Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[naeme18720]

Hi
Are i can mining eth in windows xp 64bit???

If you have a GPU such as AMD 4XX/5xx or GTX-10XX you can mine with Claymore. You cannot CPU mine ETh

Thanks
I have gpu rx....
but drivers for gpu rx470 4gb in windows xp 64bit where??

[siampumpkin]

Hi
Are i can mining eth in windows xp 64bit???

If you have a GPU such as AMD 4XX/5xx or GTX-10XX you can mine with Claymore. You cannot CPU mine ETh

Thanks
I have gpu rx....
but drivers for gpu rx470 4gb in windows xp 64bit where??

All the drivers you need are the ones from AMD website.  Follow the instructions on the first page of this thread for instructions on downloading, installing and running the miner.

[naeme18720]

Hi
Are i can mining eth in windows xp 64bit???

If you have a GPU such as AMD 4XX/5xx or GTX-10XX you can mine with Claymore. You cannot CPU mine ETh

Thanks
I have gpu rx....
but drivers for gpu rx470 4gb in windows xp 64bit where??

All the drivers you need are the ones from AMD website.  Follow the instructions on the first page of this thread for instructions on downloading, installing and running the miner.

Ok this site http://support.amd.com
Thanks very much for help to me
For bios rx470 4gb sapphire
This link??? I used
http://1stminingrig.com/sapphire-rx-470-nitro-oc-4gb-bios-flash-mod-tutorial-hynix-elpida-samsung-micron/

[siampumpkin]

Hi
Are i can mining eth in windows xp 64bit???

If you have a GPU such as AMD 4XX/5xx or GTX-10XX you can mine with Claymore. You cannot CPU mine ETh

Thanks
I have gpu rx....
but drivers for gpu rx470 4gb in windows xp 64bit where??

All the drivers you need are the ones from AMD website.  Follow the instructions on the first page of this thread for instructions on downloading, installing and running the miner.

Ok this site http://support.amd.com
Thanks very much for help to me
For bios rx470 4gb sapphire
This link??? I used
http://1stminingrig.com/sapphire-rx-470-nitro-oc-4gb-bios-flash-mod-tutorial-hynix-elpida-samsung-micron/

If you are going to flash your card make sure the bios is for the same type of memory you have in your card. You can check this with GPUZ. Also you will need to patch the drivers for them to work in Windows with a modified bios because it will not have the correct bios signature. You can find information on that Here https://www.techpowerup.com/228536/amd-bios-signature-check-re-enabled-with-relive-locks-out-polaris-bios-modders

[okiagr]

Does anyone know what the most common/probable causes are for a gpu hanging?  One of my RX580s hangs after about 15 or 20 minutes every time.  Very frustrating.

This subject has to have a dedicated thread as it occurs to many.

Try:
- add -gser 2 and -eres to the bat file
- check cables, risers, physical connection
- ddu drivers and reinstall
- probably you overclocked too much, try lower values (even the same, the cards might need different values)
- check psu, probably the power is not enough
- check voltage, probably it's too low for that card, try to increase
- reload default bios for the card
- reinstall windows
- change pcie generation to 2

[nnsltlh]

Help me, My card R9 270 2GB not work with tool Claymore. show me how to fix this, pls. tks sp.

http://i228.photobucket.com/albums/ee102/nnsltlh/error%20claymore.jpg

[Killcycle]

Help me, My card R9 270 2GB not work with tool Claymore. show me how to fix this, pls. tks sp.

http://i228.photobucket.com/albums/ee102/nnsltlh/error%20claymore.jpg

STRG + F on the first side about 2GB cards.
Less GPU RAM...

