ZenFr
Legendary
Offline
Activity: 1260
Merit: 1046
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2017, 12:04:20 PM |
|
9.7 gave my 1070 card good boost: from 29 MH/s to 30 MH/s, or from 146 to 151 MH/s at the same OC settings.
Yes, but what is your power consumption ? 100/115 W or 150 W (standard) ? I am also with the 9.7 version of Claymore.
|
|
|
|
brownfly
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2017, 12:39:34 PM |
|
140 Watt per unit
|
|
|
|
mzeoatrakeb
Newbie
Offline
Activity: 25
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2017, 12:43:02 PM |
|
Hello guys, I have GIGABYTE Radeon RX 580 GAMING 8GB
Its def give 21 mhs after flash 26mhs.
can someone help ? i would like got 28-30 mhs.
what I Did:
in flash/Bios 24 Mhs Memory
MHz Mv 300 1000 1000 1000 2000 1000
Mhz | Timing Strap
1750 copy 2000 replace.
in flash/Bios 26 mhs Memory
MHz Mv 300 900 1000 900 2000 900
Mhz | Timing Strap
1750 copy 2000 replace.
any ideas to get 28-30 mhs?
|
|
|
|
yany
Newbie
Offline
Activity: 31
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2017, 12:59:05 PM |
|
Hello guys, I have GIGABYTE Radeon RX 580 GAMING 8GB
Its def give 21 mhs after flash 26mhs.
can someone help ? i would like got 28-30 mhs.
what I Did:
in flash/Bios 24 Mhs Memory
MHz Mv 300 1000 1000 1000 2000 1000
Mhz | Timing Strap
1750 copy 2000 replace.
in flash/Bios 26 mhs Memory
MHz Mv 300 900 1000 900 2000 900
Mhz | Timing Strap
1750 copy 2000 replace.
any ideas to get 28-30 mhs?
Increase RAM clock to 2200 (or close to that, what is stable for you) Decrease GPU: 1200 MHz Decrease TDP: -10% With bios mod, it should give you 28-29-30 depending on the driver/miner version. (I suggest latest available from both + Creative Update for Windows)
|
|
|
|
mzeoatrakeb
Newbie
Offline
Activity: 25
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2017, 01:38:38 PM Last edit: July 19, 2017, 01:51:24 PM by mzeoatrakeb |
|
Hello guys, I have GIGABYTE Radeon RX 580 GAMING 8GB
Its def give 21 mhs after flash 26mhs.
can someone help ? i would like got 28-30 mhs.
what I Did:
in flash/Bios 24 Mhs Memory
MHz Mv 300 1000 1000 1000 2000 1000
Mhz | Timing Strap
1750 copy 2000 replace.
in flash/Bios 26 mhs Memory
MHz Mv 300 900 1000 900 2000 900
Mhz | Timing Strap
1750 copy 2000 replace.
any ideas to get 28-30 mhs?
Increase RAM clock to 2200 (or close to that, what is stable for you) Decrease GPU: 1200 MHz Decrease TDP: -10% With bios mod, it should give you 28-29-30 depending on the driver/miner version. (I suggest latest available from both + Creative Update for Windows) you got same card? miner 9.7 driver: 17.1.1
|
|
|
|
chronek
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 273
Merit: 250
BD People Are Legend
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2017, 01:39:03 PM |
|
Know anybody what is <ETH current share target> ? Could be difficulty, that sets from the pool? Thank you
Yes, a pool sets a lower difficulty (target) than the network difficulty in order for your miner to easier find shares, even if that share not solve block it validate that you working on sollution. Usual that difficulty is based on the hashrate you report to the pool.
|
|
|
|
sir4o
Newbie
Offline
Activity: 67
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2017, 01:45:26 PM |
|
when this programer will make an andoid app to allow us monitor our rigs ? also Eth Man when will be able to work through internet ,not only through local lan???
Hello! 1. Allready app from Play Market - Claymore\Optiminer Monitor from BCMob 2. You can get static IP from your ISP and watch your rigs from Internet. 1st thanks for ur replay 2nd : i`m already using this app since few weeks and it have a bug in very important option ( check miners work in the background ) this option when i change it to (on ) and set the time interval to 5 min for example when i leave the app it stop working in the background and when i open it i found this option is (Of) so i have to check manualy Yes, same issue here. Ive contacted with developer, but he couldnt confirm it on his side. So our conversation died quickly. Pitty. check if your phone OS has some sort of process optimizations and then exclude the app from killing cycles
|
|
|
|
sir4o
Newbie
Offline
Activity: 67
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2017, 01:55:14 PM |
|
I'm running all nvidia, a mix of 1060,1070,1080 on different miners, each miner exhibits the same behavior.
