|
chohav
|
 |
July 10, 2017, 10:33:48 AM |
|
Hi @all! What does it means ? Miner starts, works OK for over 4 hours and then error witout any recover... ╔════════════════════════════════════════════════════════════════╗
║ Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.7 ║
╚════════════════════════════════════════════════════════════════╝
ETH: 1 pool is specified
Main Ethereum pool is eth-ru2.dwarfpool.com:8008
DCR: 0 pool is specified
AMD OpenCL platform not found
Driver 368.81 is recommended for best performance and compatibility
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current
pool
CUDA initializing...
NVIDIA Cards available: 1
CUDA Driver Version/Runtime Version: 9.0/8.0
GPU #0: GeForce GTX 1060 6GB, 6144 MB available, 10 compute units, capability: 6.1
Total cards: 1
ETH: Stratum - connecting to 'eth-ru2.dwarfpool.com' <83.222.114.66> port 8008
ETH: Stratum - Connected (eth-ru2.dwarfpool.com:8008)
ETH: Authorized
No pool specified for Decred! Ethereum-only mining mode is enabled
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: eth-proxy stratum mode
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333
Setting DAG epoch #133...
Setting DAG epoch #133 for GPU0
Create GPU buffer for GPU0
ETH: 07/10/17-08:24:41 - New job from eth-ru2.dwarfpool.com:8008
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s
GPU0 DAG creation time - 7077 ms
Setting DAG epoch #133 for GPU0 done
ETH: 07/10/17-08:24:53 - SHARE FOUND - (GPU 0)
ETH: Share accepted (47 ms)!
GPU0 t=61C fan=36%
ETH: 07/10/17-08:25:19 - New job from eth-ru2.dwarfpool.com:8008
ETH - Total Speed: 24.811 Mh/s, Total Shares: 1, Rejected: 0, Time: 00:00
ETH: GPU0 24.811 Mh/s
GPU0 t=65C fan=38%
...
ETH: 07/10/17-11:32:06 - SHARE FOUND - (GPU 0)
ETH: Share accepted (47 ms)!
ETH: 07/10/17-11:32:17 - New job from eth-ru2.dwarfpool.com:8008
ETH - Total Speed: 24.905 Mh/s, Total Shares: 129, Rejected: 0, Time: 03:07
ETH: GPU0 24.905 Mh/s
ETH: 07/10/17-11:32:19 - New job from eth-ru2.dwarfpool.com:8008
ETH - Total Speed: 24.855 Mh/s, Total Shares: 129, Rejected: 0, Time: 03:07
ETH: GPU0 24.855 Mh/s
GPU0 t=68C fan=44%
GPU0 t=68C fan=44%
ETH: 07/10/17-11:32:56 - New job from eth-ru2.dwarfpool.com:8008
ETH - Total Speed: 24.893 Mh/s, Total Shares: 129, Rejected: 0, Time: 03:08
ETH: GPU0 24.893 Mh/s
GPU 0, GpuMiner cu_k1 failed 4, unspecified launch failure
GPU 0, GpuMiner kx failed 1
GPU 0 failed
GPU 0, GpuMiner cu_k1 failed 4, unspecified launch failure
GPU 0, GpuMiner kx failed 1
GPU 0 failed
ETH: 07/10/17-11:33:11 - New job from eth-ru2.dwarfpool.com:8008
ETH - Total Speed: 0.000 Mh/s, Total Shares: 129, Rejected: 0, Time: 03:08
ETH: GPU0 0.000 Mh/s
NVML: cannot get current temperature, error 999 (an internal driver error occurred)
NVML: cannot get current temperature, error 999 (an internal driver error occurred)
ETH: 07/10/17-11:33:19 - New job from eth-ru2.dwarfpool.com:8008
ETH - Total Speed: 0.000 Mh/s, Total Shares: 129, Rejected: 0, Time: 03:08
ETH: GPU0 0.000 Mh/s
NVML: cannot get current temperature, error 999 (an internal driver error occurred)
NVML: cannot get current temperature, error 999 (an internal driver error occurred)
ETH: 07/10/17-11:33:26 - New job from eth-ru2.dwarfpool.com:8008
ETH - Total Speed: 0.000 Mh/s, Total Shares: 129, Rejected: 0, Time: 03:08
ETH: GPU0 0.000 Mh/s
NVML: cannot get current temperature, error 999 (an internal driver error occurred)
NVML: cannot get current temperature, error 999 (an internal driver error occurred)
GPU0 t=0C fan=0%
WATCHDOG: GPU error, you need to restart miner :(
NVML: cannot get current temperature, error 999 (an internal driver error occurred)
Restarting OK, exit...
