doktor83 (OP)
|
 |
April 12, 2018, 12:34:59 PM |
|
but i have 2 rigs. rig 1 is not affected. only rig 2. here are my specs:
rig 1: sap rx 570 nitro+ 4gb (samsung)
rig 2: powercolor rx 570 red devil 4gb (hynix&elpida)
Now that is really strange, both cards are 570 4g, i will check what is happening. Regarding hw errors, that means the result GPU returned could not be validated on the CPU, because it's wrong. If you have a few errors don't worry, but if you got a lot i would start with lowering intensity. Intensity can be a decimal number, so for example if you now use 35, you can try 34.5. If not satisfying then 34 and so on. 
|
|
|
|
tenmoi
Newbie
Offline
Activity: 59
Merit: 0
|
 |
April 12, 2018, 12:41:50 PM |
|
Doktor, don’t know if this is possible but can you let the gpu run idle when there aren’t any jobs from the pool? Less heat and power waste. 
|
|
|
|
rig1313
Newbie
Offline
Activity: 16
Merit: 0
|
 |
April 12, 2018, 01:14:10 PM |
|
Hello Doctor
I have these cards on Asrock h110 13slots
2*Rx 560 4GB--------500 h/s 3*Rx 470 4GB--------670 h/s 3*Rx 470 8GB--------880 h/s Rx 480 8GB----------1050 h/s Rx 570 4GB-----------700 h/s
my hashrate dropping alot
its not intensity problem , ive tried alot of numbers with/without double_threads
swinging hashrate -20%
i set virtual memory 100 GB
|
|
|
|
inv1s1bl3
Newbie
Offline
Activity: 65
Merit: 0
|
 |
April 12, 2018, 01:14:43 PM |
|
Dok, is there a way to set a constant difficulty? I think I am getting better hashrate when I am mining on lower difficulty tho, that's why I am asking
|
|
|
|
Boss_One
Newbie
Offline
Activity: 14
Merit: 0
|
 |
April 12, 2018, 01:16:18 PM |
|
Hello I'm using 2 old RADEON 6950 on 2 different computer. It's the 1st miner could hash from the Monero V7 fork and I'm happy to discover this miner!  I have a hashrate problem, I can't reach better than 145 H / s. Before the Fork I was doing 350 H / s with this card with other miner. I've tried the automatic intensity, and a lot of between 0 - 300 i've got the max with intensity 15 Is this card compatible with this miner ? Already it is stable and there is HASHRATE. Which is not the case with any other minor i've tried ... I hope you could help me with my 2 old radeon card. I'm Using Windows 8.1 X64 The last WHQL Driver for this card "15.7.1" There is some recommendation about the driver revision or other tips to Hash more with that card ? Thank you for your work @doktor83 I quoted myself Any idea about this card ? The blockchain driver did'nt work and the laster beta drivers didn't work too. So only the WHQL 15.7.1 driver works at low hasrate. Since the hard fork claymore doesn't support older card than 6xxx, i think u have a lot of old miner could be interested by your miner, i saw same problem on other forum as mine with this 6xxx card can't hash, SRB Miner is the only one could hash with my card. I've tried 1.3.0 /1.3.1 / and 1.3.2 version with same result. I hope you could help me. 
|
|
|
|
RaidoP2
Newbie
Offline
Activity: 61
Merit: 0
|
 |
April 12, 2018, 01:19:51 PM |
|
Hello I'm using 2 old RADEON 6950 on 2 different computer. It's the 1st miner could hash from the Monero V7 fork and I'm happy to discover this miner!  I have a hashrate problem, I can't reach better than 145 H / s. Before the Fork I was doing 350 H / s with this card with other miner. I've tried the automatic intensity, and a lot of between 0 - 300 i've got the max with intensity 15 Is this card compatible with this miner ? Already it is stable and there is HASHRATE. Which is not the case with any other minor i've tried ... I hope you could help me with my 2 old radeon card. I'm Using Windows 8.1 X64 The last WHQL Driver for this card "15.7.1" There is some recommendation about the driver revision or other tips to Hash more with that card ? Thank you for your work @doktor83 I quoted myself Any idea about this card ? The blockchain driver did'nt work and the laster beta drivers didn't work too. So only the WHQL 15.7.1 driver works at low hasrate. Since the hard fork claymore doesn't support older card than 6xxx, i think u have a lot of old miner could be interested by your miner, i saw same problem on other forum as mine with this 6xxx card can't hash, SRB Miner is the only one could hash with my card. I hope you could help me. The blockchain and latest drivers won't work with this card because it is a pre-GCN card. Probably need custom timings in BIOS and overclock memory to get better hashrate.
