Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[TigTex]

If you are having problems with AMD and ULPS, install windows 10 LTSB 2016. It has a 10 year support without installing a new build every 6 months and absolutely 0 windows apps that use your system's resources while mining.
Because it's based on windows 1607, you won't have any issues that windows 1803 is causing. Just install and forget, forever

[1714079217]

1714079217

[AzzAz]

Hello,

I have issue with my rx480 mining rig, it runs before perfect, but i ahve to change ssd, and after the new win10 installation, the miner stuck after detecting pools.

I use latest win10 ltsb, asrock h81 btco pro r2.0 mobo. Onboard display is selected, and gen1 also.
I see my cards at the device manager, also installed the chipset driver, but the miner cannot start.

OverdriveNtool also detect my gpus. Change the mobo and the cpu as well, it isnt solve the issue, any idea?
I think something missing, but i dont have a clue, out of ideas

Disable ULPS from regedit... also, just a little patience, it's not stuck, it just takes a little more time than usual but if you disable the ULPS then it should start faster

Just put 0 instead of 1 and do a restart.

I forget it to write, vut i also disable ULPS, i leave the miner running for 2-4 hours, and it gives, the claymore sign and pools again and again

Then maybe use DDU in Safe mode, disable ULPS again and see if it's working... if not, then is something else wrong there.

I have two rigs that have me baffled. Both are exact copies of each other, other than cards, but anyway all they do is https://ibb.co/cnLC8T which finally goes to https://ibb.co/gvf12o  The 5 minute timer just goes on and on. I have set the EnableULPS to 0 but this prob persists. Any ideas? Sorry but the forum didn't like the image host. Dunno why, but you can copy the links to see the pics.

I have no ideea other than do a DDU in safe mode, install latest drivers and set ULPS to 0 for each card. Are AMD or Nvidia? You have this issue after latest Win10 update to v1803?

Neither rig has taken the v1803 update. At this point I have tried 9 different drivers from the blockchain driver forward. I've used regedit to search "EnableULPS" and set it to zero.(This location can be in different places with different drivers, so use the regedit search feature). Rebooted and CLaymore does the same thing. Nicehash 1.9.0.3 doesn't detect any AMD cards. Right now both rigs are running the flakeyass SMOS, 6 of 8 cards on each rig. SMOS drops caards and spits out too many errors to risk running all 8.

I'm recovering from colon cancer surgery, so it is quite difficult for me to run back and forth testing rigs. I hope someone finds the solution. I did a fresh install of win10 pro disconnected from the net, stopped updates and a host of spying shit, installed drivers and all 8 are detected. Disabled ULPS, ran the ati patcher, set all the cards to compute, set virtual memory to 16k-32k. Connected the net and fired up Claymore only to see the same shit I have been seeing........it won't initialize. Tried nicehash 1.9.0.3 and it still doesn't detect the AMD cards. Back to SMOS and 6 cards until someone finds a solution.

No, it is not always in the same location. Using the newest drivers from AMD it moved from \0000 to \0001. It doesn't exist at \0000 in the latest driver. I know because I added a DWORD value for it set to 0 and that did nothing. So I used the regedit search and found it at \0001.

if miner do not see any cards- it is driver. DDU in safe mode and try again. If you use 18.x.x drivers, let windows updates finish (with 365days delay for feature updates). It needs all updates (except 1803) to work properly with new drivers. Yes, patch, restart, switch to compute...

i have 18.5.1, 18.3.4, 18.3.1 tested this way, working perfectly. Some others too ( 18.1 and 18.2 and 18.3 )

And when fresh install, after you install driver - you can connect net to speed up updating

[sebas1382000]

Hello guys!.


I need help to learn how to set up the miner


The simple mining configuration for ethereum is -wd 1 -r 1 -epool pool: port -ewal user -esm 0 -epsw x -allpools 1 -asm 1 -mport 127.0.0.1:3333


What values ​​should I configure if I only want to use ethermine?

