OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.1

[cablepair]

thank you for posting that information, thats quite useful info, I have tested them all and the best for mining with 5xxxx in windows is 11.9 without a doubt

The 11.9 driver or the SDK that comes with it? Or both?

Remember that you can use any combination of driver/sdk, for example you could install 12.1 and afterwards install SDK 2.5.732.1 (which comes packed with the 11.9 driver).

yes I understand that, I have had best luck with 11.9 with the sdk it with, I recently tried many others including sdk 2.1 and 2.4

for windows 7 x64 radeon 5xxx I can confirm you cant get better than 11.9 with the sdk that comes with it.

[1713558309]

1713558309

[1713558309]

1713558309

[1713558309]

1713558309

[1713558309]

1713558309

[1713558309]

1713558309

[The00Dustin]

I'm not sure if this would indicate effectiveness of your fix for false positives on pools providing work, but thought I would provide it just in case:

Code:

[2012-01-31 12:01:39] New block detected on network before longpoll, waiting on fresh work
[2012-01-31 12:01:39] Pool 0 not providing work fast enough
[2012-01-31 12:01:39] LONGPOLL requested work restart, waiting on fresh work

Fedora 15 x64, cgminer 2.2.1, no shares were submitted to other pools in the vicinity of these records.

[rcocchiararo]

i finally got the time to compile 2.1.1, 2.1.2 and 2.2.1 on my debian machine (sdk 2.4).

Just like in windows, 2.2.1 is slower than 2.0.7, 2.1.1 and 2.1.2.

My hd5830 running at 975/300 produces 300 to 315 MHASH with the older versions, but with 2.2.1, it produces 280 to 290 MHASH.

[kano]

usual ... is it the same binary?
What does cgminer -n report for each ...
Edit: and cgminer -V
and are they pre-built or did you compile them?

[rcocchiararo]

usual ... is it the same binary?
What does cgminer -n report for each ...
Edit: and cgminer -V
and are they pre-built or did you compile them?

i had to compile them, because i made the mistake of installing an x86 debian on my home server (before reinstalling it, i was able to use your binaries).

On windows i use your binaries, of course.

Also, on windows, the difference is less noticeable, but its there too.

I mine only with 5830 (i recently got a new rig with 2 5850, with ubuntu, but i havent touched it yet, the previous owner had phoenix running, and its still running.

ps: how can i run cgminer when the user logs in, automatically ? i tried putting the script i use, but nothing happens (it does work if i double click it, i have it in /home/user/bitcoin, with a symlink on the desktop, which is what i use)

[kano]

Sorry, I meant is it the same *.bin file you are running with each one.
When you start cgminer the first time it creates the *.bin file.
Every time after that it will use the *.bin file it created the first time (unless you delete it)
The fastest *.bin should perform at the same speed no matter which version of cgminer you are using (unless there is a problem with the cgminer version you are using)

Lastly:
cgminer -n
cgminer -V
will report info - what do they say?

[rcocchiararo]

Sorry, I meant is it the same *.bin file you are running with each one.
When you start cgminer the first time it creates the *.bin file.
Every time after that it will use the *.bin file it created the first time (unless you delete it)
The fastest *.bin should perform at the same speed no matter which version of cgminer you are using (unless there is a problem with the cgminer version you are using)

Lastly:
cgminer -n
cgminer -V
will report info - what do they say?

I tried the binary created by each, on each one.

It seems like 2.1.1 or 2.1.2 create "the fastet binary".

But the difference is minimal.

Output from 2.1.2:
-n

1 GPU devices detected

Output from 2.1.1
-n

1 GPU devices detected

Output from 2.2.1
-n

1 GPU devices detected

About the other option, did you want -V or --verbose ?

i guess -V gives the version that was used for making the binary, because now im using the one from 2.1.2, and every cgminer reports 2.1.2 with -V (when i actually run them, i get the correct version printed onscreen).

I find it weird on linux that the binary is created where i phisically have whatever i use to run cgminer.

i have my scripts in /home/user/bitcoin, with my symlinks on my desktop, and the binary is made on my desktop.

(this is not the case for windows)

EDIT: just to clarify, i originally had 2.0.7, and i noticed the difference on mhash when i updated to 2.2.1, it wasnt until later that i compiled th other 2 versions

[gnar1ta$]

Code:

cgminer-2.2.1$ ./cgminer -ndev
[2012-01-31 21:54:21] CL Platform vendor: Advanced Micro Devices, Inc.
[2012-01-31 21:54:21] CL Platform name: AMD Accelerated Parallel Processing
[2012-01-31 21:54:21] CL Platform version: OpenCL 1.1 AMD-APP-SDK-v2.4 (595.10)
[2012-01-31 21:54:21] ADL Initialisation Error! Error -1!
[2012-01-31 21:54:21] 6 GPU devices detected

  Is this bad?

[-ck]

Output from 2.2.1
-n

1 GPU devices detected

2.2.1 would give you a lot more information than that with -n , like the very next poster:

[2012-01-31 21:54:21] CL Platform vendor: Advanced Micro Devices, Inc.
[2012-01-31 21:54:21] CL Platform name: AMD Accelerated Parallel Processing
[2012-01-31 21:54:21] CL Platform version: OpenCL 1.1 AMD-APP-SDK-v2.4 (595.10)
[2012-01-31 21:54:21] 6 GPU devices detected

[-ck]

Code:

cgminer-2.2.1$ ./cgminer -ndev
[2012-01-31 21:54:21] CL Platform vendor: Advanced Micro Devices, Inc.
[2012-01-31 21:54:21] CL Platform name: AMD Accelerated Parallel Processing
[2012-01-31 21:54:21] CL Platform version: OpenCL 1.1 AMD-APP-SDK-v2.4 (595.10)
[2012-01-31 21:54:21] ADL Initialisation Error! Error -1!
[2012-01-31 21:54:21] 6 GPU devices detected

  Is this bad?

Start the entire app the way you normally would and add "--verbose -D -T" and see what it says.

