octomob
Member
Offline
Activity: 155
Merit: 12
Crypto Mining Hardware for Sale
|
|
September 04, 2017, 12:05:24 AM |
|
Anone managed to start NVOC version 19 with built-in VGA? I heared this version finally have a fix, for using on rigs built on GP106-100 GPUs
|
PM me for ASIC / GPU mining hardware private sale offers
|
|
|
rayd89
Newbie
Offline
Activity: 28
Merit: 0
|
|
September 04, 2017, 01:14:01 AM Last edit: September 04, 2017, 03:20:02 AM by rayd89 |
|
Ok - found an issue.
I've tried setting "manual fan speed" and played around with the maximus auto fan control - but some of my cards just dont want to run the fan speed i set in 1Bash.
When i was running off 1PSU with 8 cards it ran perfectly.
I just added a second PSU to my ASROCK BTC PRO board to run 13 cards and 4/ 13 of the cards wont adjust their fan speed correctly.
EDIT: With every restart its getting less and less stable - fan speeds are NOT changing on majority of cards now.
|
|
|
|
dbolivar
Member
Offline
Activity: 119
Merit: 10
|
|
September 04, 2017, 03:20:03 AM |
|
This is the scheme of my setup. Is a box 44cm wide x 32cm high and gpus are setup on two levels one on top of other. (1060 3Gb gpu) There is a raspberry pi wich allows me to reset/poweroff-on and control the inside temps using 5 sensors DS18B20. 12 fans push fresh air inside the box. They feed on an external psu. Temps with power limite 92W are 57-68ºC. By the way I had a big cpu load (5-14) when I had power limit to 72W. Once set to 92W got down to 1.5-2.2 (yes I know no good yet, but much better). I use a celeron g3900, looking forward to upgrade to I3. I post this hoping the schematic helps others like me who have their rig in remote locations. Here the code bits for temps, poweron/off and reset.
Hey man, that's a very nice DIY project you have there! And great schematics btw, thanks for sharing. I'm wondering, how much did it cost overall (Pi + fans + sensors and parts)? Did you try integrating it with nvOC's auto temp control, which uses the GPUs internal temp sensors, instead of relying on the DS18B20? I'm facing some heating issues here, as the days are becoming hotter, so I'm thinking about what to do. I don't want to leave an A/C on all day, because of energy costs, so probably will need something to suck the hot air from the GPUs to the outside during the day, and reverse direction at night, when it's colder outside. Your project really gives some ideas...
|
|
|
|
rayd89
Newbie
Offline
Activity: 28
Merit: 0
|
|
September 04, 2017, 05:05:54 AM |
|
Ok - so my rig stops applying fan % correctly once i get to more than 11 cards. once i connect the 12th and/ or 13th card to the ASROCK pro btc board - it wont apply the fan % to all the card / regulate auto temp at all. and the computer becomes almost un-usable due to how slow the UI is.
any idea whats up? running 8GB DDR4 ram 128gb SSD Celeron G3930 processor
|
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
September 04, 2017, 07:55:50 AM |
|
Install libutempter sudo apt install libutempter0
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
September 04, 2017, 08:11:20 AM Last edit: September 04, 2017, 07:48:15 PM by papampi |
|
So I make some changes for a new telegram alert system The 30 min telegram notification is good but it gets annoying over time and I had to mute it. I created a new telegram-alert to pass me alerts from IAmNotAJeep_and_Maxximus007_WATCHDOG First create a new bot as explained on OP call it Mining Alerts (or whatever you like) Make new telegram-alert file in m1 home and put these inside : telegram-alert: #!/bin/bash # Telegram Info Script # By BaliMiner et al... # for nvOC by fullzero # ref: http://bernaerts.dyndns.org/linux/75-debian/351-debian-send-telegram-notification #
