Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[cdrx]

After long time one of my AMD cards crashed.

I had -tt 55 -fanmin 55 -fanmax 85

And log crashed shows me that fan was 0

I suspect that temperature was too high (though was night) like 58-60 degrees and having fanmax 85 coupled with undervot made the miner crash. Is it possible ?

well, it can be anything, not just temperature
The best way to find the cause is to go through the logs, just before the crash and see what caused GPU crash.

deleted logs. fan was showing 0 value, so made crashing the fan, I think... ?

[1714068378]

1714068378

[BoostOrDie]

Were there any perfomance upgrades in v11.8 since v11.5? is it worth upgrading?

[Digital_Seytan]

Team presents ...

"Claymore's Dual Ethereum + Decred/Siacoin/Lbry/Pascal/Blake2s/Keccak AMD+NVIDIA GPU Miner 11.7 / 11.8"

... half-fee edition

In this edition devfee is mined every 2 hours instead of every 1 hour in original version, so effective defvee % is 0.5% in single mining mode and 0.75% in dual mining mode.


Download link:

https://mega.nz/#F!anrwxDYZK!gxHKJvukNUvEH9xh4V4gGg

Thanks for this software claymore you have already earned enough, it would be better that you adjust the dev function a bit, so you do not need to continue with the software.

[Arzuzu]

Hi all, i've found a BUG, maybe minor but important, expecially to monitor the individual GPU perf.

From Claymore log: ...Total Shares: 5871(418+405+488+429+482+472+469+473+447+460+431+456+441), Rejected: 84(0+0+0+0+0+0+0+0+0+0+0+0+0), Time: 46:24

Claymore log (as stats with 's' at runtime) show 0 per each GPU even if, overall, there are 84 rejected shares, caused by a temporary disconnection.

------------------------

A separate request: is possibile to implement a RPC to set the DCRI both manually and automatically?

Thanks

[fapar]

After long time one of my AMD cards crashed.

I had -tt 55 -fanmin 55 -fanmax 85

And log crashed shows me that fan was 0

I suspect that temperature was too high (though was night) like 58-60 degrees and having fanmax 85 coupled with undervot made the miner crash. Is it possible ?

It is a pity that you deleted the logs of the miner. You must first understand the reason for stopping the cooler. Since the miner was set quite low limit temperature (tt 55), but the graphic card still overheated 85+C means the miner has not worked out the setting for the turnover of the cooler. I recommend using a third-party program to adjust the speed of the cooler. For example, OpenHardwareMonitor. MSI Afterburner not recommend because often he himself crashes.

[Rexmint]

"Max ETH share diff found: 38.736T"

I am correct to assume that it would require getting a share with the difficulty of 3,356.90 TH for your share to actually solve the block? So that would be a readout of 3356.900T in Claymore (or 3.356P depending on how it formats it)?

[LeeMrBig]

Hello,

I have issue with my rx480 mining rig, it runs before perfect, but i ahve to change ssd, and after the new win10 installation, the miner stuck after detecting pools.

I use latest win10 ltsb, asrock h81 btco pro r2.0 mobo. Onboard display is selected, and gen1 also.
I see my cards at the device manager, also installed the chipset driver, but the miner cannot start.

OverdriveNtool also detect my gpus. Change the mobo and the cpu as well, it isnt solve the issue, any idea?
I think something missing, but i dont have a clue, out of ideas

I got same problem yesterday after updating to 1803.
I had to run DDU to remove drivers and install BC drivers to get it work, it was no go for Adrenaline drivers (and AMD/ATI Pixel Clock Patcher).

DrX

What is BC drivers?
I got same problem yesterday after updating.

[fapar]

Hello,

I have issue with my rx480 mining rig, it runs before perfect, but i ahve to change ssd, and after the new win10 installation, the miner stuck after detecting pools.

I use latest win10 ltsb, asrock h81 btco pro r2.0 mobo. Onboard display is selected, and gen1 also.
I see my cards at the device manager, also installed the chipset driver, but the miner cannot start.

OverdriveNtool also detect my gpus. Change the mobo and the cpu as well, it isnt solve the issue, any idea?
I think something missing, but i dont have a clue, out of ideas

I got same problem yesterday after updating to 1803.
I had to run DDU to remove drivers and install BC drivers to get it work, it was no go for Adrenaline drivers (and AMD/ATI Pixel Clock Patcher).