[rcocchiararo]

from 2.2.1

Code:

[2012-02-01 00:16:47] Started cgminer 2.2.1                    
[2012-02-01 00:16:47] CL Platform vendor: Advanced Micro Devices, Inc.                    
[2012-02-01 00:16:47] CL Platform name: AMD Accelerated Parallel Processing                    
[2012-02-01 00:16:47] CL Platform version: OpenCL 1.1 AMD-APP-SDK-v2.4 (595.10)                    
[2012-02-01 00:16:47] GPU 0 iAdapterIndex 0 strUDID 1280:26782:4098:57719:5963 iBusNumber 5 iDeviceNumber 0 iFunctionNumber 0 iVendorID 4098 strAdapterName  ATI Radeon HD 5800 Series                       
[2012-02-01 00:16:47] GPU 0 ATI Radeon HD 5800 Series   hardware monitoring enabled                    
[2012-02-01 00:16:47] Setting GPU 0 engine clock to 975                    
[2012-02-01 00:16:47] Setting GPU 0 memory clock to 300                    
[2012-02-01 00:16:47] Popping work to work thread                    
[2012-02-01 00:16:47] Testing pool http://pit.deepbit.net:8332                    
[2012-02-01 00:16:47] Popping work to stage thread                    
[2012-02-01 00:16:50] Successfully retrieved and deciphered work from pool 0 http://pit.deepbit.net:8332                    
[2012-02-01 00:16:50] Pushing pooltest work to base pool                    
[2012-02-01 00:16:50] Pushing work to getwork queue                    
[2012-02-01 00:16:50] Pool 0 http://pit.deepbit.net:8332 active                    
[2012-02-01 00:16:50] Popping work to stage thread                    
[2012-02-01 00:16:50] Testing pool http://api2.bitcoin.cz:8332                    
[2012-02-01 00:16:50] X-Roll-Ntime found                    
[2012-02-01 00:16:50] Successfully retrieved and deciphered work from pool 1 http://api2.bitcoin.cz:8332                    
[2012-02-01 00:16:50] Pushing pooltest work to base pool                    
[2012-02-01 00:16:50] Pool 1 http://api2.bitcoin.cz:8332 active                    
[2012-02-01 00:16:50] Pushing work to getwork queue                    
[2012-02-01 00:16:50] Testing pool http://pit.deepbit.net:8332                    
[2012-02-01 00:16:50] Popping work to stage thread                    
[2012-02-01 00:16:51] Successfully retrieved and deciphered work from pool 2 http://pit.deepbit.net:8332                    
[2012-02-01 00:16:51] Pushing pooltest work to base pool                    
[2012-02-01 00:16:51] Pushing work to getwork queue                    
[2012-02-01 00:16:51] Pool 2 http://pit.deepbit.net:8332 active                    
[2012-02-01 00:16:51] Popping work to stage thread                    
[2012-02-01 00:16:51] Testing pool http://api2.bitcoin.cz:8332                    
[2012-02-01 00:16:52] X-Roll-Ntime found                    
[2012-02-01 00:16:52] Successfully retrieved and deciphered work from pool 3 http://api2.bitcoin.cz:8332                    
[2012-02-01 00:16:52] Pushing pooltest work to base pool                    
[2012-02-01 00:16:52] Pushing work to getwork queue                    
[2012-02-01 00:16:52] Pool 3 http://api2.bitcoin.cz:8332 active                    
[2012-02-01 00:16:52] Popping work to stage thread                    
[2012-02-01 00:16:52] Pushing ping to longpoll thread                    
[2012-02-01 00:16:52] Pushing ping to thread 0                    
[2012-02-01 00:16:52] Init GPU thread 0 GPU 0 virtual GPU 0                    
[2012-02-01 00:16:52] Long-polling activated for http://pit.deepbit.net:8332/listenChannel                    
[2012-02-01 00:16:52] CL Platform vendor: Advanced Micro Devices, Inc.                    
[2012-02-01 00:16:52] CL Platform name: AMD Accelerated Parallel Processing                    
[2012-02-01 00:16:52] CL Platform version: OpenCL 1.1 AMD-APP-SDK-v2.4 (595.10)                    
[2012-02-01 00:16:52] List of devices:                    
[2012-02-01 00:16:52] 	0	Cypress                    
[2012-02-01 00:16:52] Selected 0: Cypress                    
[2012-02-01 00:16:52] Preferred vector width reported 4                    
[2012-02-01 00:16:52] Max work group size reported 256                    
[2012-02-01 00:16:52] Loaded binary image phatk110817Cypressbitalignv2w128long4.bin                    
[2012-02-01 00:16:52] Initialising kernel phatk110817.cl with BFI_INT, 2 vectors and worksize 128                    
[2012-02-01 00:16:53] initCl() finished. Found Cypress                    
[2012-02-01 00:16:53] Pushing ping to thread 1                    
[2012-02-01 00:16:53] Init GPU thread 1 GPU 0 virtual GPU 0                    
[2012-02-01 00:16:53] CL Platform vendor: Advanced Micro Devices, Inc.                    
[2012-02-01 00:16:53] CL Platform name: AMD Accelerated Parallel Processing                    
[2012-02-01 00:16:53] CL Platform version: OpenCL 1.1 AMD-APP-SDK-v2.4 (595.10)                    
[2012-02-01 00:16:53] List of devices:                    
[2012-02-01 00:16:53] 	0	Cypress                    
[2012-02-01 00:16:53] Selected 0: Cypress                    
[2012-02-01 00:16:53] Preferred vector width reported 4                    
[2012-02-01 00:16:53] Max work group size reported 256                    
[2012-02-01 00:16:53] Popping ping in miner thread                    
[2012-02-01 00:16:53] Popping work from get queue to get work                    
[2012-02-01 00:16:53] Loaded binary image phatk110817Cypressbitalignv2w128long4.bin                    
[2012-02-01 00:16:53] Initialising kernel phatk110817.cl with BFI_INT, 2 vectors and worksize 128                    
[2012-02-01 00:16:54] initCl() finished. Found Cypress                    
[2012-02-01 00:16:54] 2 gpu miner threads started                    
[2012-02-01 00:16:54] Popping ping in miner thread                    
[2012-02-01 00:16:54] Popping work from get queue to get work                    
[2012-02-01 00:16:55] Thread 1 being disabled                    
[2012-02-01 00:16:55] Popping wakeup ping in miner thread                    
[2012-02-01 00:16:57] 50.5 C  F: 80%(3482RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 0%  P: 0%                    
[2012-02-01 00:16:58] [thread 0: 758349824 hashes, 151285850 khash/sec]                    
[2012-02-01 00:16:59] --donation is disabled, please consider just 0.5% :-(                    
[2012-02-01 00:16:59] API running in UNRESTRICTED access mode                    
[2012-02-01 00:17:00] 53.0 C  F: 80%(3477RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 66%  P: 0%                    
[2012-02-01 00:17:03] 54.0 C  F: 80%(3471RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 78%  P: 0%                    
[2012-02-01 00:17:03] [thread 0: 1380253696 hashes, 273486259 khash/sec]                    
[2012-02-01 00:17:06] Temperature 3 degrees below target, decreasing fanspeed                    
[2012-02-01 00:17:06] Setting GPU 0 fan percentage to 79                    
[2012-02-01 00:17:06] 53.0 C  F: 79%(3489RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 89%  P: 0%                    
[2012-02-01 00:17:08] [thread 0: 1118403584 hashes, 222136866 khash/sec]                    
[2012-02-01 00:17:09] 53.5 C  F: 79%(3444RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 76%  P: 0%                    
[2012-02-01 00:17:12] Temperature 3 degrees below target, decreasing fanspeed                    
[2012-02-01 00:17:12] Setting GPU 0 fan percentage to 78                    
[2012-02-01 00:17:12] 52.5 C  F: 78%(3470RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 72%  P: 0%                    
[2012-02-01 00:17:12] Popping work from get queue to get work                    
[2012-02-01 00:17:13] [thread 0: 1118683136 hashes, 222251719 khash/sec]                    
[2012-02-01 00:17:15] 54.5 C  F: 78%(3367RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 79%  P: 0%                    
[2012-02-01 00:17:18] 55.5 C  F: 78%(3375RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 83%  P: 0%                    
[2012-02-01 00:17:18] [thread 0: 1388314624 hashes, 276918899 khash/sec]                    
[2012-02-01 00:17:21] Temperature 3 degrees below target, decreasing fanspeed                    
[2012-02-01 00:17:21] Setting GPU 0 fan percentage to 77                    
[2012-02-01 00:17:21] 55.5 C  F: 77%(3375RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 86%  P: 0%                    
[2012-02-01 00:17:23] [thread 0: 1292304384 hashes, 257636081 khash/sec]                    
[2012-02-01 00:17:24] Queueing getwork request to work thread                    
[2012-02-01 00:17:24] Popping work to work thread                    
[2012-02-01 00:17:24] DBG: sending http://pit.deepbit.net:8332 get RPC call: {"method": "getwork", "params": [], "id":0}
                    
