Stack
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 05, 2013, 05:12:16 AM |
|
Hi guys, I keep seeing references for a schematic and to friedcats user guide. It would seem my reseller couldn't be arsed placing them with the miners so I'm trying to find them through these threads. Did not see it in Friedcats latest thread started early sept. If anyone has a link it would be greatly appreciated.
cheers
![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi44.tinypic.com%2F2iicpac.jpg&t=665&c=boGcmV2ai8RqaQ) That what you were after? Source: https://bitcointalk.org/index.php?topic=270981.0
|
|
|
|
Stack
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 05, 2013, 09:05:23 AM |
|
Ok, noobish question here. I have the latest (old blade) revision and for some reason when I connect it, All i hear are a few 'clicks' and then nothing.
Silly question: Did you perhaps forget to plug in the red fuse ? The newest (old) blades have no red fuse? or did mine just really freaking ship without one.. Actually, I didn't get a Green connector either.. Did my blade arrive incomplete? Ok... So my symptom is the same as this... except that I do have a red fuse, it is unbroken, and is inserted... Yet same problem.. I don't get any ethernet lights on my switch, the blade doesn't appear to be doing anything, even though it sounds like it might be starting up. Those clicks mentioned plus a slight hum of a capacitor Please help? :/
|
|
|
|
Pinwheel
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 05, 2013, 04:52:54 PM |
|
Ok, noobish question here. I have the latest (old blade) revision and for some reason when I connect it, All i hear are a few 'clicks' and then nothing.
Silly question: Did you perhaps forget to plug in the red fuse ? The newest (old) blades have no red fuse? or did mine just really freaking ship without one.. Actually, I didn't get a Green connector either.. Did my blade arrive incomplete? Ok... So my symptom is the same as this... except that I do have a red fuse, it is unbroken, and is inserted... Yet same problem.. I don't get any ethernet lights on my switch, the blade doesn't appear to be doing anything, even though it sounds like it might be starting up. Those clicks mentioned plus a slight hum of a capacitor Please help? :/ to provide stable power supply you must have 2 mm thick wire inserted into green connector on board. Loose connection can be a problem. Other reason, your LAN cable not connected properly. In this case blade is running but you will not see any light on network module. That can be due to LAN cable not attached properly or faulty cable, or because network module not incepted firmly into connector. Connect fan to connectors on board, and try again, if fan is running it is network problem. If fan is not running check your power supply and wires.
|
Tom Waits: We should just start as soon as possible cause we might catch a rabbit before we have our pants on. (Juxtapoz)
|
|
|
svojoe
Legendary
Offline
Activity: 968
Merit: 1000
einc.io
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 06, 2013, 05:05:50 AM |
|
Repost from another thread I don't think anyone checks!
Hey there, I got a few blades yesterday and I have read this entire thread, which has some amazing info! But I am still having trouble! This is what I got with 2 blades last night:
2 Generic PSU's papercliped. 17amp+ 12v. 2 individual molex strands cut and fed to blade. (2-4 yellows, 4-6 blacks) Direct from PSU Blades configured properly for Deepbit and EclipseMC For testing one blade is at 1.195 Volts The other is at stock 1.05V Both Blades on LOW, With: Chip: OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO Blades being cooled with a insanely strong blower blowing through them long-ways. (at least several hundred CFM, they are only warm to the touch)
Blades basically won't work on DeepBit no matter what I try. Every once in a while they send a few shares.
On EclipseMC the blades show between 1-8Ghash on the Eclipse control panel on the site. When I compare the shares against a 5.6ghash Jalepeno they seem to be doing more work, but not that much more. This is what the config page looks like: Total MHS: 00000 Received: 0000000215 Accepted: 0000000000 Per Minute: 000.00 Efficiency: 000.00% Up Time: 0d,00h,01m,41s
They seem to be restarting almost exactly every 2 minutes and 15 seconds, weird right?
