jjiimm_64
Legendary
Offline
Activity: 1876
Merit: 1000
|
|
January 14, 2012, 01:34:39 AM |
|
couple of comments..
1. take them off crossfire if you can 2. back the clocks off a little bit. (I run 6870's at 940, only that high because that is stock) 3. I dont see any accepted shares, only HW (isn't that hardware failures? 4. 83 seems like a high temp 5. 100% fan? how long do you plan on that fan working?
I don't run anything over 930 engine core, you can get a higher hash rate, fut for how long? and how stable?
|
1jimbitm6hAKTjKX4qurCNQubbnk2YsFw
|
|
|
DeathAndTaxes
Donator
Legendary
Offline
Activity: 1218
Merit: 1079
Gerald Davis
|
|
January 14, 2012, 01:50:41 AM Last edit: January 14, 2012, 02:45:10 AM by DeathAndTaxes |
|
3. I dont see any accepted shares, only HW (isn't that hardware failures? 4. 83 seems like a high temp 5. 100% fan? how long do you plan on that fan working?
Yeah he is killing that card. U:0.00/m You produced absolutely no value for the entire time you were mining. 83C, 100% fan, 100% hardware failure rate. A HW of anything other than 0 should be a massive WARNING WARNING WARNING GPU DESTRUCTION IN PROGRESS!Drop the clocks back to stock, set fan @ 75%. Temps should be in the 50C to 60C. Start from there. Find best intensity (try each for at least 30 min to get a good average). Drop memclock down and then start overclocking slow.
|
|
|
|
-ck (OP)
Legendary
Offline
Activity: 4284
Merit: 1645
Ruu \o/
|
|
January 14, 2012, 02:41:39 AM |
|
HW is hardware errors. Your card is producing nothing but garbage and not a single share so you're pushing them too hard.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
Fiyasko
Legendary
Offline
Activity: 1428
Merit: 1001
Okey Dokey Lokey
|
|
January 14, 2012, 02:44:52 AM Last edit: January 14, 2012, 02:59:53 AM by JackRabiit |
|
couple of comments..
1. take them off crossfire if you can 2. back the clocks off a little bit. (I run 6870's at 940, only that high because that is stock) 3. I dont see any accepted shares, only HW (isn't that hardware failures? 4. 83 seems like a high temp 5. 100% fan? how long do you plan on that fan working?
I don't run anything over 930 engine core, you can get a higher hash rate, fut for how long? and how stable?
1. gaming 2. they are stable at 1015core 3. LOL yeah.. Thats screwy i didnt notice that, Heres a better example, Thanks for pointing that out. 4. Yeaaahhhh it is... 5. Well. It's usually not at 100%, CGminer's been the first miner to raise my temps, The card has two fans, And a fan Atop of it pulling the heat out, Overnight, It drops to 80% Heres a new line of what im getting (lol) since i blatently failed last time cgminer version 2.1.2 - Started: [2012-01-13 18:37:07] -------------------------------------------------------------------------------- (5s):634.2 (avg):632.2 Mh/s | Q:113 A:106 R:0 HW:0 E:94% U:8.52/m TQ: 1 ST: 1 SS: 0 DW: 0 NB: 1 LW: 0 GF: 0 RF: 0 Connected to http://pit.deepbit.net:8332 with LP as user ************* Block: 000004bffbab40b456b696ab01b35521... Started: [18:37:07] -------------------------------------------------------------------------------- [P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit GPU 0: 83.0C 100% | 317.2/315.9Mh/s | A:56 R:0 HW:0 U: 4.50/m I: 3 GPU 1: 80.0C 98% | 317.5/316.9Mh/s | A:50 R:0 HW:0 U: 4.02/m I: 3 --------------------------------------------------------------------------------
[2012-01-13 18:48:21] Accepted 00000000.fe653916.f311515d GPU 1 thread 3 [2012-01-13 18:48:44] Accepted 00000000.0bb0dcde.011fc6b5 GPU 1 thread 1 [2012-01-13 18:48:53] Accepted 00000000.e9ee5129.fc2e4fa1 GPU 0 thread 2 [2012-01-13 18:48:54] Accepted 00000000.24c13e33.6b273e3e GPU 0 thread 0 [2012-01-13 18:49:04] Accepted 00000000.8b072a29.c9074be6 GPU 0 thread 0 [2012-01-13 18:49:05] Accepted 00000000.0ef976ef.4aa64a0b GPU 1 thread 3 [2012-01-13 18:49:12] Accepted 00000000.62474031.80218b4f GPU 0 thread 0 [2012-01-13 18:49:16] Accepted 00000000.e7bb8d12.ad5f7181 GPU 1 thread 3 [2012-01-13 18:49:22] Accepted 00000000.d00eef91.5ea25a64 GPU 1 thread 1 [2012-01-13 18:49:24] Accepted 00000000.d970a4e3.19742876 GPU 0 thread 2 [2012-01-13 18:49:35] Accepted 00000000.f838815a.95ffee8c GPU 1 thread 1 [2012-01-13 18:49:35] Accepted 00000000.4dad1c63.87a47724 GPU 1 thread 3
|
|
|
|
Fiyasko
Legendary
Offline
Activity: 1428
Merit: 1001
Okey Dokey Lokey
|
|
January 14, 2012, 02:46:24 AM |
|
HW is hardware errors. Your card is producing nothing but garbage and not a single share so you're pushing them too hard.
