[ mining os ] nvoc

[damNmad]

Hi!

I tried to mine Mona Coin on Lyra algo, but when the miner starts, he closes after seconds! i didint overclocked at the test.
i have 10x 1070 and 3x1060 with the new NVOC

At the Miner:

ccminer 1.8.2 for nvidia gpus........................
..................
.................

Intensity set to 21
Starting on stratum+tcp://mona.suprnova.cc:2995
NVML GPU Monotoring enable
13 miner threads started, using lyra2v2 algo
Stratum difficultly set to 1

After this, short time nothing, than screen terminated.




Have someone an idea what could it happens?

nice greets, thanks

I can confirm that your pool details are fine, make sure your worker details are set fine.

Code:

MONA_WORKER="suprnovaWorkerName"
MONA_ADDRESS="suprnovaLoginName"

May be try to reduce you intensity a bit probably?

[Alienbert]

Hi!

I tried to mine Mona Coin on Lyra algo, but when the miner starts, he closes after seconds! i didint overclocked at the test.
i have 10x 1070 and 3x1060 with the new NVOC

At the Miner:

ccminer 1.8.2 for nvidia gpus........................
..................
.................

Intensity set to 21
Starting on stratum+tcp://mona.suprnova.cc:2995
NVML GPU Monotoring enable
13 miner threads started, using lyra2v2 algo
Stratum difficultly set to 1

After this, short time nothing, than screen terminated.




Have someone an idea what could it happens?

nice greets, thanks

I can confirm that your pool details are fine, make sure your worker details are set fine.

Code:

MONA_WORKER="suprnovaWorkerName"
MONA_ADDRESS="suprnovaLoginName"

May be try to reduce you intensity a bit probably?

Thanks for your answer!
 The suprnovaLoginName is right, because when i try another one it writes, it cannot connect to stratum!
Is the WorkerName alone enough, or i also must write the worker pw?

now i tried with itensity 15 - same problem

[papampi]

Hi papampi,
I'm using your telegram messages. Excellent!

I've a small improvement for miner uptime (I got always empty), so I check command. There is used unknown option -p and failed

The universal solution is:

Code:

ps -eo comm,etime | grep -i miner | grep -vi cpu | awk '{print $2}'

Other infos are empty too, I check later

Thanks mate
I'm aware of some problems thats why we call beta version:)
Some info and hash rate on web has not completed yet , will try to add them all for next version.

[damNmad]

Hi!

I tried to mine Mona Coin on Lyra algo, but when the miner starts, he closes after seconds! i didint overclocked at the test.
i have 10x 1070 and 3x1060 with the new NVOC

At the Miner:

ccminer 1.8.2 for nvidia gpus........................
..................
.................

Intensity set to 21
Starting on stratum+tcp://mona.suprnova.cc:2995
NVML GPU Monotoring enable
13 miner threads started, using lyra2v2 algo
Stratum difficultly set to 1

After this, short time nothing, than screen terminated.




Have someone an idea what could it happens?

nice greets, thanks

I can confirm that your pool details are fine, make sure your worker details are set fine.

Code:

MONA_WORKER="suprnovaWorkerName"
MONA_ADDRESS="suprnovaLoginName"

May be try to reduce you intensity a bit probably?

Thanks for your answer!
 The suprnovaLoginName is right, because when i try another one it writes, it cannot connect to stratum!
Is the WorkerName alone enough, or i also must write the worker pw?

now i tried with itensity 15 - same problem

I would also suggest you to try TPccminer; to do so you need to edit the below lines

if [ $COIN == "MONA" ]
then
HCD='/home/m1/SPccminer/ccminer'
ADDR="$MONA_ADDRESS.$MONA_WORKER"

to this;

if [ $COIN == "MONA" ]
then
HCD='/home/m1/TPccminer/ccminer'
ADDR="$MONA_ADDRESS.$MONA_WORKER"

Give it a shot and let me know if it worked for you.

[papampi]

Thanks to damNmad and hurvajs77
New WTM auto switch is ready

Changes :
+ Switcher now check for difference between top coin and current mining coin profitability and wont switch if its less than the value given in 1bash
+ Miner restart faster now, no more 3main restart
- damNmad conditional OC settings not working for now, set it to no and set a default OC for all coins you choose  (looking for a workaround to fix it)

You can get the new scripts from HERE

[Alienbert]

Hi!

I tried to mine Mona Coin on Lyra algo, but when the miner starts, he closes after seconds! i didint overclocked at the test.
i have 10x 1070 and 3x1060 with the new NVOC

At the Miner:

ccminer 1.8.2 for nvidia gpus........................
..................
.................