ETH: Stratum - connecting to 'eth-ru2.dwarfpool.com' <83.222.114.66> port 8008
Setting DAG epoch #133 for GPU0u2.dwarfpool.com:8008) compatibility
Create GPU buffer for GPU0ed! Ethereum-only mining mode is enabled
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)to turn on/off cards, "r" to reload pools, "e" or "d" to select current
╔════════════════════════════════════════════════════════════════╗
║ Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.7 ║
╚════════════════════════════════════════════════════════════════╝
ETH: Authorizedailable: 1
ETH: 1 pool is specifiedime Version: 9.0/8.0
Main Ethereum pool is eth-ru2.dwarfpool.com:8008 10 compute units, capability: 6.1
DCR: 0 pool is specified
AMD OpenCL platform not found
Driver 368.81 is recommended for best performance and compatibility
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current
pool
CUDA initializing...
NVIDIA Cards available: 1
CUDA Driver Version/Runtime Version: 9.0/8.0
GPU #0: GeForce GTX 1060 6GB, 6144 MB available, 10 compute units, capability: 6.1
Total cards: 1
GPU0 DAG creation time - 8448 ms
Setting DAG epoch #133 for GPU0 done
ETH: Stratum - connecting to 'eth-ru2.dwarfpool.com' <83.222.114.66> port 8008
ETH: Stratum - Connected (eth-ru2.dwarfpool.com:8008)
ETH: Authorized
No pool specified for Decred! Ethereum-only mining mode is enabled
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: eth-proxy stratum mode
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333
Setting DAG epoch #133...
server: bind failed with error: 10048 (port for remote management is busy, use different -mport value), next attemp
t in 20sec...
Setting DAG epoch #133 for GPU0
Create GPU buffer for GPU0
GPU0 t=65C fan=39%
GPU0 DAG creation time - 10940 ms
Setting DAG epoch #133 for GPU0 done
server: bind failed with error: 10048 (port for remote management is busy, use different -mport value), next attemp
t in 20sec...
GPU0 t=65C fan=39%
ETH: 07/10/17-11:34:28 - New job from eth-ru2.dwarfpool.com:8008
ETH: 07/10/17-11:34:28 - New job from eth-ru2.dwarfpool.com:8008
ETH - Total Speed: 9.742 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH - Total Speed: 9.750 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 9.742 Mh/s
ETH: GPU0 9.750 Mh/s
...
server: bind failed with error: 10048 (port for remote management is busy, use different -mport value), next attemp
t in 20sec...
GPU0 t=68C fan=45%
ETH: 07/10/17-13:26:24 - New job from eth-ru2.dwarfpool.com:8008
ETH: 07/10/17-13:26:24 - New job from eth-ru2.dwarfpool.com:8008
ETH - Total Speed: 6.577 Mh/s, Total Shares: 34, Rejected: 0, Time: 01:52
ETH - Total Speed: 19.688 Mh/s, Total Shares: 27, Rejected: 0, Time: 01:52
Restart miner do not help... Only full PC reboot Wha does it means - server: bind failed with error: 10048 (port for remote management is busy, use different -mport value), next attemp ? error: 10048 (port for remote management is busy, use different -mport value) Have you started more than one miner on the same rig? |
|
|
|
|
|
|
|
|
|
|
|
|
|
According to NIST and ECRYPT II, the cryptographic algorithms used in
Bitcoin are expected to be strong until at least 2030. (After that, it
will not be too difficult to transition to different algorithms.)
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
MetalHelmet
Newbie
 Offline
Activity: 74
Merit: 0
|
|
July 10, 2017, 10:39:45 AM |
|
error: 10048 (port for remote management is busy, use different -mport value) Have you started more than one miner on the same rig?