[2012-02-01 00:17:24] Temperature 3 degrees below target, decreasing fanspeed                    
[2012-02-01 00:17:24] Setting GPU 0 fan percentage to 76                    
[2012-02-01 00:17:24] 55.0 C  F: 76%(3342RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 79%  P: 0%                    
[2012-02-01 00:17:24] Pushing work to requesting thread                    
[2012-02-01 00:17:24] Pushing work to getwork queue                    
[2012-02-01 00:17:24] Popping work to stage thread                    
[2012-02-01 00:17:27] Temperature 3 degrees below target, decreasing fanspeed                    
[2012-02-01 00:17:27] Setting GPU 0 fan percentage to 75                    
[2012-02-01 00:17:27] 54.5 C  F: 75%(3310RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 74%  P: 0%                    
[2012-02-01 00:17:28] [thread 0: 850003712 hashes, 168812740 khash/sec]                    
[2012-02-01 00:17:30] 55.5 C  F: 75%(3251RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 70%  P: 0%                    
[2012-02-01 00:17:30] Popping work from get queue to get work                    
[2012-02-01 00:17:31] GPU 0 found something?                    
[2012-02-01 00:17:31]  Proof: 00000000b71c59f7a29c825eb0c5c005ed0f801b935417503cf466263c05b16b
Target: 00000000ffffffffffffffffffffffffffffffffffffffffffffffffffffffff
TrgVal? YES (hash < target)                    
[2012-02-01 00:17:31] Pushing submit work to work thread                    
[2012-02-01 00:17:31] Popping work to work thread                    
[2012-02-01 00:17:31] DBG: sending http://api2.bitcoin.cz:8332 submit RPC call: {"method": "getwork", "params": [ "0000000162236c5eac4bd0f3e4e63a2d00e8e0819e4d5a3215b09c9d00000c41000000008ec4090ffae15dfc14b4e5f59e1e0608ada8ac53a79f967da643fb554ff3cbac4f28aced1a0cd43f048cda01000000800000000000000000000000000000000000000000000000000000000000000000000000000000000080020000" ], "id":1}                    
[2012-02-01 00:17:31] X-Roll-Ntime found                    
[2012-02-01 00:17:31] PROOF OF WORK RESULT: true (yay!!!)                    
[2012-02-01 00:17:31] Accepted 00000000.b71c59f7.a29c825e GPU 0 thread 0 pool 3                    
GPU0  56.0C 3249RPM | (5s):186.4 (avg):218.9 Mh/s | A:1 R:0 HW:0 U:1.66/m I: 4
[2012-02-01 00:17:31] GPU0  56.0C 3249RPM | (5s):186.4 (avg):218.9 Mh/s | A:1 R:0 HW:0 U:1.66/m I: 4                    
[2012-02-01 00:17:33] Temperature 3 degrees below target, decreasing fanspeed                    
[2012-02-01 00:17:33] Setting GPU 0 fan percentage to 74                    
[2012-02-01 00:17:33] 56.5 C  F: 74%(3249RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 75%  P: 0%                    
[2012-02-01 00:17:33] [thread 0: 1319632896 hashes, 263072331 khash/sec]                    
[2012-02-01 00:17:36] Temperature 3 degrees below target, decreasing fanspeed                    
[2012-02-01 00:17:36] Setting GPU 0 fan percentage to 73                    
[2012-02-01 00:17:36] 56.5 C  F: 73%(3213RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 86%  P: 0%                    
[2012-02-01 00:17:38] [thread 0: 1416888320 hashes, 282700258 khash/sec]                    
[2012-02-01 00:17:39] Temperature 3 degrees below target, decreasing fanspeed                    
[2012-02-01 00:17:39] Setting GPU 0 fan percentage to 72                    
[2012-02-01 00:17:39] 57.0 C  F: 72%(3180RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 89%  P: 0%                    
[2012-02-01 00:17:41] Queueing getwork request to work thread                    
[2012-02-01 00:17:41] Popping work to work thread                    
[2012-02-01 00:17:41] DBG: sending http://pit.deepbit.net:8332 get RPC call: {"method": "getwork", "params": [], "id":0}
                    