[74hawksfan]

I'm using 11.8 on a 13 AMD RX580 card rig, I have tried mining ETH on Suprnova, Ubiq on Suprnova and ubiwpool...and I cannot get the proper payout.
According to Whattomine I should be getting .03 ETH every 24 hours, I mined it for 3 days and got .03.  And on Ubiq I should be getting 10-12 every 24 hours but I've mined that for 3 days now as well and haven't even gotten 10...
Mh/s is good at 393, anyone else experiencing this?

[tenmoi]

I'm using 11.8 on a 13 AMD RX580 card rig, I have tried mining ETH on Suprnova, Ubiq on Suprnova and ubiwpool...and I cannot get the proper payout.
According to Whattomine I should be getting .03 ETH every 24 hours, I mined it for 3 days and got .03.  And on Ubiq I should be getting 10-12 every 24 hours but I've mined that for 3 days now as well and haven't even gotten 10...
Mh/s is good at 393, anyone else experiencing this?

It depends on the difficulty. Right now you can get only 0.2 eth/ day.

[BogdanCo]

Hello,

I have issue with my rx480 mining rig, it runs before perfect, but i ahve to change ssd, and after the new win10 installation, the miner stuck after detecting pools.

I use latest win10 ltsb, asrock h81 btco pro r2.0 mobo. Onboard display is selected, and gen1 also.
I see my cards at the device manager, also installed the chipset driver, but the miner cannot start.

OverdriveNtool also detect my gpus. Change the mobo and the cpu as well, it isnt solve the issue, any idea?
I think something missing, but i dont have a clue, out of ideas

Disable ULPS from regedit... also, just a little patience, it's not stuck, it just takes a little more time than usual but if you disable the ULPS then it should start faster

Just put 0 instead of 1 and do a restart.

I forget it to write, vut i also disable ULPS, i leave the miner running for 2-4 hours, and it gives, the claymore sign and pools again and again

Then maybe use DDU in Safe mode, disable ULPS again and see if it's working... if not, then is something else wrong there.

I have two rigs that have me baffled. Both are exact copies of each other, other than cards, but anyway all they do is https://ibb.co/cnLC8T which finally goes to https://ibb.co/gvf12o  The 5 minute timer just goes on and on. I have set the EnableULPS to 0 but this prob persists. Any ideas? Sorry but the forum didn't like the image host. Dunno why, but you can copy the links to see the pics.

I have no ideea other than do a DDU in safe mode, install latest drivers and set ULPS to 0 for each card. Are AMD or Nvidia? You have this issue after latest Win10 update to v1803?

Neither rig has taken the v1803 update. At this point I have tried 9 different drivers from the blockchain driver forward. I've used regedit to search "EnableULPS" and set it to zero.(This location can be in different places with different drivers, so use the regedit search feature). Rebooted and CLaymore does the same thing. Nicehash 1.9.0.3 doesn't detect any AMD cards. Right now both rigs are running the flakeyass SMOS, 6 of 8 cards on each rig. SMOS drops caards and spits out too many errors to risk running all 8.

I'm recovering from colon cancer surgery, so it is quite difficult for me to run back and forth testing rigs. I hope someone finds the solution. I did a fresh install of win10 pro disconnected from the net, stopped updates and a host of spying shit, installed drivers and all 8 are detected. Disabled ULPS, ran the ati patcher, set all the cards to compute, set virtual memory to 16k-32k. Connected the net and fired up Claymore only to see the same shit I have been seeing........it won't initialize. Tried nicehash 1.9.0.3 and it still doesn't detect the AMD cards. Back to SMOS and 6 cards until someone finds a solution.

No, it is not always in the same location. Using the newest drivers from AMD it moved from \0000 to \0001. It doesn't exist at \0000 in the latest driver. I know because I added a DWORD value for it set to 0 and that did nothing. So I used the regedit search and found it at \0001.

\0000
\0001
\0002
...
etc

are the card's number installed into your rig.... You have to turn ULPS to 0 for every card.
So if you have 8 cards then go to {4d36e968-e325-11ce-bfc1-08002be10318} and inside every folder /0000.... /0007 you must switch the ULPS to 0;
Yes, if you installed one card and then remove it and now install another one, then you can see /0000 and /0001... buy always use DDU in safe mode and then install drivers for the new card.

