[Guide] Dogie's Comprehensive ASICMiner Blade Setup

[pluMmet]

Ya still no go

[pluMmet]

In this video he uses 8.8.8.8 for DNS stuff. I tried that now too.

https://www.youtube.com/watch?v=XSbs35W8eqA

You were right about taking off the http stuff like this guy did

[ryanb]

i am trying to solo mine with the blade from the pi

but i keep getting credentials or url is incorrect

any ideas what do i need to check?

[xyzzy099]

i am trying to solo mine with the blade from the pi

but i keep getting credentials or url is incorrect

any ideas what do i need to check?

Are you connecting to your local bitcoind or bitcoin-qt?  If so, make sure you have the following lines in bitcoind.conf:

server=1
rpcuser=<yourusername>
rpcpassword=<yourpassword>

[ryanb]

i am connecting to oscoin

i have my conf file setup

rpcallowip=192.168.1.*
rpcconnect=192.168.1.* wallet ip address
rpcport=6332
listen=1
daemon=1
server=1

it still wont connect

[Trongersoll]

i am connecting to oscoin

i have my conf file setup

rpcallowip=192.168.1.*
rpcconnect=192.168.1.* wallet ip address
rpcport=6332
listen=1
daemon=1
server=1

it still wont connect

Does ozcoin accept getwork?

[xyzzy099]

i am connecting to oscoin

i have my conf file setup

rpcallowip=192.168.1.*
rpcconnect=192.168.1.* wallet ip address
rpcport=6332
listen=1
daemon=1
server=1

it still wont connect

You don't seem to have an rpcuser or rpcpassword.

[ryanb]

yes i have them but i didn't paste them in here

the pi address is different than the computer with wallet ip address

on bfgminer i have the ip to point to the wallet ip address correct?


it is working now

i had 2 servers running lol so it wasnt connecting

thanks

[xyzzy099]

yes i have them but i didn't paste them in here

If you are sure the username and pass match what you have in the blade config, I don't know what else might be wrong.  Maybe there is something in the debug.log that will help you.

[ryanb]

yes i have them but i didn't paste them in here

If you are sure the username and pass match what you have in the blade config, I don't know what else might be wrong.  Maybe there is something in the debug.log that will help you.

blocks are flowing in now

[Trongersoll]

yes i have them but i didn't paste them in here

If you are sure the username and pass match what you have in the blade config, I don't know what else might be wrong.  Maybe there is something in the debug.log that will help you.

blocks are flowing in now

what fixed it?

[pluMmet]

I've tried the stratum-mining-proxy and still no go...

So hard

[pluMmet]

Okay these setting got it working:



Thanks everyone

[ryanb]

yes i have them but i didn't paste them in here

If you are sure the username and pass match what you have in the blade config, I don't know what else might be wrong.  Maybe there is something in the debug.log that will help you.

blocks are flowing in now

what fixed it?

i had to wallet servers running at the same time

that was the error and one wallet with the wrong ip the blade could not connect to it

[pezlow010]

I have everything hocked up and ready to go, but I cant get the IP page to load and when I type in my IP which is 10.0.0.1 its xfinity it only brings me to my login page. The lights on the router are blinking orange and my xfinity pages says the UNKNOWN devices are offline. How do I change them to online so I can start mining with these new blades? Thanks

[rob143]

I've tried the stratum-mining-proxy and still no go...

So hard

I have been trying to get my mining_proxy to work also. I can get into my blade w/o any issues and change it's settings and I can get my mining proxy to talk to the pool I want to mine but I just seem to be missing the part where the blade and proxy are starting to talk

some info to see if anyone can sport my error:

On the Blade:

I have

Primary DNS: 8.8.8.8

Secondary DNS: 8.8.8.8

Port: 3332,3332

Sever Address: 192.168.1.10,192.168.1.10

usr:pword : usr:pword,usr:pword

my mining proxy is set like this

mining_proxy -o stratum.d7.lt -p 3333

so like I have said the problem is that I can't seem to get the 2 pieces to talk. I would appreciate any help.

[xyzzy099]

I've tried the stratum-mining-proxy and still no go...

So hard

I have been trying to get my mining_proxy to work also. I can get into my blade w/o any issues and change it's settings and I can get my mining proxy to talk to the pool I want to mine but I just seem to be missing the part where the blade and proxy are starting to talk

some info to see if anyone can sport my error:

On the Blade:

I have

Primary DNS: 8.8.8.8

Secondary DNS: 8.8.8.8

Port: 3332,3332

Sever Address: 192.168.1.10,192.168.1.10

usr:pword : usr:pword,usr:pword

my mining proxy is set like this

mining_proxy -o stratum.d7.lt -p 3333

so like I have said the problem is that I can't seem to get the 2 pieces to talk. I would appreciate any help.

On the blades, the PORTS should be set to 8332,8332 - not 3332,3332.

[RicRock]

Primary DNS: 8.8.8.8

Secondary DNS: 8.8.8.8

Port: 3332,3332

Sever Address: 192.168.1.10,192.168.1.10

usr:pword : usr:pword,usr:pword

my mining proxy is set like this

mining_proxy -o stratum.d7.lt -p 3333

so like I have said the problem is that I can't seem to get the 2 pieces to talk. I would appreciate any help.

hmm... don't you need a -gp setting on your proxy... getting error on proxy when it starts?

proxy running on 192.168.1.10?

[rob143]

I knew I had to be missing something, I feel kind of dumb for missing something so obvious. The strange thing is that the proxy seems to be working fine but it is hard to tell when the wrong ports are set.

[pezlow010]

IP   192.168.1.200
Mask   255.255.255.0
Gateway   192.168.1.1
WEB Port   8000
Primary DNS   8.8.8.8
Secondary DNS   8.8.8.8
Ports   8332,8332
Server addresses   api.bitcoin.cz,api.bitcoin.cz
user:pass   ----------,------------

this is what I finally got after changing my main IP address and getting to the configure page, but I my blade isnt hashing. If I use slush's pool can my blade mine without my computer being on and can someone help me configure my first blade so I can do the rest? Im a newbie when it comes to any of this and I don't understand proxy or stratum and so on so please be nice. Thanks