NothinG
|
|
May 20, 2012, 08:21:51 AM |
|
I'm attempting to compile my own cgminer.exe to disable OpenCL. I'm attempting to run this cgminer.exe in a Virtual Environment that doesn't have a GFX attached (using COM ports with BitForce (BFL Single)).
The problem after compiling with the flags of CFLAGS="-O2 -msse2" ./configure --disable-opencl --enable-bitforce and trying to run cgminer.exe (with all the lib's and *.cl's in the right spot), I get All devices disabled, cannot mine!.
Is there something I need to add to be able to run this in a non-enabled OpenCL environment?
[PS. Sorry, it's 3:30am and I'm having trouble articulating my words correctly.]
|
|
|
|
-ck (OP)
Legendary
Offline
Activity: 4256
Merit: 1645
Ruu \o/
|
|
May 20, 2012, 08:23:53 AM |
|
I'm attempting to compile my own cgminer.exe to disable OpenCL. I'm attempting to run this cgminer.exe in a Virtual Environment that doesn't have a GFX attached (using COM ports with BitForce (BFL Single)).
The problem after compiling with the flags of CFLAGS="-O2 -msse2" ./configure --disable-opencl --enable-bitforce and trying to run cgminer.exe (with all the lib's and *.cl's in the right spot), I get All devices disabled, cannot mine!.
Is there something I need to add to be able to run this in a non-enabled OpenCL environment?
[PS. Sorry, it's 3:30am and I'm having trouble articulating my words correctly.]
Tell it where the BFL is as the windows version of cgminer can't detect them automatically.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
NothinG
|
|
May 20, 2012, 08:26:59 AM |
|
I'm attempting to compile my own cgminer.exe to disable OpenCL. I'm attempting to run this cgminer.exe in a Virtual Environment that doesn't have a GFX attached (using COM ports with BitForce (BFL Single)).
The problem after compiling with the flags of CFLAGS="-O2 -msse2" ./configure --disable-opencl --enable-bitforce and trying to run cgminer.exe (with all the lib's and *.cl's in the right spot), I get All devices disabled, cannot mine!.
Is there something I need to add to be able to run this in a non-enabled OpenCL environment?
[PS. Sorry, it's 3:30am and I'm having trouble articulating my words correctly.]
Tell it where the BFL is as the windows version of cgminer can't detect them automatically. When running the cgminer.exe, I created a .bat file with the following: cgminer -o http://[removed] -u [removed] -p [removed] -S COM3 [EDIT]: Sorry, found out I was using the BFL Single on another CMD window. [Edit2]: http://www.sendspace.com/file/xcls73 <This is the build I'm using for my virtual servers.
|
|
|
|
jddebug
|
|
May 20, 2012, 08:40:46 AM |
|
Has anyone compiled a cgminer that will run on Raspberry Pi?
|
|
|
|
dave3
|
|
May 20, 2012, 12:15:52 PM |
|
I also compiled a version of cgminer 2.4.1 for windows 7 so I could disable opencl, since I have Intel integrated graphics without opencl support, and the prebuilt windows binary won't run on my system.
I notice the executable file size is different, and the dll file sizes, and the dll's included are different as well.
Do you know if the included instructions for compiling on windows is up to date? Or are the differences expected?
prebuilt windows binary:
05/06/2012 08:52 PM 289,792 cgminer.exe 02/23/2012 08:06 PM 249,344 libcurl-4.dll 05/20/2012 06:04 PM 87,054 libpdcurses.dll 04/18/2012 11:00 AM 177,207 libusb-1.0.dll 02/23/2012 08:06 PM 68,096 pthreadGC2.dll
self-compiled with "--disable-opencl --disable-adl --enable-bitforce":
05/20/2012 05:45 PM 690,888 cgminer.exe 05/20/2012 05:46 PM 615,424 libcurl.dll 05/20/2012 05:46 PM 1,551,973 libeay32.dll 05/20/2012 05:47 PM 279,955 libidn-11.dll 05/20/2012 05:48 PM 148,760 libpdcurses.dll 05/20/2012 05:48 PM 352,405 libssl32.dll 05/20/2012 05:48 PM 94,300 pthreadGC2.dll
I should receive my BFL singles soon, so I'll be able to test it more then.