[Xardas2014]

Hello,

I have issue with my rx480 mining rig, it runs before perfect, but i ahve to change ssd, and after the new win10 installation, the miner stuck after detecting pools.

I use latest win10 ltsb, asrock h81 btco pro r2.0 mobo. Onboard display is selected, and gen1 also.
I see my cards at the device manager, also installed the chipset driver, but the miner cannot start.

OverdriveNtool also detect my gpus. Change the mobo and the cpu as well, it isnt solve the issue, any idea?
I think something missing, but i dont have a clue, out of ideas

Disable ULPS from regedit... also, just a little patience, it's not stuck, it just takes a little more time than usual but if you disable the ULPS then it should start faster

Just put 0 instead of 1 and do a restart.

I forget it to write, vut i also disable ULPS, i leave the miner running for 2-4 hours, and it gives, the claymore sign and pools again and again

Then maybe use DDU in Safe mode, disable ULPS again and see if it's working... if not, then is something else wrong there.

I have two rigs that have me baffled. Both are exact copies of each other, other than cards, but anyway all they do is https://ibb.co/cnLC8T which finally goes to https://ibb.co/gvf12o  The 5 minute timer just goes on and on. I have set the EnableULPS to 0 but this prob persists. Any ideas? Sorry but the forum didn't like the image host. Dunno why, but you can copy the links to see the pics.

I have no ideea other than do a DDU in safe mode, install latest drivers and set ULPS to 0 for each card. Are AMD or Nvidia? You have this issue after latest Win10 update to v1803?

Neither rig has taken the v1803 update. At this point I have tried 9 different drivers from the blockchain driver forward. I've used regedit to search "EnableULPS" and set it to zero.(This location can be in different places with different drivers, so use the regedit search feature). Rebooted and CLaymore does the same thing. Nicehash 1.9.0.3 doesn't detect any AMD cards. Right now both rigs are running the flakeyass SMOS, 6 of 8 cards on each rig. SMOS drops caards and spits out too many errors to risk running all 8.

I'm recovering from colon cancer surgery, so it is quite difficult for me to run back and forth testing rigs. I hope someone finds the solution. I did a fresh install of win10 pro disconnected from the net, stopped updates and a host of spying shit, installed drivers and all 8 are detected. Disabled ULPS, ran the ati patcher, set all the cards to compute, set virtual memory to 16k-32k. Connected the net and fired up Claymore only to see the same shit I have been seeing........it won't initialize. Tried nicehash 1.9.0.3 and it still doesn't detect the AMD cards. Back to SMOS and 6 cards until someone finds a solution.

No, it is not always in the same location. Using the newest drivers from AMD it moved from \0000 to \0001. It doesn't exist at \0000 in the latest driver. I know because I added a DWORD value for it set to 0 and that did nothing. So I used the regedit search and found it at \0001.

\0000
\0001
\0002
...
etc

are the card's number installed into your rig.... You have to turn ULPS to 0 for every card.
So if you have 8 cards then go to {4d36e968-e325-11ce-bfc1-08002be10318} and inside every folder /0000.... /0007 you must switch the ULPS to 0;
Yes, if you installed one card and then remove it and now install another one, then you can see /0000 and /0001... buy always use DDU in safe mode and then install drivers for the new card.

Ok, I have narrowed the problem down and am looking for a solution to fix it. Using gpu-z openCL is unchecked. Something is disabling openCL detection. On a fresh install of windows 10 enterprise and the latest drivers, Claymore worked for a few seconds, but I got a BSOD three times. I DDU and tried to install aug23 blockchain drivers and Claymore wouldn't initialize again. DDU and tried 17.2.1 with the same results before thinking about checking stuff with GPU-Z. GPU-Z only has the direct compute checked, the rest are unchecked. After some reading a few years back they said the intel igpu driver was bad and causing havoc with opencl. As yet I haven't solved this since it is bedtime. I have to figure out what is causing openCL detection to not work. If you have any ideas, please throw'em at me.