XD yeah, I was failing when i posted that... Ima delete that old one.. Just for the record. (and lol shame on me for this) i accedentally set the core and mem in viseversa, While at the same time, I wanted to see how much "lag" i got when running a game with CGminer at i3. So.. 450core 1000mem. LOL=Epic lag on everything, And i thought it was just the miner, the crashing? Yeah, Lol t'was also due to my failure of the clocks+bench+mine
|
|
|
|
Fiyasko
Legendary
Offline
Activity: 1428
Merit: 1001
Okey Dokey Lokey
|
|
January 14, 2012, 02:57:06 AM |
|
Oh hey two things; 1, anytime i try to save a .conf file, It saves, Looks all good to go, But always goes "failed to load json configuration file<--or something simmilar
2, I've heard that you can put the .dll's from older SDK's somewhere in/near the CGminer folder, And then CGminer will use them, AKA 12.1 SDK 2.6 With 12.1 SDK 2.4 performance Where do i put the dlls? (i know wich ones)
|
|
|
|
Remember remember the 5th of November
Legendary
Offline
Activity: 1862
Merit: 1011
Reverse engineer from time to time
|
|
January 14, 2012, 04:03:41 AM |
|
Oh hey two things; 1, anytime i try to save a .conf file, It saves, Looks all good to go, But always goes "failed to load json configuration file<--or something simmilar
2, I've heard that you can put the .dll's from older SDK's somewhere in/near the CGminer folder, And then CGminer will use them, AKA 12.1 SDK 2.6 With 12.1 SDK 2.4 performance Where do i put the dlls? (i know wich ones)
Didn't you just basically answer question 2 yourself?
|
BTC:1AiCRMxgf1ptVQwx6hDuKMu4f7F27QmJC2
|
|
|
Fiyasko
Legendary
Offline
Activity: 1428
Merit: 1001
Okey Dokey Lokey
|
|
January 14, 2012, 04:06:54 AM |
|
Oh hey two things; 1, anytime i try to save a .conf file, It saves, Looks all good to go, But always goes "failed to load json configuration file<--or something simmilar
2, I've heard that you can put the .dll's from older SDK's somewhere in/near the CGminer folder, And then CGminer will use them, AKA 12.1 SDK 2.6 With 12.1 SDK 2.4 performance Where do i put the dlls? (i know wich ones)
Didn't you just basically answer question 2 yourself? Well thats the thing.. Nothing changes when i put the .dll's in the dir... Even after i reboot...
