Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[l33twannabe]

Hello,

A quick question from me. Currently I'm on GTX970 + Windows 10 v1703 + Claymore 9.6. For mining purposes I'm forced to use Nvidia 347.52 driver. Unfortunately, in order to use my GPU in Adobe Premiere I need newer drivers, so everytime I switch from work to mining, I have to uninstall/install GPU drivers. It's not that big of a problem, but now I would like to add another Nvidia GPU, so that I could use one for work and the other one just for mining at the same time. However, with old Nvidia GPU drivers it won't be possible. Is there any workaround for this issue ?

Thanks !

[rubbbio]

@Claymore, thanks for update but for rx 460 on 9.6 was 13.9 mh/s in exp/dcr dual mode and now it drops to 13.6 mh/s on 9.7 with same -dcri 18. Second coin has raised almost double that`s good.

[Krishi]

This version was well worth the wait!

I've gone from 23.5mh/s to 24.9mh/s for my 1060 3gb.
I'd say the only problem is it's not very consistent. Hash rate fluctuates a lot as low as 24.2 mh/s, don't know if that's normal.

[KGV]

I see Nvidia optimization.
But when you will made Radeon optimization?
Red army a lot more bigger then Green.

[ghostR_ZA]

Great stuff.

GTX 1070's went from 30.16 Mh/s (total of 181 between 6 cards). To 31.17 Mh/s each (total of around 187.5 Mh/s).

[argonaute]

Hi Claymore

Works great here with 7 x 1070 MSI ARMOR X 8G !!!

Power limit is 125W per GPU

Dual mining ETH/SC

with 9_5:
  dcri=55
  ETH= 190Mh/s
  SC=3470 Mh/s

with 9_7:
  dcri=62
  ETH= 198Mh/s
  SC= 4081 Mh/s

Which give +6,19% Gain !!!

smooth and sailing, GPU's temperature equal

[jackbox]

With 9.7 I got better Decred speed on my RX 460 card but overall speed for my GPU system on ETH is much lower and hashrates fluctuate wildly. Have gone back to 9.5.

[Datinhkhach]

HI , How to use Claymore mining eth + pasc same time , and pasc will sent to offline wallet . Can't trust Polo anymore  .

[EtaCarinae]

Yeah what happened with poloniex my account stopped getting coins. Dafuq... 3days ago #angry

[alevlaslo]

ETH forecast https://drive.google.com/open?id=0B8q7wS6bgk1bQmZsRTdaQ0N0Snc

Former come true forecast https://drive.google.com/open?id=0B8q7wS6bgk1bSEhTNGVoZFlYSEU

[strannik951159]

Thanks tried it on my GTX 1070. Up to par with ethminer. speeds now
For dual mining I get quite some ETH hashrate drop for little DCR, so for now dual mining on my gtx 1070 is a no go.

well, dual-mining with gtx1070 still disappointed results ...

It depends on GPU, settings, selected coin, it's price and net diff. For example, for SIA on stock 1070 ccminer shows 1400MH/s. In dual mode in v9.7 I get 650MH/s SIA (so 45% of pure SIA speed) with only 2% ETH lost (about 25.8MH/s instead of 26.4MH/s).
DCR speed is not so good, agreed.

ETH - Total Speed: 119.699 Mh/s, Total Shares: 284, Rejected: 0, Time: 02:46
ETH: GPU0 28.884 Mh/s, GPU1 30.478 Mh/s, GPU2 30.198 Mh/s, GPU3 30.139 Mh/s
 SC - Total Speed: 2992.474 Mh/s, Total Shares: 843, Rejected: 1
 SC: GPU0 722.094 Mh/s, GPU1 761.959 Mh/s, GPU2 754.947 Mh/s, GPU3 753.474 Mh/s

gtx 1070 etc + sia

[tarrier]

nothing changes.....

[phaselinear]

im having a hard time getting up and started on windows 10 64bit pro with nvidia 980ti

im just trying to mine ETH only

when i try to load my bat file i get an error
"ethdcrminer64.exe - entry point not found

the procedure entry point clSetKernelArg could not be located in the dynamic link library"

ive tried on newest nvidia drivers first (384.76), gave me the same error. uninstalled all my video drivers. tried installing the version in the instructions but it wouldnt allow me to install that nvidia driver version. oldest drivers that im able to install is (368.81) but still get the same error

EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal YOUR_WALLET_ADDRESS/YOUR_WORKER/ -epsw x -mode 1 -ftime 10

i did change my wallet address and worker but still not even able to get my cards to post without miners crashing.
is there another step that im missing to allow me to mine directly to my wallet?
so confused by this coin...

[Branko]

On my RX560s I noticed much better speed for secondary coins,
but ETH fluctuates more than before...also had to lower memory
speed, otherwise I get crashes where 9.6 worked stable (but I guess
thats because of more strain on cards due to more work done)

I also noticed that before 9.7 memory controller utilization was around
62-63%, and with 9.7 it went up to 92-93%

[EssentialCoin]

nothing changes.....

Do you use AMD cards?

[_sniper_]

Avast detects IDP.ARES.Generic in latest EthMan while 9.4 was completely OK.

http://imgur.com/a/k6QXV

I tried to download 9.4 from your drive link but google didn't allow as the file is virus infected.

[w0lf0.]

nothing changes to me with 9.7 version

[_sniper_]

nothing changes to me with 9.7 version

For my MSI 1060 with Samsung RAM 9.7 added more than 1Mh/s - 24.5 vs 23.2.

Same cards with Hynix added 0.3 Mh/s, nothing changed for RX580.

[zodiacus]

anybody have mining numbers ETH Solo and ETH + SIA Dual with NVidia GTX 1080 TI on Claymore 9.7?

thanks in advance.

[dt8666]

Thanks tried it on my GTX 1070. Up to par with ethminer. speeds now
For dual mining I get quite some ETH hashrate drop for little DCR, so for now dual mining on my gtx 1070 is a no go.

well, dual-mining with gtx1070 still disappointed results ...

It depends on GPU, settings, selected coin, it's price and net diff. For example, for SIA on stock 1070 ccminer shows 1400MH/s. In dual mode in v9.7 I get 650MH/s SIA (so 45% of pure SIA speed) with only 2% ETH lost (about 25.8MH/s instead of 26.4MH/s).
DCR speed is not so good, agreed.

ETH - Total Speed: 119.699 Mh/s, Total Shares: 284, Rejected: 0, Time: 02:46
ETH: GPU0 28.884 Mh/s, GPU1 30.478 Mh/s, GPU2 30.198 Mh/s, GPU3 30.139 Mh/s
 SC - Total Speed: 2992.474 Mh/s, Total Shares: 843, Rejected: 1
 SC: GPU0 722.094 Mh/s, GPU1 761.959 Mh/s, GPU2 754.947 Mh/s, GPU3 753.474 Mh/s

gtx 1070 etc + sia

I would love to learn you setting mate. Currently 3 Asus Dual GTX1070 @ 8708MHz mem clock 80%TDP. I'm getting poor result on Sia. average 30.4mh/s for eth 350mh/s for sia per card which is not even half of yours. DCRI 35

press + key at the mining window and see which dri is the best that you want.
press once will increase it by 1
i tried mine is with 50+ to get it to 500+ but will see drop in ETH. so it is which balance that you want.

For those very high numbers I believe it setting the tdp to very high number too. so more power driving it