I use only one instance of Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v9.7 (only one EthDcrMiner64.exe process in TaskList) ... Maybe first (initial instance ) hangs up and another instance try to starts I use bat file @echo off
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
:restart
"d:\Mining\ETH\Claymore's Dual GPU Miner v9.7\EthDcrMiner64.exe" -epool eth-ru2.dwarfpool.com:8008 -ewal 0x.worker -epsw x
Timeout /t 10
goto :restart
pause
Seems like EthDcrMiner64.exe got an error "NVML: cannot get current temperature, error 999 (an internal driver error occurred)" and was terminated but not correctly and stayed in memory or just locked port. And bat file tried to restart it could not bind port (mport) ... |
|
|
|
|
kkourmousis
Member
Offline
Activity: 119
Merit: 10
|
|
July 10, 2017, 10:45:56 AM |
|
Hey everyone, new member here  Very nice work with your tools @Claymore, as a fellow programmer I salute you Here are some questions for anyone who can answer: Claymore,
Can you verify if you are in talk with AMD developers to get this bug thrashing issue fixed? While your at it, how about getting it fixed on the R9 280X also, I miss the 28MH/s speeds I used to get with Tahiti GPUs.
Yes I can confirm it, but it does not mean that this problem will be fixed. If I am not mistaken they are talking about Hashrate drop in latest DAG files. Is there any chance that if that gets fixed, the following will also gets fixed? AMD cards: on some cards you can notice non-constant mining speed in dual mode, sometimes speed becomes a bit slower. This issue was mostly fixed in recent versions, but not completely.
By the way, is the above the same as what some call "fluctuation" or is it a different thing? |
Buy me a souvlaki:
ETH: 0x22D1C05F89dbe036aABFFEc197949E635903C6FA
BTC: 1FHwEyiCqUTpauGfvPg5czMYoWMKqYGBWx
|
|
|
notbatman
Legendary
Offline
Activity: 2212
Merit: 1038
|
|
July 10, 2017, 10:58:34 AM |
|
Hi @all! What does it means ? Miner starts, works OK for over 4 hours and then error witout any recover... ╔════════════════════════════════════════════════════════════════╗
║ Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.7 ║
╚════════════════════════════════════════════════════════════════╝
ETH: 1 pool is specified
Main Ethereum pool is eth-ru2.dwarfpool.com:8008
DCR: 0 pool is specified
AMD OpenCL platform not found
Driver 368.81 is recommended for best performance and compatibility
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current
pool
CUDA initializing...
NVIDIA Cards available: 1
CUDA Driver Version/Runtime Version: 9.0/8.0
GPU #0: GeForce GTX 1060 6GB, 6144 MB available, 10 compute units, capability: 6.1
Total cards: 1
ETH: Stratum - connecting to 'eth-ru2.dwarfpool.com' <83.222.114.66> port 8008
ETH: Stratum - Connected (eth-ru2.dwarfpool.com:8008)
ETH: Authorized
No pool specified for Decred! Ethereum-only mining mode is enabled
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: eth-proxy stratum mode
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333
Setting DAG epoch #133...
Setting DAG epoch #133 for GPU0
Create GPU buffer for GPU0
ETH: 07/10/17-08:24:41 - New job from eth-ru2.dwarfpool.com:8008
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s
GPU0 DAG creation time - 7077 ms
Setting DAG epoch #133 for GPU0 done
ETH: 07/10/17-08:24:53 - SHARE FOUND - (GPU 0)
ETH: Share accepted (47 ms)!
GPU0 t=61C fan=36%
ETH: 07/10/17-08:25:19 - New job from eth-ru2.dwarfpool.com:8008
ETH - Total Speed: 24.811 Mh/s, Total Shares: 1, Rejected: 0, Time: 00:00
ETH: GPU0 24.811 Mh/s
GPU0 t=65C fan=38%
...
ETH: 07/10/17-11:32:06 - SHARE FOUND - (GPU 0)
ETH: Share accepted (47 ms)!