[2012-02-01 00:17:42] Pushing work to requesting thread                    
[2012-02-01 00:17:42] Pushing work to getwork queue                    
[2012-02-01 00:17:42] Popping work to stage thread                    
[2012-02-01 00:17:42] Temperature 3 degrees below target, decreasing fanspeed                    
[2012-02-01 00:17:42] Setting GPU 0 fan percentage to 71                    
[2012-02-01 00:17:42] 56.5 C  F: 71%(3106RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 87%  P: 0%                    
[2012-02-01 00:17:43] [thread 0: 1270874112 hashes, 253131868 khash/sec]                    
[2012-02-01 00:17:45] 57.5 C  F: 71%(3068RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 83%  P: 0%                    
[2012-02-01 00:17:48] Temperature 3 degrees below target, decreasing fanspeed                    
[2012-02-01 00:17:48] Setting GPU 0 fan percentage to 70                    
[2012-02-01 00:17:48] 57.0 C  F: 70%(3072RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 68%  P: 0%                    
[2012-02-01 00:17:48] Popping work from get queue to get work                    
[2012-02-01 00:17:48] [thread 0: 976819968 hashes, 194189304 khash/sec]                    
[2012-02-01 00:17:51] Temperature 3 degrees below target, decreasing fanspeed                    
[2012-02-01 00:17:51] Setting GPU 0 fan percentage to 69                    
[2012-02-01 00:17:51] 54.0 C  F: 69%(3070RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 59%  P: 0%                    
[2012-02-01 00:17:53] [thread 0: 936970752 hashes, 186360113 khash/sec]                    
[2012-02-01 00:17:54] 57.0 C  F: 69%(2959RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 67%  P: 0%                    
[2012-02-01 00:17:57] Temperature 3 degrees below target, decreasing fanspeed                    
[2012-02-01 00:17:57] Setting GPU 0 fan percentage to 68                    
[2012-02-01 00:17:57] 58.0 C  F: 68%(2956RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 80%  P: 0%                    
[2012-02-01 00:17:58] [thread 0: 1379270656 hashes, 275003819 khash/sec]                    
[2012-02-01 00:17:58] GPU 0 found something?                    /m          
[2012-02-01 00:17:58]  Proof: 00000000e29f0ca00a56bb797d860ae5452e1dbe9c6c966daeadc0a46c62b2a1
Target: 00000000ffffffffffffffffffffffffffffffffffffffffffffffffffffffff
TrgVal? YES (hash < target)                    
[2012-02-01 00:17:58] Pushing submit work to work thread                    
[2012-02-01 00:17:58] Popping work to work thread                    
[2012-02-01 00:17:58] DBG: sending http://pit.deepbit.net:8332 submit RPC call: {"method": "getwork", "params": [ "0000000162236c5eac4bd0f3e4e63a2d00e8e0819e4d5a3215b09c9d00000c410000000013736002dd8a15dfe5254b9a4499a5bdd43e54bc266dc5bb0b6ebd65550b458f4f28acf61a0cd43fe3da8690000000800000000000000000000000000000000000000000000000000000000000000000000000000000000080020000" ], "id":1}                    
[2012-02-01 00:17:59] PROOF OF WORK RESULT: true (yay!!!)                    
[2012-02-01 00:17:59] Accepted 00000000.e29f0ca0.0a56bb79 GPU 0 thread 0 pool 0                    
GPU0  58.0C 2923RPM | (5s):262.2 (avg):229.6 Mh/s | A:2 R:0 HW:0 U:1.81/m I: 4
[2012-02-01 00:17:59] GPU0  58.0C 2923RPM | (5s):262.2 (avg):229.6 Mh/s | A:2 R:0 HW:0 U:1.81/m I: 4                    
[2012-02-01 00:18:00] Queueing getwork request to work thread                    
[2012-02-01 00:18:00] Popping work to work thread                    
[2012-02-01 00:18:00] DBG: sending http://pit.deepbit.net:8332 get RPC call: {"method": "getwork", "params": [], "id":0}
                    
[2012-02-01 00:18:00] 57.5 C  F: 68%(2933RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 88%  P: 0%                    
[2012-02-01 00:18:01] Pushing work to requesting thread                    
[2012-02-01 00:18:01] Pushing work to getwork queue                    
[2012-02-01 00:18:01] Popping work to stage thread                    
[2012-02-01 00:18:03] [thread 0: 1361575936 hashes, 271657504 khash/sec]                    
[2012-02-01 00:18:03] Temperature 3 degrees below target, decreasing fanspeed                    
[2012-02-01 00:18:03] Setting GPU 0 fan percentage to 67                    
[2012-02-01 00:18:03] 58.0 C  F: 67%(2918RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 87%  P: 0%                    
[2012-02-01 00:18:05] Popping work from get queue to get work                    
[2012-02-01 00:18:06] Temperature 3 degrees below target, decreasing fanspeed                    
[2012-02-01 00:18:06] Setting GPU 0 fan percentage to 66                    
[2012-02-01 00:18:06] 58.5 C  F: 66%(2845RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 89%  P: 0%                    
[2012-02-01 00:18:08] [thread 0: 1396703232 hashes, 278221694 khash/sec]                    
[2012-02-01 00:18:09] 59.0 C  F: 66%(2821RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 90%  P: 0%                    
[2012-02-01 00:18:12] GPU 0 found something?                    
[2012-02-01 00:18:12]  Proof: 0000000028ebcba99e615143d13eb86e05d39fe3060c4f011b6d0c1a0ad6760d
Target: 00000000ffffffffffffffffffffffffffffffffffffffffffffffffffffffff
TrgVal? YES (hash < target)                    
[2012-02-01 00:18:12] Pushing submit work to work thread                    
[2012-02-01 00:18:12] Popping work to work thread                    
[2012-02-01 00:18:12] DBG: sending http://pit.deepbit.net:8332 submit RPC call: {"method": "getwork", "params": [ "0000000162236c5eac4bd0f3e4e63a2d00e8e0819e4d5a3215b09c9d00000c4100000000f72ca000b7171dedc08e26ff689e8e7ff19a5a581bd368f8056cf45a8d0336dd4f28ad051a0cd43f0ea6de6f000000800000000000000000000000000000000000000000000000000000000000000000000000000000000080020000" ], "id":1}                    
[2012-02-01 00:18:12] Temperature 3 degrees below target, decreasing fanspeed                    
[2012-02-01 00:18:12] Setting GPU 0 fan percentage to 65                    
[2012-02-01 00:18:12] 59.0 C  F: 65%(2822RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 90%  P: 0%                    
[2012-02-01 00:18:13] PROOF OF WORK RESULT: true (yay!!!)                    
[2012-02-01 00:18:13] Accepted 00000000.28ebcba9.9e615143 GPU 0 thread 0 pool 0                    
GPU0  59.0C 2812RPM | (5s):263.4 (avg):235.5 Mh/s | A:3 R:0 HW:0 U:2.36/m I: 4
[2012-02-01 00:18:13] GPU0  58.5C 2812RPM | (5s):263.4 (avg):235.5 Mh/s | A:3 R:0 HW:0 U:2.36/m I: 4                    
[2012-02-01 00:18:13] [thread 0: 1324154880 hashes, 264269614 khash/sec]                    
[2012-02-01 00:18:15] Temperature 3 degrees below target, decreasing fanspeed                    
[2012-02-01 00:18:15] Setting GPU 0 fan percentage to 64                    
[2012-02-01 00:18:15] 59.0 C  F: 64%(2781RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 86%  P: 0%                    
[2012-02-01 00:18:16] Queueing getwork request to work thread                    
[2012-02-01 00:18:16] Popping work to work thread                    
[2012-02-01 00:18:16] DBG: sending http://pit.deepbit.net:8332 get RPC call: {"method": "getwork", "params": [], "id":0}
                    