source ~/1bash
CHATID=$TELEGRAM_CHATID APIKEY=$TELEGRAM_ALERT_APIKEY
SYSTEM_BOOT_TIME=$(uptime -s) GPU_COUNT=$(nvidia-smi -L | tail -n 1| cut -c 5 |awk '{ SUM += $1+1} ; { print SUM }') STARTING_MINER=$(tail -n50 /home/m1/5_restartlog | grep Starting | tail -n 1) LOST_GPU=$(tail -n50 /home/m1/5_restartlog | grep Lost| tail -n 1) REBOOT_ALERT=$(tail -n50 /home/m1/5_restartlog | grep 'reboot in' |tail -n 1) UTILIZATION_LOW_REBOOTING=$(tail -n50 /home/m1/5_restartlog | grep 'low: reviving' |tail -n 1) UTILIZATION_LOW_RESTART_3MAIN=$(tail -n50 /home/m1/5_restartlog | grep 'low: restart' |tail -n 1) LOW_UTILIZATION=$(tail -n50 /home/m1/5_restartlog | grep 'Low Utilization' |tail -n 1) FAILURES_REINIT=$(tail -n50 /home/m1/5_restartlog | grep 'Before reinit')
SYSTEM_UP_TIME=$(uptime -p) REBOOT_REQUIRED=$(/home/m1/reboot-required) GPU_UTILIZATIONS=$(tail -n 30 5_restartlog | grep 'GPU UTILIZATION' | awk '{gsub(/GPU UTILIZATION: /,"")}1' | tail -n 1)
TEMP=$(/usr/bin/nvidia-smi --query-gpu=temperature.gpu --format=csv,noheader) PD=$(/usr/bin/nvidia-smi --query-gpu=power.draw --format=csv,noheader) FAN=$(/usr/bin/nvidia-smi --query-gpu=fan.speed --format=csv,noheader) TEMP_FAN_POWER=$(tail -n 30 6_autotemplog | grep GPU | awk '{gsub(/:/,": ")}1' |tail -n $GPU_COUNT)
LF=$'\n'
MSG=" Worker: $WORKERNAME Boot Time: $SYSTEM_BOOT_TIME GPU Count: $GPU_COUNT GPU Utilization: $GPU_UTILIZATIONS $STARTING_MINER $LOW_UTILIZATION $FAILURES_REINIT $UTILIZATION_LOW_RESTART_3MAIN $LOST_GPU $REBOOT_ALERT $UTILIZATION_LOW_REBOOTING "
/usr/bin/curl -m 5 -s -X POST --output /dev/null https://api.telegram.org/bot${APIKEY}/sendMessage -d "text=${MSG}" -d chat_id=${CHATID}
In your 1bash add a line bellow APIKEY=$TELEGRAM_APIKEY and add your new alert api key TELEGRAM_ALERT_APIKEY="aaaaaaaaaaaaaaaaaaa:bbbbbbbbbbbb-cccccccccccccccccccccccc"
And here is my modified IAmNotAJeep_and_Maxximus007_WATCHDOG for telegram alerts: #!/bin/bash
# Miner restart script V002 # By Maxximus007 && IAmNotAJeep # for nvOC by fullzero # Modified by papampi for telegram-alerts
export DISPLAY=:0
# Creating a log file to record restarts LOG_FILE="/home/m1/5_restartlog" if [ -e "$LOG_FILE" ] ; then #Limit the logfile, just keep the last 2K LASTLOG=$(tail -n 2K $LOG_FILE) echo $LASTLOG echo "" fi
echo "$(date) - Starting miner restart script." | tee -a ${LOG_FILE} echo "" | tee -a ${LOG_FILE} bash '/home/m1/telegram-alert' # Give oneBash time to start to prevent reboot echo "$(date) - waiting 70 seconds before going 'on watch'" | tee -a ${LOG_FILE} sleep 60
THRESHOLD=90 RESTART=0 GPU_COUNT=$(nvidia-smi --query-gpu=count --format=csv,noheader,nounits | tail -1) COUNT=$((6 * $GPU_COUNT))
while true do sleep 10 # sleep 60 #IAmNotAJeep MOD from V002 JEEP=0 #IAmNotAJeep MOD from V002 GPU=0 REBOOTRESET=$(($REBOOTRESET + 1))
#IAmNotAJeep MOD from V002 echo "" echo " GPU_COUNT: " $GPU_COUNT | tee -a ${LOG_FILE}
#IAmNotAJeep MOD from V002
UTILIZATIONS=$(nvidia-smi --query-gpu=utilization.gpu --format=csv,noheader,nounits) echo "" echo "GPU UTILIZATION: " $UTILIZATIONS | tee -a ${LOG_FILE} echo "" | tee -a ${LOG_FILE}