|
|
|
|
jjiimm_64
Legendary
Offline
Activity: 1876
Merit: 1000
|
|
January 14, 2012, 04:08:40 AM |
|
But yeah - state exactly what you want with those 2 commands and once the CPU changes happen I'll put those 2 on first priority (for 5 BTC Kano, thanks. will let you know, trying to get the interface working now. which brings me to this point, i am seeing a discrepancy between the RPC data and the cgminer data regarding LP the app reports that I have 'with LP' but the rpc reports ' [Long Poll] N' web: cgminer version 2.1.2 - Started: [1326505319] Rig: miner4 (5s):? (avg): 2939.46 Mh/s | Q:5791 A:412 R:1 HW:3 E:?% U:2.91/m TQ:? ST:0 SS:? DW:97 NB:10 LW:716 GF:2 RF:0 Connected to http://192.168.1.100:8332 without LP as user ? app: cgminer version 2.1.2 - Started: [2012-01-14 01:42:03] -------------------------------------------------------------------------------- (5s):2929.5 (avg):2938.8 Mh/s | Q:6029 A:428 R:1 HW:3 E:7% U:2.90/m TQ: 9 ST: 13 SS: 0 DW: 104 NB: 11 LW: 726 GF: 2 RF: 0 Connected to http://192.168.1.100:8332 with LP as user ME Block: 00000d67e00edd9eb1d3103a548d5d2c... Started: [04:04:52]
edit: here is the print_r of the rpc call [1] => Array ( [POOL] => 1 [URL] => http://192.168.1.100:8332 [Status] => Alive [Priority] => 0 [Long Poll] => N [Getworks] => 5916 [Accepted] => 0 [Rejected] => 0 [Discarded] => 95 [Stale] => 0 [Get Failures] => 2 [Remote Failures] => 0 )
|
1jimbitm6hAKTjKX4qurCNQubbnk2YsFw
|
|
|
jjiimm_64
Legendary
Offline
Activity: 1876
Merit: 1000
|
|
January 14, 2012, 04:22:09 AM Last edit: January 14, 2012, 11:22:15 PM by jjiimm_64 |
|
But yeah - state exactly what you want with those 2 commands and once the CPU changes happen I'll put those 2 on first priority (for 5 BTC quote myself... Kano, What I am looking for is basically exactly what you would do if you went thru the apps interface to:
1. switch pool P -> S -> pool number
2. change engine clock G -> C -> GPU# -> E -> newValue
3. change mem clock G -> C -> GPU# -> M -> newValue
I guess just about any one of the gpu changes would be good, but the 3 above I think are critical. Even if you can control the fan (I usually have on auto) you can always lower the Eclock down to try and kool it.. or disable the card which you have already implimented.
I would like to revise the above list with this one. 1. ability to switch pools (i think setting a pools priority to 0 would work?) 2. setting any of the following, for 1 or all gpus's: - "intensity" : "newValue",
- "gpu-engine" : "newValue",
- "gpu-memclock" : "newValue",
- "gpu-fan": "newValue", ex(50-85)
I realize the 'all gpus' could get tricky, because most of these takes possible a comma delim list. and i have no idea how it is implimented so just one at a time is good also just wanted to bump this up again. i know we are waiting to resolve the code/trunk issues. here is a sample of the single php page summary of all cgminers in farm no database needed.. http://cgminerweb.com/example.miner.php.html (html snapshot)
|
1jimbitm6hAKTjKX4qurCNQubbnk2YsFw
|
|
|
-ck (OP)
Legendary
Offline
Activity: 4284
Merit: 1645
Ruu \o/
|
|
January 14, 2012, 04:26:40 AM |
|
Oh hey two things; 1, anytime i try to save a .conf file, It saves, Looks all good to go, But always goes "failed to load json configuration file<--or something simmilar
2, I've heard that you can put the .dll's from older SDK's somewhere in/near the CGminer folder, And then CGminer will use them, AKA 12.1 SDK 2.6 With 12.1 SDK 2.4 performance Where do i put the dlls? (i know wich ones)
Try hand editing the conf file. Apparently there is sometimes a problem with the "vddc" entries. I don't know why. You don't copy dlls, you copy any .bin files
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
kano
Legendary
Offline
Activity: 4620
Merit: 1851
Linux since 1997 RedHat 4
|
|
January 14, 2012, 05:12:40 AM |
|
But yeah - state exactly what you want with those 2 commands and once the CPU changes happen I'll put those 2 on first priority (for 5 BTC Kano, thanks. will let you know, trying to get the interface working now. which brings me to this point, i am seeing a discrepancy between the RPC data and the cgminer data regarding LP the app reports that I have 'with LP' but the rpc reports ' [Long Poll] N' That's probably due to having more than one pool? Actually - yes you do have more than one pool (that pool number is '1' not '0') LP is an attribute of a pool. However, the status at the top of cgminer is if ANY pool has LP - cgminer only uses one LP.
|
|
|
|
Fiyasko
Legendary
Offline
Activity: 1428
Merit: 1001
Okey Dokey Lokey
|
|
January 14, 2012, 05:18:26 AM |
|
Oh hey two things; 1, anytime i try to save a .conf file, It saves, Looks all good to go, But always goes "failed to load json configuration file<--or something simmilar
2, I've heard that you can put the .dll's from older SDK's somewhere in/near the CGminer folder, And then CGminer will use them, AKA 12.1 SDK 2.6 With 12.1 SDK 2.4 performance Where do i put the dlls? (i know wich ones)
Try hand editing the conf file. Apparently there is sometimes a problem with the "vddc" entries. I don't know why. You don't copy dlls, you copy any .bin files There are No .bin files in either the enitre 2.5SDK.exe installer, Or in the CGMiner dir. what .bins are you talking about?
|
|
|
|
jjiimm_64
Legendary
Offline
Activity: 1876
Merit: 1000
|
|
January 14, 2012, 05:54:04 AM Last edit: January 14, 2012, 08:15:33 PM by jjiimm_64 |
|
However, the status at the top of cgminer is if ANY pool has LP - cgminer only uses one LP.
