chronek
Sr. Member
  
Offline
Activity: 273
Merit: 250
BD People Are Legend
|
 |
July 19, 2017, 01:39:03 PM |
|
Know anybody what is <ETH current share target> ? Could be difficulty, that sets from the pool? Thank you
Yes, a pool sets a lower difficulty (target) than the network difficulty in order for your miner to easier find shares, even if that share not solve block it validate that you working on sollution. Usual that difficulty is based on the hashrate you report to the pool.
|
|
|
|
sir4o
Newbie
Offline
Activity: 67
Merit: 0
|
 |
July 19, 2017, 01:45:26 PM |
|
when this programer will make an andoid app to allow us monitor our rigs ? also Eth Man when will be able to work through internet ,not only through local lan???
Hello! 1. Allready app from Play Market - Claymore\Optiminer Monitor from BCMob 2. You can get static IP from your ISP and watch your rigs from Internet. 1st thanks for ur replay 2nd : i`m already using this app since few weeks and it have a bug in very important option ( check miners work in the background ) this option when i change it to (on ) and set the time interval to 5 min for example when i leave the app it stop working in the background and when i open it i found this option is (Of) so i have to check manualy Yes, same issue here. Ive contacted with developer, but he couldnt confirm it on his side. So our conversation died quickly. Pitty. check if your phone OS has some sort of process optimizations and then exclude the app from killing cycles
|
|
|
|
sir4o
Newbie
Offline
Activity: 67
Merit: 0
|
 |
July 19, 2017, 01:55:14 PM |
|
I'm running all nvidia, a mix of 1060,1070,1080 on different miners, each miner exhibits the same behavior.
Here's my batch file to start it all up... setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100
You can erase this section : it is only for AMD GPUs. I'm with AMD Rigs and also without these lines 
|
|
|
|
ozzy1926
|
 |
July 19, 2017, 02:06:31 PM |
|
Any evga 1060 ftw or sc user can share their setting ? I can't pass 24.5 Mh/s
I have an 8 card rig of EVGA 06G-P4-6161-KR GeForce GTX 1060 6GB (single fan), since Claymore 9.7 I´m getting a max hash of 25,4mh/s per card (solo eth mining). My settings: Power Limit: 65% Temp Limit: 63 Cº Core Clock: 145 Mhz Memory Clock: 1000 Mhz Fan: 90% This whole rig pulls 700w. Cards temp is between 55ºC - 62ºC. Running stable 11 days now with abnove settings. Hope it helps Thanks for the setting but did you checked the watt meter from wall because I get 720-730 with 7 cards
|
|
|
|
okiagr
Newbie
Offline
Activity: 10
Merit: 0
|
 |
July 19, 2017, 02:46:47 PM |
|
Hello guys, I have GIGABYTE Radeon RX 580 GAMING 8GB
Its def give 21 mhs after flash 26mhs.
can someone help ? i would like got 28-30 mhs.
what I Did:
in flash/Bios 24 Mhs Memory
MHz Mv 300 1000 1000 1000 2000 1000
Mhz | Timing Strap
1750 copy 2000 replace.
in flash/Bios 26 mhs Memory
MHz Mv 300 900 1000 900 2000 900
Mhz | Timing Strap
1750 copy 2000 replace.
any ideas to get 28-30 mhs?
Increase RAM clock to 2200 (or close to that, what is stable for you) Decrease GPU: 1200 MHz Decrease TDP: -10% With bios mod, it should give you 28-29-30 depending on the driver/miner version. (I suggest latest available from both + Creative Update for Windows) You cannot get 29-30 anymore with this card. You are 2 months late. That's because of the hashrate dropping for AMD cards on each epoch. The actual rate now is somewhere 27+. If someone else has better hashrate for this card, please share the bios.
|
|
|
|
yany
Newbie
Offline
Activity: 31
Merit: 0
|
 |
July 19, 2017, 03:00:44 PM |
|
Hello guys, I have GIGABYTE Radeon RX 580 GAMING 8GB
Its def give 21 mhs after flash 26mhs.
can someone help ? i would like got 28-30 mhs.
what I Did:
in flash/Bios 24 Mhs Memory
MHz Mv 300 1000 1000 1000 2000 1000
Mhz | Timing Strap
1750 copy 2000 replace.
in flash/Bios 26 mhs Memory
MHz Mv 300 900 1000 900 2000 900
Mhz | Timing Strap
1750 copy 2000 replace.
any ideas to get 28-30 mhs?