numtest='^[0-9]+$' for UTIL in $UTILIZATIONS do if ! [[ $UTIL =~ $numtest ]] then # Not numeric so: Help we've lost a GPU, so reboot echo "$(date) - Lost GPU so restarting system. Found GPU's:" | tee -a ${LOG_FILE} echo "" | tee -a ${LOG_FILE} bash '/home/m1/telegram-alert' #Hope PCI BUS info will help find the faulty GPU nvidia-smi --query-gpu=gpu_bus_id --format=csv | tee -a ${LOG_FILE} echo "reboot in 10 seconds" | tee -a ${LOG_FILE} echo ""| tee -a ${LOG_FILE} bash '/home/m1/telegram-alert' sleep 10 sudo reboot fi
# If utilization is lower than threshold count them: if [ $UTIL -lt $THRESHOLD ] then echo "$(date) - GPU under threshold found" | tee -a ${LOG_FILE} echo "" | tee -a ${LOG_FILE} bash '/home/m1/telegram-alert' COUNT=$(($COUNT - 1)) #IAmNotAJeep MOD from V002 JEEP=$(($JEEP + 1)) #IAmNotAJeep MOD from V002 fi GPU=$(($GPU + 1)) done
#IAmNotAJeep MOD from V002 if [ $JEEP -gt 0 ] then
if [ $COUNT -le 0 ] then INTERNET_IS_GO=0 if nc -vzw1 google.com 443; #if nc -vzw1 $POOL 80; then INTERNET_IS_GO=1 fi echo "" if [[ $RESTART -gt 4 && $INTERNET_IS_GO == 1 ]] then echo "$(date) - Utilization is too low: reviving did not work so restarting system in 10 seconds" | tee -a ${LOG_FILE} echo "" | tee -a ${LOG_FILE} bash '/home/m1/telegram-alert' sleep 10 sudo reboot fi echo "$(date) - Utilization is too low: restart 3main" | tee -a ${LOG_FILE} # If miner runs in screen 'miner' kill the screen to be sure it's gone pkill -e miner bash '/home/m1/telegram-alert' # Best to restart oneBash - settings might be adjusted already target=$(ps -ef | awk '$NF~"3main" {print $2}') kill $target | tee -a ${LOG_FILE} echo "" | tee -a ${LOG_FILE} RESTART=$(($RESTART + 1)) REBOOTRESET=0 COUNT=$GPU_COUNT # Give oneBash time to restart to prevent reboot sleep 60 #fi else echo "$(date) - Low Utilization Detected: 3main will reinit if there are 6 consecutive failures" | tee -a ${LOG_FILE} echo "" echo " "$COUNT "Failures Before reinit" | tee -a ${LOG_FILE} bash '/home/m1/telegram-alert' #IAmNotAJeep MOD from V002 fi
else #IAmNotAJeep MOD from V002 COUNT=$((6 * $GPU_COUNT)) echo "$(date) - 5 by 5: REMEMBER TO THANK IAmNotAJeep and Maxximus007" #IAmNotAJeep MOD from V002 fi
# No need for a reboot after a while if [ $REBOOTRESET -gt 5 ] then RESTART=0 REBOOTRESET=0 fi done This is how it looks like when there is a gpu under threshold : Worker: nv102 Boot Time: 2017-09-04 12:17:17 Miner Uptime: 02:45:07 GPU Count: 7 GPU Utilization: 99 83 99 99 98 99 99
Mon Sep 4 15:03:53 IRDT 2017 - GPU under threshold found
Mon Sep 4 15:03:56 IRDT 2017 - Low Utilization Detected: 3main will reinit if there are 6 consecutive failures 41 Failures Before reinit Hopefull we get more/better integration for alerts from fullzero, Maxximus and IAmNotAJeep. Thanks all.
|
|
|
|
kk003
Member
Offline
Activity: 117
Merit: 10
|
|
September 04, 2017, 12:31:23 PM |
|
This is the scheme of my setup. Is a box 44cm wide x 32cm high and gpus are setup on two levels one on top of other. (1060 3Gb gpu) There is a raspberry pi wich allows me to reset/poweroff-on and control the inside temps using 5 sensors DS18B20. 12 fans push fresh air inside the box. They feed on an external psu. Temps with power limite 92W are 57-68ºC. By the way I had a big cpu load (5-14) when I had power limit to 72W. Once set to 92W got down to 1.5-2.2 (yes I know no good yet, but much better). I use a celeron g3900, looking forward to upgrade to I3. I post this hoping the schematic helps others like me who have their rig in remote locations. Here the code bits for temps, poweron/off and reset.