|
|
|
|
-ck (OP)
Legendary
Offline
Activity: 4256
Merit: 1645
Ruu \o/
|
|
May 20, 2012, 12:22:08 PM |
|
The windows binaries I create are generated on a fairly static unchanged windows virtual machine. Any updated installation you try to build from will end up being different so that is no surprise at all, and perfectly expected.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
dave3
|
|
May 20, 2012, 12:31:28 PM |
|
Thanks.
|
|
|
|
ddd1
|
|
May 20, 2012, 02:04:20 PM |
|
I really enjoy the program, stable and nice Is there a way to reset to 0 all the stats without having to close cgminer? Stats are shown in cgminer directly when running I mean the 2 row of stats: <5s>: xxx <avg>: xxx Mh/s || Q:xxx A:xxx ............ and so on ......
|
|
|
|
NothinG
|
|
May 20, 2012, 06:39:21 PM |
|
The windows binaries I create are generated on a fairly static unchanged windows virtual machine. Any updated installation you try to build from will end up being different so that is no surprise at all, and perfectly expected.
I was going to include the other files (dll's and cl's), but I didn't know the rules or licenses so I just shared the cgminer.exe.
|
|
|
|
-ck (OP)
Legendary
Offline
Activity: 4256
Merit: 1645
Ruu \o/
|
|
May 20, 2012, 10:11:48 PM |
|
I really enjoy the program, stable and nice Is there a way to reset to 0 all the stats without having to close cgminer? Stats are shown in cgminer directly when running I mean the 2 row of stats: <5s>: xxx <avg>: xxx Mh/s || Q:xxx A:xxx ............ and so on ...... Only with the restart command from the menu.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
ddd1
|
|
May 21, 2012, 06:54:57 AM |
|
I really enjoy the program, stable and nice Is there a way to reset to 0 all the stats without having to close cgminer? Stats are shown in cgminer directly when running I mean the 2 row of stats: <5s>: xxx <avg>: xxx Mh/s || Q:xxx A:xxx ............ and so on ...... Only with the restart command from the menu. "[C]gminer restart" you mean? I tried that and it just turned CGmienr off. On another note, seems I have a wierd problem: I think my "Card 1" might be too overclocked? Something is funky: "Card 1": 663mhash | A: 557 R:16 HW:2 8.83/m I:7 "Card 2": 630mhash | A: 560 R: 3 HW:0 8.83/m I:9 So card one gives 33mhash more but less shares?! Both cards have 100% load and "Card 1" is also primary connected to a display on windows 7.
|
|
|
|
-ck (OP)
Legendary
Offline
Activity: 4256
Merit: 1645
Ruu \o/
|
|
May 21, 2012, 06:59:56 AM |
|
I really enjoy the program, stable and nice Is there a way to reset to 0 all the stats without having to close cgminer? Stats are shown in cgminer directly when running I mean the 2 row of stats: <5s>: xxx <avg>: xxx Mh/s || Q:xxx A:xxx ............ and so on ...... Only with the restart command from the menu. "[C]gminer restart" you mean? I tried that and it just turned CGmienr off. On another note, seems I have a wierd problem: I think my "Card 1" might be too overclocked? Something is funky: "Card 1": 663mhash | A: 557 R:16 HW:2 8.83/m I:7 "Card 2": 630mhash | A: 560 R: 3 HW:0 8.83/m I:9 So card one gives 33mhash more but less shares?! Both cards have 100% load and "Card 1" is also primary connected to a display on windows 7. Restart works when I test it. I don't know how you start it but presumably this is a windows issue that it's not restarting for you. Maybe you need to start it from a dos prompt and not a .bat file (dunno much about windows). Card reliability is entirely random, even from the same manufacturer and the same batch, they take different amounts of overclock safely. Some will just plain crash when overclocked too much, some will have glitches in the form of hardware errors at overclocks below the crash level. As for accepted shares, this is hash rate * luck. Each card will encounter different luck so this is not unusual at all.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