[npittas]

Help me, My card R9 270 2GB not work with tool Claymore. show me how to fix this, pls. tks sp.

http://i228.photobucket.com/albums/ee102/nnsltlh/error%20claymore.jpg

2Gb Cards no longer work with ETH. Either try a coin with DAG<2Gb or use another GPU

[fluxdane]

Any evga 1060 ftw or sc user can share their setting ? I can't pass 24.5 Mh/s

I have an 8 card rig of EVGA 06G-P4-6161-KR GeForce GTX 1060 6GB (single fan), since Claymore 9.7 I´m getting a max hash of 25,4mh/s per card (solo eth mining).

My settings:
Power Limit: 65%
Temp Limit: 63 Cº
Core Clock: 145 Mhz
Memory Clock: 1000 Mhz
Fan: 90%

This whole rig pulls 700w. Cards temp is between 55ºC - 62ºC. Running stable 11 days now with abnove settings.

Hope it helps

[ZenFr]

Any evga 1060 ftw or sc user can share their setting ? I can't pass 24.5 Mh/s

I have an 8 card rig of EVGA 06G-P4-6161-KR GeForce GTX 1060 6GB (single fan), since Claymore 9.7 I´m getting a max hash of 25,4mh/s per card (solo eth mining).

My settings:
Power Limit: 65%
Temp Limit: 63 Cº
Core Clock: 145 Mhz
Memory Clock: 1000 Mhz
Fan: 90%

This whole rig pulls 700w. Cards temp is between 55ºC - 62ºC. Running stable 11 days now with abnove settings.

Hope it helps

Your 25.4 mh/s is very high for a simple GTX 1060 6 GB.
It is approx what I have with my GTX 1070...

What do you chooe 90% for the fan : it is very high. Because there is only one fan in your 1060 ? With 2 fans, you would choose the same setting, 90 % ?

[greatania]

Hi folks, am mining solo ETC and for five days now i have the same target in Claymore 9.5,

july 14: Current ETH share target: 0x000000016e80fe03 (diff: 3000MH), epoch #136

july 19: Current ETH share target: 0x000000016e80fe03 (diff: 3000MH), epoch #137

I mean here is same numbers for the share target <0x000000016e80fe03> with different epoch #

This is normal ?
Thank You

[fluxdane]

Any evga 1060 ftw or sc user can share their setting ? I can't pass 24.5 Mh/s

I have an 8 card rig of EVGA 06G-P4-6161-KR GeForce GTX 1060 6GB (single fan), since Claymore 9.7 I´m getting a max hash of 25,4mh/s per card (solo eth mining).

My settings:
Power Limit: 65%
Temp Limit: 63 Cº
Core Clock: 145 Mhz
Memory Clock: 1000 Mhz
Fan: 90%

This whole rig pulls 700w. Cards temp is between 55ºC - 62ºC. Running stable 11 days now with abnove settings.

Hope it helps

Your 25?4 mh/s is very high for a simple GTX 1060 6 GB.
It is approx what I have with my GTX 1070...

What do you chooe 90% for the fan : it is very high. Because there is only one fan in your 1060 ? With 2 fans, you would choose the same setting, 90 % ?

Yes 90% fan speed is due to the single fan. I have another AMD rig with dual fans on the cards, and these run at 55% speed, the more fans the less fan speed required, and the less noise you  will have.
1070s should reach 29mh/s if I remember correctly.

[Commie]

Your 25.4 mh/s is very high for a simple GTX 1060 6 GB.
It is approx what I have with my GTX 1070...

Double check your settings. 1070 should be close to 30 even without severe overclocking. On my 970's I get 22-23 Mh/s and cards are cold (<60C).

[naeme18720]

Hi
Are i can mining eth in windows xp 64bit???

If you have a GPU such as AMD 4XX/5xx or GTX-10XX you can mine with Claymore. You cannot CPU mine ETh

Thanks
I have gpu rx....
but drivers for gpu rx470 4gb in windows xp 64bit where??

All the drivers you need are the ones from AMD website.  Follow the instructions on the first page of this thread for instructions on downloading, installing and running the miner.