Intensity set to 21
Starting on stratum+tcp://mona.suprnova.cc:2995
NVML GPU Monotoring enable
13 miner threads started, using lyra2v2 algo
Stratum difficultly set to 1

After this, short time nothing, than screen terminated.




Have someone an idea what could it happens?

nice greets, thanks

I can confirm that your pool details are fine, make sure your worker details are set fine.

Code:

MONA_WORKER="suprnovaWorkerName"
MONA_ADDRESS="suprnovaLoginName"

May be try to reduce you intensity a bit probably?

Thanks for your answer!
 The suprnovaLoginName is right, because when i try another one it writes, it cannot connect to stratum!
Is the WorkerName alone enough, or i also must write the worker pw?

now i tried with itensity 15 - same problem

I would also suggest you to try TPccminer; to do so you need to edit the below lines

if [ $COIN == "MONA" ]
then
HCD='/home/m1/SPccminer/ccminer'
ADDR="$MONA_ADDRESS.$MONA_WORKER"

to this;

if [ $COIN == "MONA" ]
then
HCD='/home/m1/TPccminer/ccminer'
ADDR="$MONA_ADDRESS.$MONA_WORKER"

Give it a shot and let me know if it worked for you.

Thanks, but the same problem.
I dont know what happens! ETH + ZEC runs great, no problems, but MONA doesnt run.

[papampi]

Hi!

I tried to mine Mona Coin on Lyra algo, but when the miner starts, he closes after seconds! i didint overclocked at the test.
i have 10x 1070 and 3x1060 with the new NVOC

At the Miner:

ccminer 1.8.2 for nvidia gpus........................
..................
.................

Intensity set to 21
Starting on stratum+tcp://mona.suprnova.cc:2995
NVML GPU Monotoring enable
13 miner threads started, using lyra2v2 algo
Stratum difficultly set to 1

After this, short time nothing, than screen terminated.




Have someone an idea what could it happens?

nice greets, thanks

I can confirm that your pool details are fine, make sure your worker details are set fine.

Code:

MONA_WORKER="suprnovaWorkerName"
MONA_ADDRESS="suprnovaLoginName"

May be try to reduce you intensity a bit probably?

Thanks for your answer!
 The suprnovaLoginName is right, because when i try another one it writes, it cannot connect to stratum!
Is the WorkerName alone enough, or i also must write the worker pw?

now i tried with itensity 15 - same problem

I would also suggest you to try TPccminer; to do so you need to edit the below lines

if [ $COIN == "MONA" ]
then
HCD='/home/m1/SPccminer/ccminer'
ADDR="$MONA_ADDRESS.$MONA_WORKER"

to this;

if [ $COIN == "MONA" ]
then
HCD='/home/m1/TPccminer/ccminer'
ADDR="$MONA_ADDRESS.$MONA_WORKER"

Give it a shot and let me know if it worked for you.

Thanks, but the same problem.
I dont know what happens! ETH + ZEC runs great, no problems, but MONA doesnt run.

I am mining Mona with ASccminer and intensity 21 with no problem and great hash rate on suprnova
are you sure you made your worker in suprnova settings?
suprnova dont creat worker automatically , you should make them manually

[crazydane]

General question about auto switching to most profitable coin.  If you do this, don't you want some automatic mechanism to convert what you're mining into Bitcoin very frequently?

If you don't, aren't you constantly chasing coins with high difficulty and by the time you manually convert them to Bitcoin or whatever, their value may have fallen greatly?

Back when I first started, I was using NiceHash, and it did exactly that, convert to BTC more or less in realtime.  But the fees with NiceHash are very high, which is why most people move on after a while.

Just trying to understand the pros and cons of auto switching and presumably hodl'ing, if you don't have time to spend on the exchanges everyday trading what you're mining, but just want to "set it and forget it".

Thanks

[papampi]

General question about auto switching to most profitable coin.  If you do this, don't you want some automatic mechanism to convert what you're mining into Bitcoin very frequently?

If you don't, aren't you constantly chasing coins with high difficulty and by the time you manually convert them to Bitcoin or whatever, their value may have fallen greatly?

Back when I first started, I was using NiceHash, and it did exactly that, convert to BTC more or less in realtime.  But the fees with NiceHash are very high, which is why most people move on after a while.

Just trying to understand the pros and cons of auto switching and presumably hodl'ing, if you don't have time to spend on the exchanges everyday trading what you're mining, but just want to "set it and forget it".

