Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Spektre99]

I have a question regarding the voltage options in a mixed rig.

I have a rig with nvidia and amd cards.

"-cvddc   set target GPU core voltage, multiplied by 1000. For example, "-cvddc 1050" means 1.05V. You can also specify values for every card, for example "-cvddc 900,950,1000,970". Supports latest AMD 4xx cards only in Windows.
   Note: for NVIDIA cards this option is not supported.

-mvddc   set target GPU memory voltage, multiplied by 1000. For example, "-mvddc 1050" means 1.05V. You can also specify values for every card, for example "-mvddc 900,950,1000,970". Supports latest AMD 4xx cards only in Windows.
   Note: for NVIDIA cards this option is not supported."

So, I understand I cannot use -cvddc and -mvddc for voltage control on the nvidia cards, but is there a way to use them on my AMD cards without running 2 instances of the miner?  (I use MSI Afterburner to control the power on the Nvidia cards)

Thanks in advance

[1713884998]

1713884998

[1713884998]

1713884998

[1713884998]

1713884998

[1713884998]

1713884998

[FlowLive]

Can this miner run on 2GB of system memory?
I had 3 gb ddr2, but one ram stick stopped working so I'm left with only 2 gb of system memory.
I tried to start miner and I get message: ethdcrminer64.exe has stopped working
I didn't have any problems so far with 3 gb of RAM.

Miner should run just fine on 2 GB of RAM. "Virtual memory" could be the issue here. It should be no less than 1.5x and no more than 3x the amount of system memory (RAM).

Just what the heck are you talking about? Virtual memory (pagefile) can be anything you want, there are no min or max, in fact the more cards you have the more Virtual ram you need, I have plenty or rigs running 50GB pagefiles.

You are confusing what Windows automatically sets with your 1.5x...

Please don't spread misinformation.

[Raja_MBZ]

Can this miner run on 2GB of system memory?
I had 3 gb ddr2, but one ram stick stopped working so I'm left with only 2 gb of system memory.
I tried to start miner and I get message: ethdcrminer64.exe has stopped working
I didn't have any problems so far with 3 gb of RAM.

Miner should run just fine on 2 GB of RAM. "Virtual memory" could be the issue here. It should be no less than 1.5x and no more than 3x the amount of system memory (RAM).

Just what the heck are you talking about? Virtual memory (pagefile) can be anything you want, there are no min or max, in fact the more cards you have the more Virtual ram you need, I have plenty or rigs running 50GB pagefiles.

You are confusing what Windows automatically sets with your 1.5x...

Please don't spread misinformation.

I remember I fixed that very same issue after I removed some RAM from my miner by decreasing the virtual memory. With 2 GB RAM, there should be a maximum of 6 GB virtual memory set according to Microsoft. In my opinion, up-to 8 GB virtual RAM should be fine as well for 2 GB RAM systems.

I'm pretty sure you've 4-8 GB RAM installed in your systems where you've set that much virtual memory.

EDIT: Here's what I'm talking about: https://www.ultraedit.com/support/tutorials-power-tips/ultracompare/increase-virtual-memory.html ... Read the last paragraph.

[jeremyismer]

Can this miner run on 2GB of system memory?
I had 3 gb ddr2, but one ram stick stopped working so I'm left with only 2 gb of system memory.
I tried to start miner and I get message: ethdcrminer64.exe has stopped working
I didn't have any problems so far with 3 gb of RAM.

I had a problem when I started with only 2gb of RAM, but when I did 4gb it ran. So I believe it won't work on 2gb of RAM. I am pretty sure I had the virtual memory set correctly and that it was just a physical ram problem.

[MikeGR7]

Can this miner run on 2GB of system memory?
I had 3 gb ddr2, but one ram stick stopped working so I'm left with only 2 gb of system memory.
I tried to start miner and I get message: ethdcrminer64.exe has stopped working
I didn't have any problems so far with 3 gb of RAM.

Miner should run just fine on 2 GB of RAM. "Virtual memory" could be the issue here. It should be no less than 1.5x and no more than 3x the amount of system memory (RAM).

Just what the heck are you talking about? Virtual memory (pagefile) can be anything you want, there are no min or max, in fact the more cards you have the more Virtual ram you need, I have plenty or rigs running 50GB pagefiles.

You are confusing what Windows automatically sets with your 1.5x...

Please don't spread misinformation.