DrX

What is BC drivers?
I got same problem yesterday after updating.

BC is the blockchain driver https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-Blockchain-Compute-Release-Notes.aspx
Many complain about the latest update (1803) of Microsoft. In the rigs it is mandatory to disable updates to the system and drivers of the videocard and monitor this.

[4ward]

Hello,

I have issue with my rx480 mining rig, it runs before perfect, but i ahve to change ssd, and after the new win10 installation, the miner stuck after detecting pools.

I use latest win10 ltsb, asrock h81 btco pro r2.0 mobo. Onboard display is selected, and gen1 also.
I see my cards at the device manager, also installed the chipset driver, but the miner cannot start.

OverdriveNtool also detect my gpus. Change the mobo and the cpu as well, it isnt solve the issue, any idea?
I think something missing, but i dont have a clue, out of ideas

I got same problem yesterday after updating to 1803.
I had to run DDU to remove drivers and install BC drivers to get it work, it was no go for Adrenaline drivers (and AMD/ATI Pixel Clock Patcher).

DrX

What is BC drivers?
I got same problem yesterday after updating.

BC is the blockchain driver https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-Blockchain-Compute-Release-Notes.aspx
Many complain about the latest update (1803) of Microsoft. In the rigs it is mandatory to disable updates to the system and drivers of the videocard and monitor this.

Starting with 18.3.4 there no reason to go back to Blockchain drivers.
18.4.1 were bad, but 18.5.1 are decent again, so I would just stick to these or 18.3.4

[andmine60]

Hello,

I have issue with my rx480 mining rig, it runs before perfect, but i ahve to change ssd, and after the new win10 installation, the miner stuck after detecting pools.

I use latest win10 ltsb, asrock h81 btco pro r2.0 mobo. Onboard display is selected, and gen1 also.
I see my cards at the device manager, also installed the chipset driver, but the miner cannot start.

OverdriveNtool also detect my gpus. Change the mobo and the cpu as well, it isnt solve the issue, any idea?
I think something missing, but i dont have a clue, out of ideas

I got same problem yesterday after updating to 1803.
I had to run DDU to remove drivers and install BC drivers to get it work, it was no go for Adrenaline drivers (and AMD/ATI Pixel Clock Patcher).

DrX

What is BC drivers?
I got same problem yesterday after updating.

BC is the blockchain driver pute-Release-Notes.aspx]https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-[Suspicious link removed]pute-Release-Notes.aspx
Many complain about the latest update (1803) of Microsoft. In the rigs it is mandatory to disable updates to the system and drivers of the videocard and monitor this.

Starting with 18.3.4 there no reason to go back to Blockchain drivers.
18.4.1 were bad, but 18.5.1 are decent again, so I would just stick to these or 18.3.4

Has anyone figured out a fix to this?  I have three rigs and two are up and running but one day all of a sudden one rig went down and it took almost two weeks just to get the drivers recognized by windows again (error code 43) but now they work (using 18.5.1 amd drivers) the only part that doesn't work now is the claymore miner it just gets stuck now after pools are specified.  I tried turning firewalls off and that didn't work, updated almost everything, patched drivers, and also rolled back from 1803 to 1709.  I just can't seem to figure this out.

[ant17]

Were there any perfomance upgrades in v11.8 since v11.5? is it worth upgrading?

I've had better performance with 11.5 than any other after that. I use rx580s, and the only performance I check is eth payouts.

[iRrromka]

Were there any perfomance upgrades in v11.8 since v11.5? is it worth upgrading?

I've had better performance with 11.5 than any other after that. I use rx580s, and the only performance I check is eth payouts.

You should take network's difficulty into consideration, not just miner perfomance. What about hashrate|sharerate of your rx?

[DrX]

Hello,

I have issue with my rx480 mining rig, it runs before perfect, but i ahve to change ssd, and after the new win10 installation, the miner stuck after detecting pools.

I use latest win10 ltsb, asrock h81 btco pro r2.0 mobo. Onboard display is selected, and gen1 also.
I see my cards at the device manager, also installed the chipset driver, but the miner cannot start.