So if I am reading you right.. LP is working, because one of the other pools has it, even if my solo server is not actually doing the LP. Thxs. here is a taste of what I am working on.. (trying to keep the original cgminer format that we all know) this is the first time I can actually see what my actual hashrate and util is in real time! this is a single php page plus the included socket example api, no database necessary http://cgminerweb.com/example.miner.php.html
|
1jimbitm6hAKTjKX4qurCNQubbnk2YsFw
|
|
|
Fiyasko
Legendary
Offline
Activity: 1428
Merit: 1001
Okey Dokey Lokey
|
|
January 14, 2012, 07:36:35 AM Last edit: January 14, 2012, 07:27:49 PM by JackRabiit |
|
Crossfire6870's SDK2.6 win7x64 1000core 490mem, Loving this miner Because it compiled a SDK2.5 .bin, Making itself run off SDK 2.5 Whilst i have 2.6 installed cgminer version 2.1.2 - Started: [2012-01-13 23:31:03] -------------------------------------------------------------------------------- (5s):634.8 (avg):637.2 Mh/s | Q:8503 A:6394 R:10 HW:0 E:75% U:8.93/m TQ: 3 ST: 4 SS: 0 DW: 1095 NB: 78 LW: 0 GF: 15 RF: 5 Connected to http://pit.deepbit.net:8332 with LP as user *************** Block: 0000054533fe9192bb1f8a7f5e4506cc... Started: [11:22:57] -------------------------------------------------------------------------------- [P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit GPU 0: 83.0C 98% | 317.0/318.5Mh/s | A:3208 R:6 HW:0 U:4.48/m I: 3 GPU 1: 79.0C 98% | 318.6/318.8Mh/s | A:3186 R:4 HW:0 U:4.45/m I: 3 --------------------------------------------------------------------------------
[2012-01-14 11:25:56] Accepted 00000000.fe087aa6.b6c65b1c GPU 1 thread 1 [2012-01-14 11:25:59] Accepted 00000000.3da5aba9.a4ffc4c4 GPU 0 thread 2 [2012-01-14 11:26:03] Accepted 00000000.23f2c69d.e1247f03 GPU 0 thread 0 [2012-01-14 11:26:08] Accepted 00000000.9b195352.5d02bd13 GPU 1 thread 3 [2012-01-14 11:26:11] Accepted 00000000.98ae433f.4890aa38 GPU 1 thread 3 [2012-01-14 11:26:13] Accepted 00000000.7af8e905.3dc22ee1 GPU 0 thread 2 [2012-01-14 11:26:20] Accepted 00000000.71801391.93aad286 GPU 0 thread 0 [2012-01-14 11:26:26] Accepted 00000000.04eab056.9a04b654 GPU 0 thread 0 [2012-01-14 11:26:30] Accepted 00000000.82d3a872.5a759e46 GPU 0 thread 2 [2012-01-14 11:26:35] Accepted 00000000.ae651790.d9904148 GPU 0 thread 2 [2012-01-14 11:26:35] Accepted 00000000.5589aab8.33646615 GPU 0 thread 0 [2012-01-14 11:26:42] Accepted 00000000.b2f12627.a3f7e617 GPU 1 thread 3
Code updated to a Much larger sample size (ran overnight)
|
|
|
|
jjiimm_64
Legendary
Offline
Activity: 1876
Merit: 1000
|
|
January 14, 2012, 07:40:54 AM |
|
I dont know if anyone else is seeing this. I know this is free/donate software, and normally I would just continue to use the olderversion...... The newest version has lowered my hashrate on the windoz boxes. This one is pretty clear. I dont want to go back to the older version because of the new RPC stuff.. windows 7 64 CCC 12 (latest version) it looks like a reduction of about 30Mhash per gpu. The below rig has 5 6950's, one of them unlocked. The unlocked one normally gets close to 390, and the other 363 cgminer version 2.1.2 - Started: [1326522675] Rig: miner12 (5s):? (avg): 1692.5 Mh/s | Q:781 A:1405 R:8 HW:0 E:?% U:22.63/m TQ:? ST:0 SS:? DW:43 NB:7 LW:2442 GF:1 RF:0 Connected to http://us.eclipsemc.com:8337 with LP as user ? GPU 0: 75.5C 2934RPM 55% | 333.0/332.5Mh/s | 875Mhz 1.1V A:306 R:4 HW:0 U:4.93/m I: 7 GPU 1: 74.0C 3907RPM 73% | 361.9/362.5Mh/s | 875Mhz 1.06V A:308 R:1 HW:0 U:4.96/m I: 7 GPU 2: 75.5C 3830RPM 72% | 332.8/332.5Mh/s | 875Mhz 1.06V A:281 R:1 HW:0 U:4.53/m I: 7 GPU 3: 73.0C 4168RPM 77% | 333.9/332.6Mh/s | 875Mhz 1.1V A:268 R:1 HW:0 U:4.32/m I: 7 GPU 4: 73.5C 3028RPM 58% | 334.3/332.5Mh/s | 875Mhz 1.1V A:242 R:1 HW:0 U:3.90/m I: 7