ETH: 07/10/17-11:32:17 - New job from eth-ru2.dwarfpool.com:8008
ETH - Total Speed: 24.905 Mh/s, Total Shares: 129, Rejected: 0, Time: 03:07
ETH: GPU0 24.905 Mh/s
ETH: 07/10/17-11:32:19 - New job from eth-ru2.dwarfpool.com:8008
ETH - Total Speed: 24.855 Mh/s, Total Shares: 129, Rejected: 0, Time: 03:07
ETH: GPU0 24.855 Mh/s
GPU0 t=68C fan=44%
GPU0 t=68C fan=44%
ETH: 07/10/17-11:32:56 - New job from eth-ru2.dwarfpool.com:8008
ETH - Total Speed: 24.893 Mh/s, Total Shares: 129, Rejected: 0, Time: 03:08
ETH: GPU0 24.893 Mh/s
GPU 0, GpuMiner cu_k1 failed 4, unspecified launch failure
GPU 0, GpuMiner kx failed 1
GPU 0 failed
GPU 0, GpuMiner cu_k1 failed 4, unspecified launch failure
GPU 0, GpuMiner kx failed 1
GPU 0 failed
ETH: 07/10/17-11:33:11 - New job from eth-ru2.dwarfpool.com:8008
ETH - Total Speed: 0.000 Mh/s, Total Shares: 129, Rejected: 0, Time: 03:08
ETH: GPU0 0.000 Mh/s
NVML: cannot get current temperature, error 999 (an internal driver error occurred)
NVML: cannot get current temperature, error 999 (an internal driver error occurred)
ETH: 07/10/17-11:33:19 - New job from eth-ru2.dwarfpool.com:8008
ETH - Total Speed: 0.000 Mh/s, Total Shares: 129, Rejected: 0, Time: 03:08
ETH: GPU0 0.000 Mh/s
NVML: cannot get current temperature, error 999 (an internal driver error occurred)
NVML: cannot get current temperature, error 999 (an internal driver error occurred)
ETH: 07/10/17-11:33:26 - New job from eth-ru2.dwarfpool.com:8008
ETH - Total Speed: 0.000 Mh/s, Total Shares: 129, Rejected: 0, Time: 03:08
ETH: GPU0 0.000 Mh/s
NVML: cannot get current temperature, error 999 (an internal driver error occurred)
NVML: cannot get current temperature, error 999 (an internal driver error occurred)
GPU0 t=0C fan=0%
WATCHDOG: GPU error, you need to restart miner :(
NVML: cannot get current temperature, error 999 (an internal driver error occurred)
Restarting OK, exit...
ETH: Stratum - connecting to 'eth-ru2.dwarfpool.com' <83.222.114.66> port 8008
Setting DAG epoch #133 for GPU0u2.dwarfpool.com:8008) compatibility
Create GPU buffer for GPU0ed! Ethereum-only mining mode is enabled
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)to turn on/off cards, "r" to reload pools, "e" or "d" to select current
╔════════════════════════════════════════════════════════════════╗
║ Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.7 ║
╚════════════════════════════════════════════════════════════════╝
ETH: Authorizedailable: 1
ETH: 1 pool is specifiedime Version: 9.0/8.0
Main Ethereum pool is eth-ru2.dwarfpool.com:8008 10 compute units, capability: 6.1
DCR: 0 pool is specified
AMD OpenCL platform not found
Driver 368.81 is recommended for best performance and compatibility
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current
pool
CUDA initializing...
NVIDIA Cards available: 1
CUDA Driver Version/Runtime Version: 9.0/8.0
GPU #0: GeForce GTX 1060 6GB, 6144 MB available, 10 compute units, capability: 6.1
Total cards: 1
GPU0 DAG creation time - 8448 ms
Setting DAG epoch #133 for GPU0 done
ETH: Stratum - connecting to 'eth-ru2.dwarfpool.com' <83.222.114.66> port 8008
ETH: Stratum - Connected (eth-ru2.dwarfpool.com:8008)
ETH: Authorized
No pool specified for Decred! Ethereum-only mining mode is enabled
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: eth-proxy stratum mode
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333
Setting DAG epoch #133...
server: bind failed with error: 10048 (port for remote management is busy, use different -mport value), next attemp
t in 20sec...
Setting DAG epoch #133 for GPU0
Create GPU buffer for GPU0
GPU0 t=65C fan=39%
GPU0 DAG creation time - 10940 ms
Setting DAG epoch #133 for GPU0 done
server: bind failed with error: 10048 (port for remote management is busy, use different -mport value), next attemp
t in 20sec...
GPU0 t=65C fan=39%
ETH: 07/10/17-11:34:28 - New job from eth-ru2.dwarfpool.com:8008
ETH: 07/10/17-11:34:28 - New job from eth-ru2.dwarfpool.com:8008
ETH - Total Speed: 9.742 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH - Total Speed: 9.750 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 9.742 Mh/s
ETH: GPU0 9.750 Mh/s
...
server: bind failed with error: 10048 (port for remote management is busy, use different -mport value), next attemp
t in 20sec...
