hafidh6
Newbie
 Offline
Activity: 12
Merit: 0
|
 |
March 27, 2018, 09:31:17 PM |
|
Please i want to know why i have this problem in some rigs and in the others i don't have it https://prnt.sc/iwzr62I added the -amd to the bat file and with the same bat some rigs work fine Do you have Nvidia drivers installed on the same machine? Maybe remove them to see if that helps? P006: Immediately after starting, PhoenixMiner stops working and the last message is "debugger detected" S: If you have only Nvidia cards, add the option -nvidia to the PhoenixMiner.exe command line. If you have only AMD cards, add the option -amd to the command line. First i don't have any nvidia Second i got this problem after i reinstalled wondows 10 Maybe i must install a compiler or anything to make it work fine For your information Claymore works fine Maybe just do a new install of PM I see you have a 2.6 folder heirarchy yet have tried 2.8. maybe do a quick install on your desktop, Fix the BAT to run off of desktop link to check that its just a path reference issue. Good Luck This problem was in 2.6 version i download the 2.8 beta and and i put it in the same folder and this is not the problem try to guide us to the solution i tried all the versions and no way with phoenix and claymore works fine why ?? Can you copy the application part of bat file so we can see it? Then what is the complete folder path of the same bat file? setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 PhoenixMiner.exe -pool etc-eu1.nanopool.org:19999 -wal 0x6e321eb4bc17f5f8e91b2606****e06ab14ae061.hafidh2/**************@gmail.com -pass x -amd This is my bat file |
|
|
|
|
|
|
|
|
|
|
|
"Your bitcoin is secured in a way that is physically impossible for others to access, no matter for what reason, no matter how good the excuse, no matter a majority of miners, no matter what." -- Greg Maxwell
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
lesjokolat
Jr. Member
Offline
Activity: 117
Merit: 3
|
|
March 27, 2018, 11:02:54 PM |
|
Please i want to know why i have this problem in some rigs and in the others i don't have it https://prnt.sc/iwzr62I added the -amd to the bat file and with the same bat some rigs work fine Do you have Nvidia drivers installed on the same machine? Maybe remove them to see if that helps? P006: Immediately after starting, PhoenixMiner stops working and the last message is "debugger detected" S: If you have only Nvidia cards, add the option -nvidia to the PhoenixMiner.exe command line. If you have only AMD cards, add the option -amd to the command line. First i don't have any nvidia Second i got this problem after i reinstalled wondows 10 Maybe i must install a compiler or anything to make it work fine For your information Claymore works fine Maybe just do a new install of PM I see you have a 2.6 folder heirarchy yet have tried 2.8. maybe do a quick install on your desktop, Fix the BAT to run off of desktop link to check that its just a path reference issue. Good Luck This problem was in 2.6 version i download the 2.8 beta and and i put it in the same folder and this is not the problem try to guide us to the solution i tried all the versions and no way with phoenix and claymore works fine why ?? Can you copy the application part of bat file so we can see it? Then what is the complete folder path of the same bat file? setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 PhoenixMiner.exe -pool etc-eu1.nanopool.org:19999 -wal 0x6e321eb4bc17f5f8e91b2606****e06ab14ae061.hafidh2/**************@gmail.com -pass x -amd This is my bat file Try adding -allpools 1 to bat line then see if it works |
|
|
|
|
speed07
Newbie
Offline
Activity: 28
Merit: 0
|
|
March 28, 2018, 02:02:01 AM |
|
17617:12:22:59.708: main Phoneix Miner 2.8b Windows/msvc - Release
17617:12:22:59.708: main Cmd line:
17617:12:22:59.708: main config.txt: -pool eu1-etc.ethermine.org:4444 -pool2 us1-etc.ethermine.org:4444 -wal 0xd07e049700388d961068b92e28a9a86064b67986.letjen2 -clkernel 2 -amd
17617:12:23:00.302: main Available GPUs for mining:
17617:12:23:00.302: main GPU1: Radeon RX 570 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU2: Radeon RX 570 Series (pcie 2), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU3: Radeon RX 570 Series (pcie 3), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU4: Radeon RX 570 Series (pcie 4), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU5: Radeon RX 570 Series (pcie 5), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU6: Radeon RX 570 Series (pcie 6), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.330: main ADL library initialized
always stuck like that. From v6 to v8b, how to fix it? Let me know, tk u
So, version 2.6 was working properly or it had the same problem? Also, does the miner just freezes or crashes (exits)? same problem, miner exits. My rig nitro+ rx 570 8G |
|
|
|
|
lesjokolat
Jr. Member
Offline
Activity: 117
Merit: 3
|
|
March 28, 2018, 02:56:26 AM |
|
17617:12:22:59.708: main Phoneix Miner 2.8b Windows/msvc - Release
17617:12:22:59.708: main Cmd line:
17617:12:22:59.708: main config.txt: -pool eu1-etc.ethermine.org:4444 -pool2 us1-etc.ethermine.org:4444 -wal 0xd07e049700388d961068b92e28a9a86064b67986.letjen2 -clkernel 2 -amd
17617:12:23:00.302: main Available GPUs for mining:
17617:12:23:00.302: main GPU1: Radeon RX 570 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU2: Radeon RX 570 Series (pcie 2), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU3: Radeon RX 570 Series (pcie 3), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU4: Radeon RX 570 Series (pcie 4), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU5: Radeon RX 570 Series (pcie 5), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU6: Radeon RX 570 Series (pcie 6), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.330: main ADL library initialized
always stuck like that. From v6 to v8b, how to fix it? Let me know, tk u
So, version 2.6 was working properly or it had the same problem? Also, does the miner just freezes or crashes (exits)? same problem, miner exits. My rig nitro+ rx 570 8G in your config if you add line... -allpools 1 does it help? |
|
|
|
|
tide881155
Newbie
Offline
Activity: 23
Merit: 0
|
|
March 28, 2018, 03:54:54 AM |
|
Please i want to know why i have this problem in some rigs and in the others i don't have it https://prnt.sc/iwzr62I added the -amd to the bat file and with the same bat some rigs work fine Do you have Nvidia drivers installed on the same machine? Maybe remove them to see if that helps? P006: Immediately after starting, PhoenixMiner stops working and the last message is "debugger detected" S: If you have only Nvidia cards, add the option -nvidia to the PhoenixMiner.exe command line. If you have only AMD cards, add the option -amd to the command line. First i don't have any nvidia Second i got this problem after i reinstalled wondows 10 Maybe i must install a compiler or anything to make it work fine For your information Claymore works fine Maybe just do a new install of PM I see you have a 2.6 folder heirarchy yet have tried 2.8. maybe do a quick install on your desktop, Fix the BAT to run off of desktop link to check that its just a path reference issue. Good Luck This problem was in 2.6 version i download the 2.8 beta and and i put it in the same folder and this is not the problem try to guide us to the solution i tried all the versions and no way with phoenix and claymore works fine why ?? Can you copy the application part of bat file so we can see it? Then what is the complete folder path of the same bat file? setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 PhoenixMiner.exe -pool etc-eu1.nanopool.org:19999 -wal 0x6e321eb4bc17f5f8e91b2606****e06ab14ae061.hafidh2/**************@gmail.com -pass x -amd This is my bat file Try -proto 3 (if will not help try change values from 1 to 4) |
|
|
|
|
speed07
Newbie
Offline
Activity: 28
Merit: 0
|
|
March 28, 2018, 04:50:54 AM |
|
17617:12:22:59.708: main Phoneix Miner 2.8b Windows/msvc - Release
17617:12:22:59.708: main Cmd line:
17617:12:22:59.708: main config.txt: -pool eu1-etc.ethermine.org:4444 -pool2 us1-etc.ethermine.org:4444 -wal 0xd07e049700388d961068b92e28a9a86064b67986.letjen2 -clkernel 2 -amd
17617:12:23:00.302: main Available GPUs for mining:
17617:12:23:00.302: main GPU1: Radeon RX 570 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU2: Radeon RX 570 Series (pcie 2), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU3: Radeon RX 570 Series (pcie 3), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU4: Radeon RX 570 Series (pcie 4), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU5: Radeon RX 570 Series (pcie 5), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU6: Radeon RX 570 Series (pcie 6), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.330: main ADL library initialized
always stuck like that. From v6 to v8b, how to fix it? Let me know, tk u
So, version 2.6 was working properly or it had the same problem? Also, does the miner just freezes or crashes (exits)? same problem, miner exits. My rig nitro+ rx 570 8G in your config if you add line... -allpools 1 does it help? 17618:11:47:02.397: main Phoneix Miner 2.8b Windows/msvc - Release 17618:11:47:02.397: main Cmd line: 17618:11:47:02.397: main config.txt: -pool eu1-etc.ethermine.org:4444 -pool2 us1-etc.ethermine.org:4444 -wal 0xd07e049700388d961068b92e28a9a86064b67986.letjen2 -clkernel 2 -amd -allpools 1 17618:11:47:02.980: main Available GPUs for mining: 17618:11:47:02.980: main GPU1: Radeon RX 570 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 32 CUs 17618:11:47:02.980: main GPU2: Radeon RX 570 Series (pcie 2), OpenCL 2.0, 8 GB VRAM, 32 CUs 17618:11:47:02.980: main GPU3: Radeon RX 570 Series (pcie 3), OpenCL 2.0, 8 GB VRAM, 32 CUs 17618:11:47:02.980: main GPU4: Radeon RX 570 Series (pcie 4), OpenCL 2.0, 8 GB VRAM, 32 CUs 17618:11:47:02.980: main GPU5: Radeon RX 570 Series (pcie 5), OpenCL 2.0, 8 GB VRAM, 32 CUs 17618:11:47:02.980: main GPU6: Radeon RX 570 Series (pcie 6), OpenCL 2.0, 8 GB VRAM, 32 CUs 17618:11:47:03.005: main ADL library initialized still problem.. |
|
|
|
|
lesjokolat
Jr. Member
Offline
Activity: 117
Merit: 3
|
|
March 28, 2018, 05:03:02 AM |
|
17617:12:22:59.708: main Phoneix Miner 2.8b Windows/msvc - Release
17617:12:22:59.708: main Cmd line:
17617:12:22:59.708: main config.txt: -pool eu1-etc.ethermine.org:4444 -pool2 us1-etc.ethermine.org:4444 -wal 0xd07e049700388d961068b92e28a9a86064b67986.letjen2 -clkernel 2 -amd
17617:12:23:00.302: main Available GPUs for mining:
17617:12:23:00.302: main GPU1: Radeon RX 570 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU2: Radeon RX 570 Series (pcie 2), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU3: Radeon RX 570 Series (pcie 3), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU4: Radeon RX 570 Series (pcie 4), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU5: Radeon RX 570 Series (pcie 5), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU6: Radeon RX 570 Series (pcie 6), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.330: main ADL library initialized
always stuck like that. From v6 to v8b, how to fix it? Let me know, tk u
So, version 2.6 was working properly or it had the same problem? Also, does the miner just freezes or crashes (exits)? same problem, miner exits. My rig nitro+ rx 570 8G in your config if you add line... -allpools 1 does it help? 17618:11:47:02.397: main Phoneix Miner 2.8b Windows/msvc - Release 17618:11:47:02.397: main Cmd line: 17618:11:47:02.397: main config.txt: -pool eu1-etc.ethermine.org:4444 -pool2 us1-etc.ethermine.org:4444 -wal 0xd07e049700388d961068b92e28a9a86064b67986.letjen2 -clkernel 2 -amd -allpools 1 17618:11:47:02.980: main Available GPUs for mining: 17618:11:47:02.980: main GPU1: Radeon RX 570 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 32 CUs 17618:11:47:02.980: main GPU2: Radeon RX 570 Series (pcie 2), OpenCL 2.0, 8 GB VRAM, 32 CUs 17618:11:47:02.980: main GPU3: Radeon RX 570 Series (pcie 3), OpenCL 2.0, 8 GB VRAM, 32 CUs 17618:11:47:02.980: main GPU4: Radeon RX 570 Series (pcie 4), OpenCL 2.0, 8 GB VRAM, 32 CUs 17618:11:47:02.980: main GPU5: Radeon RX 570 Series (pcie 5), OpenCL 2.0, 8 GB VRAM, 32 CUs 17618:11:47:02.980: main GPU6: Radeon RX 570 Series (pcie 6), OpenCL 2.0, 8 GB VRAM, 32 CUs 17618:11:47:03.005: main ADL library initialized still problem.. 2.8b has new kernals for the 570 remove the clkernal 2 or change it to 0 to see if that helps |