Hey man, that's a very nice DIY project you have there! And great schematics btw, thanks for sharing. I'm wondering, how much did it cost overall (Pi + fans + sensors and parts)? Did you try integrating it with nvOC's auto temp control, which uses the GPUs internal temp sensors, instead of relying on the DS18B20? I'm facing some heating issues here, as the days are becoming hotter, so I'm thinking about what to do. I don't want to leave an A/C on all day, because of energy costs, so probably will need something to suck the hot air from the GPUs to the outside during the day, and reverse direction at night, when it's colder outside. Your project really gives some ideas... Glad to be usefull. The pi 50€, pi kit 15€, 5 sensors with wire integrated about 19€ from amazon (I think), two channel relay 5€, other wires etc about 5€. I got the fans for free from a friend. Hope this week I will finish my telegram script which should be easily integrated in nvOC (I don't use it yet but I follow it close). I will code the bit relative to external sensors to send alerts/poweroff the box in case the internal temp raises to much so could be integrated and tested in nvOC by any mates around here if it looks usefull. Yeah, you could relay on external sensors's temp and a relay to manege those fans to push/get fresh air in/out of the room. I guest the fans you'll use should turn in both directions (I don't now if this is possible for the fans you need).
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
September 04, 2017, 01:47:32 PM |
|
Possible to mine nicehash equihash only?
When will KMD be integrated?
Guide to add KMD Add coin details KMD_WORKER="xxxx" KMD_ADDRESS="xxxxxx" KMD_POOL="kmd.suprnova.cc" KMD_PORT="6250" Add this to 3main file in right place: if [ $COIN == "KMD" ] then
if [ $EWBF_VERSION == "3_3" ] then HCD='/home/m1/KMD/v3_3/miner' fi
if [ $EWBF_VERSION == "3_4" ] then HCD='/home/m1/KMD/v3_4/miner' fi
KMDADDR="$KMD_ADDRESS.$KMD_WORKER"
screen -dmS miner $HCD --eexit 3 --fee $EWBF_PERCENT --pec --server $KMD_POOL --user $KMDADDR --pass z --port $KMD_PORT;
if [ $LOCALorREMOTE == "LOCAL" ] then screen -r miner fi
BITCOIN="theGROUND"
while [ $BITCOIN == "theGROUND" ] do sleep 60 done fi @fullzero I'm getting prepared all the coins (stuck with cryptonight algo coins ATM), will share once its ready. I have a question, what coins can we mine with ethminer (all 3 versions 11, 12dev, genoil) ? Can we mine any ethash coin using ethminer?? My point is when we mine any ethash like EXP, UBQ, MUSIC, SOIL its better mine then with 0 fee uing ethminer? I've tried to mine SOIL, but no success so far with ethminer, if someone succeeded using ethminer for any ethash, can you please share your 1bash and 3main, would like to integrate it with my version. Thanks. Thanks a lot for all the new coins. Since you getting warm on adding coins, is it ok if we ask for more? I think its good to have more ZPOOL algos like neoscrypt, equihash, myr-gr, ... @fullzero, Is it possible to add links for new coins in OP I think there are so many new, but hard to find in thread.
|
|
|
|
damNmad
Full Member
Offline
Activity: 378
Merit: 104
nvOC forever
|
|
September 04, 2017, 02:21:33 PM |
|
Possible to mine nicehash equihash only?
When will KMD be integrated?
Guide to add KMD Add coin details KMD_WORKER="xxxx" KMD_ADDRESS="xxxxxx" KMD_POOL="kmd.suprnova.cc" KMD_PORT="6250" Add this to 3main file in right place: if [ $COIN == "KMD" ] then
if [ $EWBF_VERSION == "3_3" ] then HCD='/home/m1/KMD/v3_3/miner' fi
if [ $EWBF_VERSION == "3_4" ] then HCD='/home/m1/KMD/v3_4/miner' fi
KMDADDR="$KMD_ADDRESS.$KMD_WORKER"
screen -dmS miner $HCD --eexit 3 --fee $EWBF_PERCENT --pec --server $KMD_POOL --user $KMDADDR --pass z --port $KMD_PORT;
if [ $LOCALorREMOTE == "LOCAL" ] then screen -r miner fi
BITCOIN="theGROUND"
while [ $BITCOIN == "theGROUND" ] do sleep 60 done fi @fullzero I'm getting prepared all the coins (stuck with cryptonight algo coins ATM), will share once its ready. I have a question, what coins can we mine with ethminer (all 3 versions 11, 12dev, genoil) ? Can we mine any ethash coin using ethminer?? My point is when we mine any ethash like EXP, UBQ, MUSIC, SOIL its better mine then with 0 fee uing ethminer? I've tried to mine SOIL, but no success so far with ethminer, if someone succeeded using ethminer for any ethash, can you please share your 1bash and 3main, would like to integrate it with my version. Thanks. Thanks a lot for all the new coins. Since you getting warm on adding coins, is it ok if we ask for more? I think its good to have more ZPOOL algos like neoscrypt, equihash, myr-gr, ... @fullzero, Is it possible to add links for new coins in OP I think there are so many new, but hard to find in thread. You are welcome Leave fullzero alone & pour all the COIN requests towards me What ever the coins I've added on this topic, added all of them to my 1bash and 3main, will share it fullzero probably tomorrow evening (hopefully).