Here's my batch file to start it all up... setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100
You can erase this section : it is only for AMD GPUs. I'm with AMD Rigs and also without these lines ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
|
|
|
ozzy1926
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2017, 02:06:31 PM |
|
Any evga 1060 ftw or sc user can share their setting ? I can't pass 24.5 Mh/s
I have an 8 card rig of EVGA 06G-P4-6161-KR GeForce GTX 1060 6GB (single fan), since Claymore 9.7 I´m getting a max hash of 25,4mh/s per card (solo eth mining). My settings: Power Limit: 65% Temp Limit: 63 Cº Core Clock: 145 Mhz Memory Clock: 1000 Mhz Fan: 90% This whole rig pulls 700w. Cards temp is between 55ºC - 62ºC. Running stable 11 days now with abnove settings. Hope it helps Thanks for the setting but did you checked the watt meter from wall because I get 720-730 with 7 cards
|
|
|
|
okiagr
Newbie
Offline
Activity: 10
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2017, 02:46:47 PM |
|
Hello guys, I have GIGABYTE Radeon RX 580 GAMING 8GB
Its def give 21 mhs after flash 26mhs.
can someone help ? i would like got 28-30 mhs.
what I Did:
in flash/Bios 24 Mhs Memory
MHz Mv 300 1000 1000 1000 2000 1000
Mhz | Timing Strap
1750 copy 2000 replace.
in flash/Bios 26 mhs Memory
MHz Mv 300 900 1000 900 2000 900
Mhz | Timing Strap
1750 copy 2000 replace.
any ideas to get 28-30 mhs?
Increase RAM clock to 2200 (or close to that, what is stable for you) Decrease GPU: 1200 MHz Decrease TDP: -10% With bios mod, it should give you 28-29-30 depending on the driver/miner version. (I suggest latest available from both + Creative Update for Windows) You cannot get 29-30 anymore with this card. You are 2 months late. That's because of the hashrate dropping for AMD cards on each epoch. The actual rate now is somewhere 27+. If someone else has better hashrate for this card, please share the bios.
|
|
|
|
yany
Newbie
Offline
Activity: 31
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2017, 03:00:44 PM |
|
Hello guys, I have GIGABYTE Radeon RX 580 GAMING 8GB
Its def give 21 mhs after flash 26mhs.
can someone help ? i would like got 28-30 mhs.
what I Did:
in flash/Bios 24 Mhs Memory
MHz Mv 300 1000 1000 1000 2000 1000
Mhz | Timing Strap
1750 copy 2000 replace.
in flash/Bios 26 mhs Memory
MHz Mv 300 900 1000 900 2000 900
Mhz | Timing Strap
1750 copy 2000 replace.
any ideas to get 28-30 mhs?
Increase RAM clock to 2200 (or close to that, what is stable for you) Decrease GPU: 1200 MHz Decrease TDP: -10% With bios mod, it should give you 28-29-30 depending on the driver/miner version. (I suggest latest available from both + Creative Update for Windows) You cannot get 29-30 anymore with this card. You are 2 months late. That's because of the hashrate dropping for AMD cards on each epoch. The actual rate now is somewhere 27+. If someone else has better hashrate for this card, please share the bios. Sure, you are right, I forgot the hashrate drop. It was 3 weeks ago, I helped my friend to calibrate the settings. @mzeoatrakeb: I use GTX 1070 cards. (see signature for details)
|
|
|
|
frode88
Newbie
Offline
Activity: 41
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2017, 03:15:05 PM |
|
Hi. I have one Q. there will be hash drop for GTX 1070? or only hash drop for AMD? thank you.
|
|
|
|
brownfly
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2017, 03:44:47 PM |
|
9.7 gave my 1070 card good boost: from 29 MH/s to 30 MH/s, or from 146 to 151 MH/s at the same OC settings.
Yes, but what is your power consumption ? 100/115 W or 150 W (standard) ? I am also with the 9.7 version of Claymore. update: I have changed OC to -100 for main clock and +700 for RAM clock. power consumption went down to 120W per unit and hashrate is even better: 152 MH/s vs 151 Mh/s before (dual mining, DCR rate is 1,530 MH/s). Hopefully it will be stable enough.
|
|
|
|
vapourminer
Legendary
Offline
Activity: 4424
Merit: 3839
what is this "brake pedal" you speak of?