|
|
|
|
speed07
Newbie
Offline
Activity: 28
Merit: 0
|
|
March 28, 2018, 05:06:27 AM |
|
17617:12:22:59.708: main Phoneix Miner 2.8b Windows/msvc - Release
17617:12:22:59.708: main Cmd line:
17617:12:22:59.708: main config.txt: -pool eu1-etc.ethermine.org:4444 -pool2 us1-etc.ethermine.org:4444 -wal 0xd07e049700388d961068b92e28a9a86064b67986.letjen2 -clkernel 2 -amd
17617:12:23:00.302: main Available GPUs for mining:
17617:12:23:00.302: main GPU1: Radeon RX 570 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU2: Radeon RX 570 Series (pcie 2), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU3: Radeon RX 570 Series (pcie 3), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU4: Radeon RX 570 Series (pcie 4), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU5: Radeon RX 570 Series (pcie 5), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU6: Radeon RX 570 Series (pcie 6), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.330: main ADL library initialized
always stuck like that. From v6 to v8b, how to fix it? Let me know, tk u
So, version 2.6 was working properly or it had the same problem? Also, does the miner just freezes or crashes (exits)? same problem, miner exits. My rig nitro+ rx 570 8G in your config if you add line... -allpools 1 does it help? 17618:11:47:02.397: main Phoneix Miner 2.8b Windows/msvc - Release 17618:11:47:02.397: main Cmd line: 17618:11:47:02.397: main config.txt: -pool eu1-etc.ethermine.org:4444 -pool2 us1-etc.ethermine.org:4444 -wal 0xd07e049700388d961068b92e28a9a86064b67986.letjen2 -clkernel 2 -amd -allpools 1 17618:11:47:02.980: main Available GPUs for mining: 17618:11:47:02.980: main GPU1: Radeon RX 570 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 32 CUs 17618:11:47:02.980: main GPU2: Radeon RX 570 Series (pcie 2), OpenCL 2.0, 8 GB VRAM, 32 CUs 17618:11:47:02.980: main GPU3: Radeon RX 570 Series (pcie 3), OpenCL 2.0, 8 GB VRAM, 32 CUs 17618:11:47:02.980: main GPU4: Radeon RX 570 Series (pcie 4), OpenCL 2.0, 8 GB VRAM, 32 CUs 17618:11:47:02.980: main GPU5: Radeon RX 570 Series (pcie 5), OpenCL 2.0, 8 GB VRAM, 32 CUs 17618:11:47:02.980: main GPU6: Radeon RX 570 Series (pcie 6), OpenCL 2.0, 8 GB VRAM, 32 CUs 17618:11:47:03.005: main ADL library initialized still problem.. 2.8b has new kernals for the 570 remove the clkernal 2 or change it to 0 to see if that helps changed & still problem.. |
|
|
|
|
lesjokolat
Jr. Member
Offline
Activity: 117
Merit: 3
|
|
March 28, 2018, 05:41:51 AM |
|
17617:12:22:59.708: main Phoneix Miner 2.8b Windows/msvc - Release
17617:12:22:59.708: main Cmd line:
17617:12:22:59.708: main config.txt: -pool eu1-etc.ethermine.org:4444 -pool2 us1-etc.ethermine.org:4444 -wal 0xd07e049700388d961068b92e28a9a86064b67986.letjen2 -clkernel 2 -amd
17617:12:23:00.302: main Available GPUs for mining:
17617:12:23:00.302: main GPU1: Radeon RX 570 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU2: Radeon RX 570 Series (pcie 2), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU3: Radeon RX 570 Series (pcie 3), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU4: Radeon RX 570 Series (pcie 4), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU5: Radeon RX 570 Series (pcie 5), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU6: Radeon RX 570 Series (pcie 6), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.330: main ADL library initialized
always stuck like that. From v6 to v8b, how to fix it? Let me know, tk u