[2012-02-01 00:18:17] Pushing work to requesting thread                    
[2012-02-01 00:18:17] Pushing work to getwork queue                    
[2012-02-01 00:18:17] Popping work to stage thread                    
[2012-02-01 00:18:18] [thread 0: 1348075520 hashes, 268956698 khash/sec]                    
[2012-02-01 00:18:18] Temperature 3 degrees below target, decreasing fanspeed                    
[2012-02-01 00:18:18] Setting GPU 0 fan percentage to 63                    
[2012-02-01 00:18:18] 59.5 C  F: 63%(2715RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 85%  P: 0%                    
[2012-02-01 00:18:21] Popping work from get queue to get work                    
[2012-02-01 00:18:21] 60.0 C  F: 63%(2685RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 87%  P: 0%                    
[2012-02-01 00:18:23] [thread 0: 1370554368 hashes, 273205525 khash/sec]                    
[2012-02-01 00:18:24] Temperature 3 degrees below target, decreasing fanspeed                    
[2012-02-01 00:18:24] Setting GPU 0 fan percentage to 62                    
[2012-02-01 00:18:24] 60.5 C  F: 62%(2680RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 88%  P: 0%                    
[2012-02-01 00:18:27] Temperature 3 degrees below target, decreasing fanspeed                    
[2012-02-01 00:18:27] Setting GPU 0 fan percentage to 61                    
[2012-02-01 00:18:27] 61.0 C  F: 61%(2637RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 90%  P: 0%                    
[2012-02-01 00:18:28] [thread 0: 1388183552 hashes, 276899051 khash/sec]                    
[2012-02-01 00:18:30] 60.5 C  F: 61%(2556RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 90%  P: 0%                    
[2012-02-01 00:18:32] Queueing getwork request to work thread                    
[2012-02-01 00:18:32] Popping work to work thread                    
[2012-02-01 00:18:32] DBG: sending http://pit.deepbit.net:8332 get RPC call: {"method": "getwork", "params": [], "id":0}
                    
[2012-02-01 00:18:32] Pushing work to requesting thread                    
[2012-02-01 00:18:32] Pushing work to getwork queue                    
[2012-02-01 00:18:32] Popping work to stage thread                    
[2012-02-01 00:18:33] [thread 0: 1354891264 hashes, 270292575 khash/sec]                    
[2012-02-01 00:18:33] Temperature 3 degrees below target, decreasing fanspeed                    
[2012-02-01 00:18:33] Setting GPU 0 fan percentage to 60                    
[2012-02-01 00:18:33] 61.0 C  F: 60%(2564RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 87%  P: 0%                    

from 2.1.2

Code:

[2012-02-01 00:21:02] Started cgminer 2.1.2                    
[2012-02-01 00:21:02] Popping work to work thread                    
[2012-02-01 00:21:02] Testing pool http://pit.deepbit.net:8332                    
[2012-02-01 00:21:02] Popping work to stage thread                    
[2012-02-01 00:21:02] Successfully retrieved and deciphered work from pool 0 http://pit.deepbit.net:8332                    
[2012-02-01 00:21:02] Pushing pooltest work to base pool                    
[2012-02-01 00:21:02] Pool 0 http://pit.deepbit.net:8332 active                    
[2012-02-01 00:21:02] Pushing work to getwork queue                    
[2012-02-01 00:21:02] Testing pool http://api2.bitcoin.cz:8332                    
[2012-02-01 00:21:02] Popping work to stage thread                    
[2012-02-01 00:21:03] X-Roll-Ntime found                    
[2012-02-01 00:21:03] Successfully retrieved and deciphered work from pool 1 http://api2.bitcoin.cz:8332                    
[2012-02-01 00:21:03] Pushing pooltest work to base pool                    
[2012-02-01 00:21:03] Pool 1 http://api2.bitcoin.cz:8332 active                    
[2012-02-01 00:21:03] Pushing work to getwork queue                    
[2012-02-01 00:21:03] Popping work to stage thread                    
[2012-02-01 00:21:03] Pushing ping to longpoll thread                    
[2012-02-01 00:21:03] Long-polling activated for http://pit.deepbit.net:8332/listenChannel                    
[2012-02-01 00:21:03] Setting GPU 0 engine clock to 975                    
[2012-02-01 00:21:03] Setting GPU 0 memory clock to 300                    
[2012-02-01 00:21:03] Pushing ping to thread 0                    
[2012-02-01 00:21:03] Init GPU thread 0                    
[2012-02-01 00:21:03] List of devices:                    
[2012-02-01 00:21:03] 	0	Cypress                    
[2012-02-01 00:21:03] Selected 0: Cypress                    
[2012-02-01 00:21:03] Preferred vector width reported 4                    
[2012-02-01 00:21:03] Max work group size reported 256                    
[2012-02-01 00:21:03] Loaded binary image phatk110817Cypressbitalignv2w128long4.bin                    
[2012-02-01 00:21:03] Initialising kernel phatk110817.cl with BFI_INT patching, 2 vectors and worksize 128                    
[2012-02-01 00:21:04] initCl() finished. Found Cypress                    
[2012-02-01 00:21:04] Pushing ping to thread 1                    
[2012-02-01 00:21:04] Init GPU thread 1                    
[2012-02-01 00:21:04] List of devices:                    
[2012-02-01 00:21:04] 	0	Cypress                    
[2012-02-01 00:21:04] Selected 0: Cypress                    
[2012-02-01 00:21:04] Preferred vector width reported 4                    
[2012-02-01 00:21:04] Max work group size reported 256                    
[2012-02-01 00:21:04] Popping ping in gpuminer thread                    
[2012-02-01 00:21:04] Popping work from get queue to get work                    
[2012-02-01 00:21:04] Loaded binary image phatk110817Cypressbitalignv2w128long4.bin                    
[2012-02-01 00:21:04] Initialising kernel phatk110817.cl with BFI_INT patching, 2 vectors and worksize 128                    
[2012-02-01 00:21:05] initCl() finished. Found Cypress                    
[2012-02-01 00:21:05] 2 gpu miner threads started                    
[2012-02-01 00:21:05] 0 cpu miner threads started, using SHA256 'c' algorithm.                    
[2012-02-01 00:21:05] Popping ping in gpuminer thread                    
[2012-02-01 00:21:05] Queueing getwork request to work thread                    
[2012-02-01 00:21:05] Popping work from get queue to get work                    
[2012-02-01 00:21:05] Successfully rolled work                    
[2012-02-01 00:21:05] Pushing divided work to get queue head                    
[2012-02-01 00:21:05] Popping work to work thread                    
[2012-02-01 00:21:05] DBG: sending http://pit.deepbit.net:8332 get RPC call: {"method": "getwork", "params": [], "id":0}
                    