|
|
|
|
Boss_One
Newbie
Offline
Activity: 14
Merit: 0
|
 |
April 12, 2018, 01:24:33 PM |
|
Hello I'm using 2 old RADEON 6950 on 2 different computer. It's the 1st miner could hash from the Monero V7 fork and I'm happy to discover this miner!  I have a hashrate problem, I can't reach better than 145 H / s. Before the Fork I was doing 350 H / s with this card with other miner. I've tried the automatic intensity, and a lot of between 0 - 300 i've got the max with intensity 15 Is this card compatible with this miner ? Already it is stable and there is HASHRATE. Which is not the case with any other minor i've tried ... I hope you could help me with my 2 old radeon card. I'm Using Windows 8.1 X64 The last WHQL Driver for this card "15.7.1" There is some recommendation about the driver revision or other tips to Hash more with that card ? Thank you for your work @doktor83 I quoted myself Any idea about this card ? The blockchain driver did'nt work and the laster beta drivers didn't work too. So only the WHQL 15.7.1 driver works at low hasrate. Since the hard fork claymore doesn't support older card than 6xxx, i think u have a lot of old miner could be interested by your miner, i saw same problem on other forum as mine with this 6xxx card can't hash, SRB Miner is the only one could hash with my card. I hope you could help me. The blockchain and latest drivers won't work with this card because it is a pre-GCN card. Probably need custom timings in BIOS and overclock memory to get better hashrate. Ok and what about the hasrate 350 before hard fork ==> 145h/s after ?  I know it's a very oldcard, but 700h/s on two card was prety good for those grandma  i'm at the maximum OC AMD Override let me put : Gpu 800@840 Memory 1250@1350, Memory speed didn't impact the hashrate. It's seems the miner didn't take all the GPU "powerfull"
|
|
|
|
stsocrat
Newbie
Offline
Activity: 24
Merit: 0
|
 |
April 12, 2018, 02:01:39 PM |
|
Wanna more than 200 at RX550 2Gb Buffin unlocked! Please, help with config((
|
|
|
|
iisbetoq
Jr. Member
Offline
Activity: 166
Merit: 1
|
 |
April 12, 2018, 02:41:23 PM |
|
Wanna more than 200 at RX550 2Gb Buffin unlocked! Please, help with config((
have you mod your bios download this https://github.com/jaschaknack/PolarisBiosEditorbackup your bios click one time timing flash with winatiflash done
|
|
|
|
CryptoPlay
Jr. Member
Offline
Activity: 202
Merit: 2
|
 |
April 12, 2018, 02:58:06 PM |
|
Wanna more than 200 at RX550 2Gb Buffin unlocked! Please, help with config((
This card does 400 to 450.
|
https://signature.statseb.fr/sig-2065.png
|
|
|
RaidoP2
Newbie
Offline
Activity: 61
Merit: 0
|
 |
April 12, 2018, 03:03:03 PM |
|
Hello I'm using 2 old RADEON 6950 on 2 different computer. It's the 1st miner could hash from the Monero V7 fork and I'm happy to discover this miner!  I have a hashrate problem, I can't reach better than 145 H / s. Before the Fork I was doing 350 H / s with this card with other miner. I've tried the automatic intensity, and a lot of between 0 - 300 i've got the max with intensity 15 Is this card compatible with this miner ? Already it is stable and there is HASHRATE. Which is not the case with any other minor i've tried ... I hope you could help me with my 2 old radeon card. I'm Using Windows 8.1 X64 The last WHQL Driver for this card "15.7.1" There is some recommendation about the driver revision or other tips to Hash more with that card ? Thank you for your work @doktor83 I quoted myself Any idea about this card ? The blockchain driver did'nt work and the laster beta drivers didn't work too. So only the WHQL 15.7.1 driver works at low hasrate. Since the hard fork claymore doesn't support older card than 6xxx, i think u have a lot of old miner could be interested by your miner, i saw same problem on other forum as mine with this 6xxx card can't hash, SRB Miner is the only one could hash with my card. I hope you could help me. The blockchain and latest drivers won't work with this card because it is a pre-GCN card. Probably need custom timings in BIOS and overclock memory to get better hashrate. Ok and what about the hasrate 350 before hard fork ==> 145h/s after ?  I know it's a very oldcard, but 700h/s on two card was prety good for those grandma  i'm at the maximum OC AMD Override let me put : Gpu 800@840 Memory 1250@1350, Memory speed didn't impact the hashrate. It's seems the miner didn't take all the GPU "powerfull" Which miner did you use previously? Probably better optimized kernel or something to give better hashrate. SRB probably isn't optimized for older cards, maybe try with XMR-STAK?
