Xazax310
Member
 Offline
Activity: 246
Merit: 24
|
 |
June 17, 2019, 10:12:11 PM |
|
Hey all, I cannot get STRAP function to work with claymore 14.6 and 14.7 for 13 RX470 4GBs. It will Crash windows/reboot everytime. I Tested each card one at the time, when I get to the 5th card STRAP function works fine. However when I plug in the 6th card that's when it crashes loading STRAPs. regardless of what GPU I use/plugin it crashes on the 6th GPU. Anyone have any ideas?  ? |
|
|
|
|
|
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
|
Didldak
Full Member
Offline
Activity: 150
Merit: 100
Oh boy!
|
|
June 17, 2019, 10:55:12 PM |
|
Any luck with rxboost on linux?
|
Hey.. watsup.
|
|
|
|
UnclWish
|
|
June 17, 2019, 11:21:56 PM |
|
Hey all, I cannot get STRAP function to work with claymore 14.6 and 14.7 for 13 RX470 4GBs. It will Crash windows/reboot everytime. I Tested each card one at the time, when I get to the 5th card STRAP function works fine. However when I plug in the 6th card that's when it crashes loading STRAPs. regardless of what GPU I use/plugin it crashes on the 6th GPU. Anyone have any ideas? ? You can try to use -rxboost option without changings straps. |
|
|
|
|
WARMANGALAXY
Jr. Member
Offline
Activity: 69
Merit: 1
|
|
June 18, 2019, 01:00:32 AM |
|
DON,T WORK WITH GDDR6 GTX1660Ti  |
|
|
|
|
|
insaniak
|
|
June 18, 2019, 05:33:22 AM |
|
Ive been running just fine until update. Im getting Cuda error 11 cannot allocate big buffer for dag. Cannot create Dag file.
Using 7 GTX 1070s
Virtual Memory 20GB
Please Help
|
|
|
|
|
Jonet
Jr. Member
Offline
Activity: 82
Merit: 3
|
|
June 18, 2019, 07:09:13 AM |
|
Ive been running just fine until update. Im getting Cuda error 11 cannot allocate big buffer for dag. Cannot create Dag file.
Using 7 GTX 1070s
Virtual Memory 20GB
Please Help
20 is a bit a bit small. Claymore is consuming DAG size multiplied with number of GPUs and then some I suppose. I just set my 8GPU rigs to 32-40. |
|
|
|
|
1hkg
Newbie
Offline
Activity: 1
Merit: 0
|
|
June 18, 2019, 07:33:50 AM |
|
Using DAG repair driver on Windows 7 system, running 8 cards to report errors, only 6 cards can run normally. Version 11.0 can also run 8 cards normally. The latter 11.4-14.7 can not run normally 8 cards. http://chuantu.xyz/t6/702/1560843219x2073530527.png |
|
|
|
|
zertor
Jr. Member
Offline
Activity: 56
Merit: 6
|
|
June 18, 2019, 11:31:33 AM |
|
v14.7:
- added "-showpower" option for stats about GPU power consumption, press "s" to see it. Both AMD and Nvidia cards are supported, except
Power consumption is not working for 1050Ti |
|
|
|
|
zertor
Jr. Member
Offline
Activity: 56
Merit: 6
|
|
June 18, 2019, 01:26:13 PM |
|
Power consumption is not working for 1050Ti
The NVIDIA driver no longer reports this information on these cards.
Works fine for me as of 14.7. @forbiddenera Can you show a screenshot? And what VGA driver you are using? |
|
|
|
|
BenchZowner
Newbie
Offline
Activity: 80
Merit: 0
|
|
June 18, 2019, 03:43:23 PM |
|
can somebody help out with the driver feature ?
I ran "-driver uninstall" with admin rights.
Then if I run it with Admin Rights ( also tried with admin rights + -driver install in command line ) it doesn't seem to work.
I run it without admin rights and the driver switch command line and it says "driver is in use error".
claymore v14.7 with GTX 1080 Ti @ Win10 v1903 and GF drivers 418.21 or something like that.
|
|
|
|
|
johnsix12
Newbie
Offline
Activity: 6
Merit: 0
|
|
June 18, 2019, 06:10:54 PM |
|
hey guys can i mine monero with this rig?
|
|
|
|
|
ArmenianCracker
Newbie
Offline
Activity: 3
Merit: 0
|
|
June 18, 2019, 08:44:30 PM |
|
Ive been running just fine until update. Im getting Cuda error 11 cannot allocate big buffer for dag. Cannot create Dag file.
