Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Raja_MBZ]

https://bitsonline.com/ether-2-eth-block-reward/
Devs agreed on 2 ethers per block reward instead of 3 as it is now. This will happen with the coming fork in October together with a delay of the difficulty bomb by a year. Last November happened something similar, if I recall correctly. Then the reduced time for a block compensated the miners, so we got the same profit at the end. I hope it will be the same situation this October, or else the mining will end for those with expensive electricity.

Prepare to see a big GPU sell-off.

I'm now going to turn into a gamer. Is there any high-end game that requires 12 high-end GPU's at once and works with only 2 GB RAM + Pentium processor?

LOL

A couple days ago I was laughing on this post. But here comes the day when mining is no longer profitable for me: doesn't cover my electricity bill.
RX 480, 580, GTX 1070 - all now scrap metal. Anyone wants to buy?

Hmmm maybe hodl the GPUs for a little bit of time? Things can turn around in a month.

[ivanm850]

I ask for help. Previously, there was no such problem. Mining ELLA today became a problem for my GTX1050 2GB. Why do I get a DAG error?
 foto https://prnt.sc/krpqcx

[Ursul0]

hi, i have 3 rigs with 6 cards on each. asrock h81 btc pro with 6x rx580's bios modded and are all running at 31mh/s per card. i noticed tonight i have 1 rig with all 6 cards giving just 16 mh/s each. i restarted the rig but it's still the same. any ideas what that could be??

Apply this tool:

https://bitcointalk.org/index.php?topic=2815803.0

A tool? seriously? It's a single key to edit in registry: You are looking to set: "KMD_EnableInternalLargePage"=dword:00000002  in [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e968-e325-11ce-bfc1-08002be10318}\000x]
where x = your gpu number, e.g. ...\0001, ...\0002, etc

Yes. this would enable compute mode in amd driver, first better check your gpus location in regedit and ajdust

[crypper]

hi, i have 3 rigs with 6 cards on each. asrock h81 btc pro with 6x rx580's bios modded and are all running at 31mh/s per card. i noticed tonight i have 1 rig with all 6 cards giving just 16 mh/s each. i restarted the rig but it's still the same. any ideas what that could be??

Apply this tool:

https://bitcointalk.org/index.php?topic=2815803.0

A tool? seriously? It's a single key to edit in registry: You are looking to set: "KMD_EnableInternalLargePage"=dword:00000002  in [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e968-e325-11ce-bfc1-08002be10318}\000x]
where x = your gpu number, e.g. ...\0001, ...\0002, etc

Yes. this would enable compute mode in amd driver, first better check your gpus location in regedit and ajdust

Sure, it's simple if you have a mixed  rig: in the same folder (e.g., ...\0001) check for DriverDesc key: it will be either  NVidia or Radeon.
Also remember one of the folders will belong to integrated graphics.

[Call_Me_Bambi]

I ask for help. Previously, there was no such problem. Mining ELLA today became a problem for my GTX1050 2GB. Why do I get a DAG error?
 foto

The current DAG size for ELLA is 1.58GB so your card should still be able to mine ELLA https://crypt0.zone/dag-file-size/ELLA/2229636.
Some of the GPU memory is taken up by other resources (can't remember what) so you would need a bit more than 1.58GB for mining, but I don't think it would be as much as 0.43GB.
Try increasing your swap file size this might help.
To check your sytem, do a test mine on coin with a DAG of less than 2GB and see it that works, I think some of the Cryptonight variants can still do that.

ELLA has a Bitcointalk thread, you may get a better answer there,  https://bitcointalk.org/index.php?topic=2168042.1800

[new24core]

I am struggling to get my email included in the connection settings for ethermine. 

Can someone please provide a working sample ?

Thanks in advance!

[realcryptomines]

I am struggling to get my email included in the connection settings for ethermine. 

Can someone please provide a working sample ?

Thanks in advance!

you add your email on the website under the settings tab

[adaseb]

I am struggling to get my email included in the connection settings for ethermine. 

Can someone please provide a working sample ?

Thanks in advance!

I don't know how it is now but in the past the ethermine dead miner alert email always arrived late.

If you want something more instant just use the Claymore manager and add your email there. You will need some POP3 mail server and its a pain to figure out at first but its the best way to get alerts instantely if any of your rigs go down.