I remember I fixed that very same issue after I removed some RAM from my miner by decreasing the virtual memory. With 2 GB RAM, there should be a maximum of 6 GB virtual memory set according to Microsoft. In my opinion, up-to 8 GB virtual RAM should be fine as well for 2 GB RAM systems.

I'm pretty sure you've 4-8 GB RAM installed in your systems where you've set that much virtual memory.

EDIT: Here's what I'm talking about: https://www.ultraedit.com/support/tutorials-power-tips/ultracompare/increase-virtual-memory.html ... Read the last paragraph.

Ok, it is clear you are trying to help but please let this one go.

That source you posted is obviously outdated and clearly rookie targeted.

Mining is not the typical usage senario for desktop PC so please skip any article, guide whatever that is not specifically made for Cryptomining.

Anything below 20GB virtual memory will propably crash the miner. Even the OP states that VM should be 16GB or more.

I recommend he sets it to 25GB and try again.

[Raja_MBZ]

Ok, it is clear you are trying to help but please let this one go.

That source you posted is obviously outdated and clearly rookie targeted.

Mining is not the typical usage senario for desktop PC so please skip any article, guide whatever that is not specifically made for Cryptomining.

Anything below 20GB virtual memory will propably crash the miner. Even the OP states that VM should be 16GB or more.

I recommend he sets it to 25GB and try again.

Actually, when I decreased my RAM from 8 GB to 3 GB, I was facing some sort of application crash during mining (somewhat similar to @damba_'s), but decreasing the virtual RAM to 15000 MB worked out for me that time (it was way over this number before I decreased it). It's still running good at 15000 MB (just re-checked this number) with 3 GB RAM.

From what I can conclude, if you've over 4 GB RAM, you can set insanely huge values of virtual RAM like 40 GB or 50 GB (probably as big as your available secondary memory size), but if you've around 2-3 GB RAM, you've to set it lower and can't be that crazy.

[BudgieSmuggler]

TFW you get busted using claymore on company computers to mine a crappy alt coin... They can't fire me though because I quit

[damba_]

Ok, it is clear you are trying to help but please let this one go.

That source you posted is obviously outdated and clearly rookie targeted.

Mining is not the typical usage senario for desktop PC so please skip any article, guide whatever that is not specifically made for Cryptomining.

Anything below 20GB virtual memory will propably crash the miner. Even the OP states that VM should be 16GB or more.

I recommend he sets it to 25GB and try again.

Actually, when I decreased my RAM from 8 GB to 3 GB, I was facing some sort of application crash during mining (somewhat similar to @damba_'s), but decreasing the virtual RAM to 15000 MB worked out for me that time (it was way over this number before I decreased it). It's still running good at 15000 MB (just re-checked this number) with 3 GB RAM.

From what I can conclude, if you've over 4 GB RAM, you can set insanely huge values of virtual RAM like 40 GB or 50 GB (probably as big as your available secondary memory size), but if you've around 2-3 GB RAM, you've to set it lower and can't be that crazy.

I tried lowering and increasing Virtual memory but it didn't help.
I borrowed 1GB of RAM from a friend and now the miner runs ok.
Total memory consumption in Win 10 while mining is ~1,8GB so that's the reason why 2GB of RAM is not enough.

[Chipinski]

Please suggest correction of my RIG    Claymore miner error " Not initializing "   Keeps trying for 5 minutes.  Disconnects.  and tries again.  etc.

My RIg.   Windows 10 fresh install fully updated.  16gb Ram.  Asus B250 Mining expert MOBO, Intel I3, 120GB Sd card.  4- RX-570 - 8gb AND 4- RX 580 - 8gb.

Did a AMD delete of all drivers and a fresh install. 

On Boot up cards are recognized, AMD latest drivers are installed, all cards are set to compute.  AMD and system shows no errors.

The system was working fine.  I was getting 220 MHz on average. Can not exactly pinpoint when it stopped. 

Been reading the forums and can not see anyone with the same issue.  I do not get any error codes other than " Miner fails initialing Restart miner "

Any help would be appreciated.

Thanks

Chip

[AzzAz]

Please suggest correction of my RIG    Claymore miner error " Not initializing "   Keeps trying for 5 minutes.  Disconnects.  and tries again.  etc.

My RIg.   Windows 10 fresh install fully updated.  16gb Ram.  Asus B250 Mining expert MOBO, Intel I3, 120GB Sd card.  4- RX-570 - 8gb AND 4- RX 580 - 8gb.

Did a AMD delete of all drivers and a fresh install. 

On Boot up cards are recognized, AMD latest drivers are installed, all cards are set to compute.  AMD and system shows no errors.

