (worker's password, not login password)

Glad it is working for someone.  Yes I am using login.workername with -epsw password.  This login.workername works fine for Ethereum to, for example my suprnova.cc pool but I use the same login.workername for DRC mining (-dpool login.workername -dpsw x) and get that error.  So this confirms my login.workername syntax is correct but still getting error no matter what I try and on 3 different rigs.

Try -dpool login.workername -epsw x or -dpool login.workername.password

I tried suprnova few months ago (when i was a noobie) and failed, i succeed with decredpool.org and now i'm using coinmine.pl.

Thanks, figured it out now.   Strangely a firewall issue on my router.   Didn't even know it was turned on (by default).  Seems I was connecting to DCR (nomatter which mining pool) but the error message in claymore was "blaming" the pool for remotely disconnecting me.  Was the firewall somehow.   Now I'm connecting fine.
Thanks everyone for the help.

[Bojcha]

I have celeron g4400 CPU with 8gb ram using win10 and system uses 95 watt from wall I wonder is that high usage or should I set the windows power management on  when using miner to save electricity usage?

If that 95 is with some cards attached - it is good. Even without cards, Haswell takes 55-60w, skylake 35...

Ty also I wonder can i run more than 8 gpu using win 10 because I can't make the 9th card recognize

No you can't. In windows10 you can use max 8 AMD or 8 NV cards, or 8 of both.
So you can have 16 cards but half amd and half nv max.

[Saphire]

I am using Claymore v9.7 for Dual Mining (ETH+SIA)

My Rig shows it is working properly and mining as Dual Mode (135 Mh/s ETH + 2200 Mh/s SIA)

But when i look at ethermine.org Dadhboard it seems my rig doesnt work and stopped.

And i look at the sia.nanopool.org it shoes my rig works fine.

Why ETH is like that problem? My -dcri value is 13.

thanks.

[Nightwolf81]

I am using Claymore v9.7 for Dual Mining (ETH+SIA)

My Rig shows it is working properly and mining as Dual Mode (135 Mh/s ETH + 2200 Mh/s SIA)

But when i look at ethermine.org Dadhboard it seems my rig doesnt work and stopped.

And i look at the sia.nanopool.org it shoes my rig works fine.

Why ETH is like that problem? My -dcri value is 13.

thanks.

Did you set the reporting algorithm to qtminer?

[Nightwolf81]

Anyone already tried the new driver from nvidia?

Greetz Wolf

[cryptolelefla]

Anyone already tried the new driver from nvidia?

Greetz Wolf

they working fine on my 1060

[lmlim]

Hi Mr Claymore,

I am using claymore miner as a 3rd party miner from nicehash. I have been using for a couple months.
However, This morning from ~1.45AM to ~4.15AM my mining work was 0 from all of my rigs. but all rigs was running ok.
seems like my wallet has been replaced temporarily for 2.5hrs, then reverted back.

I had suspicion that i had been hacked, then i remember clymore miner got management port enabled by default.
i know how to disable it, if it is used by command prompt. but clueless if it is run from nicehash GUI.
I already searched possible options from nicehash gui for disabling management port, extra launch param didnt work for me.

please help!

===Martin