So, version 2.6 was working properly or it had the same problem? Also, does the miner just freezes or crashes (exits)? same problem, miner exits. My rig nitro+ rx 570 8G in your config if you add line... -allpools 1 does it help? 17618:11:47:02.397: main Phoneix Miner 2.8b Windows/msvc - Release 17618:11:47:02.397: main Cmd line: 17618:11:47:02.397: main config.txt: -pool eu1-etc.ethermine.org:4444 -pool2 us1-etc.ethermine.org:4444 -wal 0xd07e049700388d961068b92e28a9a86064b67986.letjen2 -clkernel 2 -amd -allpools 1 17618:11:47:02.980: main Available GPUs for mining: 17618:11:47:02.980: main GPU1: Radeon RX 570 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 32 CUs 17618:11:47:02.980: main GPU2: Radeon RX 570 Series (pcie 2), OpenCL 2.0, 8 GB VRAM, 32 CUs 17618:11:47:02.980: main GPU3: Radeon RX 570 Series (pcie 3), OpenCL 2.0, 8 GB VRAM, 32 CUs 17618:11:47:02.980: main GPU4: Radeon RX 570 Series (pcie 4), OpenCL 2.0, 8 GB VRAM, 32 CUs 17618:11:47:02.980: main GPU5: Radeon RX 570 Series (pcie 5), OpenCL 2.0, 8 GB VRAM, 32 CUs 17618:11:47:02.980: main GPU6: Radeon RX 570 Series (pcie 6), OpenCL 2.0, 8 GB VRAM, 32 CUs 17618:11:47:03.005: main ADL library initialized still problem.. 2.8b has new kernals for the 570 remove the clkernal 2 or change it to 0 to see if that helps changed & still problem.. the epools file what is it set up with? maybe a bad addressss in there? |
|
|
|
|
nitrobg
Member
Offline
Activity: 413
Merit: 17
|
|
March 28, 2018, 06:39:47 AM |
|
changed & still problem..
Try resetting your cards to default clocks. It might be overclock related. |
|
|
|
|
hafidh6
Newbie
Offline
Activity: 12
Merit: 0
|
|
March 28, 2018, 07:14:03 AM |
|
Please i want to know why i have this problem in some rigs and in the others i don't have it https://prnt.sc/iwzr62I added the -amd to the bat file and with the same bat some rigs work fine Do you have Nvidia drivers installed on the same machine? Maybe remove them to see if that helps? P006: Immediately after starting, PhoenixMiner stops working and the last message is "debugger detected" S: If you have only Nvidia cards, add the option -nvidia to the PhoenixMiner.exe command line. If you have only AMD cards, add the option -amd to the command line. First i don't have any nvidia Second i got this problem after i reinstalled wondows 10 Maybe i must install a compiler or anything to make it work fine For your information Claymore works fine Maybe just do a new install of PM I see you have a 2.6 folder heirarchy yet have tried 2.8. maybe do a quick install on your desktop, Fix the BAT to run off of desktop link to check that its just a path reference issue. Good Luck This problem was in 2.6 version i download the 2.8 beta and and i put it in the same folder and this is not the problem try to guide us to the solution i tried all the versions and no way with phoenix and claymore works fine why ?? Can you copy the application part of bat file so we can see it? Then what is the complete folder path of the same bat file? setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 PhoenixMiner.exe -pool etc-eu1.nanopool.org:19999 -wal 0x6e321eb4bc17f5f8e91b2606****e06ab14ae061.hafidh2/**************@gmail.com -pass x -amd This is my bat file Try adding -allpools 1 to bat line then see if it works The same problem it gives me the debugger problem not pools problem Try to find this issue because it works with some windows version and not working with others |
|
|
|
|
murgorx
Member
Offline
Activity: 443
Merit: 13
|
|
March 28, 2018, 07:19:00 AM |
|
Guys, are you using the latest AMD drivers btw? I am currently with 18.1.1 and I do not know if I should upgrade to the latest, because everytime I try to update my drivers I end up spending two days configuring the stupid rig... Is it worth it or there's nothing special about them?
EDIT : I am talking about the New Optional - 18.3.4 drivers btw.
|
|
|
|
|
speed07
Newbie
Offline
Activity: 28
Merit: 0
|
|
March 28, 2018, 08:21:53 AM |
|
changed & still problem..
Try resetting your cards to default clocks. It might be overclock related. but claymore can run without problem. |
|
|
|
|
|
UnclWish
|
|
March 28, 2018, 09:41:40 AM |
|
changed & still problem..