OverdriveNtool also detect my gpus. Change the mobo and the cpu as well, it isnt solve the issue, any idea?
I think something missing, but i dont have a clue, out of ideas

I got same problem yesterday after updating to 1803.
I had to run DDU to remove drivers and install BC drivers to get it work, it was no go for Adrenaline drivers (and AMD/ATI Pixel Clock Patcher).

DrX

What is BC drivers?
I got same problem yesterday after updating.

BC is the blockchain driver https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-Blockchain-Compute-Release-Notes.aspx
Many complain about the latest update (1803) of Microsoft. In the rigs it is mandatory to disable updates to the system and drivers of the videocard and monitor this.

Starting with 18.3.4 there no reason to go back to Blockchain drivers.
18.4.1 were bad, but 18.5.1 are decent again, so I would just stick to these or 18.3.4

I tested 18.2.1, 18.3.4 and 18.5.1, none of them worked after 1803 update, after pixel patcher system starts stuttering and claymore got stuck on start, only way to get past that was to install blockchain driver. Before update I was running 18.3.4. and those worked well. My system is almost identical (6xRX480 and H81 BTC)

[KL0nLutiy1]

Hello,

I have issue with my rx480 mining rig, it runs before perfect, but i ahve to change ssd, and after the new win10 installation, the miner stuck after detecting pools.

I use latest win10 ltsb, asrock h81 btco pro r2.0 mobo. Onboard display is selected, and gen1 also.
I see my cards at the device manager, also installed the chipset driver, but the miner cannot start.

OverdriveNtool also detect my gpus. Change the mobo and the cpu as well, it isnt solve the issue, any idea?
I think something missing, but i dont have a clue, out of ideas

I got same problem yesterday after updating to 1803.
I had to run DDU to remove drivers and install BC drivers to get it work, it was no go for Adrenaline drivers (and AMD/ATI Pixel Clock Patcher).

DrX

What is BC drivers?
I got same problem yesterday after updating.

BC is the blockchain driver https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-Blockchain-Compute-Release-Notes.aspx
Many complain about the latest update (1803) of Microsoft. In the rigs it is mandatory to disable updates to the system and drivers of the videocard and monitor this.

Starting with 18.3.4 there no reason to go back to Blockchain drivers.
18.4.1 were bad, but 18.5.1 are decent again, so I would just stick to these or 18.3.4

I tested 18.2.1, 18.3.4 and 18.5.1, none of them worked after 1803 update, after pixel patcher system starts stuttering and claymore got stuck on start, only way to get past that was to install blockchain driver. Before update I was running 18.3.4. and those worked well. My system is almost identical (6xRX480 and H81 BTC)

Try to use 18.5.2 drivers

[playfast]

This is how I always restart my AMD/windows 10 rig without issues:
1. Stop mining and reset cards to stock in OverdriveNtool.
2. Power off system, including PSU and wait 60+ seconds.
3. Power on system, wait 30+ seconds after desktop loads, and reboot once.
4. Wait 60+ seconds after desktop loads and then apply OverdriveNtool profiles.
5. Start miner.

[Nvid]

Can I mine ETC on Windows 10 with Nvidia 1060 3gbs?

Thanks.

[ant17]

Were there any perfomance upgrades in v11.8 since v11.5? is it worth upgrading?

I've had better performance with 11.5 than any other after that. I use rx580s, and the only performance I check is eth payouts.

You should take network's difficulty into consideration, not just miner perfomance. What about hashrate|sharerate of your rx?

How would you take networks difficulty into consideration??? Can you please give an example.... Hashrate for 13 x rx580 is about 408 and the shares are about 6 per minute. I have experimented with higher hashrate configurations, but the payout was lower.

[denis1995]

Im mining with Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v11.8 miner , But when I was mining whalecoin or ethereum i was getting 22mhs  per card. And now Im mining EtherZero and Im getting 11mhs per card? How to fix that? And after few mins mining OpenCl error -4 http://prntscr.com/jpyhaf

[SundanceKid2020]

Im mining with Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v11.8 miner , But when I was mining whalecoin or ethereum i was getting 22mhs  per card. And now Im mining EtherZero and Im getting 11mhs per card? How to fix that? And after few mins mining OpenCl error -4 http://prntscr.com/jpyhaf

GPU memory size?

[Nvid]

will 3gb cards work to mine ethereum on Windows 10? 10x