GPU0 t=68C fan=45%
ETH: 07/10/17-13:26:24 - New job from eth-ru2.dwarfpool.com:8008
ETH: 07/10/17-13:26:24 - New job from eth-ru2.dwarfpool.com:8008
ETH - Total Speed: 6.577 Mh/s, Total Shares: 34, Rejected: 0, Time: 01:52
ETH - Total Speed: 19.688 Mh/s, Total Shares: 27, Rejected: 0, Time: 01:52
Restart miner do not help... Only full PC reboot Wha does it means - server: bind failed with error: 10048 (port for remote management is busy, use different -mport value), next attemp ? error: 10048 (port for remote management is busy, use different -mport value) Have you started more than one miner on the same rig? I think when application that terminates abruptly like in this case the ports that get opened have nothing to tell them to close and make them available again so when the application starts up again and tries to open the port it's already open but not connected to the currently running process. Zombies... |
|
|
|
|
syncis
Newbie
Offline
Activity: 16
Merit: 0
|
|
July 10, 2017, 11:01:35 AM |
|
Is it enough having windows 10 anniversary update or do you have to get creators update for it work?
Swapped out "sata to molex" to directly molex from psu but still no success, still keeps crashing with "cannot get target temprature"
|
|
|
|
|
yany
Newbie
Offline
Activity: 31
Merit: 0
|
|
July 10, 2017, 11:07:37 AM |
|
Is it enough having windows 10 anniversary update or do you have to get creators update for it work?
Swapped out "sata to molex" to directly molex from psu but still no success, still keeps crashing with "cannot get target temprature"
Why is it a question to some of you to update an OS to the latest stable version ever? Earlier versions have tons of bugs, security issues and stability problems that are fixed in the latest one. So I think nobody should ignore the updates in general cases not even if we talk about other topics than mining. In short: everybody, just update your rig OS and your problems will go |
|
|
|
|
MetalHelmet
Newbie
Offline
Activity: 74
Merit: 0
|
|
July 10, 2017, 11:07:44 AM |
|
I think when application that terminates abruptly like in this case the ports that get opened have nothing to tell them to close and make them available again so when the application starts up again and tries to open the port it's already open but not connected to the currently running process.
Zombies...
It's a problem.... Cause any application can get terminated ... And bat to restart is useless.... It should restart PC at all... Maybe Claymore can add option --selectnextfreeport - if select or default mport is locked - try to use next free port to avoid such problem... |
|
|
|
|
|
chohav
|
|
July 10, 2017, 11:33:16 AM |
|
I think when application that terminates abruptly like in this case the ports that get opened have nothing to tell them to close and make them available again so when the application starts up again and tries to open the port it's already open but not connected to the currently running process.
Zombies...
It's a problem.... Cause any application can get terminated ... And bat to restart is useless.... It should restart PC at all... Maybe Claymore can add option --selectnextfreeport - if select or default mport is locked - try to use next free port to avoid such problem... Yes, such option would be great. |
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
July 10, 2017, 11:45:01 AM |
|
Does -ttli option works with Nvidia cards?
I can not see any changes
You are correct, it is ignored for Nvidia cards currently. I will fix it in next update. I think when application that terminates abruptly like in this case the ports that get opened have nothing to tell them to close and make them available again so when the application starts up again and tries to open the port it's already open but not connected to the currently running process.
Zombies...
It's a problem.... Cause any application can get terminated ... And bat to restart is useless.... It should restart PC at all... Maybe Claymore can add option --selectnextfreeport - if select or default mport is locked - try to use next free port to avoid such problem... Yes, such option would be great. It's bad idea because remote manager won't know that new port is used. Just set "-mport 0" if you don't use remote manager. |
|
|
|
|
tpd09
|
|
July 10, 2017, 12:52:24 PM |
|
for Nvidia, do we still need to use the old 372.54 drivers or the latest 384.76?
Thanks
|
|
|
|
|
l33twannabe
Newbie
Offline
Activity: 35
Merit: 0
|
|
July 10, 2017, 12:53:08 PM |
|
Is there s way to limit GPU usage when using Claymore ? I own 1080Ti, but for mining purposes I would like to allocate only 50% of its resources. I need the other 50% of power to be able to work on my PC.
Found "-ethi" command, but putting "-ethi 0" in .bat file still doesn't seems to fix the issue. I get lower hash rates, but only by a bit (~30Mh/s) and GPU usage is at about 95%.
|
|
|
|
|
burgla7711
Newbie
Offline
Activity: 14
Merit: 0
|
|
July 10, 2017, 01:07:38 PM |
|
Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.6 recommends nVidia driver 368.81 while I'm using 382.53).
Does it means that Claymore's Dual ETH 9.6 just recommends driver that was actual on v9.6 was released ? Should I downgrade 382.53 to 368.81 ?
Or maybe update to actual version is 384.76 (2017.6.29) ?