[2012-02-01 00:21:05] [thread 0: 75825152 hashes, 75739869 khash/sec]                    
[2012-02-01 00:21:06] Pushing work to requesting thread                    
[2012-02-01 00:21:06] Pushing work to getwork queue                    
[2012-02-01 00:21:06] Popping work to stage thread                    
[2012-02-01 00:21:06] [thread 1: 31522816 hashes, 31497555 khash/sec]                    
[2012-02-01 00:21:06] [thread 0: 30572544 hashes, 30390263 khash/sec]                    
[2012-02-01 00:21:07] [thread 1: 17686528 hashes, 17653181 khash/sec]                    
[2012-02-01 00:21:07] [thread 0: 17076224 hashes, 17012360 khash/sec]                    
[2012-02-01 00:21:08] 63.5 C  F: 80%(3461RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 90%  P: 0%                    
[2012-02-01 00:21:08] [thread 1: 22511616 hashes, 22504910 khash/sec]                    
[2012-02-01 00:21:08] [thread 0: 19595264 hashes, 19493682 khash/sec]                    
[2012-02-01 00:21:09] [thread 1: 20451328 hashes, 20118448 khash/sec]                    
[2012-02-01 00:21:09] [thread 0: 17571840 hashes, 17505285 khash/sec]                    
[2012-02-01 00:21:10] --donation is disabled, please consider just 0.5% :-(                    
[2012-02-01 00:21:10] API bind to port 4028 failed - trying again in 15sec                    
[2012-02-01 00:21:10] [thread 1: 30494720 hashes, 30445398 khash/sec]                    
[2012-02-01 00:21:10] [thread 0: 30150656 hashes, 30007520 khash/sec]                    
[2012-02-01 00:21:11] 62.5 C  F: 68%(2989RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 88%  P: 0%                    
[2012-02-01 00:21:11] [thread 1: 24653824 hashes, 24508708 khash/sec]                    
[2012-02-01 00:21:11] [thread 0: 24264704 hashes, 24237219 khash/sec]                    
[2012-02-01 00:21:12] [thread 1: 30765056 hashes, 30728090 khash/sec]                    
[2012-02-01 00:21:12] [thread 0: 31965184 hashes, 31892374 khash/sec]                    
[2012-02-01 00:21:13] [thread 1: 19521536 hashes, 19281463 khash/sec]                    
[2012-02-01 00:21:13] [thread 0: 21700608 hashes, 21684128 khash/sec]                    
[2012-02-01 00:21:14] 62.5 C  F: 68%(2931RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 84%  P: 0%                    
[2012-02-01 00:21:14] [thread 1: 33218560 hashes, 33108639 khash/sec]                    
[2012-02-01 00:21:14] [thread 0: 33730560 hashes, 33615762 khash/sec]                    
[2012-02-01 00:21:15] [thread 1: 26034176 hashes, 25932572 khash/sec]                    
[2012-02-01 00:21:15] [thread 0: 28147712 hashes, 28140227 khash/sec]                    
[2012-02-01 00:21:16] [thread 1: 22468608 hashes, 22374523 khash/sec]                    
[2012-02-01 00:21:16] [thread 0: 21831680 hashes, 21820748 khash/sec]                    
[2012-02-01 00:21:17] 63.5 C  F: 69%(2971RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 88%  P: 0%                    
[2012-02-01 00:21:17] [thread 1: 22839296 hashes, 22607076 khash/sec]                    
[2012-02-01 00:21:17] [thread 0: 24510464 hashes, 24365271 khash/sec]                    
[2012-02-01 00:21:18] [thread 0: 20054016 hashes, 19984331 khash/sec]                    
[2012-02-01 00:21:18] [thread 1: 20152320 hashes, 19996487 khash/sec]                    
[2012-02-01 00:21:19] [thread 0: 13606912 hashes, 13577341 khash/sec]                    
[2012-02-01 00:21:19] [thread 1: 13467648 hashes, 13395766 khash/sec]                    
[2012-02-01 00:21:20] 63.0 C  F: 69%(2969RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 93%  P: 0%                    
[2012-02-01 00:21:20] [thread 0: 16171008 hashes, 16154385 khash/sec]                    
[2012-02-01 00:21:20] [thread 1: 17924096 hashes, 17858057 khash/sec]                    
[2012-02-01 00:21:21] [thread 0: 14254080 hashes, 14166235 khash/sec]                    
[2012-02-01 00:21:21] [thread 1: 15826944 hashes, 15771193 khash/sec]                    
[2012-02-01 00:21:22] [thread 0: 13836288 hashes, 13811896 khash/sec]                    
[2012-02-01 00:21:22] [thread 1: 14622720 hashes, 14598049 khash/sec]                    
[2012-02-01 00:21:23] 63.5 C  F: 69%(2974RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 95%  P: 0%                    
[2012-02-01 00:21:23] [thread 0: 14073856 hashes, 14039165 khash/sec]                    
[2012-02-01 00:21:23] [thread 1: 12697600 hashes, 12664621 khash/sec]                    
[2012-02-01 00:21:24] [thread 0: 37240832 hashes, 36968522 khash/sec]                    
[2012-02-01 00:21:24] [thread 1: 36073472 hashes, 35983190 khash/sec]                    
[2012-02-01 00:21:25] API bind to port 4028 failed - trying again in 15sec                    
[2012-02-01 00:21:25] [thread 1: 13972480 hashes, 13969868 khash/sec]                    
[2012-02-01 00:21:25] [thread 0: 13750528 hashes, 13710657 khash/sec]                    
[2012-02-01 00:21:26] 63.5 C  F: 69%(2959RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 93%  P: 0%                    
[2012-02-01 00:21:26] [thread 1: 16334848 hashes, 16314390 khash/sec]                    
[2012-02-01 00:21:26] [thread 0: 17448960 hashes, 17361303 khash/sec]                    
[2012-02-01 00:21:27] [thread 1: 14434304 hashes, 14414254 khash/sec]                    
[2012-02-01 00:21:27] [thread 0: 13828096 hashes, 13759916 khash/sec]                    
[2012-02-01 00:21:28] [thread 1: 9117696 hashes, 9111227 khash/sec]                    
[2012-02-01 00:21:28] [thread 0: 9797632 hashes, 9790475 khash/sec]                    
[2012-02-01 00:21:29] 63.5 C  F: 70%(3038RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 93%  P: 0%                    
[2012-02-01 00:21:29] [thread 1: 16404480 hashes, 16298653 khash/sec]                    
[2012-02-01 00:21:29] [thread 0: 15638528 hashes, 15595111 khash/sec]                    
[2012-02-01 00:21:30] [thread 1: 15810560 hashes, 15781884 khash/sec]                    
[2012-02-01 00:21:30] [thread 0: 15892480 hashes, 15805612 khash/sec]                    
[2012-02-01 00:21:31] [thread 1: 14630912 hashes, 14612369 khash/sec]                    
[2012-02-01 00:21:31] [thread 0: 13729792 hashes, 13708927 khash/sec]                    
[2012-02-01 00:21:32] 64.0 C  F: 69%(2967RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 93%  P: 0%                    
[2012-02-01 00:21:32] [thread 0: 25159680 hashes, 25045448 khash/sec]                    
[2012-02-01 00:21:32] [thread 1: 20664320 hashes, 20413943 khash/sec]                    
[2012-02-01 00:21:33] [thread 0: 30572544 hashes, 30513470 khash/sec]                    
[2012-02-01 00:21:33] [thread 1: 30769152 hashes, 30595370 khash/sec]                    
[2012-02-01 00:21:34] [thread 0: 13320704 hashes, 13295655 khash/sec]                    
[2012-02-01 00:21:34] [thread 1: 13392896 hashes, 13317929 khash/sec]                    
[2012-02-01 00:21:35] 64.0 C  F: 69%(2968RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 91%  P: 0%                    
[2012-02-01 00:21:35] [thread 0: 14114816 hashes, 14111401 khash/sec]                    
[2012-02-01 00:21:35] [thread 1: 13918208 hashes, 13901429 khash/sec]                    
[2012-02-01 00:21:36] [thread 0: 24092672 hashes, 23923081 khash/sec]                    
[2012-02-01 00:21:36] [thread 1: 25395200 hashes, 25227337 khash/sec]                    
[2012-02-01 00:21:37] [thread 0: 19677184 hashes, 19660394 khash/sec]                    
[2012-02-01 00:21:37] [thread 1: 19406848 hashes, 19401668 khash/sec]                    
[2012-02-01 00:21:38] 64.0 C  F: 69%(2962RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 92%  P: 0%                    
[2012-02-01 00:21:38] [thread 0: 19103744 hashes, 19082486 khash/sec]                    
[2012-02-01 00:21:38] [thread 1: 18268160 hashes, 18124343 khash/sec]                    
[2012-02-01 00:21:39] [thread 0: 20086784 hashes, 20048912 khash/sec]                    
[2012-02-01 00:21:39] [thread 1: 20217856 hashes, 20199353 khash/sec]                    
[2012-02-01 00:21:40] API bind to port 4028 failed - trying again in 15sec                    
[2012-02-01 00:21:40] [thread 0: 20840448 hashes, 20790945 khash/sec]                    
[2012-02-01 00:21:40] [thread 1: 20774912 hashes, 20651848 khash/sec]                    
[2012-02-01 00:21:41] 63.0 C  F: 70%(3037RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 92%  P: 0%                    
[2012-02-01 00:21:41] [thread 0: 21610496 hashes, 21500050 khash/sec]                    
[2012-02-01 00:21:41] [thread 1: 19447808 hashes, 19446233 khash/sec]                    
[2012-02-01 00:21:42] [thread 0: 44965888 hashes, 44931381 khash/sec]                    
[2012-02-01 00:21:42] [thread 1: 48021504 hashes, 47923883 khash/sec]                    
[2012-02-01 00:21:43] [thread 0: 13574144 hashes, 13548821 khash/sec]                    
[2012-02-01 00:21:43] [thread 1: 15749120 hashes, 15746128 khash/sec]                    
[2012-02-01 00:21:44] 63.5 C  F: 69%(2976RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 85%  P: 0%                    
[2012-02-01 00:21:44] [thread 0: 17408000 hashes, 17319963 khash/sec]                    
[2012-02-01 00:21:44] [thread 1: 16424960 hashes, 16402865 khash/sec]                    
[2012-02-01 00:21:45] [thread 0: 14630912 hashes, 14566847 khash/sec]                    
[2012-02-01 00:21:45] [thread 1: 14319616 hashes, 14259995 khash/sec]                    
[2012-02-01 00:21:46] [thread 0: 22978560 hashes, 22879879 khash/sec]                    
[2012-02-01 00:21:46] [thread 1: 23363584 hashes, 23246630 khash/sec]                    
[2012-02-01 00:21:47] 63.5 C  F: 69%(2976RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 85%  P: 0%                    
[2012-02-01 00:21:47] [thread 0: 27369472 hashes, 27291555 khash/sec]                    
[2012-02-01 00:21:47] [thread 1: 33226752 hashes, 33122284 khash/sec]                    
[2012-02-01 00:21:48] [thread 0: 57163776 hashes, 56931722 khash/sec]                    
[2012-02-01 00:21:48] [thread 1: 57737216 hashes, 57524490 khash/sec]                    
[2012-02-01 00:21:49] [thread 0: 42731520 hashes, 42481727 khash/sec]                    
[2012-02-01 00:21:49] [thread 1: 44275712 hashes, 44202733 khash/sec]                    
[2012-02-01 00:21:50] 64.0 C  F: 69%(2971RPM)  E: 975MHz  M: 300Mhz  V: 1.163V  A: 91%  P: 0%                    
[2012-02-01 00:21:50] [thread 0: 16130048 hashes, 16056541 khash/sec]                    
[2012-02-01 00:21:50] [thread 1: 15966208 hashes, 15950720 khash/sec]                    