[BogdanCo]

Hello,

I have issue with my rx480 mining rig, it runs before perfect, but i ahve to change ssd, and after the new win10 installation, the miner stuck after detecting pools.

I use latest win10 ltsb, asrock h81 btco pro r2.0 mobo. Onboard display is selected, and gen1 also.
I see my cards at the device manager, also installed the chipset driver, but the miner cannot start.

OverdriveNtool also detect my gpus. Change the mobo and the cpu as well, it isnt solve the issue, any idea?
I think something missing, but i dont have a clue, out of ideas

Disable ULPS from regedit... also, just a little patience, it's not stuck, it just takes a little more time than usual but if you disable the ULPS then it should start faster
----
Just put 0 instead of 1 and do a restart.

I forget it to write, vut i also disable ULPS, i leave the miner running for 2-4 hours, and it gives, the claymore sign and pools again and again

Then maybe use DDU in Safe mode, disable ULPS again and see if it's working... if not, then is something else wrong there.

I have two rigs that have me baffled. Both are exact copies of each other, other than cards, but anyway all they do is https://ibb.co/cnLC8T which finally goes to https://ibb.co/gvf12o  The 5 minute timer just goes on and on. I have set the EnableULPS to 0 but this prob persists. Any ideas? Sorry but the forum didn't like the image host. Dunno why, but you can copy the links to see the pics.

I have no ideea other than do a DDU in safe mode, install latest drivers and set ULPS to 0 for each card. Are AMD or Nvidia? You have this issue after latest Win10 update to v1803?

Neither rig has taken the v1803 update. At this point I have tried 9 different drivers from the blockchain driver forward. I've used regedit to search "EnableULPS" and set it to zero.(This location can be in different places with different drivers, so use the regedit search feature). Rebooted and CLaymore does the same thing. Nicehash 1.9.0.3 doesn't detect any AMD cards. Right now both rigs are running the flakeyass SMOS, 6 of 8 cards on each rig. SMOS drops caards and spits out too many errors to risk running all 8.

I'm recovering from colon cancer surgery, so it is quite difficult for me to run back and forth testing rigs. I hope someone finds the solution. I did a fresh install of win10 pro disconnected from the net, stopped updates and a host of spying shit, installed drivers and all 8 are detected. Disabled ULPS, ran the ati patcher, set all the cards to compute, set virtual memory to 16k-32k. Connected the net and fired up Claymore only to see the same shit I have been seeing........it won't initialize. Tried nicehash 1.9.0.3 and it still doesn't detect the AMD cards. Back to SMOS and 6 cards until someone finds a solution.

No, it is not always in the same location. Using the newest drivers from AMD it moved from \0000 to \0001. It doesn't exist at \0000 in the latest driver. I know because I added a DWORD value for it set to 0 and that did nothing. So I used the regedit search and found it at \0001.

\0000
\0001
\0002
...
etc

are the card's number installed into your rig.... You have to turn ULPS to 0 for every card.
So if you have 8 cards then go to {4d36e968-e325-11ce-bfc1-08002be10318} and inside every folder /0000.... /0007 you must switch the ULPS to 0;
Yes, if you installed one card and then remove it and now install another one, then you can see /0000 and /0001... buy always use DDU in safe mode and then install drivers for the new card.

Ok, I have narrowed the problem down and am looking for a solution to fix it. Using gpu-z openCL is unchecked. Something is disabling openCL detection. On a fresh install of windows 10 enterprise and the latest drivers, Claymore worked for a few seconds, but I got a BSOD three times. I DDU and tried to install aug23 blockchain drivers and Claymore wouldn't initialize again. DDU and tried 17.2.1 with the same results before thinking about checking stuff with GPU-Z. GPU-Z only has the direct compute checked, the rest are unchecked. After some reading a few years back they said the intel igpu driver was bad and causing havoc with opencl. As yet I haven't solved this since it is bedtime. I have to figure out what is causing openCL detection to not work. If you have any ideas, please throw'em at me.

Are you using IGPU as Primary PCIE Adapter? I mean your win 10 is booting on the IGPU? If yes, try to disable from bios, boot into Win with a AMD card as primary adapter and see if it's working... I think you may have a wrong configuration in Motherboard BIOS (what model is?)