Increase RAM clock to 2200 (or close to that, what is stable for you) Decrease GPU: 1200 MHz Decrease TDP: -10% With bios mod, it should give you 28-29-30 depending on the driver/miner version. (I suggest latest available from both + Creative Update for Windows) You cannot get 29-30 anymore with this card. You are 2 months late. That's because of the hashrate dropping for AMD cards on each epoch. The actual rate now is somewhere 27+. If someone else has better hashrate for this card, please share the bios. Sure, you are right, I forgot the hashrate drop. It was 3 weeks ago, I helped my friend to calibrate the settings. @mzeoatrakeb: I use GTX 1070 cards. (see signature for details)
|
|
|
|
frode88
Newbie
Offline
Activity: 41
Merit: 0
|
 |
July 19, 2017, 03:15:05 PM |
|
Hi. I have one Q. there will be hash drop for GTX 1070? or only hash drop for AMD? thank you.
|
|
|
|
brownfly
|
 |
July 19, 2017, 03:44:47 PM |
|
9.7 gave my 1070 card good boost: from 29 MH/s to 30 MH/s, or from 146 to 151 MH/s at the same OC settings.
Yes, but what is your power consumption ? 100/115 W or 150 W (standard) ? I am also with the 9.7 version of Claymore. update: I have changed OC to -100 for main clock and +700 for RAM clock. power consumption went down to 120W per unit and hashrate is even better: 152 MH/s vs 151 Mh/s before (dual mining, DCR rate is 1,530 MH/s). Hopefully it will be stable enough.
|
|
|
|
vapourminer
Legendary
Offline
Activity: 4788
Merit: 4959
what is this "brake pedal" you speak of?
|
 |
July 19, 2017, 03:58:27 PM Last edit: July 19, 2017, 04:52:41 PM by vapourminer |
|
any ideas to get 28-30 mhs?
Increase RAM clock to 2200 (or close to that, what is stable for you) Decrease GPU: 1200 MHz Decrease TDP: -10% With bios mod, it should give you 28-29-30 depending on the driver/miner version. (I suggest latest available from both + Creative Update for Windows) You cannot get 29-30 anymore with this card. You are 2 months late. That's because of the hashrate dropping for AMD cards on each epoch. The actual rate now is somewhere 27+. If someone else has better hashrate for this card, please share the bios. yes you can. my powercolor 470/4 samsung gets 29.3. just strapped 1750 upward. 1040/2100 clocks. my msi 470/4 with samsung gets 27 with same settings. not sure why the msi is lower. kvm is plugged into the powercolor also this is dual mining sia -dcri 15 setting. each is doing ~400 mhs sia. so all i did is the memory straps, nothing else in the bios was touched except i raised the power limit from 5 to 25 on the powercolor. it is possible the 29.3 mhs rate is an error possibly? however rig is stable for weeks at a time, and that card shows no artifacts when displaying the desktop. EDIT: nevermind, wrong card.
|
|
|
|
mzeoatrakeb
Newbie
Offline
Activity: 25
Merit: 0
|
 |
July 19, 2017, 04:00:55 PM |
|
with samsung pcu its not problem my amd has Hynix pcu...
|
|
|
|
okiagr
Newbie
Offline
Activity: 10
Merit: 0
|
 |
July 19, 2017, 04:12:04 PM |
|
any ideas to get 28-30 mhs?
Increase RAM clock to 2200 (or close to that, what is stable for you) Decrease GPU: 1200 MHz Decrease TDP: -10% With bios mod, it should give you 28-29-30 depending on the driver/miner version. (I suggest latest available from both + Creative Update for Windows) You cannot get 29-30 anymore with this card. You are 2 months late. That's because of the hashrate dropping for AMD cards on each epoch. The actual rate now is somewhere 27+. If someone else has better hashrate for this card, please share the bios. yes you can. my powercolor 470/4 samsung gets 29.3. just strapped 1750 upward. 1040/2100 clocks. my msi 470/4 with samsung gets 27 with same settings. not sure why the msi is lower. kvm is plugged into the powercolor also this is dual mining sia -dcri 15 setting. each is doing ~400 mhs sia. so all i did is the memory straps, nothing else in the bios was touched except i raised the power limit from 5 to 25 on the powercolor. it is possible the 29.3 mhs rate is an error possibly? however rig is stable for weeks at a time, and that card shows no artifacts when displaying the desktop. He was talking about rx 580 Gigabyte with Hynix memory.