and -n from 2.2.1 (something was wrong with my terminal last time evidently)

Code:

[2012-02-01 00:23:22] CL Platform vendor: Advanced Micro Devices, Inc.
[2012-02-01 00:23:22] CL Platform name: AMD Accelerated Parallel Processing
[2012-02-01 00:23:22] CL Platform version: OpenCL 1.1 AMD-APP-SDK-v2.4 (595.10)
[2012-02-01 00:23:22] GPU 0 ATI Radeon HD 5800 Series   hardware monitoring enabled
[2012-02-01 00:23:22] Setting GPU 0 engine clock to 975
[2012-02-01 00:23:22] Setting GPU 0 memory clock to 300
[2012-02-01 00:23:22] 1 GPU devices detected

[kano]

Code:

cgminer-2.2.1$ ./cgminer -ndev
[2012-01-31 21:54:21] CL Platform vendor: Advanced Micro Devices, Inc.
[2012-01-31 21:54:21] CL Platform name: AMD Accelerated Parallel Processing
[2012-01-31 21:54:21] CL Platform version: OpenCL 1.1 AMD-APP-SDK-v2.4 (595.10)
[2012-01-31 21:54:21] ADL Initialisation Error! Error -1!
[2012-01-31 21:54:21] 6 GPU devices detected

  Is this bad?