However keep in mind it won't work if at your location your internet is down, if its down then there is not much you can do either way. You can't mine without an internet connection anyways.

[tg88]

I am struggling to get my email included in the connection settings for ethermine. 

Can someone please provide a working sample ?

Thanks in advance!

You can configure directly in the pool.

[chanyewhau]

Hi guys, my RX480 mining rig is having a problem here.
2 out of 6 GPUs hang after 5 mins of mining with Claymore miner, please refer to the screenshot below.
The rig is powered by 2 750w psu.

I’ve tried reseating the risers and lowering the OC, but the result is the same.

Previosly the rig was running at a steady rate , after i relocated the rig, i have this problem.

Any advise is appreciated.









https://preview.ibb.co/ew35AU/6312_C615_F089_45_B7_BFFD_C04_DC9_D23410.jpg

[Call_Me_Bambi]

Hi guys, my RX480 mining rig is having a problem here.
2 out of 6 GPUs hang after 5 mins of mining with Claymore miner, please refer to the screenshot below.
The rig is powered by 2 750w psu.

I’ve tried reseating the risers and lowering the OC, but the result is the same.
Previosly the rig was running at a steady rate , after i relocated the rig, i have this problem.
Any advise is appreciated.

Two 750W power supplies should be enough to power your rig so we can, probably, rule out power problems (as a check use a power monitor on each supply - just to be sure).

A couple of things you could try.
Run the rig with only each of the 'faulty' cards individually to check if there is a problem with the cards - disconect every thing but the card under test.
Strip the rig down completely (leave CPU place) and re-build it, it's the hardware equivalent of "Have you tried switching it of and on again?", you never know what may have been knocked out of place during the move.

[chanyewhau]

Hi guys, my RX480 mining rig is having a problem here.
2 out of 6 GPUs hang after 5 mins of mining with Claymore miner, please refer to the screenshot below.
The rig is powered by 2 750w psu.

I’ve tried reseating the risers and lowering the OC, but the result is the same.
Previosly the rig was running at a steady rate , after i relocated the rig, i have this problem.
Any advise is appreciated.

https://preview.ibb.co/ew35AU/6312_C615_F089_45_B7_BFFD_C04_DC9_D23410.jpg

Two 750W power supplies should be enough to power your rig so we can, probably, rule out power problems (as a check use a power monitor on each supply - just to be sure).

A couple of things you could try.
Run the rig with only each of the 'faulty' cards individually to check if there is a problem with the cards - disconect every thing but the card under test.
Strip the rig down completely (leave CPU place) and re-build it, it's the hardware equivalent of "Have you tried switching it of and on again?", you never know what may have been knocked out of place during the move.

Thanks brother.
I’ve temporarily remove the 2 “faulty” cards for now and will try your method in awhile. Will give an update soon.

[AzzAz]

Hi guys, my RX480 mining rig is having a problem here.
2 out of 6 GPUs hang after 5 mins of mining with Claymore miner, please refer to the screenshot below.
The rig is powered by 2 750w psu.

I’ve tried reseating the risers and lowering the OC, but the result is the same.
Previosly the rig was running at a steady rate , after i relocated the rig, i have this problem.
Any advise is appreciated.

Two 750W power supplies should be enough to power your rig so we can, probably, rule out power problems (as a check use a power monitor on each supply - just to be sure).

A couple of things you could try.
Run the rig with only each of the 'faulty' cards individually to check if there is a problem with the cards - disconect every thing but the card under test.
Strip the rig down completely (leave CPU place) and re-build it, it's the hardware equivalent of "Have you tried switching it of and on again?", you never know what may have been knocked out of place during the move.

Thanks brother.
I’ve temporarily remove the 2 “faulty” cards for now and will try your method in awhile. Will give an update soon.

2 possibilities:
- @ new place 2 cards are overheating
- connection is now worse for those 2 cards/risers/slots

[Raja_MBZ]

Hi guys, my RX480 mining rig is having a problem here.
2 out of 6 GPUs hang after 5 mins of mining with Claymore miner, please refer to the screenshot below.
The rig is powered by 2 750w psu.