Thanks

If you want to get BTC as soon as you can, you have 2 options,
1- use pools like MPH and set auto exchange
2- use exchanges like bittrex and set auto exchange
If you want to hold, you hold and find right time to exchange

WTm Auto Switch dont depend much on value, its more about dropping difficulty and the more coins you can get at that time
I will write a strategy guide base on my 1-2 weeks auto switch on WTM soon.

[gs777]

Hi!

I tried to mine Mona Coin on Lyra algo, but when the miner starts, he closes after seconds! i didint overclocked at the test.
i have 10x 1070 and 3x1060 with the new NVOC

At the Miner:

ccminer 1.8.2 for nvidia gpus........................
..................
.................

Intensity set to 21
Starting on stratum+tcp://mona.suprnova.cc:2995
NVML GPU Monotoring enable
13 miner threads started, using lyra2v2 algo
Stratum difficultly set to 1

After this, short time nothing, than screen terminated.




Have someone an idea what could it happens?

nice greets, thanks

I can confirm that your pool details are fine, make sure your worker details are set fine.

Code:

MONA_WORKER="suprnovaWorkerName"
MONA_ADDRESS="suprnovaLoginName"

May be try to reduce you intensity a bit probably?

But where I have to setup my e Wallet address?
and where to get "suprnovaLoginName"?

[Alienbert]

Hi!

I tried to mine Mona Coin on Lyra algo, but when the miner starts, he closes after seconds! i didint overclocked at the test.
i have 10x 1070 and 3x1060 with the new NVOC

At the Miner:

ccminer 1.8.2 for nvidia gpus........................
..................
.................

Intensity set to 21
Starting on stratum+tcp://mona.suprnova.cc:2995
NVML GPU Monotoring enable
13 miner threads started, using lyra2v2 algo
Stratum difficultly set to 1

After this, short time nothing, than screen terminated.




Have someone an idea what could it happens?

nice greets, thanks

I can confirm that your pool details are fine, make sure your worker details are set fine.

Code:

MONA_WORKER="suprnovaWorkerName"
MONA_ADDRESS="suprnovaLoginName"

May be try to reduce you intensity a bit probably?

Thanks for your answer!
 The suprnovaLoginName is right, because when i try another one it writes, it cannot connect to stratum!
Is the WorkerName alone enough, or i also must write the worker pw?

now i tried with itensity 15 - same problem

I would also suggest you to try TPccminer; to do so you need to edit the below lines

if [ $COIN == "MONA" ]
then
HCD='/home/m1/SPccminer/ccminer'
ADDR="$MONA_ADDRESS.$MONA_WORKER"

to this;

if [ $COIN == "MONA" ]
then
HCD='/home/m1/TPccminer/ccminer'
ADDR="$MONA_ADDRESS.$MONA_WORKER"

Give it a shot and let me know if it worked for you.

Thanks, but the same problem.
I dont know what happens! ETH + ZEC runs great, no problems, but MONA doesnt run.

I am mining Mona with ASccminer and intensity 21 with no problem and great hash rate on suprnova
are you sure you made your worker in suprnova settings?
suprnova dont creat worker automatically , you should make them manually

Yes i created a worker!
i have something in the transactions history on suprnova from my tests, so i think the connection is not the problem
18114296         2017-10-12 08:24:09         Credit        Confirmed      1131252     0.00000829

[codereddew12]

Hi!

I tried to mine Mona Coin on Lyra algo, but when the miner starts, he closes after seconds! i didint overclocked at the test.
i have 10x 1070 and 3x1060 with the new NVOC

At the Miner:

ccminer 1.8.2 for nvidia gpus........................
..................
.................

Intensity set to 21
Starting on stratum+tcp://mona.suprnova.cc:2995
NVML GPU Monotoring enable
13 miner threads started, using lyra2v2 algo
Stratum difficultly set to 1

After this, short time nothing, than screen terminated.




Have someone an idea what could it happens?

nice greets, thanks

I can confirm that your pool details are fine, make sure your worker details are set fine.

Code:

MONA_WORKER="suprnovaWorkerName"
MONA_ADDRESS="suprnovaLoginName"

May be try to reduce you intensity a bit probably?

Thanks for your answer!
 The suprnovaLoginName is right, because when i try another one it writes, it cannot connect to stratum!
Is the WorkerName alone enough, or i also must write the worker pw?

now i tried with itensity 15 - same problem

I would also suggest you to try TPccminer; to do so you need to edit the below lines

if [ $COIN == "MONA" ]
then
HCD='/home/m1/SPccminer/ccminer'
ADDR="$MONA_ADDRESS.$MONA_WORKER"

to this;

if [ $COIN == "MONA" ]
then
HCD='/home/m1/TPccminer/ccminer'
ADDR="$MONA_ADDRESS.$MONA_WORKER"

Give it a shot and let me know if it worked for you.