The system was working fine.  I was getting 220 MHz on average. Can not exactly pinpoint when it stopped. 

Been reading the forums and can not see anyone with the same issue.  I do not get any error codes other than " Miner fails initialing Restart miner "

Any help would be appreciated.

Thanks

Chip

1803. rollback.  Lot of posts here you can find.

[BSAlex]

Can this miner run on 2GB of system memory?
I had 3 gb ddr2, but one ram stick stopped working so I'm left with only 2 gb of system memory.
I tried to start miner and I get message: ethdcrminer64.exe has stopped working
I didn't have any problems so far with 3 gb of RAM.

I am running CDE v.11.8 with 2Gb Ram since the version is available, no problems. Just use Linux :-) and forget all this windows crap about pagefile, disabling updates and new drivers with performance issues. No-brainer for Linux noob - HiveOS with Web managment console and free for home mining up to 3 rigs.

[damba_]

Can this miner run on 2GB of system memory?
I had 3 gb ddr2, but one ram stick stopped working so I'm left with only 2 gb of system memory.
I tried to start miner and I get message: ethdcrminer64.exe has stopped working
I didn't have any problems so far with 3 gb of RAM.

I am running CDE v.11.8 with 2Gb Ram since the version is available, no problems. Just use Linux :-) and forget all this windows crap about pagefile, disabling updates and new drivers with performance issues. No-brainer for Linux noob - HiveOS with Web managment console and free for home mining up to 3 rigs.

I was thinking of using HiveOS but since I got replacement RAM very fast, I didn't.
But I am planning to switch to HiveOS, Win10 is starting to get on my nerves.

[qwertyqwerty]

Hi guys,
Can i mine solo ETC with this miner right?
If yes, what OC you recommend for RX580 8G cards? Please help.

[Tomason]

Please, no one of you is mining ethereum with nvidia through Ethermine in win 10?.
I need someone to help me, none of the versions of Claymore work.

[LucianoBM]

Please, no one of you is mining ethereum with nvidia through Ethermine in win 10?.
I need someone to help me, none of the versions of Claymore work.

I have 1 nvidia running on a rig with AMDs
Claymore 11.7 / Ethermine / Win 10

[Tomason]

Please, no one of you is mining ethereum with nvidia through Ethermine in win 10?.
I need someone to help me, none of the versions of Claymore work.

I have 1 nvidia running on a rig with AMDs
Claymore 11.7 / Ethermine / Win 10

I have not tried yet with this version, I'll make an attempt. I find it strange that I have done everything and nothing.
Thanks bro.

[Tomason]

Please, no one of you is mining ethereum with nvidia through Ethermine in win 10?.
I need someone to help me, none of the versions of Claymore work.

I have 1 nvidia running on a rig with AMDs
Claymore 11.7 / Ethermine / Win 10

I have not tried yet with this version, I'll make an attempt. I find it strange that I have done everything and nothing.
Thanks bro.

I've tried again with v11.8 in my nvidia rig with win10 and
these are the data in the file log.txt:



19:13:11:617   1548   Check and remove old log files...
19:13:11:618   1548   args: -epool us1-etc.ethermine.org:4444 -ewal 0xfF4a2178527481420310Cd069335b472E3FE1156.MN1 -epsw x -mode 1 -platform 2 -ftime 10
19:13:11:620   1548   
19:13:11:622   1548   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
19:13:11:623   1548   º                Claymore's Dual GPU Miner - v11.8               º
19:13:11:624   1548   º              ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK             º
19:13:11:625   1548   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
19:13:11:627   1548   
19:13:11:628   1548   b591
19:13:11:889   1548   ETH: 1 pool is specified
19:13:11:890   1548   Main Ethereum pool is us1-etc.ethermine.org:4444
19:13:12:989   1548   CUDA initializing...

19:13:12:990   1548   NVIDIA Cards available: 10
19:13:12:992   1548   CUDA Driver Version/Runtime Version: 9.1/8.0
19:13:13:311   1548   GPU #0: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1  (pci bus 1:0:0)
19:13:13:320   1548   GPU #1: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1  (pci bus 3:0:0)
19:13:13:330   1548   GPU #2: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1  (pci bus 4:0:0)
19:13:13:340   1548   GPU #3: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1  (pci bus 5:0:0)
19:13:13:352   1548   GPU #4: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1  (pci bus 9:0:0)
19:13:13:367   1548   GPU #5: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1  (pci bus 10:0:0)
19:13:13:382   1548   GPU #6: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1  (pci bus 12:0:0)
19:13:13:393   1548   GPU #7: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1  (pci bus 13:0:0)
19:13:13:406   1548   GPU #8: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1  (pci bus 14:0:0)
19:13:13:420   1548   GPU #9: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1  (pci bus 15:0:0)
19:13:13:421   1548   Total cards: 10
19:13:17:027   1548   
You can use "+" and "-" keys to achieve best ETH speed, see "FINE TUNING" section in Readme for details.