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2017, 03:58:27 PM Last edit: July 19, 2017, 04:52:41 PM by vapourminer |
|
any ideas to get 28-30 mhs?
Increase RAM clock to 2200 (or close to that, what is stable for you) Decrease GPU: 1200 MHz Decrease TDP: -10% With bios mod, it should give you 28-29-30 depending on the driver/miner version. (I suggest latest available from both + Creative Update for Windows) You cannot get 29-30 anymore with this card. You are 2 months late. That's because of the hashrate dropping for AMD cards on each epoch. The actual rate now is somewhere 27+. If someone else has better hashrate for this card, please share the bios. yes you can. my powercolor 470/4 samsung gets 29.3. just strapped 1750 upward. 1040/2100 clocks. my msi 470/4 with samsung gets 27 with same settings. not sure why the msi is lower. kvm is plugged into the powercolor also this is dual mining sia -dcri 15 setting. each is doing ~400 mhs sia. so all i did is the memory straps, nothing else in the bios was touched except i raised the power limit from 5 to 25 on the powercolor. it is possible the 29.3 mhs rate is an error possibly? however rig is stable for weeks at a time, and that card shows no artifacts when displaying the desktop. EDIT: nevermind, wrong card.
|
|
|
|
mzeoatrakeb
Newbie
Offline
Activity: 25
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2017, 04:00:55 PM |
|
with samsung pcu its not problem my amd has Hynix pcu...
|
|
|
|
okiagr
Newbie
Offline
Activity: 10
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2017, 04:12:04 PM |
|
any ideas to get 28-30 mhs?
Increase RAM clock to 2200 (or close to that, what is stable for you) Decrease GPU: 1200 MHz Decrease TDP: -10% With bios mod, it should give you 28-29-30 depending on the driver/miner version. (I suggest latest available from both + Creative Update for Windows) You cannot get 29-30 anymore with this card. You are 2 months late. That's because of the hashrate dropping for AMD cards on each epoch. The actual rate now is somewhere 27+. If someone else has better hashrate for this card, please share the bios. yes you can. my powercolor 470/4 samsung gets 29.3. just strapped 1750 upward. 1040/2100 clocks. my msi 470/4 with samsung gets 27 with same settings. not sure why the msi is lower. kvm is plugged into the powercolor also this is dual mining sia -dcri 15 setting. each is doing ~400 mhs sia. so all i did is the memory straps, nothing else in the bios was touched except i raised the power limit from 5 to 25 on the powercolor. it is possible the 29.3 mhs rate is an error possibly? however rig is stable for weeks at a time, and that card shows no artifacts when displaying the desktop. He was talking about rx 580 Gigabyte with Hynix memory.
|
|
|
|
mzeoatrakeb
Newbie
Offline
Activity: 25
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2017, 04:15:53 PM |
|
can you share his bios?
|
|
|
|
br2459
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2017, 04:17:53 PM |
|
Hello all,
I am running a rig mix with 1 GTX 1070, 1 R9 380 and 1 RX480. I am using 16.9.2 since 480 is modded but for some reason I can't OC with AB nor does it show temps. in AB it just shows blank. Anyone else using a mixed rig and having this issue? I know what most of you will say, don't mix but this isn't exactly a permanent situation. I just had cards sitting around doing nothing so I wanted to at least get something out of them. Granted I am only losing about 5MH/s but that does add up until my hardware gets here next week.
|
|
|
|
vapourminer
Legendary
Offline
Activity: 4424
Merit: 3839
what is this "brake pedal" you speak of?
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2017, 04:52:02 PM |
|
He was talking about rx 580 Gigabyte with Hynix memory.
oh. derp. nevermind ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
lance04
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2017, 05:17:46 PM |
|
hmm i Running Claymore's miner for 8 hours on 4x R9 380 (non X) rig, the hash rate on miner shows 80 Mhash/sec, but on the pool (Etehrmine.org) it dropped from 75 Mhash down to 45 Mhash. I switched back to qtminer for a few hours and my pool hash rate returned to normal, so I rebooted the rig and tried the Claymore miner again and within a hour I seen the hash rate going down again. For now I switched back to qtminer.
|
|
|
|
|