|
1jimbitm6hAKTjKX4qurCNQubbnk2YsFw
|
|
|
Fiyasko
Legendary
Offline
Activity: 1428
Merit: 1001
Okey Dokey Lokey
|
|
January 14, 2012, 08:15:49 AM |
|
I dont know if anyone else is seeing this. I know this is free/donate software, and normally I would just continue to use the olderversion...... The newest version has lowered my hashrate on the windoz boxes. This one is pretty clear. I dont want to go back to the older version because of the new RPC stuff.. windows 7 64 CCC 12 (latest version) it looks like a reduction of about 30Mhash per gpu. The below rig has 5 6950's, one of them unlocked. The unlocked one normally gets close to 390, and the other 363 cgminer version 2.1.2 - Started: [1326522675] Rig: miner12 (5s):? (avg): 1692.5 Mh/s | Q:781 A:1405 R:8 HW:0 E:?% U:22.63/m TQ:? ST:0 SS:? DW:43 NB:7 LW:2442 GF:1 RF:0 Connected to http://us.eclipsemc.com:8337 with LP as user ? GPU 0: 75.5C 2934RPM 55% | 333.0/332.5Mh/s | 875Mhz 1.1V A:306 R:4 HW:0 U:4.93/m I: 7 GPU 1: 74.0C 3907RPM 73% | 361.9/362.5Mh/s | 875Mhz 1.06V A:308 R:1 HW:0 U:4.96/m I: 7 GPU 2: 75.5C 3830RPM 72% | 332.8/332.5Mh/s | 875Mhz 1.06V A:281 R:1 HW:0 U:4.53/m I: 7 GPU 3: 73.0C 4168RPM 77% | 333.9/332.6Mh/s | 875Mhz 1.1V A:268 R:1 HW:0 U:4.32/m I: 7 GPU 4: 73.5C 3028RPM 58% | 334.3/332.5Mh/s | 875Mhz 1.1V A:242 R:1 HW:0 U:3.90/m I: 7
Lets get the obvious questions out of the way Could your drivers have updated recently? Your Obviously talking about the newer version of CGminer right? If not, SDK2.6 is your problem.
|
|
|
|
jjiimm_64
Legendary
Offline
Activity: 1876
Merit: 1000
|
|
January 14, 2012, 08:25:41 AM |
|
Lets get the obvious questions out of the way Could your drivers have updated recently? Your Obviously talking about the newer version of CGminer right? If not, SDK2.6 is your problem.
yes, i updated the ccc a month ago to get rid of the 100% bug. i have 11-12_vista64_win7_64_dd_ccc_ocl.exe if I run the older version of cgminer, i get the normal hashrates. This did not affect the other 14 rigs running linuxcoin
|
1jimbitm6hAKTjKX4qurCNQubbnk2YsFw
|
|
|
Fiyasko
Legendary
Offline
Activity: 1428
Merit: 1001
Okey Dokey Lokey
|
|
January 14, 2012, 09:02:33 AM |
|
Lets get the obvious questions out of the way Could your drivers have updated recently? Your Obviously talking about the newer version of CGminer right? If not, SDK2.6 is your problem.
yes, i updated the ccc a month ago to get rid of the 100% bug. i have 11-12_vista64_win7_64_dd_ccc_ocl.exe if I run the older version of cgminer, i get the normal hashrates. This did not affect the other 14 rigs running linuxcoin Who wants to jump in, Thats fucked
|
|
|
|
P4man
|
|
January 14, 2012, 10:18:32 AM |
|
Who wants to jump in, Thats fucked
I suspect you already gave the reason: "Loving this miner Because it compiled a SDK2.5 .bin, Making itself run off SDK 2.5 Whilst i have 2.6 installed"
|
|
|
|
|