19:13:18:034   1548   NVML version: 9.390.77
19:13:18:042   1548   NVML API: failed to get device handle 1, error 999.
19:13:18:100   1548   NVML API: failed to get device handle 1, error 999.
19:13:18:103   1548   NVML API: failed to get device handle 1, error 999.
19:13:18:105   1548   NVML API: failed to get device handle 1, error 999.
19:13:18:107   1548   NVML API: failed to get device handle 1, error 999.
19:13:18:109   1548   NVML API: failed to get device handle 1, error 999.
19:13:18:112   1548   NVML API: failed to get device handle 1, error 999.
19:13:18:114   1548   NVML API: failed to get device handle 1, error 999.
19:13:18:117   1548   NVML API: failed to get device handle 1, error 999.
19:13:18:119   1548   NVML API: failed to get device handle 1, error 999.
19:13:20:730   1548   SSL: Imported 41 certificates from local storage
19:13:20:740   374   ETH: Stratum - connecting to 'us1-etc.ethermine.org' <54.177.207.188> port 4444 (unsecure)
19:13:20:832   1548   ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)

19:13:20:833   1548   ETH: eth-proxy stratum mode
19:13:20:835   1548   Watchdog enabled
19:13:20:837   1548   Remote management (READ-ONLY MODE) is enabled on port 3333
19:13:20:838   1548   

19:13:20:868   374   sent: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["0xfF4a2178527481420310Cd069335b472E3FE1156.MN1", "x"], "id": 2, "method": "eth_submitLogin"}

19:13:20:870   374   ETH: Stratum - Connected (us1-etc.ethermine.org:4444) (unsecure)
19:13:20:997   374   buf: {"id":2,"jsonrpc":"2.0","result":true}

19:13:20:998   374   ETH: Authorized
19:13:20:999   374   sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

19:13:21:116   374   buf: {"id":3,"jsonrpc":"2.0","result":["0x7f2def7afd3145f63f0be5165d6e79eae7cbf3f5794757a1f3f85b57ec69ee76","0x8308d376eeb469b7ff84bd59c51988d9618b208dc3b951d1dc1918fa08306723","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x5be6c5"]}

19:13:21:129   2188   Setting DAG epoch #200...
19:13:23:800   116c   Setting DAG epoch #200 for GPU0
19:13:23:801   165c   Setting DAG epoch #200 for GPU3
19:13:23:804   96c   Setting DAG epoch #200 for GPU5
19:13:23:800   2c0   Setting DAG epoch #200 for GPU1
19:13:23:807   116c   Create GPU buffer for GPU0
19:13:23:802   1710   Setting DAG epoch #200 for GPU9
19:13:23:804   1540   Setting DAG epoch #200 for GPU7
19:13:23:799   2188   Setting DAG epoch #200 for GPU4
19:13:23:804   2308   Setting DAG epoch #200 for GPU8
19:13:23:806   1610   Setting DAG epoch #200 for GPU2
19:13:23:810   165c   Create GPU buffer for GPU3
19:13:23:827   1710   Create GPU buffer for GPU9
19:13:23:829   2188   Create GPU buffer for GPU4
19:13:23:816   96c   Create GPU buffer for GPU5
19:13:23:821   2c0   Create GPU buffer for GPU1
19:13:23:825   1a28   Setting DAG epoch #200 for GPU6
19:13:23:834   1610   Create GPU buffer for GPU2
19:13:23:844   1a28   Create GPU buffer for GPU6
19:13:23:846   2308   Create GPU buffer for GPU8
19:13:23:847   1540   Create GPU buffer for GPU7
19:13:24:506   2188   CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

19:13:24:528   2c0   CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

19:13:24:563   2308   CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

19:13:24:681   1610   CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

19:13:27:509   2188   Set global fail flag, failed GPU4
19:13:27:510   1080   Setting DAG epoch #200 for GPU4
19:13:27:511   2188   GPU 4 failed
19:13:27:513   1080   GPU 4, CUDA error 11 - cannot write buffer for DAG