|
|
|
|
mzeoatrakeb
Newbie
Offline
Activity: 25
Merit: 0
|
 |
July 19, 2017, 04:15:53 PM |
|
can you share his bios?
|
|
|
|
br2459
|
 |
July 19, 2017, 04:17:53 PM |
|
Hello all,
I am running a rig mix with 1 GTX 1070, 1 R9 380 and 1 RX480. I am using 16.9.2 since 480 is modded but for some reason I can't OC with AB nor does it show temps. in AB it just shows blank. Anyone else using a mixed rig and having this issue? I know what most of you will say, don't mix but this isn't exactly a permanent situation. I just had cards sitting around doing nothing so I wanted to at least get something out of them. Granted I am only losing about 5MH/s but that does add up until my hardware gets here next week.
|
|
|
|
vapourminer
Legendary
Offline
Activity: 4788
Merit: 4959
what is this "brake pedal" you speak of?
|
 |
July 19, 2017, 04:52:02 PM |
|
He was talking about rx 580 Gigabyte with Hynix memory.
oh. derp. nevermind 
|
|
|
|
lance04
|
 |
July 19, 2017, 05:17:46 PM |
|
hmm i Running Claymore's miner for 8 hours on 4x R9 380 (non X) rig, the hash rate on miner shows 80 Mhash/sec, but on the pool (Etehrmine.org) it dropped from 75 Mhash down to 45 Mhash. I switched back to qtminer for a few hours and my pool hash rate returned to normal, so I rebooted the rig and tried the Claymore miner again and within a hour I seen the hash rate going down again. For now I switched back to qtminer.
|
|
|
|
mrdunns
Newbie
Offline
Activity: 33
Merit: 0
|
 |
July 19, 2017, 05:20:50 PM |
|
When setting this up where do you send the secondary coin your mining.
|
|
|
|
scryptr
Legendary
Offline
Activity: 1798
Merit: 1028
|
 |
July 19, 2017, 06:37:21 PM |
|
When setting this up where do you send the secondary coin your mining.
USE A WALLET ADDRESS THAT YOU OWN-- Use the "-dwal" command to send the coins to an address that you own and control. And, please read the "Readme!!!.txt" file before you start mining. It may take a couple read-throughs to understand how to set up Claymore's miner. There are several examples in the readme, and on the Opening Page (OP) of this thread. --scryptr
|
|
|
|
Socket54
|
 |
July 19, 2017, 07:00:10 PM Last edit: July 19, 2017, 08:48:38 PM by Socket54 |
|
I am having a bit of trouble starting this miner up. I am getting this error and not sure why so any help would be greatly appreciated: {"jsonrpc":"2.0","result":["0x00218ea06007476976060d6981fc54b9d59970fc80936077f4c44286afa29512","0x68fc811a18084465eab2e58f91e5dff9010c0bf8dbbf1dc799e61e23ab9cc904","0x00000000ffb34c02420e9948eacd78cf33b059a88ade1ff0614f7f3c303cf3a7"]} I get a similar if not exact error with job timeouts etc etc whether i try dual mining or solo mining ETH only. Here is a snip of the log file if that will help. 15:03:29:498 1728 args: -epool eth.suprnova.cc:5005 -ewal BlueBills.BlueBills1 -epsw x -esm 3 -dpool dcr.suprnova.cc:3252 -dwal BlueBills.BlueBills -dpsw x -allpools 1 15:03:29:498 1728 15:03:29:499 1728 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» 15:03:29:499 1728 º Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.7 º 15:03:29:500 1728 ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ 15:03:29:500 1728 15:03:29:701 1728 ETH: 1 pool is specified 15:03:29:701 1728 Main Ethereum pool is eth.suprnova.cc:5005 15:03:29:702 1728 DCR: 1 pool is specified 15:03:29:702 1728 Main Decred pool is dcr.suprnova.cc:3252 15:03:29:963 1728 OpenCL platform: AMD Accelerated Parallel Processing 15:03:30:017 1728 OpenCL platform: NVIDIA CUDA 15:03:30:018 1728 OpenCL platform: AMD Accelerated Parallel Processing 15:03:30:019 1728 OpenCL initializing...