Try resetting your cards to default clocks. It might be overclock related. but claymore can run without problem. Does your system have enough page file size? You must set it to 6x8Gb = 48Gb. And these prameters is needed: setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 Without them miner exists. |
|
|
|
|
peterboy1
Newbie
Offline
Activity: 168
Merit: 0
|
|
March 28, 2018, 09:54:36 AM |
|
Guys, are you using the latest AMD drivers btw? I am currently with 18.1.1 and I do not know if I should upgrade to the latest, because everytime I try to update my drivers I end up spending two days configuring the stupid rig... Is it worth it or there's nothing special about them?
EDIT : I am talking about the New Optional - 18.3.4 drivers btw.
why the hell would you need 2 days for driver update? ddu, wait for installation, and regedit that compute mode (because fuck that amd settings lag). |
|
|
|
|
sefirotius
Full Member
Offline
Activity: 658
Merit: 102
IDENA.IO - Proof-Of-Person Blockchain
|
|
March 28, 2018, 10:15:54 AM |
|
were is download phoenix miner 2.8b
|
|
|
|
|
|
[Senior Member] ▄▄▄ ▀▀▀▀▀▀▀▀▀ ▄▄▄ ▄▀▀ ▄▄▄▄▄▄▄▄▄ ▀▀▄ ▄▀▀ ▄▄▀█ ▀█▀▄▄ ▀▀▄ ▄▀▀ ▄▄▀ ▀▀▄▄▄▄▄▄▄▀▀ ▀▄▄ ▀▀▄ █ █ ▀ █ █ ▄▀ █ ▀▄▄ ▄█▀ █ ▀▄ ▄▀ ▄▀ █▄ ▀▀▀██▄▄▄ ▄▄▄██▀▀ ██ ▀▄ ▀▄ ▀▄▀▀▄ ██ ▄▄▄▄▄▄ ▀▄ ▄▀ ▄▄▄▄▄▄ ██ ▄▀▀▄▀ ██ █ ██ ▀▄ ▀▄ █ █ ▄▀ ▄▀ ██ █ ▀██ █ ▄█ ▀█ ▀▀▀▀▀▀▀ █ █ ▀▀▀▀▀▀▀ █ █▄ █ █▀ █ █ █ █ █ █ █ █ ▀▀ █▀ ▄▀ █▀▄ █ █ ▄▀█ ▀▄ ▀█ ▄ █▀ █ ▀█▄ ▀ ▀ ▄█▀ █ ▄▀█ ▄ █▄▀ █ █ █ █ ▀▄█ ▀▄ █ ▀█ ▄▄▀▄▀▄▄ █▀ █ ▄ ▀▄▀▀ █▄ █ ▀█ ▀▀▀ █▀ █ ▄█ ▄▀▀▄▀ ▀ ▄ ██ █▀▄ ▀▀▄▄▄▀▀ ▄▀█ ██ ▀▄ ▀ ▀█ ██ █ █▀▄ ▄▄▄▄▄ ▄▀█ █ ██ █▀ ▀▄ ▀ █ █ ██▄ ▄██ █ █ ▀ ▄▀ ▀▄ █ █ █ ▀█▄ ▄█▀ █ █ █ ▄▀ ▀▀▄█ █ ▀▀▀▀▀ █ █▄▀▀ ▀▀ ▄▄▄▄▄▄▄▄▄▄▄ ▀▀ I D E N A Proof-of-Person Blockchain Join the mining of the first human-centric cryptocurrency │ │ │ ▲ 2 6 8 0 N O D E S ██ ██ ██ ██ ██ ▄ ██ ▄ ███▄ ██ ▄███ ▀███▄ ██ ▄███▀ ▀████████▀ ▀████▀ ▀▀ ██▄ ▄██ ███ ███ ███ ███ ███ ███ ███▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄███ ▀▀██████████████████████████▀▀ D O W N L O A D Idena node ▐ ▄▄████████▄▄ ▄███▀▀ ▀▀███▄ ▄██▀ ▀██▄ ▄██ ▄▄▄ ██▄ ▄██ ▄▄▄██████ ██▄ ██ ▄▄▄███████▀████ ██ ██ ▀█████████▀ ▄████ ██ ██ ▀████▀ ▄██████ ██ ██ ▀ ▄███████ ██ ▀██ ██▀█████ ██▀ ▀██ █ ▀██ ██▀ ▀██▄ ▄██▀ ▀███▄▄ ▄▄███▀ ▀▀████████▀▀ ▄▄▄██████▄▄▄ ▄▄████████████████▄▄ ▄█████▀▀ ▀▀█████▄ ████▀ ▀████ ███▀ ▄▄▄▄▄▄▄▄▄ ▀███ ███ █ ▄▄ █▀▄ ███ ██▀ █ ███ █ ▀▄ ▀██ ███ █ ▀▀ ▀▀▀▀█ ███ ███ █ ▄▄▄▄▄▄ █ ███ ███ █ ▄▄▄▄▄▄ █ ███ ██▄ █ ▄▄▄▄▄▄ █ ▄██ ███ █ █ ███ ███▄ ▀▀▀▀▀▀▀▀▀▀▀▀ ▄███ ████▄ ▄████ ▀█████▄▄ ▄▄█████▀ ▀▀████████████████▀▀ ▀▀▀██████▀▀▀ ▄▄████████▄▄ ▄███▀▀ ▀▀███▄ ▄██▀ ▀██▄ ▄██ ▄▄▄ ██▄ ▄██ █▄ █████▄▀ ██▄ ██ ███▄▄ ▄▄██████▀ ██ ██ ██████████████ ██ ██ █████████████ ██ ██ ▀██████████ ██ ▀██ ▄████████▀ ██▀ ▀██ ▄▄████████▀▀ ██▀ ▀██▄ ▄██▀ ▀███▄▄ ▄▄███▀ ▀▀████████▀▀ ███ █ █ █ █ █ ███ REQUEST INVITATION ███ █ █ █ █ █ ███ Code: [ |