19:13:27:531   2c0   Set global fail flag, failed GPU1
19:13:27:533   2c0   GPU 1 failed
19:13:27:534   2080   Setting DAG epoch #200 for GPU1
19:13:27:535   2080   GPU 1, CUDA error 11 - cannot write buffer for DAG

19:13:27:568   2308   Set global fail flag, failed GPU8
19:13:27:571   2308   GPU 8 failed
19:13:27:572   118c   Setting DAG epoch #200 for GPU8
19:13:27:574   118c   GPU 8, CUDA error 11 - cannot write buffer for DAG

19:13:27:684   1610   Set global fail flag, failed GPU2
19:13:27:685   fb0   Setting DAG epoch #200 for GPU2
19:13:27:687   1610   GPU 2 failed
19:13:27:688   fb0   GPU 2, CUDA error 11 - cannot write buffer for DAG

19:13:30:515   1080   Set global fail flag, failed GPU4
19:13:30:516   1080   GPU 4 failed
19:13:30:537   2080   Set global fail flag, failed GPU1
19:13:30:538   2080   GPU 1 failed
19:13:30:576   118c   Set global fail flag, failed GPU8
19:13:30:577   118c   GPU 8 failed
19:13:30:691   fb0   Set global fail flag, failed GPU2
19:13:30:692   fb0   GPU 2 failed
19:13:31:131   374   ETH: checking pool connection...
19:13:31:132   374   sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

19:13:31:249   374   buf: {"id":3,"jsonrpc":"2.0","result":["0x7f2def7afd3145f63f0be5165d6e79eae7cbf3f5794757a1f3f85b57ec69ee76","0x8308d376eeb469b7ff84bd59c51988d9618b208dc3b951d1dc1918fa08306723","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x5be6c5"]}

19:13:31:841   116c   GPU0 DAG creation time - 7842 ms
19:13:31:842   116c   Setting DAG epoch #200 for GPU0 done
19:13:32:183   1a28   GPU6 DAG creation time - 7860 ms
19:13:32:184   1a28   Setting DAG epoch #200 for GPU6 done
19:13:32:187   96c   GPU5 DAG creation time - 7837 ms
19:13:32:188   96c   Setting DAG epoch #200 for GPU5 done
19:13:32:238   165c   GPU3 DAG creation time - 7854 ms
19:13:32:240   165c   Setting DAG epoch #200 for GPU3 done
19:13:32:368   1710   GPU9 DAG creation time - 7898 ms
19:13:32:370   1710   Setting DAG epoch #200 for GPU9 done
19:13:32:468   1540   GPU7 DAG creation time - 7854 ms
19:13:32:470   1540   Setting DAG epoch #200 for GPU7 done
19:13:41:131   374   sent: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x98b37c8", "0x00000000000000000000000000000000000000000000000000000000fca64bb9"]}

19:13:41:146   374   ETH: checking pool connection...
19:13:41:147   374   sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

19:13:41:250   374   buf: {"id":6,"jsonrpc":"2.0","result":true}

19:13:41:364   374   buf: {"id":3,"jsonrpc":"2.0","result":["0x7f2def7afd3145f63f0be5165d6e79eae7cbf3f5794757a1f3f85b57ec69ee76","0x8308d376eeb469b7ff84bd59c51988d9618b208dc3b951d1dc1918fa08306723","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x5be6c5"]}