I'd think 6 GPU's is pretty good! I only have 2 6950's
However ... DISPLAY is probably missing from that run?

[gnar1ta$]

I'd think 6 GPU's is pretty good! I only have 2 6950's
However ... DISPLAY is probably missing from that run?

It would be better if they were mining 

Code:

cgminer-2.2.1/cgminer -ndevs
[2012-01-31 22:27:22] CL Platform vendor: Advanced Micro Devices, Inc.
[2012-01-31 22:27:22] CL Platform name: AMD Accelerated Parallel Processing
[2012-01-31 22:27:22] CL Platform version: OpenCL 1.1 AMD-APP-SDK-v2.4 (595.10)
[2012-01-31 22:27:22] GPU 0 AMD Radeon HD 6900 Series  hardware monitoring enabled
[2012-01-31 22:27:22] Setting GPU 0 engine clock to 850
[2012-01-31 22:27:22] Setting GPU 0 memory clock to 725
[2012-01-31 22:27:22] GPU 1 AMD Radeon HD 6900 Series  hardware monitoring enabled
[2012-01-31 22:27:22] Setting GPU 1 engine clock to 850
[2012-01-31 22:27:22] Setting GPU 1 memory clock to 725
[2012-01-31 22:27:22] GPU 2 AMD Radeon HD 6900 Series  hardware monitoring enabled
[2012-01-31 22:27:22] Setting GPU 2 engine clock to 850
[2012-01-31 22:27:22] Setting GPU 2 memory clock to 725
[2012-01-31 22:27:22] GPU 3 AMD Radeon HD 6900 Series  hardware monitoring enabled
[2012-01-31 22:27:22] Setting GPU 3 engine clock to 850
[2012-01-31 22:27:22] Setting GPU 3 memory clock to 725
[2012-01-31 22:27:22] GPU 4 AMD Radeon HD 6900 Series  hardware monitoring enabled
[2012-01-31 22:27:22] Setting GPU 4 engine clock to 850
[2012-01-31 22:27:22] Setting GPU 4 memory clock to 725
[2012-01-31 22:27:22] GPU 5 AMD Radeon HD 6900 Series  hardware monitoring enabled
[2012-01-31 22:27:22] Setting GPU 5 engine clock to 850
[2012-01-31 22:27:22] Setting GPU 5 memory clock to 725
[2012-01-31 22:27:22] 6 GPU devices detected

That's better (I think), but I tried to mine and it disabled a few cards then locked up    It's a remote rig so I'll have to look some more tomorrow.

[-ck]

from 2.2.1

Code:

[2012-02-01 00:16:55] Thread 1 being disabled                    

There's your answer. In 2.2.1, dynamic mode was made "lighter" on the desktop by using only one thread per GPU so that it is virtually not felt by the user. If you are on a dedicated mining rig, you need to give it a static intensity with something like -I 9 instead of leaving it dynamic.

[terroh8er]

Maybe this a stupid question, I don't know.. I tried searching quite a bit but didn't find anything regarding special settings. I just began mining again after a long break and I made the switch from guiminer to cgminer. My computer has 2x 5850's. With guiminer and the tags -v -w256, I get about 340mh/s per card with 875/300. With cgminer, I get 305-310mh/s. I'm running Catalyst 12.1 drivers. I've played with the intensity and checked the clock speed with Afterburner, and the cards are running at about 60*C each. Is there something I should be doing differently?

[jake262144]

12.1 drivers and Windows, lovely.
Try intensity = 9 && vectors = 4 && worksize = 64.

[P4man]

Seems like guiminer works better with 12.1 drivers than cgminer then.
FYI, my 5850 at 850/300 MHz gets a little over 350MH/s in cgminer with default settings. I am using catalyst 11.9.

[rcocchiararo]

from 2.2.1

Code:

[2012-02-01 00:16:55] Thread 1 being disabled                    

There's your answer. In 2.2.1, dynamic mode was made "lighter" on the desktop by using only one thread per GPU so that it is virtually not felt by the user. If you are on a dedicated mining rig, you need to give it a static intensity with something like -I 9 instead of leaving it dynamic.

buuu

Even so, on windows, when setting intensity to 9, 2.1.2 is 5 to 10 mhash faster (on linux with this "disable" it was much more noticeable).

My linux machine is a home server, and its almost never used as a desktop, but from time to time i VNC into it, and if i leave it at a high intensity, its unusable

--

Any pointers into having CGMINER startup automatically on linux ? i have a script in the "startup" folder in windows, but in linux, i found no way of having cgminer actually start either using a script in init.d or via startup applications (gui sesion automatically starts and logs in, i can run other miners via startup applications, but cgminer is my prefered one)

[-ck]

Even so, on windows, when setting intensity to 9, 2.1.2 is 5 to 10 mhash faster (on linux with this "disable" it was much more noticeable).

My linux machine is a home server, and its almost never used as a desktop, but from time to time i VNC into it, and if i leave it at a high intensity, its unusable

phatk110817.cl
Note the date on the kernel. It's unchanged since 17th August 2011. For static intensity hashing, it should be, for all intents and purposes, identical. Compare the .bin files generated and see if they're different. If so, something different is there in your setup making different  kernels (we already asceratained you're on the same sdk, unless you changed it up and then down again). If  not, then any difference just should not be there.

[cablepair]

Maybe this a stupid question, I don't know.. I tried searching quite a bit but didn't find anything regarding special settings. I just began mining again after a long break and I made the switch from guiminer to cgminer. My computer has 2x 5850's. With guiminer and the tags -v -w256, I get about 340mh/s per card with 875/300. With cgminer, I get 305-310mh/s. I'm running Catalyst 12.1 drivers. I've played with the intensity and checked the clock speed with Afterburner, and the cards are running at about 60*C each. Is there something I should be doing differently?

you need to remove 12.1 and install 11.9

its kind of a pain to do it in windows

you have to uninstall ALL AMD softwae
then physically delete the directories
then reboot into safe mode
use something like driver sweeper to remove the AMD/ATI drivers and all traces from the registry
than reboot into normal windows and reinstall 11.9

that will get your speed back

I have also tried using the vectors and work size work around for 5xxxx cards but you dont get all your speed back, and sometimes you have to keep your memory clocks high which makes the cards run hotter and use more electricity. IMO your better off just using 11.9 with the 2.5.xx sdk that comes with it

hope I was able to help