I'm using the latest driver for 6 pieces of GTX 1070 in 7/24 with no problems: 180 MH/s. can you share your settings? i have 5 1060 and it locks up after 20 min of use and i need to reboot the system. i can only pin it on the miner. |
|
|
|
|
Toxic_Cat
Newbie
Offline
Activity: 23
Merit: 0
|
|
July 10, 2017, 01:14:30 PM |
|
Claymore 9.7
MSI 1060 3G Hynix Memory
+200 Core
+550 Memory
Giving me about 19.5 Mh/s on ETH SOLO.
So this version is not for Hynix Memory?
Only who have 20+ Mh/s is Samsung
|
|
|
|
|
burgla7711
Newbie
Offline
Activity: 14
Merit: 0
|
|
July 10, 2017, 01:16:36 PM |
|
increase your virtual memory |
|
|
|
|
NavyCuda
Member
Offline
Activity: 107
Merit: 10
|
|
July 10, 2017, 01:31:03 PM |
|
Is there s way to limit GPU usage when using Claymore ? I own 1080Ti, but for mining purposes I would like to allocate only 50% of its resources. I need the other 50% of power to be able to work on my PC.
Found "-ethi" command, but putting "-ethi 0" in .bat file still doesn't seems to fix the issue. I get lower hash rates, but only by a bit (~30Mh/s) and GPU usage is at about 95%.
I've found that with my GTX 970, running about 90% load with the miner means I can do most other tasks without issue. Can even play some old games like the first Far Cry and Half-Life 2. |
|
|
|
|
yany
Newbie
Offline
Activity: 31
Merit: 0
|
|
July 10, 2017, 01:32:36 PM |
|
I'm using the latest driver for 6 pieces of GTX 1070 in 7/24 with no problems: 180 MH/s.
can you share your settings? i have 5 1060 and it locks up after 20 min of use and i need to reboot the system. i can only pin it on the miner. EthDcrMiner64.exe -mode 1 -epool eu2.ethermine.org:4444 -ewal 0xb3f095c58ccefe4a596350fbf1397720857f3971.YourRig -epsw x -allpools 1 -allcoins 1 GPU & other settings were posted just a few lines above, also you can read my blog for all the details: jukesays.wordpress.com |
|
|
|
|
l33twannabe
Newbie
Offline
Activity: 35
Merit: 0
|
|
July 10, 2017, 01:42:37 PM |
|
Is there s way to limit GPU usage when using Claymore ? I own 1080Ti, but for mining purposes I would like to allocate only 50% of its resources. I need the other 50% of power to be able to work on my PC.
Found "-ethi" command, but putting "-ethi 0" in .bat file still doesn't seems to fix the issue. I get lower hash rates, but only by a bit (~30Mh/s) and GPU usage is at about 95%.
I've found that with my GTX 970, running about 90% load with the miner means I can do most other tasks without issue. Can even play some old games like the first Far Cry and Half-Life 2. Did you use "-ethi 0" or something else ? |
|
|
|
|
burgla7711
Newbie
Offline
Activity: 14
Merit: 0
|
|
July 10, 2017, 01:54:05 PM |
|
I'm using the latest driver for 6 pieces of GTX 1070 in 7/24 with no problems: 180 MH/s.
can you share your settings? i have 5 1060 and it locks up after 20 min of use and i need to reboot the system. i can only pin it on the miner. EthDcrMiner64.exe -mode 1 -epool eu2.ethermine.org:4444 -ewal 0xb3f095c58ccefe4a596350fbf1397720857f3971.YourRig -epsw x -allpools 1 -allcoins 1 GPU & other settings were posted just a few lines above, also you can read my blog for all the details: jukesays.wordpress.como ok, i didn't know if you had any other parameters in there. thanks |
|
|
|
|
burgla7711
Newbie
Offline
Activity: 14
Merit: 0
|
|
July 10, 2017, 02:27:06 PM |
|
|
|
|
|
|
bigwest60
Newbie
Offline
Activity: 2
Merit: 0
|
 |
July 10, 2017, 02:48:17 PM |
|
I am interested in tithing my profits but would like to automate. I am thinking that dual mode would be a good way to accomplish this. But I do not see setting to allocate 10% resources to a specific pool. I was thinking that -dcri option would be my best option, but am not sure. I guess I could specify one GPU to a specific pool. But I have 6 GPU's and that is more than I want to tithe (1/6 is about 16%). Are there any ideas or suggestions for me to accomplish this? TIA!
|
|
|
|
|
|