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
September 04, 2017, 02:25:48 PM |
|
Possible to mine nicehash equihash only?
When will KMD be integrated?
Guide to add KMD Add coin details KMD_WORKER="xxxx" KMD_ADDRESS="xxxxxx" KMD_POOL="kmd.suprnova.cc" KMD_PORT="6250" Add this to 3main file in right place: if [ $COIN == "KMD" ] then
if [ $EWBF_VERSION == "3_3" ] then HCD='/home/m1/KMD/v3_3/miner' fi
if [ $EWBF_VERSION == "3_4" ] then HCD='/home/m1/KMD/v3_4/miner' fi
KMDADDR="$KMD_ADDRESS.$KMD_WORKER"
screen -dmS miner $HCD --eexit 3 --fee $EWBF_PERCENT --pec --server $KMD_POOL --user $KMDADDR --pass z --port $KMD_PORT;
if [ $LOCALorREMOTE == "LOCAL" ] then screen -r miner fi
BITCOIN="theGROUND"
while [ $BITCOIN == "theGROUND" ] do sleep 60 done fi @fullzero I'm getting prepared all the coins (stuck with cryptonight algo coins ATM), will share once its ready. I have a question, what coins can we mine with ethminer (all 3 versions 11, 12dev, genoil) ? Can we mine any ethash coin using ethminer?? My point is when we mine any ethash like EXP, UBQ, MUSIC, SOIL its better mine then with 0 fee uing ethminer? I've tried to mine SOIL, but no success so far with ethminer, if someone succeeded using ethminer for any ethash, can you please share your 1bash and 3main, would like to integrate it with my version. Thanks. Thanks a lot for all the new coins. Since you getting warm on adding coins, is it ok if we ask for more? I think its good to have more ZPOOL algos like neoscrypt, equihash, myr-gr, ... @fullzero, Is it possible to add links for new coins in OP I think there are so many new, but hard to find in thread. You are welcome Leave fullzero alone & pour all the COIN requests towards me What ever the coins I've added on this topic, added all of them to my 1bash and 3main, will share it fullzero probably tomorrow evening (hopefully). Awesome, Then I will wait till tomorrow and add them all. So we gonna have more Zpool algos from you?
|
|
|
|
Moordact
Newbie
Offline
Activity: 54
Merit: 0
|
|
September 04, 2017, 02:44:48 PM |
|
Forgive me if this questions has been answered already !
How can i have different worker names per system? i use 1 pastebin for all rigs.