I don't think its a power issue, I am NOT using the proxy (the links are down and I'm not sure they are useful for other pools?)
What am I doing wrong, is it a network issue with get-work? They have been running like this for 8 hours now with same results. Any ideas?
*****UPDATE******
I have tried the proxy now, it does not seem to connect to deepbit, but it does to EclipseMC, However once I connected the blade it went to xxxxxxxOxxxOxxxxxx And also did not mine. I left this for over ten minutes, and have put it back to the way it was. Now it is mining at the 4-7gh's the rest seem too be. What am I doing wrong?
|
|
|
|
atmclikk
Newbie
Offline
Activity: 30
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 06, 2013, 05:52:19 AM |
|
Does anyone know where I can download the precompiled Windows Stratum proxy at? The link from Slush's pool has been broken for a few days....-
|
|
|
|
svojoe
Legendary
Offline
Activity: 968
Merit: 1000
einc.io
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 06, 2013, 06:18:32 AM |
|
Does anyone know where I can download the precompiled Windows Stratum proxy at? The link from Slush's pool has been broken for a few days....-
A cool dude passed this to me earlier: http://btc.anapaapps.com/mining_proxy.php
|
|
|
|
Trongersoll
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 06, 2013, 10:07:21 AM |
|
Does anyone know where I can download the precompiled Windows Stratum proxy at? The link from Slush's pool has been broken for a few days....-
A cool dude passed this to me earlier: http://btc.anapaapps.com/mining_proxy.phpThis link does an automatic download.
|
|
|
|
atmclikk
Newbie
Offline
Activity: 30
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 06, 2013, 02:54:24 PM |
|
Does anyone know where I can download the precompiled Windows Stratum proxy at? The link from Slush's pool has been broken for a few days....-
A cool dude passed this to me earlier: http://btc.anapaapps.com/mining_proxy.phpThis link does an automatic download. Thanks!!!
|
|
|
|
svojoe
Legendary
Offline
Activity: 968
Merit: 1000
einc.io
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 06, 2013, 03:45:17 PM |
|
Now I am trying a much stronger PSU on a different blade, When set to port 3333 for Eclipse (not sure where I got it) the proxy scrolls so fast I can't make out what it is doing, but the miner does not hash and the pool shows no work. hhmmm ![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
|
|
|
|
dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 06, 2013, 04:02:14 PM |
|
Now I am trying a much stronger PSU on a different blade, When set to port 3333 for Eclipse (not sure where I got it) the proxy scrolls so fast I can't make out what it is doing, but the miner does not hash and the pool shows no work. hhmmm ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Sounds like login/pool info is wrong.
|
|
|
|
svojoe
Legendary
Offline
Activity: 968
Merit: 1000
einc.io
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 06, 2013, 06:09:39 PM |
|
Now I am trying a much stronger PSU on a different blade, When set to port 3333 for Eclipse (not sure where I got it) the proxy scrolls so fast I can't make out what it is doing, but the miner does not hash and the pool shows no work. hhmmm ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Sounds like login/pool info is wrong. I agree, but I just can't find squat for info on this. I've tried a hundred combinations now and nothing seems to work. There is only a few variables here so I'm not sure how I am messing it up. -o us2.eclipsemc.com -p 3333 (or 8337, or 8332) On config page, ports = Same as pool? serveraddress = localhost (with or without the ports?!) userpass = pool user and pass this seems simple, but obviously because I am showing no hashrate, there is a pool-connection glitch or something I assume. I just averaged the performance of the last several hours, and they are only averaging 5ghash on the pool. Why would they restart every 2 minutes if it was pool problems though? Me = confused...