|
|
|
|
hitmandn
Newbie
Offline
Activity: 35
Merit: 0
|
 |
April 12, 2018, 05:02:13 PM |
|
Hi there
This config for normalv7, i set intensity, fixed value (example: 44) ----> it's run and has good hash (for xmr coin) { /* Type can be : normal, normalv7, lite, litev7, heavy, ultraheavy */ "cryptonight_type" : "normalv7",
/* Intensity 0-> auto intensity, or value from 1-200 */ "intensity" : 44,
/* To use 2 threads per card set double_threads to true */ "double_threads" : true,
but i change to heavy, it's not run and has bug (for sumo coin) { /* Type can be : normal, normalv7, lite, litev7, heavy, ultraheavy */ "cryptonight_type" : "heavy",
/* Intensity 0-> auto intensity, or value from 1-200 */ "intensity" : 44,
/* To use 2 threads per card set double_threads to true */ "double_threads" : true,
Please help me
|
|
|
|
WhyMe
|
 |
April 12, 2018, 05:43:03 PM |
|
Wanna more than 200 at RX550 2Gb Buffin unlocked! Please, help with config((
This card does 400 to 450. Mine does with Claymore, not with SRB.
|
|
|
|
cvsea
Member

Offline
Activity: 112
Merit: 10
|
 |
April 12, 2018, 05:45:49 PM |
|
Hey dok,
What's the word on all the rejected shares when mining at nicehash (about 5%)? Could a fix be found?
Getting both outdated and invalid nonce rejects. In comparison, gateless gate gives 0 rejects but speed is not on par poolside.
|
|
|
|
R0land
Jr. Member
Offline
Activity: 208
Merit: 3
|
 |
April 12, 2018, 06:00:23 PM |
|
Wanna more than 200 at RX550 2Gb Buffin unlocked! Please, help with config((
This card does 400 to 450. The Lexa RX550 does 450, but not the Baffin RX550 with slow 1500 MHz memory.
|
|
|
|
Velmerk
Newbie
Offline
Activity: 23
Merit: 0
|
 |
April 12, 2018, 06:44:56 PM |
|
1.3.2 Vega56 - same hashrate as CAST-XMR, ~1800-1900 (GPU 1474, MEM 920, PL -15%) blockchain driver. Its good. Now i will test stability.
{ "id" : 0, "intensity" : 120, "worksize" : 8, "threads" : 2},
|
|
|
|
rig1313
Newbie
Offline
Activity: 16
Merit: 0
|
 |
April 12, 2018, 06:51:53 PM |
|
Hi there
This config for normalv7, i set intensity, fixed value (example: 44) ----> it's run and has good hash (for xmr coin) { /* Type can be : normal, normalv7, lite, litev7, heavy, ultraheavy */ "cryptonight_type" : "normalv7",
/* Intensity 0-> auto intensity, or value from 1-200 */ "intensity" : 44,
/* To use 2 threads per card set double_threads to true */ "double_threads" : true,
but i change to heavy, it's not run and has bug (for sumo coin) { /* Type can be : normal, normalv7, lite, litev7, heavy, ultraheavy */ "cryptonight_type" : "heavy",
/* Intensity 0-> auto intensity, or value from 1-200 */ "intensity" : 44,
/* To use 2 threads per card set double_threads to true */ "double_threads" : true,
Please help me
hi there u must use half intensity heavy using double memory try 22 instead of 44
|
|
|
|
typerc
Newbie
Offline
Activity: 13
Merit: 0
|
 |
April 12, 2018, 09:18:33 PM |
|
Miner 1.3.2 cant't shutdown if crash detected. System also can't reboot in this case. Only reset can help. CPU usage in this case is 99%
Also in version 1.3.2 i can't see which card is crashed.
I am having this same issue. The only thing in the log file shows "watchdog: GPU crash detected, miner will try to restart" and then it hangs with 99% CPU usage. Version 1.3.1 didn't do this. Can you add in the logging which GPU ID crashed to help narrow down hardware issues. Right now I don't see how logging is of any help.
|
|
|
|
Fast_cris
Newbie
Offline
Activity: 185
Merit: 0
|
 |
April 12, 2018, 11:57:08 PM |
|
good work.. thank you
|
|
|
|
tenmoi
Newbie
Offline
Activity: 59
Merit: 0
|
 |
April 13, 2018, 12:18:55 AM |
|
Miner 1.3.2 cant't shutdown if crash detected. System also can't reboot in this case. Only reset can help. CPU usage in this case is 99%
Also in version 1.3.2 i can't see which card is crashed.
I am having this same issue. The only thing in the log file shows "watchdog: GPU crash detected, miner will try to restart" and then it hangs with 99% CPU usage. Version 1.3.1 didn't do this. Can you add in the logging which GPU ID crashed to help narrow down hardware issues. Right now I don't see how logging is of any help. This urgent. My rig crashed after 20 hours. But which gpu?
|
|
|
|
|