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
September 04, 2017, 02:51:38 PM Last edit: September 06, 2017, 07:22:52 AM by papampi |
|
Is this correct for MPH_EQUIHASH ? Coin: 1bash: MPH_WORKER="$WORKERNAME" MPH_ADDRESS="papampi" MPH_EQUIHASH_POOL="us-east.equihash-hub.miningpoolhub.com" MPH_EQUIHASH_PORT="17023"
3main: if [ $COIN == "MPH_EQUIHASH" ] then
if [ $EWBF_VERSION == "3_3" ] then HCD='/home/m1/zec/v3_3/miner' fi
if [ $EWBF_VERSION == "3_4" ] then HCD='/home/m1/zec/v3_4/miner' fi
MPHADDR="$MPH_USERNAME.$MPH_WORKER"
screen -dmS miner $HCD --eexit 3 --fee $EWBF_PERCENT --pec --server $MPH_EQUIHASH_POOL --user $MPHADDR --pass z --port $MPH_EQUIHASH_PORT --api 0.0.0.0:42000 --log 2 --logfile ewbf.log;
if [ $LOCALorREMOTE == "LOCAL" ] then screen -r miner fi
BITCOIN="theGROUND"
while [ $BITCOIN == "theGROUND" ] do sleep 60 done fi
And this one coin: 1bash: # ZPOOL uses your BTC_ADDRESS ZPOOL_EQUIHASH_POOL="equihash.mine.zpool.ca" ZPOOL_EQUIHASH_PORT="2142" 3main: if [ $COIN == "ZPOOL_EQUIHASH" ] then
if [ $EWBF_VERSION == "3_3" ] then HCD='/home/m1/zec/v3_3/miner' fi
if [ $EWBF_VERSION == "3_4" ] then HCD='/home/m1/zec/v3_4/miner' fi
ZPOOLADDR="$BTC_ADDRESS.$WORKERNAME"
screen -dmS miner $HCD --eexit 3 --fee $EWBF_PERCENT --pec --server $ZPOOL_EQUIHASH_POOL --user $ZPOOLADDR --pass c=btc --port $ZPOOL_EQUIHASH_PORT --api 0.0.0.0:42000 --log 2 --logfile ewbf.log;
if [ $LOCALorREMOTE == "LOCAL" ] then screen -r miner fi
|
|
|
|
damNmad
Full Member
Offline
Activity: 378
Merit: 104
nvOC forever
|
|
September 04, 2017, 03:21:25 PM |
|
Possible to mine nicehash equihash only?
When will KMD be integrated?
Guide to add KMD Add coin details KMD_WORKER="xxxx" KMD_ADDRESS="xxxxxx" KMD_POOL="kmd.suprnova.cc" KMD_PORT="6250" Add this to 3main file in right place: if [ $COIN == "KMD" ] then
if [ $EWBF_VERSION == "3_3" ] then HCD='/home/m1/KMD/v3_3/miner' fi
if [ $EWBF_VERSION == "3_4" ] then HCD='/home/m1/KMD/v3_4/miner' fi
KMDADDR="$KMD_ADDRESS.$KMD_WORKER"
screen -dmS miner $HCD --eexit 3 --fee $EWBF_PERCENT --pec --server $KMD_POOL --user $KMDADDR --pass z --port $KMD_PORT;
if [ $LOCALorREMOTE == "LOCAL" ] then screen -r miner fi
BITCOIN="theGROUND"
while [ $BITCOIN == "theGROUND" ] do sleep 60 done fi @fullzero I'm getting prepared all the coins (stuck with cryptonight algo coins ATM), will share once its ready. I have a question, what coins can we mine with ethminer (all 3 versions 11, 12dev, genoil) ? Can we mine any ethash coin using ethminer?? My point is when we mine any ethash like EXP, UBQ, MUSIC, SOIL its better mine then with 0 fee uing ethminer? I've tried to mine SOIL, but no success so far with ethminer, if someone succeeded using ethminer for any ethash, can you please share your 1bash and 3main, would like to integrate it with my version. Thanks. Thanks a lot for all the new coins. Since you getting warm on adding coins, is it ok if we ask for more? I think its good to have more ZPOOL algos like neoscrypt, equihash, myr-gr, ... @fullzero, Is it possible to add links for new coins in OP I think there are so many new, but hard to find in thread. You are welcome Leave fullzero alone & pour all the COIN requests towards me What ever the coins I've added on this topic, added all of them to my 1bash and 3main, will share it fullzero probably tomorrow evening (hopefully). Awesome, Then I will wait till tomorrow and add them all. So we gonna have more Zpool algos from you? Yeah I will do ZPOOL algos as well, but only in the next version!