I’ve tried reseating the risers and lowering the OC, but the result is the same.
Previosly the rig was running at a steady rate , after i relocated the rig, i have this problem.
Any advise is appreciated.

Two 750W power supplies should be enough to power your rig so we can, probably, rule out power problems (as a check use a power monitor on each supply - just to be sure).

A couple of things you could try.
Run the rig with only each of the 'faulty' cards individually to check if there is a problem with the cards - disconect every thing but the card under test.
Strip the rig down completely (leave CPU place) and re-build it, it's the hardware equivalent of "Have you tried switching it of and on again?", you never know what may have been knocked out of place during the move.

Thanks brother.
I’ve temporarily remove the 2 “faulty” cards for now and will try your method in awhile. Will give an update soon.

Are you powering up both the cards from same PSU?

[dhmctrader]

I’ve tried reseating the risers and lowering the OC, but the result is the same.

How aggressive is your UV? I recently had a card that had been running for a good while all of a sudden need a +10 mV increase to both to keep from hanging after a while. I was pretty aggressive with the undervolting. This was on a RX480.

[deadsix]

When 12.0?

When Moon???

[Call_Me_Bambi]

Hi guys, my RX480 mining rig is having a problem here.
2 out of 6 GPUs hang after 5 mins of mining with Claymore miner, please refer to the screenshot below.
The rig is powered by 2 750w psu.

I’ve tried reseating the risers and lowering the OC, but the result is the same.
Previosly the rig was running at a steady rate , after i relocated the rig, i have this problem.
Any advise is appreciated.

Two 750W power supplies should be enough to power your rig so we can, probably, rule out power problems (as a check use a power monitor on each supply - just to be sure).

A couple of things you could try.
Run the rig with only each of the 'faulty' cards individually to check if there is a problem with the cards - disconect every thing but the card under test.
Strip the rig down completely (leave CPU place) and re-build it, it's the hardware equivalent of "Have you tried switching it of and on again?", you never know what may have been knocked out of place during the move.

Thanks brother.
I’ve temporarily remove the 2 “faulty” cards for now and will try your method in awhile. Will give an update soon.

2 possibilities:
- @ new place 2 cards are overheating
- connection is now worse for those 2 cards/risers/slots

Yes, overheating was one of the things I thought of, but screenshot looks good. The screenshot shows the rig running for only 2 minutes with temps looking OK. Would be a good idea for OP to check temp.

[AzzAz]

Hi guys, my RX480 mining rig is having a problem here.
2 out of 6 GPUs hang after 5 mins of mining with Claymore miner, please refer to the screenshot below.
The rig is powered by 2 750w psu.

I’ve tried reseating the risers and lowering the OC, but the result is the same.
Previosly the rig was running at a steady rate , after i relocated the rig, i have this problem.
Any advise is appreciated.

Two 750W power supplies should be enough to power your rig so we can, probably, rule out power problems (as a check use a power monitor on each supply - just to be sure).

A couple of things you could try.
Run the rig with only each of the 'faulty' cards individually to check if there is a problem with the cards - disconect every thing but the card under test.
Strip the rig down completely (leave CPU place) and re-build it, it's the hardware equivalent of "Have you tried switching it of and on again?", you never know what may have been knocked out of place during the move.

Thanks brother.
I’ve temporarily remove the 2 “faulty” cards for now and will try your method in awhile. Will give an update soon.

2 possibilities:
- @ new place 2 cards are overheating
- connection is now worse for those 2 cards/risers/slots

Yes, overheating was one of the things I thought of, but screenshot looks good. The screenshot shows the rig running for only 2 minutes with temps looking OK. Would be a good idea for OP to check temp.

2 minutes means nothing. Rig was working before.  Need 2 days to properly test temps, and even that is not enough as outer temp may vary much.
I just place some temp-sensitive rigs @ colder/better vented places in order to provide them to work long and even that is not enough if outer temperature rise ... Some cards just cut when over 65 celsius. Some work days @ 80s. Some mobos can't stand heat. Some PSUs too. Just 2 degrees is a BIG difference.   

[realcryptomines]

When 12.0?

When Moon???

When ProgPOW implementation?? I know Claymore has been M.I.A. for a while now but one can hope......

[antanaskkk]

11.9 is the last version, no new versions are planned.