|
|
|
|
west17m
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 61
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 06, 2013, 06:45:00 PM |
|
Now I am trying a much stronger PSU on a different blade, When set to port 3333 for Eclipse (not sure where I got it) the proxy scrolls so fast I can't make out what it is doing, but the miner does not hash and the pool shows no work. hhmmm ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Sounds like login/pool info is wrong. I agree, but I just can't find squat for info on this. I've tried a hundred combinations now and nothing seems to work. There is only a few variables here so I'm not sure how I am messing it up. -o us2.eclipsemc.com -p 3333 (or 8337, or 8332) On config page, ports = Same as pool? serveraddress = localhost (with or without the ports?!) userpass = pool user and pass this seems simple, but obviously because I am showing no hashrate, there is a pool-connection glitch or something I assume. I just averaged the performance of the last several hours, and they are only averaging 5ghash on the pool. Why would they restart every 2 minutes if it was pool problems though? Me = confused... My blades worked fine with eclipsemc but I had to set up a stratum proxy and go through that.
|
|
|
|
svojoe
Legendary
Offline
Activity: 968
Merit: 1000
einc.io
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 06, 2013, 06:50:45 PM |
|
Now I am trying a much stronger PSU on a different blade, When set to port 3333 for Eclipse (not sure where I got it) the proxy scrolls so fast I can't make out what it is doing, but the miner does not hash and the pool shows no work. hhmmm ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Sounds like login/pool info is wrong. I agree, but I just can't find squat for info on this. I've tried a hundred combinations now and nothing seems to work. There is only a few variables here so I'm not sure how I am messing it up. -o us2.eclipsemc.com -p 3333 (or 8337, or 8332) On config page, ports = Same as pool? serveraddress = localhost (with or without the ports?!) userpass = pool user and pass this seems simple, but obviously because I am showing no hashrate, there is a pool-connection glitch or something I assume. I just averaged the performance of the last several hours, and they are only averaging 5ghash on the pool. Why would they restart every 2 minutes if it was pool problems though? Me = confused... My blades worked fine with eclipsemc but I had to set up a stratum proxy and go through that. What strings did you use? I've tried so many combinations I'm not sure what I'm missing at this point.
|
|
|
|
brogramer
Newbie
Offline
Activity: 15
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 07, 2013, 02:13:25 PM |
|
Hey guys, I've been absolutely pulling my hair out with my blade. I can get it to connect every now as if by effing magic but generally it hangs on the initial hit of my stratum proxy and then the blade sends an ack/reset tcp packet on every one of it's ports.... and then resets cuz it hasn't hashed in two minutes...
Has anyone else seen this issue? Is it just a faulty ethernet plug? Is there anything I can do?
- the power is right. The voltage is tuned. It's worked for at least a day before. I've gone through this whole thread but no one has really asked a question like mine... (maybe no one else wiresharked their stuff? I have the packet capture if anyone wants it..)
I've tried many different versions of the stratum proxy and on windows / osx. No dice :/.
|
|
|
|
svojoe
Legendary
Offline
Activity: 968
Merit: 1000
einc.io
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 07, 2013, 04:01:00 PM |
|
Hey guys, I've been absolutely pulling my hair out with my blade. I can get it to connect every now as if by effing magic but generally it hangs on the initial hit of my stratum proxy and then the blade sends an ack/reset tcp packet on every one of it's ports.... and then resets cuz it hasn't hashed in two minutes...
Has anyone else seen this issue? Is it just a faulty ethernet plug? Is there anything I can do?
- the power is right. The voltage is tuned. It's worked for at least a day before. I've gone through this whole thread but no one has really asked a question like mine... (maybe no one else wiresharked their stuff? I have the packet capture if anyone wants it..)
I've tried many different versions of the stratum proxy and on windows / osx. No dice :/.