|
|
|
|
damNmad
Full Member
Offline
Activity: 378
Merit: 104
nvOC forever
|
|
September 04, 2017, 03:22:57 PM |
|
Is this correct for MPH_EQUIHASH ? Coin: 1bash: MPH_WORKER="$WORKERNAME" MPH_ADDRESS="papampi" MPH_EQUIHASH_POOL="us-east.equihash-hub.miningpoolhub.com" MPH_EQUIHASH_PORT="20570"
3main: if [ $COIN == "MPH_EQUIHASH" ] then
if [ $EWBF_VERSION == "3_3" ] then HCD='/home/m1/zec/v3_3/miner' fi
if [ $EWBF_VERSION == "3_4" ] then HCD='/home/m1/zec/v3_4/miner' fi
MPHADDR="$MPH_USERNAME.$MPH_WORKER"
screen -dmS miner $HCD --eexit 3 --fee $EWBF_PERCENT --pec --server $MPH_EQUIHASH_POOL --user $MPHADDR --pass z --port $MPH_EQUIHASH_PORT --api 0.0.0.0:42000 --log 2 --logfile ewbf.log;
if [ $LOCALorREMOTE == "LOCAL" ] then screen -r miner fi
BITCOIN="theGROUND"
while [ $BITCOIN == "theGROUND" ] do sleep 60 done fi
And this one coin: 1bash: # ZPOOL uses your BTC_ADDRESS ZPOOL_EQUIHASH_POOL="equihash.mine.zpool.ca" ZPOOL_EQUIHASH_PORT="2142" 3main: if [ $COIN == "ZPOOL_EQUIHASH" ] then
if [ $EWBF_VERSION == "3_3" ] then HCD='/home/m1/zec/v3_3/miner' fi
if [ $EWBF_VERSION == "3_4" ] then HCD='/home/m1/zec/v3_4/miner' fi
ZPOOLADDR="$BTC_ADDRESS.$WORKERNAME"
screen -dmS miner $HCD --eexit 3 --fee $EWBF_PERCENT --pec --server $ZPOOL_EQUIHASH_POOL --user $ZPOOLADDR --pass c=btc --port $ZPOOL_EQUIHASH_PORT --api 0.0.0.0:42000 --log 2 --logfile ewbf.log;
if [ $LOCALorREMOTE == "LOCAL" ] then screen -r miner fi
Yep, both are perfect, I will integrate these two to my updates, if that's ok with you
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
September 04, 2017, 03:53:17 PM |
|
Is this correct for MPH_EQUIHASH ? Coin: 1bash: MPH_WORKER="$WORKERNAME" MPH_ADDRESS="papampi" MPH_EQUIHASH_POOL="us-east.equihash-hub.miningpoolhub.com" MPH_EQUIHASH_PORT="20570"
3main: if [ $COIN == "MPH_EQUIHASH" ] then
if [ $EWBF_VERSION == "3_3" ] then HCD='/home/m1/zec/v3_3/miner' fi
if [ $EWBF_VERSION == "3_4" ] then HCD='/home/m1/zec/v3_4/miner' fi
MPHADDR="$MPH_USERNAME.$MPH_WORKER"
screen -dmS miner $HCD --eexit 3 --fee $EWBF_PERCENT --pec --server $MPH_EQUIHASH_POOL --user $MPHADDR --pass z --port $MPH_EQUIHASH_PORT --api 0.0.0.0:42000 --log 2 --logfile ewbf.log;
if [ $LOCALorREMOTE == "LOCAL" ] then screen -r miner fi
BITCOIN="theGROUND"
while [ $BITCOIN == "theGROUND" ] do sleep 60 done fi
And this one coin: 1bash: # ZPOOL uses your BTC_ADDRESS ZPOOL_EQUIHASH_POOL="equihash.mine.zpool.ca" ZPOOL_EQUIHASH_PORT="2142" 3main: if [ $COIN == "ZPOOL_EQUIHASH" ] then
if [ $EWBF_VERSION == "3_3" ] then HCD='/home/m1/zec/v3_3/miner' fi
if [ $EWBF_VERSION == "3_4" ] then HCD='/home/m1/zec/v3_4/miner' fi
ZPOOLADDR="$BTC_ADDRESS.$WORKERNAME"
screen -dmS miner $HCD --eexit 3 --fee $EWBF_PERCENT --pec --server $ZPOOL_EQUIHASH_POOL --user $ZPOOLADDR --pass c=btc --port $ZPOOL_EQUIHASH_PORT --api 0.0.0.0:42000 --log 2 --logfile ewbf.log;
if [ $LOCALorREMOTE == "LOCAL" ] then screen -r miner fi
Yep, both are perfect, I will integrate these two to my updates, if that's ok with you Sure, why not We are all here to help make nvOC become the best mining OS.
