Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[ildotoress]

@Claymore are you going to release a new version for Constantinople or that is not needed?

[nn47nn]

https://github.com/ethereum-mining/ethminer  work perfect now, no fee.
You gave some of your coins to claymore and got a headache for several months.
Think about switching to open source

[gsi5555]

All mine 4GB AMD rigs stop working last night. 
not enough GPU memory to place DAG, you cannot mine this coin with this GPU
12.0 miner, -Eres 0 dont help, more that 32 GB of virtual mem dont help...
Win 10 1803

[UselessGuru]

Even with 12.0 I am still getting lots of bad keccak shares (with AMD and NVIDIA hardware):

Code:

KC: 01/01/19-14:03:05 - New job from keccak.mine.ahashpool.com:5133
 KC: 01/01/19-14:03:16 - SHARE FOUND - (GPU 0)
 KC: Share accepted (172 ms)!
 KC: 01/01/19-14:03:21 - SHARE FOUND - (GPU 0)
 KC: Share rejected (156 ms)!
 KC: 01/01/19-14:03:23 - SHARE FOUND - (GPU 0)
 KC: 01/01/19-14:03:23 - SHARE FOUND - (GPU 0)
 KC: Share rejected (157 ms)!
 KC: Share rejected (329 ms)!
ETH: 01/01/19-14:03:26 - New job from daggerhashimoto.eu.nicehash.com:3353
ETH - Total Speed: 5.800 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:01
ETH: GPU0 5.800 Mh/s
 KC - Total Speed: 231.981 Mh/s, Total Shares: 9, Rejected: 6
 KC: GPU0 231.981 Mh/s
ETH: 01/01/19-14:03:27 - New job from daggerhashimoto.eu.nicehash.com:3353
ETH - Total Speed: 5.800 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:01
ETH: GPU0 5.800 Mh/s
 KC - Total Speed: 231.981 Mh/s, Total Shares: 9, Rejected: 6
 KC: GPU0 231.981 Mh/s
ETH: 01/01/19-14:03:28 - New job from daggerhashimoto.eu.nicehash.com:3353
ETH - Total Speed: 5.800 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:01
ETH: GPU0 5.800 Mh/s
 KC - Total Speed: 231.981 Mh/s, Total Shares: 9, Rejected: 6
 KC: GPU0 231.981 Mh/s
GPU0 t=58C fan=27%
 KC: 01/01/19-14:03:31 - SHARE FOUND - (GPU 0)
 KC: Share rejected (172 ms)!
 KC: Too many rejects from pool, disconnect...
 KC: - connection in 20 sec...

[dorek_k]

All mine 4GB AMD rigs stop working last night.  
not enough GPU memory to place DAG, you cannot mine this coin with this GPU
12.0 miner, -Eres 0 dont help, more that 32 GB of virtual mem dont help...
Win 10 1803

Faced with a similar problem, a farm of 6 RX 580 nitro +
She stopped working on New Year's Eve at 3 o'clock in Moscow

[king_pin]

All mine 4GB AMD rigs stop working last night.  
not enough GPU memory to place DAG, you cannot mine this coin with this GPU
12.0 miner, -Eres 0 dont help, more that 32 GB of virtual mem dont help...
Win 10 1803

Faced with a similar problem, a farm of 6 RX 580 nitro +
She stopped working on New Year's Eve at 3 o'clock in Moscow

Same problem here, I reported it a few weeks ago, v12 fixed it temporary.
But for me it is not all my 4g rigs, most are working, and I cant find any difference between the working and not working once.
They are all win10 beta blockhain drivers, only like 20% are givin'g dag epoch error not enough memory on GPU.
The working once I have benched to dag #299 no problem... wtf lol

[big_daddy]

You having issues with 4GB rigs on DAG file cannot be uploaded
Install any adrenaline 18.x.x driver, switch the cards to compute and use the last clay 12.0

And happy new year mining on

[trendafil]

Happy new year
Still not work any solutions or idea for another miner

[urosx]

Mine RX 570/580 4GB rigs stop working this morning (cannot allocate big buffer for DAG).
Runing Claymore's Miner v12 on Windows 10 v1709
Driver Crimson ReLive Edition Beta for Blockchain 

Other mining software works fine for me.

[big_daddy]

Mine RX 570/580 4GB rigs stop working this morning (cannot allocate big buffer for DAG).
Runing Claymore's Miner v12 on Windows 10 v1709
Driver Crimson ReLive Edition Beta for Blockchain 

Other mining software works fine for me.

Read two posts up ^

Move to any 18.x.x driver version, test on your config the best driver that will give best hash performance
Compute mode on, using compute patcher

Hint: install the driver only, without the amd settings cause the wattman will give you headache

[gsi5555]

where can I download compute patcher

[big_daddy]

where can I download compute patcher

Here https://bitcointalk.org/index.php?topic=2815803.0

[user0071]

I'm still having problems with a previously working rig now giving a black screen/stop mining, but rig is still powered on (soft crash). Could this be a SSD error? It was running 5 GPUs OC'd, undervolted. running at 750w on a 1K platinum PSU. Even at stock clocks, the rig still soft crashes. All i get is the kernal error 41, so no help. Is this a symptom of bad riser? What i'm doing now is running things OC/UV but taking a gpu completely out of the equation with each subsequent crash to find the bad riser or gpu. Thing is, hwinfo reports 0 errors on anything.