ddd1
|
|
May 21, 2012, 08:18:02 AM |
|
I really enjoy the program, stable and nice Is there a way to reset to 0 all the stats without having to close cgminer? Stats are shown in cgminer directly when running I mean the 2 row of stats: <5s>: xxx <avg>: xxx Mh/s || Q:xxx A:xxx ............ and so on ...... Only with the restart command from the menu. "[C]gminer restart" you mean? I tried that and it just turned CGmienr off. On another note, seems I have a wierd problem: I think my "Card 1" might be too overclocked? Something is funky: "Card 1": 663mhash | A: 557 R:16 HW:2 8.83/m I:7 "Card 2": 630mhash | A: 560 R: 3 HW:0 8.83/m I:9 So card one gives 33mhash more but less shares?! Both cards have 100% load and "Card 1" is also primary connected to a display on windows 7. Restart works when I test it. I don't know how you start it but presumably this is a windows issue that it's not restarting for you. Maybe you need to start it from a dos prompt and not a .bat file (dunno much about windows). Card reliability is entirely random, even from the same manufacturer and the same batch, they take different amounts of overclock safely. Some will just plain crash when overclocked too much, some will have glitches in the form of hardware errors at overclocks below the crash level. As for accepted shares, this is hash rate * luck. Each card will encounter different luck so this is not unusual at all. Is there a way to measure rate * luck? I guess the card might be stable then even as it gave less shares? Now: "Card 1" A: 1304 R:65 HW:2 U: 8.86 I:7 "Card 2" A: 1268 R:28 HW:0 U: 8.58 I:9 Seems like wery few HW but the reject rate is 2-3% more on "Card 1"
|
|
|
|
-ck (OP)
Legendary
Offline
Activity: 4256
Merit: 1645
Ruu \o/
|
|
May 21, 2012, 09:52:29 AM |
|
As for accepted shares, this is hash rate * luck. Each card will encounter different luck so this is not unusual at all.
Is there a way to measure rate * luck? I guess the card might be stable then even as it gave less shares? Now: "Card 1" A: 1304 R:65 HW:2 U: 8.86 I:7 "Card 2" A: 1268 R:28 HW:0 U: 8.58 I:9 Seems like wery few HW but the reject rate is 2-3% more on "Card 1" You are thinking about this backwards. The way to measure rate * luck IS the utility rate. The only hint telling you what rate the card is hashing at is... the hashrate. Rejects are also purely random, but if you're running at higher intensity, it holds onto results for (slightly) longer so they are more likely to come back stale.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
demkd
|
|
May 22, 2012, 06:53:09 AM |
|
I run cgminer with -I 2 parameter, but this parameter is ignored and used intensity in config (since v2.3.4). How can I override intensity for new versions of cgminer without changing config file?
|
|
|
|
check_status
Full Member
Offline
Activity: 196
Merit: 100
Web Dev, Db Admin, Computer Technician
|
|
May 22, 2012, 06:54:03 AM Last edit: May 22, 2012, 08:49:54 AM by check_status |
|
OK, so I get this error: ./cgminer: error while loading shared libraries: libOpenCL.so.1: cannot open shared object file: No such file or directory I'm trying out SDK 2.1 so I search this thread and find: Do a "find / -name libOpenCL.so.1"
then copying the file to cgminer's directory would probably the easiest...
