Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Xazax310]

Hello all, I recently acquired a bunch of RX470s and was hoping to use Claymores 14.6 STRAPs but no luck. I need some help.
When I use -STRAP option the miner will apply STRAP 1 to GPU 0, then GPU 1, then the computer crashes and restarts. Everytime it doesnt matter what I do, voltages etc.

If I apply the STRAP to only GPU 0 it will work fine, however, if I apply it to GPU 1, 2, 3 etc even one other GPU instant crash and Windows reboots.

I'm at a total loss of what's causing it.

The miner works perfectly normal as long as I avoid the STRAP option. RXBOOST works perfectly fine.  

Seeking help or ideas!

Rig
13 RX470s
H110 Pro BTC+
G3930, 4GB RAM, 450w PSU
2400w DELTA PSU for cards
Windows 1903 Build(May release)
AMD 19.5.1 drivers

[dormancygrace]

Hi!  Can you make double memory kernels for gpus with enough ram?  Like it is done in PhoenixMiner?

[bperryman]

Is there any chance that you could tweak your Blake2b algorithm to allow for GlobalToken and TitleNetwork variants? I know they're very similar to old Sia.

[ngohungvi]

Can current graphics cards with 3G Vram mine ETH? (GTX 1060 3G , p106-090 3G,v.v...)
Thank you.

[Dr_Victor]

Can current graphics cards with 3G Vram mine ETH? (GTX 1060 3G , p106-090 3G,v.v...)
Thank you.

Unfortunately, no

[Xazax310]

Can current graphics cards with 3G Vram mine ETH? (GTX 1060 3G , p106-090 3G,v.v...)
Thank you.

No, ETH/ETC are over the 3GB DAG limit and can never mine ETH again. You can try other lower dag coins like CLO,UBQ,EXP, etc

[cryptomaxsun]

For mining Ethereum with the 480 card, which driver is better to use and which hashrate should be?

[Dr_Victor]

For mining Ethereum with the 480 card, which driver is better to use and which hashrate should be?

You can use the latest Adrenalin 2019 and get 31-33-35Mh.

[arianx]

tnx guys
now i get 33.3 per card
http://uupload.ir/files/5ztj_sgdsgd.jpg

[paceemail]

If I am understanding correctly people are seeing best results with the following for RX570/580

RXboost -1 and strap -1
Increase Core to around 1180,  memory at around 2050-2100
DDU and install latest AMD drivers

The last one is what I want to confirm as I am using 18.3.1? for some time and haven't had issues, so wanted to confirm before I DDU and reinstall on all rigs. Also I saw some mentions of 20GB virtual, I usually run 16 Minimum, did I miss something in release notes about upping this?

Thanks!

[lolzminer]

i have  a question i cant run the noromal batch file in admin since this new windows update where as before i could include -strap 1 and it would apply straps etc but now only way i caN ACTIVATE THE STRAPS IS WHEN I INSTALL THE DRIVER -DRIVER INSTALL OR JUST -STRAP 1 ON THE SECOND LAUNCHER THE 1 U HAVE TO RIGHT CLICK AND RUN AS ADMIN. but if i uninstall it so it comes out of test mode soon as i run normla the second launcher and i put -strap 1 it puts my minerback into test mode ? is it  abug or am i doing somethign wrong. ethereum miner claymore 14.6 and it wont allow me to apply the -rxboost 1 as it wont work without admin rights.

[quejo]

tnx guys
now i get 33.3 per card
http://uupload.ir/files/5ztj_sgdsgd.jpg

What cards and settings are you using?
Are you monitoring errors with hwinfo?

[arianx]

tnx guys
now i get 33.3 per card
http://uupload.ir/files/5ztj_sgdsgd.jpg

What cards and settings are you using?
Are you monitoring errors with hwinfo?

Rx580 SP
no errors

[MATHReX]

tnx guys
now i get 33.3 per card

Is it stable?
I have hynix memory RX580 cards.
Even at best settings, I'm getting  32MH/s per card but they are unstable, crashes after an hour or two.