15:03:30:020 1728 AMD Cards available: 1 15:03:30:020 1728 GPU #0: Ellesmere, 8192 MB available, 36 compute units 15:03:30:020 1728 GPU #0 recognized as Radeon RX 480/580 15:03:30:020 1728 POOL/SOLO version 15:03:30:021 1728 b370 15:03:30:021 1728 Platform: Windows 15:03:30:068 1728 start building OpenCL program for GPU 0... 15:03:30:441 1728 done 15:03:30:685 1728 GPU #0: algorithm ASM 15:03:31:116 1728 CUDA initializing...
15:03:31:117 1728 NVIDIA Cards available: 1 15:03:31:117 1728 CUDA Driver Version/Runtime Version: 8.0/8.0 15:03:31:118 1728 GPU #1: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1
15:03:31:119 1728 Total cards: 2 15:03:34:761 1728 NVML version: 8.382.53 15:03:35:020 25fc ETH: Stratum - connecting to 'eth.suprnova.cc' <149.202.76.194> port 5005 15:03:35:109 1728 DUAL MINING MODE ENABLED: ETHEREUM+DECRED
15:03:35:110 1728 ETH: nicehash stratum mode 15:03:35:110 ba4 DCR: Stratum - connecting to 'dcr.suprnova.cc' <217.182.138.167> port 3252 15:03:35:112 1728 "-allpools" option is set, default pools can be used for devfee, check "Readme" file for details. 15:03:35:113 1728 Watchdog enabled 15:03:35:114 1728 Remote management (READ-ONLY MODE) is enabled on port 3333 15:03:35:115 1728
15:03:35:180 25fc send: {"id": 1, "method": "mining.subscribe", "params": ["MinerName/1.0.0", "EthereumStratum/1.0.0"]}
15:03:35:181 25fc send: {"id": 5, "method": "mining.extranonce.subscribe", "params": []}
15:03:35:182 25fc send: {"id": 2, "method": "mining.authorize", "params": ["BlueBills.BlueBills1","x"]}
15:03:35:183 25fc ETH: Stratum - Connected (eth.suprnova.cc:5005) 15:03:35:259 ba4 send: {"id": 1, "method": "mining.subscribe", "params": ["dual 1.0"]}
15:03:35:260 ba4 send: {"id": 5, "method": "mining.extranonce.subscribe", "params": []}
15:03:35:260 ba4 send: {"id": 2, "method": "mining.authorize", "params": ["BlueBills.BlueBills","x"]}
15:03:35:262 ba4 DCR: Stratum - Connected (dcr.suprnova.cc:3252) 15:03:35:412 ba4 got 579 bytes 15:03:35:412 ba4 buf: {"id":1,"result":[[["mining.notify","deadbeefcafebabeff6a050000000000"]],"c6d4e2a0d9c5c05b1cf7a8f4",12],"error":null} {"id":null,"method":"mining.set_difficulty","params":[16]} {"id":null,"method":"mining.notify","params":["acaf","675377d715c8c41ee291f144525950542e53a80b899fce9a0000003500000000","c846cc7e26b0f67e268062ddb8875356ec6c7f47e1ebaf3cc442e2469e2d8c16a62916f53231e3d21ea621f4bbcd0cf892fd1441003c6f1126c01ab379fb6c8d0100fdb6e54644c905001400569d00006253011a6d0a1a5901000000c2520200e53300000fbb6f590000000000000000","04000000",[],"04000000","1a015362","596fbb0f",false]}
15:03:35:412 ba4 parse packet: 117 15:03:35:413 ba4 remove first packet 461 15:03:35:414 ba4 new buf size: 461 15:03:35:415 ba4 parse packet: 58 15:03:35:415 ba4 remove first packet 402 15:03:35:416 ba4 new buf size: 402 15:03:35:417 ba4 parse packet: 401 15:03:35:418 ba4 new buf size: 0 15:03:35:553 ba4 got 36 bytes 15:03:35:590 ba4 buf: {"id":2,"result":true,"error":null}