Ok this site http://support.amd.com
Thanks very much for help to me
For bios rx470 4gb sapphire
This link??? I used
http://1stminingrig.com/sapphire-rx-470-nitro-oc-4gb-bios-flash-mod-tutorial-hynix-elpida-samsung-micron/

If you are going to flash your card make sure the bios is for the same type of memory you have in your card. You can check this with GPUZ. Also you will need to patch the drivers for them to work in Windows with a modified bios because it will not have the correct bios signature. You can find information on that Here https://www.techpowerup.com/228536/amd-bios-signature-check-re-enabled-with-relive-locks-out-polaris-bios-modders

Ok
Very thanks but i not see nothing for my gpu bios or other things
Sapphire rx470 4gb nitro oc

[ryderbg]

Hi guys! I just made new rig with 5 cards MSI RX580 8gb and there is problem with the cards which are connected to PCIEx16 via extender/riser Ver007. But the cards connected to PCIEx4 are ok. The problem is that the cards connected to PCIEx16 are mining with 4mh/s. Any ideas what to do?

[P00P135]

Hi guys! I just made new rig with 5 cards MSI RX580 8gb and there is problem with the cards which are connected to PCIEx16 via extender/riser Ver007. But the cards connected to PCIEx4 are ok. The problem is that the cards connected to PCIEx16 are mining with 4mh/s. Any ideas what to do?

Plug a monitor into them and make sure MSI afterburner recognizes them and is OCing them properly.

[greatania]

Know anybody what is <ETH current share target> ? Could be difficulty, that sets from the pool? Thank you

[ZenFr]

Any evga 1060 ftw or sc user can share their setting ? I can't pass 24.5 Mh/s

I have an 8 card rig of EVGA 06G-P4-6161-KR GeForce GTX 1060 6GB (single fan), since Claymore 9.7 I´m getting a max hash of 25,4mh/s per card (solo eth mining).

My settings:
Power Limit: 65%
Temp Limit: 63 Cº
Core Clock: 145 Mhz
Memory Clock: 1000 Mhz
Fan: 90%

This whole rig pulls 700w. Cards temp is between 55ºC - 62ºC. Running stable 11 days now with abnove settings.

Hope it helps

Your 25?4 mh/s is very high for a simple GTX 1060 6 GB.
It is approx what I have with my GTX 1070...

What do you chooe 90% for the fan : it is very high. Because there is only one fan in your 1060 ? With 2 fans, you would choose the same setting, 90 % ?

Yes 90% fan speed is due to the single fan. I have another AMD rig with dual fans on the cards, and these run at 55% speed, the more fans the less fan speed required, and the less noise you  will have.
1070s should reach 29mh/s if I remember correctly.

Thanks for the reply about single/double fan : it's interesting to know.

[ZenFr]

Your 25.4 mh/s is very high for a simple GTX 1060 6 GB.
It is approx what I have with my GTX 1070...

Double check your settings. 1070 should be close to 30 even without severe overclocking. On my 970's I get 22-23 Mh/s and cards are cold (<60C).

I forgot to tell the power consumption of all my 1070s are limited to they minimum (100 W for 2 and 115 W for 2 others).
But even with these low consumptions (for GTX 1070), my ratio hashrate/consumption is under this example with 1060.
I can't use AfterBurner because I'm with Linux (but I can overclock a little bit inside the driver)

[Commie]

Double check your settings. 1070 should be close to 30 even without severe overclocking. On my 970's I get 22-23 Mh/s and cards are cold (<60C).

I forgot to tell the power consumption of all my 1070s are limited to they minimum (100 W for 2 and 115 W for 2 others).
But even with these low consumptions (for GTX 1070), my ratio hashrate/consumption is under this example with 1060.
I can't use AfterBurner because I'm with Linux (but I can overclock a little bit inside the driver)

Not familiar with Linux so can't say anything on that, but it looks like your cards are doing stock hashrate with big power savings. If you're happy with that just leave it as it is, your cards will work for years