[cryptomaxsun]

For mining Ethereum with the 480 card, which driver is better to use and which hashrate should be?

You can use the latest Adrenalin 2019 and get 31-33-35Mh.

what's wrong ? followed the advice and only 12 mh.
on the forks of ethereum 29 mh.

[Jonet]

i have  a question i cant run the noromal batch file in admin since this new windows update where as before i could include -strap 1 and it would apply straps etc but now only way i caN ACTIVATE THE STRAPS IS WHEN I INSTALL THE DRIVER -DRIVER INSTALL OR JUST -STRAP 1 ON THE SECOND LAUNCHER THE 1 U HAVE TO RIGHT CLICK AND RUN AS ADMIN. but if i uninstall it so it comes out of test mode soon as i run normla the second launcher and i put -strap 1 it puts my minerback into test mode ? is it  abug or am i doing somethign wrong. ethereum miner claymore 14.6 and it wont allow me to apply the -rxboost 1 as it wont work without admin rights.

Windows has to be in test mode because the driver is not signed. If you uninstall the driver to get windows out of test mode you cannot use -strap or -rxboost. You don't have to run the normal batch file with admin rights, only when you install/uninstall driver or set AMD driver to compute (y).

[fredeq]

For mining Ethereum with the 480 card, which driver is better to use and which hashrate should be?

You can use the latest Adrenalin 2019 and get 31-33-35Mh.

what's wrong ? followed the advice and only 12 mh.
on the forks of ethereum 29 mh.

Check -y setting to enable compute mode

[Claymore]

v14.7:

- now the miner driver does not require switching Windows to Test Mode. If you want to turn Test Mode off, use "-driver uninstall" option (with admin rights) and reboot,
   then start miner with admin rights to install new driver automatically when necessary (or use "-driver install" option directly).
   If you have any problems with signed driver you can use "-driver install_test" option, it uses old approach: enables Test Mode (reboot is required) and installs unsigned driver.
- added "-showpower" option for stats about GPU power consumption, press "s" to see it. Both AMD and Nvidia cards are supported, except Linux gpu-pro drivers and Radeon7 cards.
- updated Remote Manager to show total power consumption.
- fixed issue with "-logsmaxsize" option when "-logfile" option is used to specify directory for log files.
- a few minor bug fixes and improvements.

[angelbbs]

v14.7:
- added "-showpower" option for stats about GPU power consumption, press "s" to see it. Both AMD and Nvidia cards are supported, except Linux gpu-pro drivers and Radeon7 cards.

Wrong power consumption for AMD RX560

GPU #0: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 2:0:0)
GPU #1: Baffin (Radeon RX 560 Series), 4096 MB available, 16 compute units (pci bus 7:0:0)
GPU #2: Baffin (Radeon RX 560 Series), 4096 MB available, 16 compute units (pci bus 8:0:0)
GPU #3: Baffin (Radeon RX 560 Series), 4096 MB available, 16 compute units (pci bus 9:0:0)
ETH - Total Speed: 74.835 Mh/s, Total Shares: 31(13+5+5+8), Rejected: 2(2+0+0+0), Time: 00:31
ETH: GPU0 30.723 Mh/s, GPU1 14.752 Mh/s, GPU2 14.588 Mh/s, GPU3 14.772 Mh/s
Incorrect ETH shares: none
1 minute average ETH total speed: 74.848 Mh/s
Pool switches: ETH - 0
Pool shares accepting time (1 hour stats) - min 125 ms, max 2496 ms, average 253  ms
Current ETH share target: 0x00000000ffff0000 (diff: 4295MH), epoch 265(3.07GB)
Current -dcri values: -dcri 6,8,6,6
GPU0 t=69C fan=100% P=125W, GPU1 t=69C fan=96% P=31W, GPU2 t=69C fan=40% P=22W, GPU3 t=68C fan=46% P=32W
Total GPUs power consumption: 210 Watts

[Claymore]

Wrong power consumption for AMD RX560

Miner just shows values that are returned by video driver. If video driver reports wrong value, you will see wrong value. BTW, you must see same values in GPU-Z.