Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Claymore]

Claymore - any plans to add ETH clones support, such as soil, expanse etc?

Devfee is not a problem. It is something related to tech part.
As far as I understand, you cannot mine these coins with ethminer from Ethereum, you have to use ethminer from Expanse, am I correct?

You can mine any Dagger-Hashimoto coin with any ethminer (original or Genoil)...
It doesn't work, tried both Dwarf and suprnova... just disconnects and trying to reconnect.

Pls try it out: http://dwarfpool.com/exp

Ok I'll check it.

[ailikun]

I'm working on next update:
- Further improvements related to DAG files, for example, even better stability when new epoch is coming, perhaps you already noticed that miner did not crash at new epoch #45 as official miner usually does.
- Performance improvements for weak cards and Fury.
- Checking shares on CPU and warn if GPU calculates them incorrectly (usually due to overclocking).

Can you port it to linux, too.
If its not a big problem.

[supersonic]

ethermine.org here shows 64 valid and 0 invalid....
the same in claymores miner.....

same here - all good, zero invalids.... hard to believe... 
even during using qtminer.exe, i do get a few invalids but not much.

I wish i can say the same for DCR, my pool have 8-9% average invalids/rejects.

Well those numbers are incorrect, because every time that it starts to mine for dev  the number of is reset when the worker reconnects to the pool - according to pool description on bottom of the page :>

[supersonic]

anyone using Sapphire 280x vapor? im getting only like 19Mh on those aint that to low?

[qqqq]

Is that really need to 1-2 weeks for solo ver. Is that so hard to implement ? Your vers 2.0 is very nice already.  

[forzendiablo]

@Claymore

great job man!

[arielbit]

anyone using Sapphire 280x vapor? im getting only like 19Mh on those aint that to low?

mine is ~20MH ETH and ~300MH DCR

1100 cclock and 1375 mclock

don't forget this on your .bat

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

[citronick]

ethermine.org here shows 64 valid and 0 invalid....
the same in claymores miner.....

same here - all good, zero invalids.... hard to believe... 
even during using qtminer.exe, i do get a few invalids but not much.

I wish i can say the same for DCR, my pool have 8-9% average invalids/rejects.

Well those numbers are incorrect, because every time that it starts to mine for dev  the number of is reset when the worker reconnects to the pool - according to pool description on bottom of the page :>

there is also running total submitted shares, and that number is active - it could only mean that the miner is connected not disconnected.
 

[citronick]

I'm working on next update:
- Further improvements related to DAG files, for example, even better stability when new epoch is coming, perhaps you already noticed that miner did not crash at new epoch #45 as official miner usually does.
- Performance improvements for weak cards and Fury.
- Checking shares on CPU and warn if GPU calculates them incorrectly (usually due to overclocking).

the v2 is very good Claymore - well done.

- any chance to improve the color used.... seems too dark
- solo mining features

thanks

[kanoptx]

anyone using Sapphire 280x vapor? im getting only like 19Mh on those aint that to low?

mine is ~20MH ETH and ~300MH DCR

1100 cclock and 1375 mclock

don't forget this on your .bat

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

how is this done? thx

[arielbit]

anyone using Sapphire 280x vapor? im getting only like 19Mh on those aint that to low?

mine is ~20MH ETH and ~300MH DCR

1100 cclock and 1375 mclock

don't forget this on your .bat

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

how is this done? thx

edit "start.bat" file

example from claymore start.bat .. notice i've added the clock settings in the syntax.

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F -epsw x -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal Redhex.my -dpsw x -wd 1 -cclock 1100 -mclock 1375

and read the "readme.txt" file you'll learn more 

[phzi]

edit "start.bat" file

example from claymore start.bat .. notice i've added the clock settings in the syntax.

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F -epsw x -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal Redhex.my -dpsw x -wd 1 -cclock 1100 -mclock 1375

and read the "readme.txt" file you'll learn more  

That won't do anything... you need to prefix those lines with setx

e.g.
setx GPU_FORCE_64BIT_PTR 0

[arielbit]

edit "start.bat" file

example from claymore start.bat .. notice i've added the clock settings in the syntax.

EDIT:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F -epsw x -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal Redhex.my -dpsw x -wd 1 -cclock 1100 -mclock 1375

and read the "readme.txt" file you'll learn more  

That won't do anything... you need to prefix those lines with setx

e.g.
setx GPU_FORCE_64BIT_PTR 0

yup, i forgot..copied it from the "readme.txt" file

[rdnkjdi]

You might get together with the guy from GPUShack who does Ethos.  I'm pretty sure you'd double or quadruple the hash fees you are getting from Windows overnight (and I'd be happy to be able to be able to watch my miner temps remotely)

[MacT]

 Decred is down   to .0031 btc today. Is it still worth dual mining?

[Twod]

I decided yesterday to try dual miner version 2.0. Launched only for ETH, on RU stratum DwarfPool. Half day miner worked normally, sending the balls even slightly larger and more stable than Genoil. I decided to leave for the night, in the morning and checked to see that the floor one night were rejections. How can this problem be solved. It lacks konekt check with the server and switching to another server when the dump.
http://uploads.ru/ID8dj.png

[supersonic]

anyone using Sapphire 280x vapor? im getting only like 19Mh on those aint that to low?

mine is ~20MH ETH and ~300MH DCR

1100 cclock and 1375 mclock

don't forget this on your .bat

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

I didnt forget it, altho i was running it on stock settings that is 1070 cclock and 1550 mclock

[ldw-com]

You might get together with the guy from GPUShack who does Ethos.  I'm pretty sure you'd double or quadruple the hash fees you are getting from Windows overnight (and I'd be happy to be able to be able to watch my miner temps remotely)

Or the other guy, with the FREE unix based os.

https://ethereum-mining.info/en/

[jesterRPG]

Everytime I set an overclock the program crashes. This is what's in my start.bat:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool us2.ethermine.org:4444 -ewal 0x54DAcC4a74d5C75f0184E9093c210E6313ACc6Ed.cvke -epsw x -esm 1 -mode 1 -tt 60 -cclock 1100

[avirdoz]

I've tried v.2.0. Near 10% redjects on coinmine.pl - 5x r9 380, win7 64 bit, 15.12 AMD drivers