15:03:35:591 ba4 parse packet: 35 15:03:35:592 ba4 DCR: Authorized 15:03:35:593 ba4 new buf size: 0 15:03:38:462 25fc checkread timeout 15:03:41:682 25fc checkread timeout 15:03:44:926 25fc checkread timeout 15:03:48:168 25fc checkread timeout 15:03:49:844 25fc got 236 bytes 15:03:49:845 25fc buf: {"jsonrpc":"2.0","result":["0x17febd0e80ef67c973a69fccb72f2830b87d56f6241cc8c889bf7591b45bceb5","0x68fc811a18084465eab2e58f91e5dff9010c0bf8dbbf1dc799e61e23ab9cc904","0x00000000ffb34c02420e9948eacd78cf33b059a88ade1ff0614f7f3c303cf3a7"]}
15:03:49:846 25fc parse packet: 235 15:03:49:847 25fc Received unknown response: {"jsonrpc":"2.0","result":["0x17febd0e80ef67c973a69fccb72f2830b87d56f6241cc8c889bf7591b45bceb5","0x68fc811a18084465eab2e58f91e5dff9010c0bf8dbbf1dc799e61e23ab9cc904","0x00000000ffb34c02420e9948eacd78cf33b059a88ade1ff0614f7f3c303cf3a7"]}
15:03:49:848 25fc new buf size: 0 15:03:52:666 ba4 got 401 bytes 15:03:52:666 ba4 buf: {"id":null,"method":"mining.notify","params":["acb0","675377d715c8c41ee291f144525950542e53a80b899fce9a0000003500000000","d03938bd5a2167877421ed8c6c714d8fa398175698f25545e8c38e694d7a96598477890ac4e74a93bef2d093dcd29d71e15bee23fa08682b745482d2512711a70100fdb6e54644c905001400569d00006253011a6d0a1a5901000000c2520200bd3400002abb6f590000000000000000","04000000",[],"04000000","1a015362","596fbb2a",true]}
15:03:52:666 ba4 parse packet: 400 15:03:52:666 ba4 new buf size: 0 15:03:52:667 ba4 DCR: 07/19/17-15:03:52 - New job from dcr.suprnova.cc:3252 15:03:52:667 ba4 target: 0x000000000ffff000 (diff: 68GH), block #152258 15:03:53:009 25fc got 236 bytes 15:03:53:009 25fc buf: {"jsonrpc":"2.0","result":["0x28170338f2097f310478ce5b93ae6b19eb3796c1a5c166c3af195db1253af2fc","0x68fc811a18084465eab2e58f91e5dff9010c0bf8dbbf1dc799e61e23ab9cc904","0x00000000ffb34c02420e9948eacd78cf33b059a88ade1ff0614f7f3c303cf3a7"]}
15:03:53:009 25fc parse packet: 235 15:03:53:010 25fc Received unknown response: {"jsonrpc":"2.0","result":["0x28170338f2097f310478ce5b93ae6b19eb3796c1a5c166c3af195db1253af2fc","0x68fc811a18084465eab2e58f91e5dff9010c0bf8dbbf1dc799e61e23ab9cc904","0x00000000ffb34c02420e9948eacd78cf33b059a88ade1ff0614f7f3c303cf3a7"]}
15:03:53:010 25fc new buf size: 0
|
Laugh Smile and Love
|
|
|
barismanco
Newbie
Offline
Activity: 3
Merit: 0
|
 |
July 19, 2017, 08:42:53 PM |
|
Hi,
I started to use this dual miner. I want to mine ETH+SC.
When I start the .bat file, mining begins and a few seconds later, the display turns off and newer turns back on. The computer freezes. I had to restart the computer.
Operating system: Windows 10 Graphic card: Sapphire RX570 Pulse 4GB Driver version: 17.4.4 (I have also tried the other versions)
I didn't understand what happens.
Can anyone help me?
Thank you all.
|
|
|
|
P00P135
|
 |
July 19, 2017, 09:02:33 PM |
|
Hi,
I started to use this dual miner. I want to mine ETH+SC.
When I start the .bat file, mining begins and a few seconds later, the display turns off and newer turns back on. The computer freezes. I had to restart the computer.
Operating system: Windows 10 Graphic card: Sapphire RX570 Pulse 4GB Driver version: 17.4.4 (I have also tried the other versions)
I didn't understand what happens.
Can anyone help me?
Thank you all.
Have you OC'd the card or modded the Bios? Could just be an unstable overclock or maybe not enough power from your power supply.
|
|
|
|
|