Help get my rig back to stable!

[AirBank]

Mine RX 570/580 4GB rigs stop working this morning (cannot allocate big buffer for DAG).
Runing Claymore's Miner v12 on Windows 10 v1709
Driver Crimson ReLive Edition Beta for Blockchain 

Other mining software works fine for me.

Read two posts up ^

Move to any 18.x.x driver version, test on your config the best driver that will give best hash performance
Compute mode on, using compute patcher

Hint: install the driver only, without the amd settings cause the wattman will give you headache

Hi there
i got same DAG issue here also,
 v12 fixed it temporary
Only 1 of my 4g rigs is affected,   others 3 are still fine on claymore 11.9
i follow the previous comment
So on that rig, i install Adrenaline 18.8.2
i patch it (because mod bios)
reboot
i use the patch to switch to compute mode using the tool (https://bitcointalk.org/index.php?topic=2815803.0)
reboot
testing Claymore 12.0 , now it's mining but..... my card are running at 14 MHS instead of 28 mhs,    same thing if i enable or disable my OC in msi afterburner
Any idea ?
Thank you ! happy new year

[tkachev.go]

Mine RX 570/580 4GB rigs stop working this morning (cannot allocate big buffer for DAG).
Runing Claymore's Miner v12 on Windows 10 v1709
Driver Crimson ReLive Edition Beta for Blockchain 

Other mining software works fine for me.

Read two posts up ^

Move to any 18.x.x driver version, test on your config the best driver that will give best hash performance
Compute mode on, using compute patcher

Hint: install the driver only, without the amd settings cause the wattman will give you headache

Hi there
i got same DAG issue here also,
 v12 fixed it temporary
Only 1 of my 4g rigs is affected,   others 3 are still fine on claymore 11.9
i follow the previous comment
So on that rig, i install Adrenaline 18.8.2
i patch it (because mod bios)
reboot
i use the patch to switch to compute mode using the tool (https://bitcointalk.org/index.php?topic=2815803.0)
reboot
testing Claymore 12.0 , now it's mining but..... my card are running at 14 MHS instead of 28 mhs,    same thing if i enable or disable my OC in msi afterburner
Any idea ?
Thank you ! happy new year

Claymore wrote:

Because Windows 10 reserves a lot of GPU memory. Also this issue can be if not enough physical RAM is installed, Windows requires some physical RAM when GPU RAM is used, virtual memory helps but some additional physical RAM is required anyway.

They working because they have a little more physical RAM.
I had a reduced hashrate with drivers v.18. *

Now Windows 10 x64 build 1803/ 4GB RAM /Rx570 4GB /drivers blockchain beta / Claymore v12 - working well.

[AirBank]

Mine RX 570/580 4GB rigs stop working this morning (cannot allocate big buffer for DAG).
Runing Claymore's Miner v12 on Windows 10 v1709
Driver Crimson ReLive Edition Beta for Blockchain 

Other mining software works fine for me.

Read two posts up ^

Move to any 18.x.x driver version, test on your config the best driver that will give best hash performance
Compute mode on, using compute patcher

Hint: install the driver only, without the amd settings cause the wattman will give you headache

Hi there
i got same DAG issue here also,
 v12 fixed it temporary
Only 1 of my 4g rigs is affected,   others 3 are still fine on claymore 11.9
i follow the previous comment
So on that rig, i install Adrenaline 18.8.2
i patch it (because mod bios)
reboot
i use the patch to switch to compute mode using the tool (https://bitcointalk.org/index.php?topic=2815803.0)
reboot
testing Claymore 12.0 , now it's mining but..... my card are running at 14 MHS instead of 28 mhs,    same thing if i enable or disable my OC in msi afterburner
Any idea ?
Thank you ! happy new year

Ok my issue is now resolve (for now) using this Adrenaline driver, following all the same steps after.
https://www.amd.com/en/support/kb/release-notes/rn-rad-win-18-9-3
ps i have 8gb ram (4rx470 4gb) and virtual mem has been increased
thanks all

[rozsada]

Hi guys!
Have a problem with a rig 6*470rx - DAG issue (not enough GPU memory).

I've updated AMD driver to 18.12.3
But now I can not patch (by atikmdag-patcher).

Can you help? Or any other idea?
Thanks

[rozsada]

Hi guys!
Have a problem with a rig 6*470rx - DAG issue (not enough GPU memory).

I've updated AMD driver to 18.12.3
But now I can not patch (by atikmdag-patcher).

Can you help? Or any other idea?
Thanks

1 - what kind of patcher should I use?
2 - is driver 18.12.3 ok?

thanks

[Lunga Chung]

Install 18.6.1 driver
Install Win 1709 (any lite edition)

Set primary display to be integrated GPU

[rozsada]

Install 18.6.1 driver
Install Win 1709 (any lite edition)

Set primary display to be integrated GPU

thanks, I'll try...