[yatatoshka]

hi friends, the miner has api?
or only at Remote manager (EthMan.exe)?
If someone knows, give a link to the topic or to examples
I'm very much helped by the example API request, the document API.txt read, but I can not understand how to send php from tcp / ip request json
if you have an example, please give me
thanks

[Ursul0]

hi friends, the miner has api?
or only at Remote manager (EthMan.exe)?
If someone knows, give a link to the topic or to examples
I'm very much helped by the example API request, the document API.txt read, but I can not understand how to send php from tcp / ip request json
if you have an example, please give me
thanks

+1 on that

[ant17]

I'm using 11.8 on a 13 AMD RX580 card rig, I have tried mining ETH on Suprnova, Ubiq on Suprnova and ubiwpool...and I cannot get the proper payout.
According to Whattomine I should be getting .03 ETH every 24 hours, I mined it for 3 days and got .03.  And on Ubiq I should be getting 10-12 every 24 hours but I've mined that for 3 days now as well and haven't even gotten 10...
Mh/s is good at 393, anyone else experiencing this?

Try using ethermine.org for ETH, you'll probably get around .03 per day with this setup

[Vann]

I like Ethermine.org as well. They are also one of the few ETH pools to offer a SSL stratum port, which reduces stale shares significantly.

[Facinat]

I like Ethermine.org as well. They are also one of the few ETH pools to offer a SSL stratum port, which reduces stale shares significantly.

Why SSL connection will reduce stale shares?

[tg88]

I like Ethermine.org as well. They are also one of the few ETH pools to offer a SSL stratum port, which reduces stale shares significantly.

Why SSL connection will reduce stale shares?

The security of ssl brings greater efficiency, this causes reduction of stale shares.

[lesjokolat]

Hello,

I have issue with my rx480 mining rig, it runs before perfect, but i ahve to change ssd, and after the new win10 installation, the miner stuck after detecting pools.

I use latest win10 ltsb, asrock h81 btco pro r2.0 mobo. Onboard display is selected, and gen1 also.
I see my cards at the device manager, also installed the chipset driver, but the miner cannot start.

OverdriveNtool also detect my gpus. Change the mobo and the cpu as well, it isnt solve the issue, any idea?
I think something missing, but i dont have a clue, out of ideas

i have used various drivers from 18.3.4 to present day 18.5.2 all work well . Can you verify when you installed amd drivers did you do so as admin?

[bobo012]

Hey

I am having a problem i have not yet seen. I am not a novice miner.
my windows defender is down, driver is amd blockchain workloads and i have patched amd pixel patcher, virtual memory is set
When i run test with claymore it just hangs like this



Anybody have an idea?
Thanks

EDIT

this is after 5 min

[AzzAz]

Hey

I am having a problem i have not yet seen. I am not a novice miner.
my windows defender is down, driver is amd blockchain workloads and i have patched amd pixel patcher, virtual memory is set
When i run test with claymore it just hangs like this



Anybody have an idea?
Thanks

EDIT

this is after 5 min

So you too got 1803-ed...

[Javi4ever]

I have problems whit my Sapphire Radeon HD 7990 6GB GDDR5.

I have already put the virtual memory in 16 but I still fail, use windows 10 ... I have desperate already, I want to mine ethereum!

http://i64.tinypic.com/ff2upu.jpg

[Tomason]

Hi guys,
Can i mine solo ETC with this miner right?
If yes, what OC you recommend for RX580 8G cards? Please help.

[vapourminer]

I have problems whit my Sapphire Radeon HD 7990 6GB GDDR5.

I have already put the virtual memory in 16 but I still fail, use windows 10 ... I have desperate already, I want to mine ethereum!

http://i64.tinypic.com/ff2upu.jpg

that card is actually 2 GPUs on one card, each with 3 GB ram. so use win7 or Linux for ethereum.

see here about 2 gpus on one card:
https://www.anandtech.com/show/6915/amd-radeon-hd-7990-review-7990-gets-official