I'm having similar problems, Mine are hashing while connected directly to the pools, but only about half the speed, and they still reset every 2 minutes. The config pages show zero hashrate, only received shares, which get up to about 300 before it restarts. I've tried the proxy on several pools and I still can't figure it out also.
|
|
|
|
aleph
Newbie
Offline
Activity: 10
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/question.gif) |
September 07, 2013, 08:53:07 PM |
|
Does anyone have a link to a compiled Windows mining_proxy.exe file? Slush's link is down. Thanks in advance.
|
|
|
|
Unacceptable
Legendary
Offline
Activity: 2212
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 07, 2013, 09:05:17 PM |
|
Now I am trying a much stronger PSU on a different blade, When set to port 3333 for Eclipse (not sure where I got it) the proxy scrolls so fast I can't make out what it is doing, but the miner does not hash and the pool shows no work. hhmmm ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Sounds like login/pool info is wrong. I agree, but I just can't find squat for info on this. I've tried a hundred combinations now and nothing seems to work. There is only a few variables here so I'm not sure how I am messing it up. -o us2.eclipsemc.com -p 3333 (or 8337, or 8332) On config page, ports = Same as pool? serveraddress = localhost (with or without the ports?!) userpass = pool user and pass this seems simple, but obviously because I am showing no hashrate, there is a pool-connection glitch or something I assume. I just averaged the performance of the last several hours, and they are only averaging 5ghash on the pool. Why would they restart every 2 minutes if it was pool problems though? Me = confused... I think I see something: -o http://us2.eclipsemc.com:3333 -u Username -p pass p is password not port,correct ![Huh](https://bitcointalk.org/Smileys/default/huh.gif)
|
"If you run into an asshole in the morning, you ran into an asshole. If you run into assholes all day long, you are the asshole." -Raylan Givens Got GOXXED ?? https://www.youtube.com/watch?v=9KiqRpPiJAU&feature=youtu.be"An ASIC being late is perfectly normal, predictable, and legal..."Hashfast & BFL slogan ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
bcp19
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 07, 2013, 09:08:43 PM |
|
Now I am trying a much stronger PSU on a different blade, When set to port 3333 for Eclipse (not sure where I got it) the proxy scrolls so fast I can't make out what it is doing, but the miner does not hash and the pool shows no work. hhmmm ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Sounds like login/pool info is wrong. I agree, but I just can't find squat for info on this. I've tried a hundred combinations now and nothing seems to work. There is only a few variables here so I'm not sure how I am messing it up. -o us2.eclipsemc.com -p 3333 (or 8337, or 8332) On config page, ports = Same as pool? serveraddress = localhost (with or without the ports?!) userpass = pool user and pass this seems simple, but obviously because I am showing no hashrate, there is a pool-connection glitch or something I assume. I just averaged the performance of the last several hours, and they are only averaging 5ghash on the pool. Why would they restart every 2 minutes if it was pool problems though? Me = confused... I think I see something: -o http://us2.eclipsemc.com:3333 -u Username -p pass p is password not port,correct ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) correct
|
I do not suffer fools gladly... "Captain! We're surrounded!" I embrace my inner Kool-Aid.
|
|
|
svojoe
Legendary
Offline
Activity: 968
Merit: 1000
einc.io
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 08, 2013, 12:46:35 AM Last edit: September 08, 2013, 01:08:42 AM by svojoe |
|
On config page, ports = Same as pool? serveraddress = localhost (with or without the ports?!) userpass = pool user and pass
this seems simple, but obviously because I am showing no hashrate, there is a pool-connection glitch or something I assume. I just averaged the performance of the last several hours, and they are only averaging 5ghash on the pool. Why would they restart every 2 minutes if it was pool problems though?
Me = confused...
I think I see something: -o http://us2.eclipsemc.com:3333 -u Username -p pass p is password not port,correct ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) correct [/quote] Um... proxy.exe error: argument -p/--port: invalid int value 'password' Doh, I might have it! its -cu and -cp And... It still doesn't work. hmmm. port 3333, just never fully connects and no port, it scrolls crazy fast. I'm getting a "transport exception" and a ERROR proxy Client_service on timeout.
|
|
|
|
dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 08, 2013, 01:10:27 AM |
|
Use ctrl+s to stop it scrolling, same to resume and see what it says.
|
|
|
|
|