19:13:41:940   7a0   GPU0 t=53C fan=75%, GPU1 t=46C fan=75%, GPU2 t=47C fan=75%, GPU3 t=62C fan=75%, GPU4 t=46C fan=75%, GPU5 t=58C fan=75%, GPU6 t=55C fan=75%, GPU7 t=56C fan=75%, GPU8 t=47C fan=75%, GPU9 t=55C fan=75%
19:13:42:032   1f44   em hbt: 0, fm hbt: 94,
19:13:42:033   1f44   watchdog - thread 0 (gpu0), hb time 172
19:13:42:033   1f44   watchdog - thread 1 (gpu0), hb time 16
19:13:42:034   1f44   watchdog - thread 2 (gpu1), hb time 9563
19:13:42:035   1f44   watchdog - thread 3 (gpu1), hb time 9563
19:13:42:036   1f44   watchdog - thread 4 (gpu2), hb time 9578
19:13:42:037   1f44   watchdog - thread 5 (gpu2), hb time 9578
19:13:42:038   1f44   watchdog - thread 6 (gpu3), hb time 78
19:13:42:039   1f44   watchdog - thread 7 (gpu3), hb time 218
19:13:42:040   1f44   watchdog - thread 8 (gpu4), hb time 9578
19:13:42:041   1f44   watchdog - thread 9 (gpu4), hb time 9578
19:13:42:042   1f44   watchdog - thread 10 (gpu5), hb time 265
19:13:42:043   1f44   watchdog - thread 11 (gpu5), hb time 125
19:13:42:043   1f44   watchdog - thread 12 (gpu6), hb time 265
19:13:42:044   1f44   watchdog - thread 13 (gpu6), hb time 125
19:13:42:045   1f44   watchdog - thread 14 (gpu7), hb time 140
19:13:42:046   1f44   watchdog - thread 15 (gpu7), hb time 281
19:13:42:047   1f44   watchdog - thread 16 (gpu8), hb time 9578
19:13:42:048   1f44   watchdog - thread 17 (gpu8), hb time 9578
19:13:42:049   1f44   watchdog - thread 18 (gpu9), hb time 234
19:13:42:050   1f44   watchdog - thread 19 (gpu9), hb time 93
19:13:42:051   1f44   WATCHDOG: GPU error, you need to restart miner
19:13:42:167   408   Quit, please wait...
19:13:43:609   1f44   Restarting OK, exit...


This is my bat file:

EthDcrMiner64.exe -epool us1-etc.ethermine.org:4444 -ewal 0xfF4a2178527481420310Cd069335b472E3FE1156.MN1 -epsw x -mode 1 -platform 2 -ftime 10

Any help please

[jeremyismer]

Please, no one of you is mining ethereum with nvidia through Ethermine in win 10?.
I need someone to help me, none of the versions of Claymore work.

I have 1 nvidia running on a rig with AMDs
Claymore 11.7 / Ethermine / Win 10

I have not tried yet with this version, I'll make an attempt. I find it strange that I have done everything and nothing.
Thanks bro.

I've tried again with v11.8 in my nvidia rig with win10 and
these are the data in the file log.txt:

Any help please

How much virtual memory do you have? What version of Win10 do you have?

[Tomason]

Please, no one of you is mining ethereum with nvidia through Ethermine in win 10?.
I need someone to help me, none of the versions of Claymore work.

I have 1 nvidia running on a rig with AMDs
Claymore 11.7 / Ethermine / Win 10

I have not tried yet with this version, I'll make an attempt. I find it strange that I have done everything and nothing.
Thanks bro.

I've tried again with v11.8 in my nvidia rig with win10 and
these are the data in the file log.txt:

Any help please

How much virtual memory do you have? What version of Win10 do you have?

Win 10 pro
version : 1709
OS Build: 16299.431
Virtual Memory: 16.000

[M4x1221]

Since I updated to windows 1803, when my rigs restart, it needs to be connected to a monitor otherwise claymore don't start. Anyone have the same issue ? As soon as a monitor is plugged, rigs restart. Here is what I got in log.


20:19:42:833   1c28   Main Ethereum pool is us1.ethermine.org:5555
20:19:42:848   1c28   DCR: 0 pool is specified
20:19:43:527   1c28   OpenCL platform: Intel(R) OpenCL
20:19:43:527   1c28   OpenCL platform: AMD Accelerated Parallel Processing
20:19:43:543   1c28   OpenCL initializing...

20:19:43:543   1c28   AMD Cards available: 1
20:19:43:543   1c28   GPU #0: Ellesmere (Radeon RX 570 Series), 8192 MB available, 32 compute units (pci bus 1:0:0)
20:19:43:558   1c28   GPU #0 recognized as Radeon RX 470/570
20:19:43:558   1c28   POOL/SOLO version
20:19:43:558   1c28   Platform: Windows
20:19:43:839   1c28   start building OpenCL program for GPU 0...
20:20:15:721   1c50   
20:20:48:540   1c50   
20:21:21:387   1c50   
20:21:54:236   1c50   
20:22:27:096   1c50   
20:22:59:951   1c50   
20:23:32:806   1c50   
20:24:05:654   1c50   
20:24:38:511   1c50   
20:25:11:175   1c50   
20:25:11:175   1c50   Miner cannot initialize for 5 minutes, need to restart miner!
20:25:11:175   1c50   Rebooting
20:25:11:378   9fc   GPU 0 temp = 33, old fan speed = 0, new fan speed = 56




Before windows 1803, all the miners restarted like a charm...

Thank you