|
|
RooiWillie
Newbie
Offline
Activity: 14
Merit: 0
|
|
March 28, 2018, 10:26:08 AM |
|
Hardware control options (AMD cards only; use comma to specify different values for each GPU):
-tt <n> Set fan control target temperature (special values: 0 - no HW monitoring on ALL cards,
1-4 - only monitoring on all cards with 30-120 seconds interval, negative - fixed fan speed at n %)
Setting -tt 4 as per the quote above, only shows the GPU Temp and fan speed line every 120 seconds. Is the same possible for the GPU hashrate stats lines? |
|
|
|
|
murgorx
Member
Offline
Activity: 443
Merit: 13
|
|
March 28, 2018, 10:33:37 AM |
|
Guys, are you using the latest AMD drivers btw? I am currently with 18.1.1 and I do not know if I should upgrade to the latest, because everytime I try to update my drivers I end up spending two days configuring the stupid rig... Is it worth it or there's nothing special about them?
EDIT : I am talking about the New Optional - 18.3.4 drivers btw.
why the hell would you need 2 days for driver update? ddu, wait for installation, and regedit that compute mode (because fuck that amd settings lag). Ye, normally I can say for myself, that I am a bit tech-savvier than the average Joe, but I simply cannot understand whats with up with rig, when I install new drivers! It really pisses me off, because literally I cannot setup the cards for a long time after the new driver installation lul. |
|
|
|
|
|
UnclWish
|
|
March 28, 2018, 10:43:59 AM |
|
were is download phoenix miner 2.8b
Don't be lazy, look 2-3 last pages. |
|
|
|
|
janding
Jr. Member
Offline
Activity: 170
Merit: 6
|
|
March 28, 2018, 08:33:08 PM |
|
Guys, are you using the latest AMD drivers btw? I am currently with 18.1.1 and I do not know if I should upgrade to the latest, because everytime I try to update my drivers I end up spending two days configuring the stupid rig... Is it worth it or there's nothing special about them?
EDIT : I am talking about the New Optional - 18.3.4 drivers btw.
why the hell would you need 2 days for driver update? ddu, wait for installation, and regedit that compute mode (because fuck that amd settings lag). Question: Can you explain the regedit ? I mean I know what it is and how to use it but what are you editing. When I upgrade or install new drivers I simply set it to compute mode when it's finished. Is there some registry setting that you are also adjusting ? Maybe these is something else that I should do other than set to compute mode. Thanks |
|
|
|
|
|