Thanks, but the same problem.
I dont know what happens! ETH + ZEC runs great, no problems, but MONA doesnt run.

I am mining Mona with ASccminer and intensity 21 with no problem and great hash rate on suprnova
are you sure you made your worker in suprnova settings?
suprnova dont creat worker automatically , you should make them manually

What's your hashrate looking like and with what GPUs?

[crazydane]

WTm Auto Switch dont depend much on value, its more about dropping difficulty and the more coins you can get at that time

VERY interesting.  I'll will most certainly explore this further and if that is how it works, then auto exchanging to BTC might not be the best idea.

[Alienbert]

Hi!

I tried to mine Mona Coin on Lyra algo, but when the miner starts, he closes after seconds! i didint overclocked at the test.
i have 10x 1070 and 3x1060 with the new NVOC

At the Miner:

ccminer 1.8.2 for nvidia gpus........................
..................
.................

Intensity set to 21
Starting on stratum+tcp://mona.suprnova.cc:2995
NVML GPU Monotoring enable
13 miner threads started, using lyra2v2 algo
Stratum difficultly set to 1

After this, short time nothing, than screen terminated.




Have someone an idea what could it happens?

nice greets, thanks

I can confirm that your pool details are fine, make sure your worker details are set fine.

Code:

MONA_WORKER="suprnovaWorkerName"
MONA_ADDRESS="suprnovaLoginName"

May be try to reduce you intensity a bit probably?

Thanks for your answer!
 The suprnovaLoginName is right, because when i try another one it writes, it cannot connect to stratum!
Is the WorkerName alone enough, or i also must write the worker pw?

now i tried with itensity 15 - same problem

I would also suggest you to try TPccminer; to do so you need to edit the below lines

if [ $COIN == "MONA" ]
then
HCD='/home/m1/SPccminer/ccminer'
ADDR="$MONA_ADDRESS.$MONA_WORKER"

to this;

if [ $COIN == "MONA" ]
then
HCD='/home/m1/TPccminer/ccminer'
ADDR="$MONA_ADDRESS.$MONA_WORKER"

Give it a shot and let me know if it worked for you.

Thanks, but the same problem.
I dont know what happens! ETH + ZEC runs great, no problems, but MONA doesnt run.

I am mining Mona with ASccminer and intensity 21 with no problem and great hash rate on suprnova
are you sure you made your worker in suprnova settings?
suprnova dont creat worker automatically , you should make them manually

Yes i created a worker!
i have something in the transactions history on suprnova from my tests, so i think the connection is not the problem
18114296         2017-10-12 08:24:09         Credit        Confirmed      1131252     0.00000829

Now i looked at my sytem monitor and there are all CPUs on 100% when MONA mining starts, after few seconds screen terminated!
Could that be the problem?
Is it the same at your system?
or maybe 13 cards too much for the algo/system? How many cards do you have?

I have an i5 7600k - i dont think it has to low power

[codereddew12]

Hi!

I tried to mine Mona Coin on Lyra algo, but when the miner starts, he closes after seconds! i didint overclocked at the test.
i have 10x 1070 and 3x1060 with the new NVOC

At the Miner:

ccminer 1.8.2 for nvidia gpus........................
..................
.................

Intensity set to 21
Starting on stratum+tcp://mona.suprnova.cc:2995
NVML GPU Monotoring enable
13 miner threads started, using lyra2v2 algo
Stratum difficultly set to 1

After this, short time nothing, than screen terminated.




Have someone an idea what could it happens?

nice greets, thanks

I can confirm that your pool details are fine, make sure your worker details are set fine.

Code:

MONA_WORKER="suprnovaWorkerName"
MONA_ADDRESS="suprnovaLoginName"

May be try to reduce you intensity a bit probably?

Thanks for your answer!
 The suprnovaLoginName is right, because when i try another one it writes, it cannot connect to stratum!
Is the WorkerName alone enough, or i also must write the worker pw?

now i tried with itensity 15 - same problem

I would also suggest you to try TPccminer; to do so you need to edit the below lines

if [ $COIN == "MONA" ]
then
HCD='/home/m1/SPccminer/ccminer'
ADDR="$MONA_ADDRESS.$MONA_WORKER"

to this;

if [ $COIN == "MONA" ]
then
HCD='/home/m1/TPccminer/ccminer'
ADDR="$MONA_ADDRESS.$MONA_WORKER"

Give it a shot and let me know if it worked for you.