Change to cgminers directory then do a "cp /path/to/file/libOpenCL.so.1 ." and start cgminer with ./cgminer $ find / -name libOpenCL.so.1 $
Apparently it doesn't exist. So I files > /opt/lib64/x86_64 to find libOpenCL.so Are they the same file? Why is it named -.1? What do I do to correct the issue so cgminer will churn? Edit: Neglected to mention, in case it's important, I unpacked v2.1 as described in Kano's toot for v2.4. P.S. AMD makes you jump through hoops now to get the older SDK's. http://download2-developer.amd.com/amd/APPSDK/AMD-APP-SDK-v2.4-lnx64.tgz" "/amd/Stream20GA/ati-stream-sdk-v2.1-lnx64.tgz " "/amd/Stream20GA/icd-registration.tgz
|
For Bitcoin to be a true global currency the value of BTC needs always to rise. If BTC became the global currency & money supply = 100 Trillion then ⊅1.00 BTC = $4,761,904.76. P2Pool Server List | How To's and Guides Mega List | 1 EndfedSryGUZK9sPrdvxHntYzv2EBexGA
|
|
|
check_status
Full Member
Offline
Activity: 196
Merit: 100
Web Dev, Db Admin, Computer Technician
|
|
May 22, 2012, 06:58:42 AM |
|
I run cgminer with -I 2 parameter, but this parameter is ignored and used intensity in config (since v2.3.4). How can I override intensity for new versions of cgminer without changing config file?
You have to move the config file out of the .cgminer directory, if your using linux, or change it in the config file. Alternatively, you can try adjusting it while it is running by choosing 'G' then 'C' or 'S' for change settings, then 'I' for Intensity, then enter the number for your desired Intensity and press enter. Hit any key to return to polling screen.
|
For Bitcoin to be a true global currency the value of BTC needs always to rise. If BTC became the global currency & money supply = 100 Trillion then ⊅1.00 BTC = $4,761,904.76. P2Pool Server List | How To's and Guides Mega List | 1 EndfedSryGUZK9sPrdvxHntYzv2EBexGA
|
|
|
kano
Legendary
Offline
Activity: 4592
Merit: 1851
Linux since 1997 RedHat 4
|
|
May 22, 2012, 09:38:27 AM |
|
I run cgminer with -I 2 parameter, but this parameter is ignored and used intensity in config (since v2.3.4). How can I override intensity for new versions of cgminer without changing config file?
As stated previously, the issue is that you have it in your default cgminer.conf file. To change it so that it says changed, you either have to save settings to the default file, or edit the default cgminer.conf file. To save your current settings into the default file, press "S", "W" then Enter. N.B. if you save your current settings then you will not need to supply any settings when you run cgminer If, on the other hand, you want to be able to specify a setting on the command line, then you will have to remove it from the default cgminer.conf file
|
|
|
|
joyyen
Member
Offline
Activity: 99
Merit: 10
MMM EXTRA - THE RIGHT STEP TOWARDS THE GOAL
|
|
May 22, 2012, 11:23:31 AM |
|
I have run my CGminer about 7 days, and i have about 11 Rigs with 5x 5850 and until today morning i found that some of my CGminer Freeze and stop sending share and i found some funny figure when i freeze something like "LW:50" and high figure around beside "LW"
where some of my CGminer still running fine thich is "LW:0"
you can see that on top of the cgminer !
anyone pls help
i cannot provide screen shot because it is not convenient and it is far from my house to warehouse
so anyone pls help if it happen again i will get the screen shot
sry for my English !
|
[Join MMM and get up to 100% per month]
|
|
|
-ck (OP)
Legendary
Offline
Activity: 4256
Merit: 1645
Ruu \o/
|
|
May 22, 2012, 11:56:50 AM |
|
I have run my CGminer about 7 days, and i have about 11 Rigs with 5x 5850 and until today morning i found that some of my CGminer Freeze and stop sending share and i found some funny figure when i freeze something like "LW:50" and high figure around beside "LW"
where some of my CGminer still running fine thich is "LW:0"
you can see that on top of the cgminer !
anyone pls help
i cannot provide screen shot because it is not convenient and it is far from my house to warehouse
so anyone pls help if it happen again i will get the screen shot
sry for my English !
The LW value is almost certainly completely unrelated. If it crashes at approximately 7 days, then you are being hit by the ATI Display Library crashing after a week bug that happens only on windows. Try starting cgminer with --no-restart . You will lose temperature and/or fanspeed monitoring after a week but it at least wont crash.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
|