Using 7 GTX 1070s
Virtual Memory 20GB
Please Help
20 GB is not enough, at least it should be the total memory capacity of all your cards 7 * 8 = 56 GB more will be even better, about 70 will be good. |
|
|
|
|
WhackOBill
Jr. Member
Offline
Activity: 73
Merit: 3
|
|
June 18, 2019, 09:03:05 PM |
|
Ive been running just fine until update. Im getting Cuda error 11 cannot allocate big buffer for dag. Cannot create Dag file.
Using 7 GTX 1070s
Virtual Memory 20GB
Please Help
20 GB is not enough, at least it should be the total memory capacity of all your cards 7 * 8 = 56 GB more will be even better, about 70 will be good. Would the -gser parameter also help his case in lieu of more virtual memory space? |
|
|
|
|
|
UnclWish
|
|
June 18, 2019, 09:36:19 PM
Last edit: June 19, 2019, 07:27:27 AM by UnclWish |
|
hey guys can i mine monero with this rig?
You're asking our permission? I personally have nothing against. Your rig - mine what you want. |
|
|
|
|
|
TheHas
|
|
June 19, 2019, 04:59:52 AM |
|
Ive been running just fine until update. Im getting Cuda error 11 cannot allocate big buffer for dag. Cannot create Dag file.
Using 7 GTX 1070s
Virtual Memory 20GB
Please Help
20 GB is not enough, at least it should be the total memory capacity of all your cards 7 * 8 = 56 GB more will be even better, about 70 will be good. The higher the better. Problem is a lot of people don't have that much room on their hard drives for their mining rig. Think mine is like 80gb total so my entire rig with virtual memory cranked up probably just gets enough - will probably need to get larger hard drive if I get any more than my current 6 gpu's to avoid crashes, which could occur sometimes once a week with virtual memory too low. |
|
|
|
|
|
0xcosmos
|
|
June 19, 2019, 10:01:58 AM |
|
hey guys can i mine monero with this rig?
i guess you mean to ask if you can mine monero with this miner no you cannot claymore does not support cryptonight algorithm try xmr stak for it |
|
|
|
|
bperryman
Newbie
Offline
Activity: 21
Merit: 0
|
|
June 19, 2019, 10:24:12 AM |
|
hey guys can i mine monero with this rig?
i guess you mean to ask if you can mine monero with this miner no you cannot claymore does not support cryptonight algorithm try xmr stak for it Or...this https://bitcointalk.org/index.php?topic=638915.0 |
|
|
|
|
fractalyse
Newbie
Offline
Activity: 11
Merit: 0
|
|
June 19, 2019, 11:11:22 AM |
|
Claymore's Dual Ethereum + Decred/Siacoin/Lbry/Pascal/Blake2s/Keccak AMD+NVIDIA GPU Miner.
=========================
Latest version is v14.7 - Supercharged Edition:
-
-platform selects GPUs manufacturer. 1 - use AMD GPUs only. 2 - use NVIDIA GPUs only. 3 - use both AMD and NVIDIA GPUs. Default value is "3".
The option -platform doesn't work correctly when mixing two AMD platforms, vega20 and polaris10 in my case. - If Radevon VII only, claymore sees them. - If Radeon VII and RX570, claymore see only rx570 platform <- Here uis the bug. We cannot use claymore with two differents AMD platforms at the same time. |
|
|
|
|
|
laik2
|
|
June 19, 2019, 11:16:30 AM |
|
Claymore's Dual Ethereum + Decred/Siacoin/Lbry/Pascal/Blake2s/Keccak AMD+NVIDIA GPU Miner.
=========================
Latest version is v14.7 - Supercharged Edition:
-
-platform selects GPUs manufacturer. 1 - use AMD GPUs only. 2 - use NVIDIA GPUs only. 3 - use both AMD and NVIDIA GPUs. Default value is "3".
The option -platform doesn't work correctly when mixing two AMD platforms, vega20 and polaris10 in my case. - If Radevon VII only, claymore sees them. - If Radeon VII and RX570, claymore see only rx570 platform <- Here uis the bug. We cannot use claymore with two differents AMD platforms at the same time. That's not new, Claymore uses OpenCL API, not PCI bus enumeration to select platforms. |
|
|
|
johnsmith23
Newbie
Offline
Activity: 2
Merit: 0
|
|
June 19, 2019, 11:33:27 AM
Last edit: June 19, 2019, 11:44:51 AM by johnsmith23 |
|
Hi guys, i have new card Radeon VII, mines just fine with Claymore v14.7 @ 95-96 Mh/s with 65 degrees celsius but i cannot control the FANS of that card. Always works at 100%.
Tried everything - with AMD Global WattMan settings /cannot control from there, always going back to default settings/, with Afterburner is the same.
Please help urgent! Thank you in advance!
|
|
|
|
|
|