Thanks, but the same problem.
I dont know what happens! ETH + ZEC runs great, no problems, but MONA doesnt run.

I am mining Mona with ASccminer and intensity 21 with no problem and great hash rate on suprnova
are you sure you made your worker in suprnova settings?
suprnova dont creat worker automatically , you should make them manually

Yes i created a worker!
i have something in the transactions history on suprnova from my tests, so i think the connection is not the problem
18114296         2017-10-12 08:24:09         Credit        Confirmed      1131252     0.00000829

Now i looked at my sytem monitor and there are all CPUs on 100% when MONA mining starts, after few seconds screen terminated!
Could that be the problem?
Is it the same at your system?
or maybe 13 cards too much for the algo/system? How many cards do you have?

I have an i5 7600k - i dont think it has to low power

I was having the same issue you were and then I switched to the ASccminer noted by papampi above and it works great now! I am running 3 rigs with 8-10 GPUs on each rig. 

[mikespax]

Fullzero, could I recommend you leave your own addresses in the bash files? It makes it easier for me to get up and mining when I'm trying to troubleshoot with a fresh OS so I don't have to go and find my wallet addresses when I just want to make sure things are up and running.

Also, I've been having the same issues with MONA and some other coins, will try switching to ASccminer as well.

[Alienbert]

Hi!

I tried to mine Mona Coin on Lyra algo, but when the miner starts, he closes after seconds! i didint overclocked at the test.
i have 10x 1070 and 3x1060 with the new NVOC

At the Miner:

ccminer 1.8.2 for nvidia gpus........................
..................
.................

Intensity set to 21
Starting on stratum+tcp://mona.suprnova.cc:2995
NVML GPU Monotoring enable
13 miner threads started, using lyra2v2 algo
Stratum difficultly set to 1

After this, short time nothing, than screen terminated.




Have someone an idea what could it happens?

nice greets, thanks

I can confirm that your pool details are fine, make sure your worker details are set fine.

Code:

MONA_WORKER="suprnovaWorkerName"
MONA_ADDRESS="suprnovaLoginName"

May be try to reduce you intensity a bit probably?

Thanks for your answer!
 The suprnovaLoginName is right, because when i try another one it writes, it cannot connect to stratum!
Is the WorkerName alone enough, or i also must write the worker pw?

now i tried with itensity 15 - same problem

I would also suggest you to try TPccminer; to do so you need to edit the below lines

if [ $COIN == "MONA" ]
then
HCD='/home/m1/SPccminer/ccminer'
ADDR="$MONA_ADDRESS.$MONA_WORKER"

to this;

if [ $COIN == "MONA" ]
then
HCD='/home/m1/TPccminer/ccminer'
ADDR="$MONA_ADDRESS.$MONA_WORKER"

Give it a shot and let me know if it worked for you.

Thanks, but the same problem.
I dont know what happens! ETH + ZEC runs great, no problems, but MONA doesnt run.

I am mining Mona with ASccminer and intensity 21 with no problem and great hash rate on suprnova
are you sure you made your worker in suprnova settings?
suprnova dont creat worker automatically , you should make them manually

Yes i created a worker!
i have something in the transactions history on suprnova from my tests, so i think the connection is not the problem
18114296         2017-10-12 08:24:09         Credit        Confirmed      1131252     0.00000829

Now i looked at my sytem monitor and there are all CPUs on 100% when MONA mining starts, after few seconds screen terminated!
Could that be the problem?
Is it the same at your system?
or maybe 13 cards too much for the algo/system? How many cards do you have?

I have an i5 7600k - i dont think it has to low power

I was having the same issue you were and then I switched to the ASccminer noted by papampi above and it works great now! I am running 3 rigs with 8-10 GPUs on each rig. 

WOOW!!!
LOVE YOU <3
Now it works

How much do you OC and how many watts? now i tried with +50 +1150

[codereddew12]

I did +140 core and -800 mem; pulling about ~115W / GTX 1070. Idk if it's just me, but it seems that my earnings are significantly lower than what is reported on whattomine. I've only gotten 1.5 monacoin in the past 4 hours but whattomine states that I should be approximately 15 / day... Anyone know why? I know the suprnova server is located in Japan, so could that have something to do with it?

[mikespax]

A fresh installation seems to have fixed my temp control problems. Now to try to mine MONA!

[papampi]

I'm getting 35-36 Mh/s Monacoin with ASccminer GTX 1070 Gygabite and Asus
OC Values :
130Watt
120 CC
200 MC