|
|
|
|
stef_stef
|
|
September 04, 2017, 06:48:12 PM |
|
Just updated my USB to v19 and I cannot start mining. I get this message 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 04:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 05:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1) 06:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
Mon Sep 4 14:47:36 2017 +-----------------------------------------------------------------------------+ | NVIDIA-SMI 384.59 Driver Version: 384.59 | |-------------------------------+----------------------+----------------------+ | GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC | | Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. | |===============================+======================+======================| | 0 GeForce GTX 1070 Off | 00000000:01:00.0 On | N/A | | 50% 55C P0 44W / 135W | 196MiB / 8113MiB | 21% Default | +-------------------------------+----------------------+----------------------+ | 1 GeForce GTX 1070 Off | 00000000:04:00.0 Off | N/A | | 50% 58C P0 48W / 135W | 19MiB / 8114MiB | 8% Default | +-------------------------------+----------------------+----------------------+ | 2 GeForce GTX 1070 Off | 00000000:05:00.0 Off | N/A | | 50% 52C P0 44W / 135W | 19MiB / 8114MiB | 17% Default | +-------------------------------+----------------------+----------------------+ | 3 GeForce GTX 1070 Off | 00000000:06:00.0 Off | N/A | | 50% 49C P0 51W / 135W | 19MiB / 8114MiB | 9% Default | +-------------------------------+----------------------+----------------------+ +-----------------------------------------------------------------------------+ | Processes: GPU Memory | | GPU PID Type Process name Usage | |=============================================================================| | 0 1067 G /usr/lib/xorg/Xorg 149MiB | | 0 1614 G compiz 43MiB | | 1 1067 G /usr/lib/xorg/Xorg 7MiB | | 2 1067 G /usr/lib/xorg/Xorg 7MiB | | 3 1067 G /usr/lib/xorg/Xorg 7MiB | +-----------------------------------------------------------------------------+
Power limit for GPU 00000000:01:00.0 was set to 135.00 W from 135.00 W.
Warning: persistence mode is disabled on this device. This settings will go back to default as soon as driver unloads (e.g. last application like nvidia-smi or cuda application terminates). Run with [--help | -h] switch to get more information on how to enable persistence mode.
Power limit for GPU 00000000:04:00.0 was set to 135.00 W from 135.00 W.
Warning: persistence mode is disabled on this device. This settings will go back to default as soon as driver unloads (e.g. last application like nvidia-smi or cuda application terminates). Run with [--help | -h] switch to get more information on how to enable persistence mode.
Power limit for GPU 00000000:05:00.0 was set to 135.00 W from 135.00 W.
Warning: persistence mode is disabled on this device. This settings will go back to default as soon as driver unloads (e.g. last application like nvidia-smi or cuda application terminates). Run with [--help | -h] switch to get more information on how to enable persistence mode.
Power limit for GPU 00000000:06:00.0 was set to 135.00 W from 135.00 W.
Warning: persistence mode is disabled on this device. This settings will go back to default as soon as driver unloads (e.g. last application like nvidia-smi or cuda application terminates). Run with [--help | -h] switch to get more information on how to enable persistence mode.
All done.
LAUNCHING: IAmNotAJeep_and_Maxximus007_WATCHDOG
LAUNCHING: Maxximus007_AUTO_TEMPERATURE_CONTROL
process in screen temp; attach with: screen -r temp
Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:0]) assigned value 100.
Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:0]) assigned value 850.
Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:1]) assigned value 100.
Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:1]) assigned value 850.
Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:2]) assigned value 100.
Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:2]) assigned value 850.
Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:3]) assigned value 100.
Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:3]) assigned value 850.
LAUNCHING: Mining Process
process in screen miner; attach with: screen -r miner
^R
And nothing happens afterward. Any ideas what to do?
|
|
|
|
bdog1234
|
|
September 04, 2017, 07:17:04 PM |
|
It is running. Press F12 then in the window that pops up type screen -r miner
It is set up this way on purpose so that no screen is attached by default and you can SSH in and monitor remotely.
|
|
|
|
kk003
Member
Offline
Activity: 117
Merit: 10
|
|
September 04, 2017, 07:24:28 PM |
|
I want to get running a new rig only with 2 970 gpus that I have around. The idea is to get the celeron G3900 I have on a 13 gpu rig and use it for this new rig and buy a I3 for the 13 gpus rig.
I would appreciate the confirmation of those users who have switched from celeron to i3 and who have effectively solved the cpu load by referring to the specific model of I3 used.
|
|
|
|
stef_stef
|
|
September 04, 2017, 07:32:16 PM |
|
It is running. Press F12 then in the window that pops up type screen -r miner
It is set up this way on purpose so that no screen is attached by default and you can SSH in and monitor remotely.
Yup, it was mining, I checked the pool, but it has stopped in the meantime. Anyways, when I press f12 and type -r miner I get this message m1@m1-desktop:~$ -r miner -r: command not found
|
|
|
|
|